Aperture 2 return of the black viewer

I'm using the trial (waiting for my boxed version to arrive) on a project with about 70 images I took last night with my 40D. The problem that I used to have in an earlier version of 1.5 but was fixed in 1.5.6 or one of the later updates has returned in 2.0. This is that after doing some adjustments the viewer will turn black. If I go into full screen or if I resize the viewer the image will show up, but only for a moment, and then go back to black. I've also seen it that if I show two images side by side, only one image will show up and the other will be black. This is very frustrating because it makes editing impossible.

When this issue occurs (viewer doesn't match selection) I see the following in the console:
2008-02-19 8:32:18 PM Aperture[23842] 23842 Main Thread Exception in Aperture: * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
Backtrace:
0x00073b04 (in Aperture)
0x941bbccc: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x941bbe00: +[NSException raise:format:arguments:] (in CoreFoundation)
0x941bbe3c: +[NSException raise:format:] (in CoreFoundation)
0x92ce4bbc: -[NSCFArray objectAtIndex:] (in Foundation)
0x004e71d0 (in Aperture)
0x004e8dcc (in Aperture)
0x00341aa8 (in Aperture)
0x92ce6624: -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:] (in Foundation)
0x00043620 (in Aperture)
0x9552e744: -[NSToolbarButton sendAction:to:] (in AppKit)
0x9552ddcc: -[NSToolbarItemViewer mouseDown:] (in AppKit)
0x95409340: -[NSWindow sendEvent:] (in AppKit)
0x009ac50c (in ProKit)
0x953dc79c: -[NSApplication sendEvent:] (in AppKit)
0x00381f44 (in Aperture)
0x95349a6c: -[NSApplication run] (in AppKit)
0x00987b80 (in ProKit)
0x0000379c (in Aperture)
0x000034a0 (in Aperture)

Similar Messages

  • Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator

    Issue : In sharepoint 2013, I am experiening below error while using filter in the list view due to the number of items in this list exceeds the list view threshold, which is 10000 items. Tasks that cause excessive server load (such as those
    involving all list items) are currently prohibited.
    Error :cannot show the value of the filter.The Field may not be filterable or the number of items returned exceeds the list view threshold enforced by administrator
    Could you please suggest a way to avoid this issue apart from incrementing the list view threshold limit .
    Prashanth

    Reorganizing content, or creating more specific views. sharepoint is warning you that the content is structured in such a way that it can cause performance issues, which should be addressed in some way.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

    When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..

    Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
    See "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * https://support.mozilla.com/kb/Firefox+hangs

  • Small Bug : People detection - O key does not return to the grid view

    Windows 7
    When I hit the O key, I go into the face detection module.
    But when I hit th O key again, I do not come back into the grid view.
    To do so, I have to click on this icon to return to the grid view.

    Grid View is always G key

  • No rows returned in the BIS views

    I am new to Discoverer. I had connected to Financials Intelligence responsibility using discoverer desktop. When I tried to create a workbook in General Ledger Business Area to display the GL accounts, I get no rows returned message. I get the same message for any kind of report I try to create not only in GL business area but also in any of the seeded business areas provided by the Oracle. I can query it in toad and see the data but it is not retrieved in discoverer. what could be the problem? is there any profile options to be setup for my username or am I missing something?
    Any help is greatly appreciated
    Thanks

    Here's the metalink note for those interested.
    It's basically laying out all the steps to setup the info in Oracle Apps as alluded to by Simon and then perform a complete refresh of the BIS views in the database, bring in the new .eex file for changes, etc.
    Russ
    ===========================================================
    Applies to: Oracle Discoverer - Version: 10.1.2.48.18
    This problem can occur on any platform.
    Oracle Applications 11.5.10.2
    Oracle Applications Concurrent Manager SymptomsUnable to retrieve any data on standard General Ledger (GL) business areas and standard workbooks after migrating the EUL from Discoverer 4.1 to 10.1.2 and upgrading Oracle Applications to 11.5.10.2.
    These same workbooks and business areas worked fine before the upgrade to Discoverer 10.1.2.
    A custom business area and custom workbooks return data, but none of the standard pre-seeded "BIS" or "Financials Intelligence General Ledger (GL) business areas return data when testing in Discoverer Plus, Viewer or Desktop.
    ChangesMigrated the Discoverer EUL and Oracle Application Server environment from Discoverer 4.1.48.08 to 10.1.2.48.18. CauseIncomplete setup of Oracle E-Business Suite and Discoverer environment for Business Intelligence (BIS) and/or Financials Intelligence, including missing profile options for Oracle Applications Administrator and custom Super User responsibility.
    SolutionTo implement the solution, please execute the following steps:
    1. Login to Oracle Applications Systems Administration function as SYSADMIN user and set the profile option as described below:
    a. Profile > System
    b. Check the 'Site', 'Responsibility' and 'Profiles with No Values' checkboxes
    c. Enter "Applications Administration' in 'Responsibility' field
    d. Enter FII: GL BIS Discoverer access (if it does not display the profile option, please try wildcard option "FII%GL%BIS%" )
    e. Then in the next screen, select 'Yes' from LOV under 'Site' and 'Responsibility' column
    f. Save the settings
    g. Again repeat the same steps for custom responsibility "My_Company General Ledger Super User"
    2. Complete/confirm the following steps from Note 313418.1, Section 6, Post Installation Tasks
    a) Step 4. Regenerate your Business Views - done throughNote 313418.1, Section 6, Post Installation Tasks
    a) Step 4. Regenerate your Business Views - done through Oracle Applications Concurrent Manager as SYSADMIN user with the "Business Views Setup" responsibility.
    b) Recommend all steps under 4 and steps under 5
    c) Step 8. Refresh the Discoverer 10.1.2 End User Layer - via SYSADMIN user/responsibility - as described in note
    d) Step 9 -> Need to make sure Applications Administrator responsibility has all
    security and access to the EUL and business areas. Be sure to grant to responsibility
    rather than SYSADMIN user since the "Applications Administrator" responsibility is used to perform Discoverer Administration tasks.
    $ORACLE_HOME/bin/eulapi \
    -CONNECT <EUL schema>/<password>@<db> \
    -GRANT_PRIVILEGE \
    -ROLE "Applications Administrator" \
    -PRIVILEGE all_admin_privs
    $ORACLE_HOME/bin/eulapi \
    -CONNECT <EUL schema>/<password>@<db> \
    -GRANT_PRIVILEGE \
    -ROLE "Applications Administrator" \
    -PRIVILEGE all_user_privs
    AND
    $ORACLE_HOME/bin/eulapi \
    -CONNECT <EUL schema>/<password>@<db> \
    -GRANT_PRIVILEGE \
    - ROLE "Applications Administrator" \
    -BUSINESS_AREA_ADMIN_ACCESS % \
    -WILDCARD \
    -LOG <log file name>
    Note: The above commands need to be in one continuous line. For Unix/Linux, you may separate lines with continuation character "\"
    3. Once all steps have been completed, the standard General Ledger (GL) workbooks and newly created workbooks based on standard GL usiness areas will return data.
    Note: If you are unsure if you are encountering this specific issue, it is always beneficial to test the data via SQL using the same Oracle E-Business Suite user and responsibility.
    The following reference will guide you how to accomplish this:
    Note 279736.1 'How To Run SQL From An Apps Mode Discoverer Workbook In SQL*PLUS'
    ReferencesNote 313418.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite 11i
    Note 279736.1 - How To Run SQL From An Apps Mode Discoverer Workbook In SQL*PLUS
    Keywords'BUSINESS~AREA' 'PROFILES-SYSTEM' 'FII~~GL~BIS~DISCOVERER~ACCESS' 'DISCOVERER~4.1.48.08' 'BUSINESS~VIEWS' 'UPGRADE~TO~11.5.10.2' 'PROFILES-SYSTEM' 'UPGRADE~TO~10.1.2'
    --------------------------------------------------------------------------------

  • After using various retouch tools, Aperture often returns to the original image and I can't get my retouched image back....any ideas?

    After using various retouch tools on an image, Aperture often (but not always) spontaneously returns to the orginal image and I have to start all over again.....this seems to happen most often after I use the clone tool.  Is this a new bug or what?  It just started happening a few weeks ago. 

    I fond the answer. Inexplicably,some of the song tracks, the 'deepest' files in the structure, had become hidden. There was no clear pattern - most of my music files come from CDs, with a small number of legal downloads (mostly from iTunes). So although the artist and album folders were not hidden, if there were no unhidden song files in the album folder, apparently iTunes skipped the artist.
    Changing the attributes of all music files to unhidden took care of everything.

  • Why clicking the same tab of tab bar returns to the top view of navigation?

    Hi, I have a problem combing the UITabBarController and UINavigationController.
    I have 5 tabs and in some tab using navigation controller to switch the view layers.
    Suppose i'm on tab 0 and go to the second view layer of navigation controller.
    When i click the tab 0 again in the tab bar, it takes me back to the top view. It's really weired.
    Why do this happen? Can i override the effect?
    Thanks.

    Never mind. Apparently a duplicate of other threads. Possible fix: update the defective OSX Lion to Mountain Lion.

  • Aperture 2 black viewer problem

    Are there still other users out there having the black viewer problem??
    I'll first describe my problem as follows:
    On one image when making the basic exposure, brightness and saturation adjustments there were no problems with the viewer. Also when adjusting with highlights and shadows again no problem. But as soon as I started making adjustments in Levels using luminance the viewer went completely black. If I unchecked the box in Levels the picture would come back, but as soon as it was checked again the dreaded black viewer. The adjustments were done in the browser/viewer mode. Too my surprise when I switched to full screen mode the full viewed image with the the adjustments was perfectly fine. But when going back to the browser/viewer the viewer was black again. One more curious note is that after leaving this image for about a half an hour and coming back to it there was no black viewer to be found. Usually I would quit Aperture to get rid of the black viewer, but in this case I did not have to.
    By the way I have an ATI Radeon X800 XT graphics card in my dual 2.0 Power Mac G5 and 4.5 Gigs Ram

    I very rarely have this problem on my old Powerbook 1.33 GHz 17". Since 2.1 I haven't encountered it. However, the simplest way to overcome it is to go into Full Screen (press F), do 1 simple adjustment (such as increase brightness by .1), go back to Window View (press F again), undo the adjustment (decrease brightness by .1) - et voilà. Takes around 20 secs on my Mac.
    For me, it's annoying but no deal-breaker.
    Cheers,
    k.

  • Second Printed Page of a Report Is Corrupted As Well the Report View When Focus Is Returned To It

    I am having a problem with a report in Access 2010. The report detail has a linked subreport in it. I build a query dynamically for both the report and subreport. There is a form that builds the queries and then displays the report in Report View. Everything
    is displayed correctly. In this view I have a command button that will print the report using “DoCmd.RunCommand acCmdPrint.”The printed report’s first page is correct. The second page has #error for all the fields for next record detail and that is it. At
    this point, there are still multiple records to print. When focus is returned to the Print View, it is corrupted and usually freezes.
    If after the Report View is displayed, I right click on the header and choose to display the Print Preview, all pages are displayed correctly. If I right click again, and select print, all pages are printed correctly, and the Report View is not corrupted.
    To see if I had corrupted the database, I imported everything into an empty database. After compiling the code, the behavior did not change at all.
    Once I place the database into production, everything will be driven by command buttons on the forms and reports so the left-click drop-down menus or any ribbons will not be available.
    Does anyone know what is happening?
    Thanks, in advance.

    Hi Ray,
    I failed to reproduce this issue in my test environment (Access 2013).
    Steps:
    #1 Create a table with the attachment field, add multiple records
    #2 Create a report with the table
    #3 Click Print Preview of the report, it worked correctly
    Can you also reproduce this issue in a newly created database, if no, I will suspect that issue is related to the specific database file (data issue or database is corrupted). You could use the link below to compact and repair the database.
    Compact and repair a database
    If the methods above do not work, it would be helpful if you could share us a simple demo to reproduce this issue. Due to privacy issues, I will also suggest you submitting a professional support incident to get the 1-1 support service so that Microsoft
    engineers can work closely with you to resolve this issue.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • How do I return to the default iTunes MiniPlayer view.

    How do I return to the "default" iTunes MiniPlayer view. I'm stuck in the MiniPlayer "album art" view. I can switch out of Miniplayer but I ca't revert back to the "Player Control" view that hides the album art. Thanks in advance-

    Doesn't work. It results in a black square where the artwork used to be and a mini square next to the controls. I want the miniplayer to be mini....takes up too much real estate on the screen with the open area for the artwork. And moving the corner in reduces everything, not just the black area.

  • How do I remove the black box that appears over images in Aperture?

    I may have engaged a shortcut in Aperture but I would like to remove this function. How do I remove the black box that appears over images in Aperture? It gives you the image name, camera make and so on. It only appears when you use your mouse and let go of it over an image.

    Welcome to the forum.
    View >> Metadata Display
    It's all there.
    Also See Displaying Metadata with Your Images page 314 of the manual
    DLS

  • Rendered video looks differnt than project video   black bars in the man viewing area?

    rendered video looks differnt than project video   black bars in the man viewing area?

    When you say "rendered," do you mean hitting the Enter/Return key to produce Rendered files, for smoothest playback, or do you mean once you Export/Share/Publish the Timeline to an output file, the black bars show up?
    What version of PrE are you using?
    Also, can you give us information on the Video Clips in your Project, such as the camcorder that they came from, the CODEC used, and their Frame Size?
    Next, what Project Preset did you choose at New Project?
    If you did mean after you have output the Timeline to a file, what were the specs. that you chose for that output file?
    Black bars in the output file, or on the Timeline, indicate a mis-match somewhere in the process.
    Good luck,
    Hunt

  • Clicking on another app I get the video automatically returning to normal screen view

    I wonder why, if I put a youtube video in full screen and I click on another app WHILE THE VIDEO IS PLAYING all remain this way. On the contrary, if I first stop the video, clicking on another app I get the video automatically returning to normal screen view... This is very annoying. Is it possible to avoid this?
    Thanks

    Sorry, Mozilla doesn't support the patent-encumbered and royalty-encumbered H.264 standard, they support the OGG/Theodora and WebM free open source standards.
    Microsoft has a H.264 plugin for Firefox, but it is for Windows7 not WinXP or Win Vista. <br />
    http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin
    There may be other H.264 Firefox plugins out there for WinXP, so do a Google search. Or maybe contact support for that DVR security system and see if they know of or have a Firefox plugin.

  • Whenever i go to open a picture message in full view the black loading screen just comes up with no picture? (verizon iphone 5)

    I have a 32gig iphone 5 on verizon and whenever i go to open a picture message the black screen that says loading just comes up and i can't view the picture... any help? PLEASE!

    Try using the wall charger to charge your iPhone.  Some USB ports do not enough power to charge your phone, or at the very least, it will take a much longer time than a wall charger.
    You will find that after having it plugged into the wall for 10min, it will have enough power to indicate that the battery is now charging.
    Save your money from buying a battery for your next iPhone  :-)

  • How can I return to the Classic address book 3 pane view?

    How can I return to the Classic address book 3 pane view  & get rid of the stupid fake leather and same for iCal?

    I asked the same question at the Apple Genius Bar a week or so ago and they said there was no way to change it.  I am with you - do not like this new format at all and would love it if Apple would offer both -maybe when they do an "fix" next?  This was one change in Lion that should not have been made from Snow Leopard.  I am really sorry I upgraded at this point.

Maybe you are looking for