Aperture 2 only showing previews/thumbs (no full screen/no "Viewer Only")

Not sure what's going on, bu Aperture (46k pics on a MBP 3.06) suddenly stopped showing pictures in Viewer/full Screen modes a day ago.
It shows me all the thumbs in Browser mode, but the bigger version of the picture that should be seen in the Viewer Only and Browser and Viewer stays empty the entire time. I see all the meta data in the Viewer window (ISO, version name etc,...) but no big picture. As you might expect, pictures all appear to be present, but, what's going on??

I'm having a similar issue as well! Currently the main viewer has stopped showing images. Full screen seems to be working for the time being, but now I can't use the books feature as I can't see the main viewer!

Similar Messages

  • My new ipod is showing that it is full but I have only loaded about 3gb

    My new ipod is showing that it is full but I have only loaded about 3gb

    Thanks Carolyn. I understand that my usable capacity may be less than 8gb for all those reasons.
    But here is my problem.
    I did a restore. The free capacity was then shown as 6.3gb,  then I added 75mb on mb4 files. The free capacity showing was then 5.3gb. I know that these files are approximately 75mb because I have them on my older 3G iPod touch and they are working quite fine and don't take up more than the expected room.

  • Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    Hey my iPod is not showing up on iTunes and my computer doesn't recognize it. It runs out of battery very fast and only shows the 'Connect to iTunes" screen. What do I do?

    http://support.apple.com/kb/ht1808
    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Tried to open an app and my iPad gen one froze. It only shows the apple on black screen and will show the operating wheel sometimes and while plugged in it will beep every few minutes. Will not load one show anything on screen but the small white apple.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?

    I hit the magnifier tool on my iPad and now it only shows a portion of the screen and I cannot get out of it. What do I do?

    Which magnifier tool are you referring to? If you double-tap with 3 fingers it should disable zoom. Then you can go into Setttings>Accessibility>Zoom and turn it off.

  • Why is my Week view in calendar only showing 3 days on one screen?

    When I go online to check this out, I see that everyone else's week view (in portrait mode) has the full 5 days on one screen. Mine only shows 3 days at once and I have to swipe to the next screen to see the rest of the week.
    Any help appreciated! Thanks!

    Does any body have any idea?

  • Full Screen - Main Viewer Bug in Aperture 2.0

    When I enter full screen mode the "Main Viewer" button on the toolbar that allows one to view either multiple and a single image is grayed out UNLESS I have the viewer panel displayed before entering full screen mode.
    Anyone else noticed this?
    dbk123

    Tony Finnerty wrote:
    I had been using Aperture 2.1 for some time with only the usual bugs, most commonly, the Viewer screen going black or blue or red occasionally, but a new bug has appeared that is forcing me to restart Aperture frequently. After making edits, when I move on to the next image in the Browser (the thumbnail highlighting changes, as it should) the image in the Viewer does not change. I have not found a way to get a new image in the Viewer except restarting Aperture. This is greatly slowing down my processing of big projects.
    Has anyone else seen this bug? Have you found a workaround beside restarting?
    can u guys please give us a little more info? where's the aperture library located? in your main hard drive (os x) or on another drive?
    are you sending the crash logs to apple?
    thanx,
    victor

  • White flash when previewing movies on full screen

    Sometimes, when previewing my current editable movie project on the full screen I see a brief white flash at the end. Any idea why this is, please, and can it be avoided? No problem, I guess, if it does not appear in the final iDVD version or on the burnt DVDs. Thanks, Keith.

    Hello, Keith,
    Welcome to the discussions.
    Some users reported a brief white flash in association with a transition. Is yours related to a transition? The 'cure' was to move the playhead frame by frame until you see the white flash, then 'split video at playhead' to isolate the flash. Usually it is only a frame or two in duration, and you can delete it.
    If it is with a transition, you will have to delete the transition, find the white flash frame, delete it and redo the transition.
    Post back if this is not helpful.

  • In Full Screen mode Safari only opens new tabs?

    Safari 5.1 has a preference that lets you set whether or not targeted links open into new tabs or new windows.
    In regular screen mode, this preference works as expected.
    In Full Screen mode (Lion), this preference seems to be ignored, and Safari always opens targeted links into new tabs.
    Is there a preference I'm missing to set this behavior for Full Screen mode?
    The reason I ask is that I would love to use the swipe gesture to switch between different web pages I have open, and so far Safari only seems to use gestures in Full Screen mode to switch between windows, not tabs.

    Hi there i tried... I think prey locked my computer..:(
    Infact i know it did because i just got out...after making changes in prey ...**** that is one **** of a program...
    Im across the bay... Its cold tonight. :).

  • My iPod touch is not recognized on my computer and is only showing the connect to itunes screen.

    I don't know what to do. It was working fine yesterday but now it won't recognize it anywhere and only shows the screen "connect to itunes" which it won't let me do.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    Then as necessary
    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • High quality only looks good when in full screen

    I have a "15 MacBookPro using AE CC 2014.2..
    So I typed some text within AE and dragged in a high resolution photo to make a simple video. My composition size was 1920x1080.  But the photo and text always look weird, sorta pixelated, unless they are full screen.  It's like the AE video can't handle being resized whether I'm watching it on quicktime or youtube, or even while working in AE.  However the high res photo looks great at any size when I view just as a photo, using the Preview application.
    This has happened before on other videos I've made but it really bothered me because it just ruins the photo on this one.  if I make my video 720 it comes out not as noticeable but then if you try to watch the video full screen it gets blurry in the expected pixelated fashion, so that doesn't truly solve anything....I am just confused as to why after effects is not letting me make high quality videos that look good in a smaller video window (eg: the youtube video player if you don't click full screen)
    below I attached a screen shot of what is happening.  This particular screen shot is from when I uploaded it on youtube and watched it.  But if I watch it in a small window using quicktime or even in AE, it looks the same...until you blow it up to full screen then it looks alright!
    But I want people who just happen upon the video to be drawn into the photograph and bold text on screen not see some pixelated **** 

    Your thin outlines on the fonts are going to fall apart when you have the media player scaled down. Here's why. Say those thin lines are 2 pixels wide. Say the Media player is set to 600 pixels wide instead of 1920. Divide 600 by 1920 and you get .3125 (or 31.25%) Multiply 2 pixels by .3125 and you get .625 and since there is no such thing as a fraction of a pixel the media player is going to make it's best guess where those white pixels should be and adjust the color to approximate what six tenths of a pixel would look like. The result is poor quality.
    You can improve the quality by first, not using very thin lines in your design, and second, not putting high value pixels (white, red, blue, green at 255 for example) next to black ones (0). Learning how pixels behave is as important to a motion graphics designer as learning how a brush responds to the canvas for a painter working with oils. Video is limited to whole pixel brushes so you need to learn how to paint with them.

  • Media Encoder in settings mode only shows the lower half of screen

    All of a sudden, my Adobe Media Encoder CS4 is only showing the lower half of the screen in Settings mode. This is how it encodes from the .wmv file to .avi. and is therefore corrupting the file. Does anyone know why this has happened?

    This is a known issue related to a recent security update to Windows Media: http://support.microsoft.com/kb/2803821

  • Show & Share Live Event Full Screen Disabled

    Hey,
    Has anyone else encountered this. When we are boradcasting a live event the 'Full Screen' button in Show & Share is disabled. I'm pretty sure this functionality used to be availabel but have no idea why its suddenly not.
    Any help would be appreciated.

    this button is off , can not be used by the client . In the above when i said use more tab show below
    on show and share - videos
    Browse to the video
    On the video playback screen, click the More button
    Choose Fullscreen
    http://www.birdvilleschools.net/tims/techsvcs/resources/pdf/Manual.Cisco.DMS.pdf
    please find link search fullscreen
    thank you
    please rate if this will help

  • The bookmark side bar when I click onto a topic will not come up to full screen it stays only in the side bar area.

    Is there a setting some where that needs to be adjusted. Some topics will come up to full screen, but yahoo is staying only on the side bar. To get a full screen version I have to google.
    Ken

    Hi fullertondigital,
    Thank you for your question. I understand that websites, such as the google image search, are not displaying the same way in another browser. In order to make sure that this is not caused by an add on please see if it happens in [[Troubleshoot Firefox issues using Safe Mode]]
    It could also be that you need to select the option to open the image in a new page. The new image search has the block bock appear when you select one of the images. Make sure that javascript is enabled for this animation to work correctly on the page.

  • Unable to use show desktop gesture in full screen

    Hello,
    I save a lot of temporary items to my desktop.  I also use full-screen mode for nearly everything and I find it a bit frustrating that I can't just gesture back to the desktop. If I swipe to another desktop, I don't have the same saved items.
    Anyone have suggestions for a workaround?

    Ahh figured it out.  But my hot corner for show desktop still doesn't work when in full screen.  Any other suggestions?

Maybe you are looking for

  • Unable to enable in web services using direct cable from my router

    LaserJet Pro printer is working.  Unable to enable in web tab error message: Connection error. Check Internet connection. I have internet connection and don't  use proxy server.  I have powered off both printer and router.  Thank you.

  • ReturnListener doesn't work Jdev 11g

    Hi, I was testing the implementation of dialogs using jdeveloper 11g (window A launches window B). It appears that my returnListener code method (window A) doesn't fire after I close the dialog (window B). I'm launching the dialog from a link in a co

  • Is Comfort trade LTD is working under your company?

    because i want to know if they are working under your company. I want to buy some gadgets in Comfort trade LTD and the name of the person that is working in Comfort trade is (removed per forum guidelines)

  • HT204053 how can i turn off restriction on setting

    I cant turn off my restiction and i have 10 attempt its my ninth and i dont remember the passcode, in addition to that i am not able to click on the icloud tab, message,twitter, facebook flickr vimeo and itune main account is not mine and I can't sig

  • Complex parameters in procedures

    Hi, I want to hide the implementation details of a complex table structure (at least different header-line constructs) with a stored procedure. My question is: it's possible to define complex parameters for procedures, it's possible from jdbc call (a