Aperture 2 - Maybe a few small problems/bugs

After 2 solid days worth of playing around with Aperture v2, I was wondering if anyone else is having the same problems as me?
1. (Creating a new book) Can't File -> Print Book -> Save to PDF. It seems to die when it gets to around 30 pages.
2. (Trying to buy the book) Go through the sign-up process via Aperture. Following the steps, I add in CC details to my .mac details, click next (step 3 - I think) and it reports 'Unexpected error has occurred'. No joy now for 2 days.
I really need to get this book done and dusted!!
Any assistance would be much appreciated.

Anyway have any ideas?

Similar Messages

  • A few small issues I can't find fixes for

    Hi everyone, I've been using arch for a little bit now and really enjoying the experience. I have run across 3 small problems and other than that everything thing seems to be running flawlessly. I'd appreciate any help with these, and thanks in advance. I have googled trying to find solutions and searched the wiki but either none of the issues were listed or the fixes for them didn't seem to have an effect, but if I missed something sorry, just if you want to point me in the right direction that'd be appreciated.
    So some specifics about my system first, I'm running on arch linux 64bit using KDE as my desktop environment.
    Okay so problem number 1:
    Sometimes when arch goes to boot it fails to mount /dev/sda2 which is my root partition, This doesn't happen everytime but I'd say 50 or 60 percent of the time, but when it does I give it a restart once or twice and it loads into arch just fine. I can restart my computer if anyone wants the exact wording I get, but it goes along the lines of "failed to mount /dev/sda2 you are now being dropped in to a recovery shell" Now I'm not sure but this might be because of the weird way I set the harddrive partitions up, but it worked in all the distros I used before settling on arch, but to give you an idea, I'm using 2 300gb hard drives, I have them split so that 1 hard drive is completely devoted to my / and /boot partitions, the other one has /usr /tmp /var and swap on it. In addition I have a 1tb drive for storage that is devoted to /home. If it is causing the problem and I have to reformat and go to a more conventional partition scheme I will, but I'd prefer to avoid that if at all possible, just because I am rather settled in to this install.
    Problem number 2:
    Amarok takes forever and a day to load, somewhere in the area of 60+ seconds, when I start it via the terminal I get this output:
    KGlobal::locale::Warning your global KLocale is being recreated with a valid main component instead of a fake component, this usually means you tried to call i18n related functions before your main component was created. You should not do that since it most likely will not work
    (amarok:19322): GStreamer-CRITICAL **: gst_debug_add_log_function: assertion `func != NULL' failed
    amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    amarok(19322)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
    amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
    amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
    amarok(19322)/libplasma Plasma::FrameSvg::resizeFrame: Invalid size QSizeF(0, 0)
    amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Amarok Script Console"
    amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "LyricWiki"
    amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Cool Streams"
    amarok(19322)/kdecore (KPluginInfo) KPluginInfo::kcmServices: found 0 offers for "Librivox.org"
    ** AMAROK WAS STARTED IN NORMAL MODE. IF YOU WANT TO SEE DEBUGGING INFORMATION, PLEASE USE: **
    ** amarok --debug                                                                           **
    I thought maybe it was the gstreamer backend because the wiki said it might cause problems and to try using xine instead. However doing this didn't seem to help at all.
    Problem number 3
    Flash is all weird when I use Kwin, when I use compiz it works near flawlessly but my issue with that is then kde doesn't act nearly as smooth as it does without compiz. When I use flashplugin from the repos I can't go fullscreen because it makes everything freeze up, and when I try flashplugin-prerelease from the aur flash is always in the spot where it loaded meaning if I change tabs in firefox it goes through the other tab and if I scroll it stays stationary and everything else scrolls behind it.
    Again I apologize if I missed it in the searches that I ran and these have been solved elsewhere, but thanks in advance for all help given.
    Edit: Installing pulseaudio and using that instead of alsa seems to have fixed amarok starting slowly.
    Last edited by Sinner (2011-03-26 05:05:57)

    milomouse wrote:Maybe you should use UUIDs instead of /dev/sd* to avoid any possible device confusion (type 'blkid' to see your UUIDs), though from your first post about "cannot mount /dev/sda2" it still appears to check for root device correctly.  At any rate, in your grub or lilo or syslinux (whatever bootloader you have) config you could also change root=/dev/sda2 to root=/dev/disk/by-uuid/YOURROOTUUID (however your bootloader can handle it) to help further reduce possible errors.  (helpful link: https://wiki.archlinux.org/index.php/Pe … ice_naming )  Trying to think of what else it could be since it only happens every now and then, which is a little strange.
    Oh my bad I forgot to say I'm using grub, but yeah I went through and did that, That seemed to stop me being loaded into a recovery shell or whatever, but when arch started to boot about 2 out of the 5 times I restarted to test it, it said file systems didn't check and had my log in as root to try to remount the partition. Also I got a COMERROR=-32 after which it said it was doing a comreset and would retry in 8 seconds after doing that 3 times it booted almost every time unless it ran into the filesystem check.
    Last edited by Sinner (2011-03-25 16:29:32)

  • I can't delete bookmarks page in my bookmarks list on toolbars, maybe there is a little bugs. Thx.

    I can't delete bookmarks page in my bookmarks list on toolbars, maybe there is a little bugs. Thx.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Console CatOS MOTD small problem

    Hello,
    I have a small problem when connecting to a console port.
    We make a connection via a terminalserver to the console port of a 6500 (Tacacs+). I like to have a banner before I login on CatOs. The problem with a MOTD is that only the banner is shown after a logout.
    Any suggestions?
    Greetings.
    Jeroen

    for some reason, this doesn't work for console access. It does work for direct telnet access.
    Maybe there is some problem with remote access via a terminalserver to the console port. Do i have to change something on the line (TTY) ports of the terminalserver?
    switch> (enable) set banner telnet ?
    disable Suppress the default Cisco Systems Console banner
    enable Display the default Cisco Systems Console banner

  • Many small problems in Mavericks

    When user experience many small problem in daily work, I feel the design is failed.
    Memory management has a lot of problem, I feel my macbook is abnormal slow after I upgraded to Mavericks. Sometime, I need to wait for several sec to get what I want.
    I think this problem is extreme important for OS.
    When I want to start a probelm, click once, no response, click twice, pop-up 2 times after 5 sec.
    Then i change my way of work, clock one time, work on other task. 5 sec later, multi desktop switch the desktop to the starting program. Then, I don't know what I was doing.
    Another is sound problem, sound doesn't work sometime and need some kind of procedure to get it back.
    Please don't ask me do something to solve the problem everytime when it happen. It is OS task to work it properly.
    Whatever how many great feature you added is meaningless if user daily experience is bad.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a couple of minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply.
    6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; Pc () { o=`grep -v '^ *#' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed '/^ *$/d; s/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d; /[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]||0[^2]8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; for b in Thunderbolt USB; do o=`SP $b | sed -En '1d; /:$/{s/ *:$//;x;s/\n//p;}; /^ *V.* [0N].* /{s/ 0x.... //;s/[()]//g;s/\(.*: \)\(.*\)/ \(\2\)/;H;}; /Apple|SCSM/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); E=; for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* || continue; ls | while read f; do [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && e=" *" || e=; awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print $0 "'"$e"'"}' <<< "$f"; done | tail`; Pm "${D[$i]} diagnostics"; done; [[ "$o" =~ \*$ ]] && printf $'\n* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|last value [1-9]|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail/B,P*P,Qu*T,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; [[ "$ID" =~ ^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID ]] || printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`for e in DYLD_INSERT_LIBRARIES DYLD_LIBRARY_PATH; do launchctl getenv $e; done`; Pm "Environment"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    7. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
    exec bash
    in the window and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know your password, or if you prefer not to enter it, just press return three times at the password prompt.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If it happens, please post the test results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Small problem led to big problem

    I had a few contacts that existed on my Centro which did not exist on my desktop.  So I contacted the Palm Chat Support.  The person who helped me had me perform several things which eventually led to my phone getting stuck in a loop.  Things were not getting better so I asked to be transferred to a supervisor.  The supervisor told me the only solution was a hard reset.  I finally agreed to this.  Now when I reinstall any applications (not third-party) such as calendar or address book, my phone won't come on.  I can see the calendar or the address book but when I go to turn on the phone, it goes back into the endless loop.  A soft reset will not take it out of the loop, only a hard reset.  When I do a hard reset, I then have the ability to use the phone again but I have no data in my calendar, address book, etc.  So essentially I have either a PDA or a Phone--but I can't have both.  This started as a very small problem (a few missing contacts which I could have probably/should have probably just manually entered into the desktop).  Now I have a very big problem, simply b/c of what I was directed to do by Support.  Is there any hope?
    Post relates to: Centro (AT&T)

    There could be to issues going on here that you are having this result. One thing could be corrupted data such as your contacts or calendar, the other could be corrupted programs that are coming back from a hotsync.
    The first I would like to troubleshoot as it is the easiest. To fix this what we need to do is hard reset your device. The instructions to do that is here http://kb.palm.com/wps/portal/kb/common/article/887_en.html this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here
    Palm Desktop 4.2 and below
    My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync username
    Palm Desktop 6.2.2
    My Documents/Documents --> Palm OS Desktop --> your hotsync username
    Right click on your backup folder and rename it to "backupOld". Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
    You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.
    If you have any questions about this or if this does not work please post back.

  • Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

    Is Adobe Premiere Elements 10 compatible with Windows 8? Or maybe it will have problems?

    Riccardo Pesare
    I have Premiere Elements 10 on Windows 8.1 64 bit, and it runs well there.
    But, I must disagree with SG when he writes
    It will likely run. But it will not be able to take advantage of Windows 8's advanced architecture (including the 64-bit operating system and ability to access more than 4 gigs of RAM).
    You can prove to yourself that Premiere Elements 10 is a 64 bit application running on Windows 8 64 bit. To do this use the Process Explorer Sysinternals and add a Image Type Column readout. When you do this for Premiere Elements 10, 11, or 12 on Windows 7, 8, or 8.1 64 bit, the readout tells you that you are working with a 64 bit version.
    http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    And, as a 64 bit application, Premiere Elements 10, 11, or 12 Windows should be able to take full advantage of the 64 bit system when Windows 7, 8, or 8.1 64 bit.
    I suspect SG is thinking Mac not Windows in his comment. It is my recollection that Premiere Elements 10 Mac is still a 32 bit application on 64 bit system. And, you are using Windows, not Mac.
    We will watch for his clarification on this point or for support for what he posted as is.
    ATR

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • Very small problem RE: Variable not initializing

    //Hey, folks! Having a small problem here. Compiler keeps telling me that "result" variable may not have been initialized for this method. This is probably an issue of variable scope? It's staring me in the face and I can't see the problem. Can you see the problem?      
    public Shape randomShape()
              Random generator = new Random();
              intShapeDecider = generator.nextInt(3);
              int intCrdntX1 = generator.nextInt(500);
              int intCrdntY1 = generator.nextInt(500);
              int intCrdntX2 = generator.nextInt(500);
              int intCrdntY2 = generator.nextInt(500);
              int intWidth = Math.abs(intCrdntX1 - intCrdntX2);
              int intHeight = Math.abs(intCrdntY1 - intCrdntY2);
              Shape result;
              if (intShapeDecider == 0)
                   result = new Line2D.Double(intCrdntX1,intCrdntY1,intCrdntX2,intCrdntY2);
              else if (intShapeDecider == 1)
                   result = new Rectangle(intCrdntX1,intCrdntY1,intWidth,intHeight);
    else if (intShapeDecider == 2)
              result = new Ellipse2D.Double(intCrdntX1,intCrdntY1,intWidth,intHeight);
              return result;
         }

    Nope...don't think that's the problem. My random ints are only 3 possible nums ...0,1, or 2. I have an if for each possible condition. Therefore, nothing "else" can really happen. No?

  • Problem with installing free App (Everything is fine, bur we had a small problem getting your license)

    Hello,
    We have free App for SharePoint Online. Some our customers have problems with the installation. After install they see an issue with obtaining a license which should be free.
    "Everything is fine, bur we had a small problem getting your license. Please go back to the SharePoint store to get this app again and you won't be charget for it."
    See the screen:
    How can we resolve the issue?
    Thank you!
    Our App: "Resource Reservation"
    https://store.office.com/resource-reservation-WA104276770.aspx

    Hi Gabe,
    First, please check the suggestion above is helpful. I also suggest you removing all version of Office and re-install Office 2013.
    We can try to run the application as an administrator and check if it works.
     1. Right click the shortcut of the application or the main application.
     2. Select properties.
     3. Select compatibility tab and select "Run this program as an administrator."
    If there is anything I can do for you about this issue, don't hesitate to tell me.
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Aperture 2.1.3 Export Problems with Cropped Photos

    I ran into an odd problem after updating to 2.1.3. I was trying to upload to a Picasa album via "aperture-picasa-plugin", which I had used before without problems. The resulting export had problems with two photos I had cropped from landscape to portrait size. The resulting exports had the entire uncropped/original content "squeezed" into a photo matching the cropped size, so the exported pics were squished making everything look tall and skinny. (I found it especially odd that stuff I had cropped out was back in, but the size was cropped.)
    I assumed it was a problem with the plugin, so I exported to a file straight from Aperture and had the same problem. I had other crops that worked OK, but they appear to all be landscape to landscape with no change in aspect ratio.
    Is anyone else having this problem?

    YES!
    I have seen this show up as well. I'm also using Aperture 2.1.3. I too thought it was the fault of the picasa plugin... but when I, like you, started doing my exports directly to files I noticed that they still had the same problem.
    The horizontal 16x9 seems to be particularly vulnerable... And, yes, it almost looks as if the (pre-crop) master has been "squished" into the aspect ratio of the (post-crop) version. It is very strange, very annoying, and very intermittent. Although, I found that if I quit aperture, restart then re-export... I have better luck.
    Boy, am I relieved to find somebody else who is having this problem. For a while there I thought I was going nuts.
    -C.

  • Small problem in refreshing JFrame

    Please help me in sorting out this small problem. I called a function on a button click. In that function i tried to change the text on a button initially then i have some code to execute and then again i set other text to the same button. But iam not able to see the initial text while execution. It is as follows
    jbut.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent ae)
    connectServer(); //The function that i called
    //conncetServer function
    public void connectServer
    jbut.setText("Please Wait");
    // jbut.validate();
    try{
    Thread.sleep(10000);
    }catch(Exception e)
    jbut.setText("Disconnect");
    // jbut.validate(); This i tried
    But i am not able to see the please wait label on the screen i tried in several ways. can anyone of you tell me how to solve it..

    Hi, Problem is Gui manages its own Thread, so once u invoke a process, until it finishes GUI won't get refreshed. 2 ways to handle it.
    1. Either use SwingUtilities.invokeLater method
    Example Code.
    jbut.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent ae)
    jbut.setText("Please Wait...");// set the text
    Runnable connectServerThread = new Runnable(){
    public void run()
    connectServer();
    jbut.setText("");// return back to normal.
    SwingUtilities.invokeLater(connectServerThread);
    or
    2. Implement Runnable interface in ur class and invoke the same inside run method. It will definitely work since i checked it.
    Example code.
    Thread connectServerThread = null;
    jbut.addActionListener(new ActionListener(){
    public void actionPerformed(ActionEvent ae)
    connectServerThread = new Thread(this);
    connectServerThread.start();
    public void run()
    // set the label visible here.
    jbut.setText("Please Wait...");
    // invoke server process.
    connectServer();
    // hide the label or button here.
    jbut.setText("");
    Sreni.

  • Small problem

    I am very new to java, and having a small problem:
    When i click on a button, i want the buttons name to be displayed
    in a text field, saying "You have pressed" then the name of the button.
    but i want to do this with multiple buttons and not just one button, so i want to be able to press any button and its name to be displayed in a text field.
    your help will be appreciated

    Sorry if i did not display code, thanks to all those who replied, heres some of the code, if i have gone wrong in any where could you please help me too correct, i think you will have a general idea of what i am trying to achieve:
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.Button;
    import java.lang.Object;
    public class Calculator extends Applet implements ActionListener
    Button b1 + b2 + b3 + b4 + b5 + b6 + b7 + b8 + b9 + b10 + b11 + b12 + b13 + b14 + b15 + b16 + b17 + b18;
    setLayout(new GridLayout(5,4));
    public void init( );
    Button b1 = new Button( "1" );
    b1.addActionListener ( this );
    add(b1);
    Button b2 = new Button( "2" );
    b2.addActionListener ( this );
    add( b2 );
    Button b3 = new Button( "3" );
    b3.addActionListener ( this );
    add( b3 );
    Button b4 = new Button( "4" );
    b4.addActionListener ( this );
    add( b4 );
    Button b5 = new Button( "5" );
    b5.addActionListener ( this );
    add( b5 );
    Button b6 = new Button( "6" );
    b6.addActionListener ( this );
    add( b6 );
    Button b7 = new Button( "7" );
    b7.addActionListener ( this );
    add( b7 );
    Button b8 = new Button( "8" );
    b8.addActionListener ( this );
    add( b8 );
    Button b9 = new Button( "9" );
    b9.addActionListener ( this );
    add( b9 );
    Button b10 = new Button( "10" );
    b10.addActionListener ( this );
    add( b10 );
    Button b11 = new Button( "+" );
    b11.addActionListener ( this );
    add( b11 );
    Button b12 = new Button( "-" );
    b12.addActionListener (this );
    add( b12 );
    Button b13 = new Button( "x" );
    b13.addActionListener ( this );
    add( b13 );
    Button b14 = new Button( "/" );
    b14.addActionListener (this );
    add( b14 );
    Button b15 = new Button( "MC" );
    b15.addActionListener ( this );
    add( b15 );
    Button b16 = new Button( "MR" );
    b16.addActionListener ( this );
    add( b16 );
    Button b17 = new Button( "M+" );
    b17.addActionListener ( this );
    add( b17 );
    Button b18 = new Button( "c" );
    b18.addActionListener ( this );
    add( b18 );
    after this i get stuck, i don't know how to create a small text field that syas you have pressed (then the button name) if this coding is wrong, can you please explain what i have done wrong!
    Thanks

  • Aperture 3.2.1 Import problems.

    Aperture 3.2.1 Import problems. I can not import. Complete system hang when I try. Have to force reboot. I made a new user and everything seems to work fine under that user. I must have something conflicting in my admin user but I have had no luck finding it. I have tried rebuilding the library (all three options) but to no avail. Aperture will run fine as long as I do not try to import. This is very frustrating, any help would be greatly appreciated.
    27" imac 3.06 intel core 2 duo 12 GB Ram

    Hello Tim,
    If a problem only occurs when working from one account, then very often faulty user preferences or presets are the cause. Try to remove your user preference file, and if that should not suffice, move your presets to the desktop, as described in the Aperture 3: Trouble Shooting Basics:
    (Caution: I see, you are running Lion: Because of Lion's non-preemptive Process Management you can never be sure if an application really has quit, even if it looks in the Dock as if the Application has finished. So it is very important to log off, before you launch Aperture again, after you changed something in the libraries like described below.)
    Delete the user preferences
    You can resolve many issues by restoring Aperture back to its original settings. This will not impact your image files or your library. To reset your Aperture user preference settings to their original state, do the following:
    Quit Aperture.
    In the Finder choose Go to folder from the Go menu.
    Type~/Library/Preferences in the "Go to the folder" field. Press the Go button.
    Remove the "com.apple.Aperture.plist" file from the Preferences folder. (and log off and log in again!)
    Move the user created presets, keyword lists, and so on...
    Quit Aperture.
    In the Finder choose Go to folder from the Go menu.
    Type~/Library/Application Support/Aperture in the "Go to the folder" field. Press the Go button.
    Move the contents of this folder to your Desktop (and log off and log in again!)
    Start Aperture and see if the issue is resolved. Note: Permanently removing these files will delete presets, metadata sets, keyword sets, and so on. If moving these files to the Desktop does not resolve the issue, move them back to their original location to restore the presets, adjustment chain presets, and metadata sets. In no case will removing these files affect metadata, keywords, or adjustments already applied to images.
    If none of this should help, try to boot into safe mode (hold down shift after the start up chime), to see if you have conflicting plugins or video drivers etc. installed in your admin library.
    HTH
    Léonie

  • Just a few small questions :)

    hi guys, just had a few small questions incase any of u can shed some light on the subject
    1 - i have removed my Sound Blaster Audigy and i am now able to reach 2.5GHz easily, when the audigy was installed, i could never get over 2.4Ghz, why?
    2 - i have increased my vcore to 1.7 yet am experience lower idle temps with c'n'q enabled eg...2.4GHz @ 1.55v would idle at 29c.....2.5GHz @ 1.7vcore idles at 23c, how?
    3 - moving my ballistix ram into dimm slot 3 i am now able to go 1:1 to 228 htt at timings 2.5,2,2,10 easily...when the ram was in dimm slot 1 i couldnt go 1:1 over 200 htt, why?
    if anyone can comment or provide answers i would be most greatful
    thanks guys
    mike XxX

    NetStream.send() should usually be faster than NetGroup.post(), especially when using 1:1 NetStreams (vs Group NetStreams).
    when groups are large, there's no passive way to tell when members join or leave.  however, for small groups (less than about 15 members), they will be "fully meshed", meaning every member has a direct connection to every other member.  when that's the case, you can see the NetGroup.Neighbor.Connect/Disconnect events on a NetGroup.  to receive those, you must create a NetGroup with the same groupspec as your NetStream and listen for NetStatusEvent.NET_STATUS events.
    your function "msg" must be a method on the subscribing NetStream's "client" object to receive NetStream.send()s from the publisher.
    this is all generic ActionScript stuff.  i don't know how to use Flash CS5 but this stuff should all be the same in Flash and Flash Builder.
    -mike

Maybe you are looking for