Aperture 2 unusable?

Since the price came down I thought I'd take advantage of Aperture's 30 day trial. It hasn't been a good experience so far and I was wondering if this is just isolated to me or what?
The first time around I pointed Aperture at my pictures folder (I download all my images to folders organized by date and event before I import into iPhoto) and told it to import. It took a while, which I was expecting but then it started "Processing thumbnails". This went on and on and on and on... It never actually stopped. While this processing was going on my newish 2.4GHz iMac Core 2 duo with 2GBs of RAM started operating very sluggishly and I was getting a SBOD with just about every opertation I tried in my other running apps (I usually have Safari, Mail and a few other apps running all the time).
I launched Activity Monitor and saw that Aperture was using up to 130% of my CPU and a bunch of virtual memory. Is this normal? So I quit Aperture and everything returned to normal.
Thinking that importing the way I did might be the problem (I also wanted to keep my iPhoto keywords which I couldn't do by importing folders) I deleted the entire library and then used the "Import iPhoto Library" option instead. This took a while, which I expected, but then it started the endless "processing thumbnails" operation again. Same results and I eventually just quit.
Is it just me that this is happening to? Any ideas what could be causing this? I gotta say that if this is how Aperture is all the time, it's junk. iPhoto is way faster and about a hundred times more responsive handling my 9000ish image library than Aperture. That seems very odd to me.

You didn't mention how many images you imported, but I am guessing it was alot
I have an older, slower machine than yours, and I imported about 6,000 images into the trial. However, I did it differently, first exporting projects from my 1.5 library and importing them one at a time into Aperture. Also, I did not actually move any files - I selected the option to leave them in place, only referencing them. It still took a while to process. Processing the thumbnails can take a long time if you import a lot of images. Not a big deal IMO - just let it go for awhile. It is worth the wait - especially if you use a referenced library.
For your uses, you may like iPhoto better. For me, Aperture is WAY better. I have far too many images to keep them all on my laptop - all my originals are referenced an reside on external drives. Yet, with Aperture - I can view, work with, and even give slideshows of ALL of my offline images even when I am away from my originals (that is why we wait for thumbnails to process). I only need to hook up to the original files for output. When I go on the road and shoot, I can download onto my laptop - then I move them offline when I get back home. The way you can manage photos in Aperture is a thing of beauty!
Scott

Similar Messages

  • Aperture unusable - Color mayhem

    I really want to love this application... and I almost do - but there's a bug prohibiying me from doing that. All images that I import look fine for a short while... but then begin to take-on an extreme neon-pinkish cast to them in the preview. The thumbnails look fine, but in preview, in the loop and even exporting to PShopCS... the images are ULTRA saturated, bright and pink.
    I have a screenshot here:
    http://www.scottfinlayson.com/Apertureissue01.jpg
    I cannot pinpoint why this is happening. I need to wait for a fix before I can even use any of my photos. I'm kinda locked-in now.

    Thanks for the replies.
    It's not proofing - I quadruple-checked that. Plus, I'd hate to see the printer that prints that bad. :o)
    Those are all RAW files from a Nikon D70. All shot in "auto" mode with the flash disabled. I imported by simply inserting the Memory card into a USB reader and imported. Again... they all were fine for a short time... then it started happening with each image 1-by-1.
    I have relaunched Aperture numerous times... rebooted twice... I dunno if it's a Graphics Card issue... or the fact that I'm running 4 displays at once...
    My primary running the first two displays is the Radeon 9800 XT AGP, and the other two are run from a PCI Radeon 9200. The application resides ONLY on my primary display which is off the AGP card. Moving the window to other displays has no effect.
    As you can see - the thumbnails look fine... and for a MOMENT, the preview looks fine while resizing the window, but then redraws hot-pink. The example shown has NO adjustments made to it.
    I have 2GB of RAM - not sure what else to tell you...
    I'm stumped.
    and no... it's not a joke. heheh...
    I truly wish it was.
    Thanks.
    Message was edited by: Scott Finlayson

  • HELP ! Aperture is showing fuzzy previews after rebuilding a new computer

    following a traumatic theft I have rebuilt my new mac and find aperture unusable as all my pictures in preview when looking at an event are dreadful and fuzzy, okay when you open but all the small pictures are very fuzzy. Making aperture unworkable
    Can anyone help ?

    Hi IWC, sorry to hear about your theft - good news that you're up and running again and still have your images!
    Have you tried re-generating a preview to see if it fixes the fuzziness? If you haven't, try right clicking on an image, hold down alt/option and the "Update Preview" option near the bottom of the menu will change to "Generate Preview". If that fixes it, try re-generating the previews for your full library either by selecting them all or from the "Photos" menu.
    Apologies if you've already tried that and it didn't work. If you haven't, hope it helps!
    Cheers,
    Colin

  • Aperture crashes when doing enhancements crashed at thread 35 which i think is a display driver problem any ideas folks

    Aperture keeps crashing every time I try and do some auto enhancements crash log comes up with crashed at thread 35 or 36 which seems to point to a display driver problem imac 2.16 intel core 2 duo 3gb ram os x 10.6.7.
    This is making aperture unusable I might go back to lightroom never had these problems with it.
    Graham

    Hi yes I'm running 3.1.2 I have tried 32 bit mode and it does just the same.
    Graham

  • Continued lack of RAW support

    I am really perplexed with Apple RAW support. I thought finally with the release of Aperture 3 they would finally get it right. I haven't been able to use Aperture before because they haven't support most of the cameras I've owned. Finally today they added the G1 - 16 months after the camera launched and on the eve of a new model release. I sort of understood that they needed to incorporate lens corrections BUT.....
    There is still no support of the GF1 - released in September 2009. Gheeez the files are the same as the G1. Lightroom has had support since day 1.
    I am really afraid to make Aperture my primary DAM and image editor until I can get comfortable that Apple is actually serious about supporting cameras as they are released. Not sure how to get Apple to understand that their audience for this product is an audience that tends to buy new camera gear. Waiting months or years for camera support makes Aperture unusable as a product.
    How do we get Apple to listen?

    teb, me too. I have owned the GF1 since September and have been waiting and waiting.
    Supporting only the G1 and GH1 makes no sense - it is the same raw format. I'm wondering if there is a way to get Aperture to ignore it. See this post on how a script can make EP1+EP2 files be read as an E30:
    http://www.apertureexpert.com/tips/2010/2/1/a-script-to-open-olympus-e-p1-e-p2-r aw-orf-files-in-aperture.html
    The only way to get Apple to listen is to go to the Aperture menu, then click Provide Aperture Feedback. Here's the direct link: http://www.apple.com/feedback/aperture.html
    This is the only channel that works and I think a lot of people either don't know it is there, or cannot be bothered.

  • Images breaking up

    There is an apparent bug in Aperture 3 when using a certain graphics cards. The images in thumbnail appear fine, but when viewing in full frame many of them break-up into colorful patterns, often showing parts of other images within the currently viewed image. This renders Aperture unusable for editing images.
    When I called Apple Support regarding this issue I was told it was a known bug. I've now lost over a week of productivity since reporting thr problem. Anybody else having this issue?

    Am having the same problems plus program crashes and system crashes. Just upgraded from AP 2.5 and what a mess this 3.0.2 is. I occasionally got screen artifact in the main viewer screen, but nothing like the problems with this new version.
    I did leave feedback on the APERTURE > Leave Feedback link.
    Hope they find a solution soon.

  • Major slowdown causing Aperture to become unusable on MacPro

    I posted this message back in September 08, but the thread has been archived so I cannot reply to it. But the issue is on-going.
    I'm at my wits end with Aperture on my desktop Mac (Mac Pro, 2 x 2.66 Ghz Duel Core, 9GB Ram, Radeon X1900 512Mb video card).
    My library is currently running at over 115,000 managed images divided into projects each around 100-200 images, these are organised into folders for each month of the year, residing in folders for each year. Images pre-2006 are JPEG and the rest, around 31,000, are RAW files.
    When I go into a project and try to edit a caption, select an images, make an adjustment, or just 'Select All' I get the spinning beachball of death, sometimes for up to 5 minuets. Even just clicking on an image to select it in browser mode results in a SBBoD for 20-30 seconds. Adjustments are painful and frustrating. This happens with no other apps running and without Aperture doing any background tasks.
    My library of managed images used to resides on a dedicated 1Tb drive installed in an internal bay of the Mac Pro, vaulted to a third drive. The was rather full so recently U have RAID-ed two drives together to provide more storage and now I have 476GB free, about 1/3 of the drives.
    There is quite obviously something wrong, as once in a while I can edit a project fairly swiftly, making adjustments, using the sliders fluidly and use full-screen mode etc. However, most of the time it is as slow as described.
    It has got to the point when I am editing on my Mac Book Pro (which only contains a few projects, around 500 RAW files) and then transferring the finished project to my Mac Pro for archiving purposes. In fact I have recently exported a project of 1800 RAW files to my laptop to edit, and when finished re-imported to the Mac Pro library as just selecting just a few images to export was taking me half an hour.
    Does anyone have a suggestion as to what might be casing the colossal slowdowns and any tips for fixing it? I have already rebuilt the library and moved it to a drive with more free storage.
    I'd like to hear from users who have over 100k managed RAW images in their libraries and hear what performance is like on certain systems. I'm convinced that Aperture is capable of running fast and smoothly with this size of archive and that I have a more than powerful set-up.

    There is quite obviously something wrong
    We agree that something is wrong. The problem is that with heaviest-graphics work almost anything or any combination of things can compromise performance as described. So...
    • What version of Aperture?
    • What are the files (e.g. mostly 20 MB Nikon NEFs or whatever)?
    • What do you observe long term watching Activity Monitor?
    • What exactly are your hard drive setups including how full, what types of arrays, what lives on what drives, what connectivity, etc.?
    • What routine maintenance have you done on the box since it was new? Not just what you did last week, what was done 2007/2008? Have you ever "migrated" an install?
    • What kinds of apps are on the box? Any free ones? Plug-ins? Any bargain buys that potentially could have been pirate versions carrying malware? Any other users with access to the box?
    • Does this happen after a reboot with only Aperture open and after all hard drives are for sure up and fully running? A common problem is one or more hard drives spinning down, perhaps intermittently. That would exactly describe your symptoms. Note also that some small apps and most plug-ins get installed to auto-launch, so verify that none are running.
    IMO running a Managed-Masters-Library with 100k image files probably requires a perfect RAID array setup for the Library running perfectly along with additional arrays to properly back it all up. Personally I use a RAID0 Library arrayed on two internal drives but use a Referenced-Masters-Library with Masters on external drives to keep Library size reasonable. (Note this para is just an observation, we have a lot more to discuss in order to troubleshoot)
    Buy Disk Warrior (be sure to get the exact version appropriate for your OS) and run it if you have not yet done so.
    Try creating and running as a new user.
    Trash Preferences and restart.
    Repair Permissions immediately before and immediately after any installation that asks for the admin password.
    Although repairing Permissions is not a fix for poor performance, many of us on the Photoshop forums do find that religiously repairing Permissions immediately before and immediately after every installation of any kind helps keep a graphics box running more smoothly. In any event repairing Permissions does no harm, only good.
    If we do not come to a solution I will lend you a new unused HD2600 XT graphics card to try in the event your 1900 card is flaky (which is not uncommon). I bought it but it requires OS 10.5.x and I still use 10.4.11.
    -Allen Wicks

  • Aperture 2 or 3: delete unused masters?

    I am upgrading my 2 library to import into version 3. Before doing that I want to clean up my old library by deleting unused masters from the library.In other words: I only want to retain those photos that I have placed into Albums. I can't figure out any way to do this other than export all the individual albums and then import the files into V. 3. I certainly don't want to take the time to do all that. It seems that leaving Aperture bloated with photos I don't want to use is very inefficient, never mind being a space hog.
    Anyone got any solutions, in either version?
    Thanks

    Ian Wood's tool could help but a quick and dirty way in A2 would be to keyword photos that are in albums. A PIA but...
    RB
    Ps. Ap3 has a search by album criteria that you could use.

  • Aperture 3 Unusably Slow on MacBook Pro?

    Hi everyone, I have a Mid-2009 2.8 GHz MacBook Pro and a photo library of 61,000 photos. More of them are JPEG than RAW, but there is a lot of RAW in there. I have the masters stored on an external FW800 drive with the library itself on my internal HDD.
    Aperture 3 is unusably slow. It takes probably close to a minute to load, freezes for five or ten seconds at a time when I ask it to do things, cannot display thumbnails as I scroll, etc., etc. It freezes a lot.
    When it is doing almost anything, the whole system grinds to a halt. Finder is very slow. Mail has a hard time switching folders. Safari freezes between pages.
    Yet: generally, Aperture's CPU usage is below 100% (e.g. just one core, not both), often at 60% or less even when working really hard (only occasionally tapping the second core). Disk i/o never seems to go over 6MB/s, yet the system almost feels like it would if the disk were too busy and couldn't work with the other apps.
    Any idea what might be a miss? I've tried all kinds of different ideas and can't get the system to work well. It feels vastly (and I do mean vastly!) slower than iPhoto on my old PowerMac G5 2.7 GHz. I used Aperture 2 briefly, and I think it may have been a bit faster, but it too was really, really slow.
    Using the 9600M doesn't seem to make much difference over the 9400M, incidentally.
    Thoughts? I appreciate any help you can provide!
    Thanks,
    Tim

    Turn on "Quick Preview" mode in Aperture when browsing on your laptop and you should not have any performance problems when rapidly browsing the library.
    To understand what it is and how it works, see this:
    http://documentation.apple.com/en/aperture/usermanual/index.html#chapter=5%26sec tion=7%26tasks=true
    The performance difference between iPhoto and Aperture has to do with a significant difference w.r.t. how they store adjusted images.
    Neither app will destroy the original image you import from the camera. But that's about where the similarities end.
    When you make an adjustment to an image in iPhoto, iPhoto makes a copy of the original. Also, iPhoto doesn't work in RAW -- only JPEG. It can read RAW but the moment you make an adjustment, it creates a copy which is a JPEG. Thus when you scan the library, you're really scanning copies of JPEGs. JPEGs are small and open quickly. Thus it seems to be quick & snappy. Unfortunately, it's not RAW and you lose the control you would have had doing a complete RAW workflow.
    Aperture, doesn't actually make a copy at all. It just stores a list of instructions for all the adjustments you've made. When it opens an image you shot in RAW, it opens the RAW file and applies all the adjustments as the image opens (which takes significantly more processing power than merely opening a JPEG). This means it takes longer, but you have a true RAW workflow with all the power and control that goes along with it.
    Aperture does create a couple of JPEG copies of your RAW images -- but if you're working in RAW it doesn't use them for any purpose other than rapid browsing of the library. Just turn on 'Quick Preview' mode and you'll have all the speed you enjoy in iPhoto. If you try to make an adjustment while Quick Preview mode is enabled, you'll notice the adjustments tab tells you that adjustments are disabled while in that mode. Fortunately you can toggle preview mode on & off very quickly.

  • Some images created in Tiger unusable under Leopard - can crash Aperture

    I have tried both updates and clean installs of Leopard on my MBP and external firewire disks. In both cases I find that a large number of images in my libraries (built under Tiger), give Aperture fits. For example, whilst I can see thumbnails, I can't export versions - messages come up to say the images can't be decoded. Similarly, if I try to edit or view some images full screen, I get a message saying "unsupported format". At times, trying to work with these images crashes Aperture.
    In a couple of cases, I still have the offending images on cards and I was then able to import them anew into Aperture (running under Leopard) - these work OK.
    Boinx Fotomagico under Leopard stopped running and quit without warning trying to run previously created slideshows that incorporate some of the above-mentioned images.
    I conclude that there is a problem with Leopard's treatment of images rather than Aperture specifically. However, I have no clue how to address the problem. At present Leopard is just unusable for me.

    Hello
    a - my way of life is the Winston Churchil's one : "absolutely no sport"
    b - as during more than 30 years I ruled a pottery workshop using a process which is unique worldwide, I know what confidentiality means.
    c - Whe I exchange with Apple, they don't ask me to sign a Non Disclosure Agreement.
    They perfectly know that when I beta tested I NEVER violate the signed ones.
    I'm aware of anomalies when using Numbers under Leopard.
    Maybe you met one which I ignored.
    Knowing such of these problems, I decided to use Tiger as my main operating system.
    Here, as I play safety, Leopard is always in test, not in real use.
    Yvan KOENIG (from FRANCE samedi 19 janvier 2008 17:20:41)

  • Aperture 3.4.5 unusable

    I'm running 10.8.4 on my MacBook Air and Aperture was running fine until I installed the update to 3.4.5. Since that very moment the software has been unusable despite repairing the database and rebuilding it have first held down the Alt + Cmd buttons when starting the software. As soon as I try to do anything in my library, Aperture shows the spinning ball and any other open programmes (such as Mail & Safari) freeze and from the Force Quit show as Not Responding.
    Now I understand most of the developers will be in San Francisco this week but it strikes me that quite a few people look to be having issues with 3.4.5 even though they have made no changes to their library in terms of adding or deleting images. Surely there is a simple fix to the bug I am experiencing.

    Have you also tried to use the "Repair Permissions" in addition to "Repair Database"?
    See Jerry Dalton1's post: Aperture 3.4.5 Slow Performance after update and resolution
    If that does not help, reinstall Aperture (depending on your version, as described here: Aperture 3.4: May quit unexpectedly on launch after updating)
    If Aperture downloaded with transmission errors, the reinstall might fix this.
    Regards
    Léonie

  • Ever since upgrading to Yosemite, Aperture is slow and basically unusable. Every click results in spinning wheel.

    Ever since the upgrade to Yosemite, my Aperture application will not let me perform any tasks. I have let it run over night and many times to do database repairs etc... and nothing seems to work. Any recommendations on what I can do to help get the application back to a better state?

    and many times to do database repairs etc...
    Have you also rebuild the Aperture Library?
    Have you opened the "Activity" window to check, which tasks Aperture is running? (Window > Show Activity)
    Sometimes Aperture may be trying to process a corrupted image or video over and over again. Then it will help to identify the problematic item and to delete it from the library.
    If you cannot find anything suspicious in the Activity window, try to find out, if your aperture library has a problem by testing with a new, empty Aperture library. Just add a few photos and check, if Aperture is more responsive.
    If Aperture does not even work with a new library, check in a different user account, for example the Guest user.

  • Aperture simply unusable on new iMac with Lion

    I bought a new iMac having been a happy user for many years (iMac 21.5" i3 3.06GHz with 4G RAM), and thought I'd upgrade to Aperture as I want to get a little more creative with my photos.
    I was astounded when I imported my iPhoto library of about 60GB that it was still "processing"after 24 hours, but I let it be and it seemed ok
    I've just done my first import of about 300 photos from a holiday (they're on an 16GB card so it can't be that big...) and all seemed fine until I quit Aperture and reopened it - now it's back to "processing" and running at snail's pace.  It's been at it for about an hour so far.
    This renders this totally useless software - but if I click on "report a problem" on the email receipt, I'm simply taken to the support pages - and if I try to actually contact Apple they tell me my hardware is out of its free support period so there's nothing I can do!
    This is absolutely outrageous - I paid £55 for software that simply doesn't work on an almost new machine - and yet apparently it's tough because my machine is more than 3 months old!  Can this be right?
    And am I missing something, or is Aperture supposed to take several hours to open up?  It's unuseable as it is.
    Secondly, where are my photos that I've uploaded into Aperture?  I've deleted them off the card, so I want to at least import them into iPhoto so I can give up using this heap of junk and ask for my money back.
    Thanks

    I see what you are saying andyfromembsay, but most software companies have you buy support after a certain period of time. I just had an issue with Parallels that showed up after thirty days since I installed the program, to get support now I would have to buy it even though I never submitted a support issue in the first thirty days.With Apple if you buy the extended warranty you get support for three years.  I didn't buy the Parallels extra support, it was quite expensive, I went to their forums and found the answer I needed.
    Anyways, there is another thread in these discussions about Aperture being slow, it seemed to clear up after an update to 10.7.1. Also someone mentioned using Disk Warrior to clean up a fragmented directories. That is the one piece of software I wouldn't be without. It has saved me so many times!  I ran Disk Warrior before I even upgraded to Lion, fixed a bunch of fragmentation. The upgrade has been smooth. I have not had any glitches with Aperture. I also do not have Time Machine backing up constantly. I have it back up once every 12 hours using Time Machine scheduler, that has also been reported as a problem.
    I do think you have an issue, it shouldn't be updating like that, mine hasn't been doing any updating that I can see. I still have the Trial, so maybe that is different, but I used software update to update it to the 3.1. I will probably buy it, but I don't usually spend more than a few bucks on software that I haven't tried out, I have wasted too much money on programs that are not really good and the developer abandons after a year!  I always download a trial before getting software if I have a choice. The Aperture trial was not in the App store, I had to Google to find it, but glad I did, I really wanted to see if it was worth spending more for it than just upgrading to the latest iPhoto (now that is a program that annoys me!) I think it is.

  • PCI slot in Thinkpad Dock II unusable

    Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
    Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
    08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    For comparison, here's what my lspci looks like undocked:
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.417 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e80)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (973.82 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: Transparent bridge - 0000:00:04.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    PCI: setting IRQ 7 as level-triggered
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 15, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 19, cardbus bridge: 0000:00:02.1
    IO window: 0x00003400-0x000034ff
    IO window: 0x00003800-0x000038ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PCI: Bridge: 0000:00:04.0
    IO window: 4000-4fff
    MEM window: disabled.
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    Switched to high resolution mode on CPU 0
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI interrupt for device 0000:08:01.0 disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    Clocksource tsc unstable (delta = 142862014 ns)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (49 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0038, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PREFETCH window: 0x40400000-0x407fffff
    MEM window: 0x40800000-0x40bfffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    Disabling IRQ #11
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
    MadWifi: ath_attach: Switching rfkill capability off.
    NET: Registered protocol family 23
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    ppdev: user-space parallel port driver
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PREFETCH window: 0x40c00000-0x40ffffff
    MEM window: 0x41000000-0x413fffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c014007b>] set_process_cpu_timer+0x2b/0xd0
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    [<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
    Disabling IRQ #11
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    CMD648: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    Probing IDE interface ide1...
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    For comparison here is my dockless dmesg:
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.425 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0a20)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1396.15 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 2, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:02.1
    IO window: 0x00003000-0x000030ff
    IO window: 0x00003400-0x000034ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Switched to high resolution mode on CPU 0
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142842086 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (50 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0498, PCI irq 5
    Socket status: 30000006
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    NET: Registered protocol family 23
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
    I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.

    I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.407 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    pci 0000:00:04.0: supports D1
    pci 0000:00:04.0: supports D2
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
    PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
    PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
    PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
    PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
    pci 0000:08:01.0: supports D1
    pci 0000:08:01.0: supports D2
    PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
    pci 0000:08:02.0: supports D1
    pci 0000:08:02.0: supports D2
    pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.0: PME# disabled
    PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
    pci 0000:08:02.1: supports D1
    pci 0000:08:02.1: supports D2
    pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.1: PME# disabled
    pci 0000:00:04.0: transparent bridge
    PCI: bridge 0000:00:04.0 io port: [0, fff]
    PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:04.0: BAR 7: can't allocate resource
    pci 0000:00:04.0: BAR 8: can't allocate resource
    pci 0000:00:04.0: BAR 9: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: IO window: 0x003800-0x0038ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
    pci 0000:08:02.0: IO window: 0x004000-0x0040ff
    pci 0000:08:02.0: IO window: 0x004400-0x0044ff
    pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
    pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
    pci 0000:08:02.1: IO window: 0x004800-0x0048ff
    pci 0000:08:02.1: IO window: 0x004c00-0x004cff
    pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
    pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:04.0: IO window: 0x4000-0x4fff
    pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
    pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 0f index 0 io port: [1400, 14ff]
    bus: 0f index 1 io port: [1c00, 1cff]
    bus: 0f index 2 mmio: [30000000, 33ffffff]
    bus: 0f index 3 mmio: [34000000, 37ffffff]
    bus: 13 index 0 io port: [3400, 34ff]
    bus: 13 index 1 io port: [3800, 38ff]
    bus: 13 index 2 mmio: [38000000, 3bffffff]
    bus: 13 index 3 mmio: [3c000000, 3fffffff]
    bus: 08 index 0 io port: [4000, 4fff]
    bus: 08 index 1 mmio: [40000000, 47ffffff]
    bus: 08 index 2 mmio: [48000000, 4fffffff]
    bus: 08 index 3 io port: [0, ffff]
    bus: 08 index 4 mmio: [0, ffffffff]
    bus: 09 index 0 io port: [4000, 40ff]
    bus: 09 index 1 io port: [4400, 44ff]
    bus: 09 index 2 mmio: [48000000, 4bffffff]
    bus: 09 index 3 mmio: [40000000, 43ffffff]
    bus: 0d index 0 io port: [4800, 48ff]
    bus: 0d index 1 io port: [4c00, 4cff]
    bus: 0d index 2 mmio: [4c000000, 4fffffff]
    bus: 0d index 3 mmio: [44000000, 47ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pata_acpi 0000:08:01.0: PCI INT A disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142865538 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (24 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    Disabling IRQ #9
    pccard: CardBus card inserted into slot 0
    PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Error: Driver 'pcspkr' is already registered, aborting...
    NET: Registered protocol family 23
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ppdev: user-space parallel port driver
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
    CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    cmd64x 0000:08:01.0: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c031007b>] cache_add_dev+0x215/0x44a
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    Disabling IRQ #9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    lp0: using parport0 (interrupt-driven).
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ACPI: EC: missing confirmations, switch off interrupt mode.
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    Note the "can't allocate resource areas"... And here is the new dockless dmesg:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.409 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
    pci 0000:00:02.1: IO window: 0x003000-0x0030ff
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1400, 14ff]
    bus: 02 index 1 io port: [1c00, 1cff]
    bus: 02 index 2 mmio: [30000000, 33ffffff]
    bus: 02 index 3 mmio: [34000000, 37ffffff]
    bus: 06 index 0 io port: [3000, 30ff]
    bus: 06 index 1 io port: [3400, 34ff]
    bus: 06 index 2 mmio: [38000000, 3bffffff]
    bus: 06 index 3 mmio: [3c000000, 3fffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142862504 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (34 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pccard: CardBus card inserted into slot 0
    PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Error: Driver 'pcspkr' is already registered, aborting...
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    input: Video Bus as /class/input/input7
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    NET: Registered protocol family 23
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    lp0: using parport0 (interrupt-driven).
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    ppdev: user-space parallel port driver
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
    Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it.

  • IPhoto transfer to Aperture..now I have 3 libraries?

    So here's what I have done. after several months with Aperture and iPhoto, i decided to just use Aperture. Up until now, I was using an iPhoto referenced library with Aperture (i think that's right) and not using iphoto unless the photo was not in aperture. So, i guess i was using 2 separate libraries. Aperture for newer, and iPhoto for older, but when i started using Aperture i think i set it up so i didn't disturb iPhoto.
    Please forgive my ignorance, here is what it says for libraries in aperture:
    iPhoto library Version 9.3.2
    Aperture library.aplibrary(current default)
    Aperture library-iphoto.aplibrary
    That said, not all the photos transferred from the iphoto library to the Aperture library. I had to update the iphoto library before i could merge them. i have narrowed down the approximate dates of the photos that didn't transfer from iphoto to aperture. i want to have 1 library...just aperture and delete the iphoto library completely. Oh, and now I have only 1.21G left on my HD!!! I have 21,000 photos in Ap and about 19,000 in iphoto, so my machine is dying. don't want any disasters, so i need to do this now.
    i am on an iMac mid-2007. 4GB memory with a tiny HD 250G. I can't upgrade the HD at this time. i do have a brand new MBP with a large HD and 8G HD. i also want to have ALL my photos on that, in Aperture only, so ??? I'm running Mountain Lion on all computers.
    I really appreicate any input and hope i've made a modicum of sense. Everything is backed up on an EHD.
    Thanks in advance!
    donna

    I use Aperture on a MacBook with 2GB of RAM. It is the Core Duo 2Ghz, not the newer Core 2 Duo. Performance varies from great to painfully slow. All in all, I'd call it acceptable until a better machine and/or software fixes come along.
    The fast parts are on the library side, with searching, key-wording, sorting, etc.. as fast as I could ever wish.
    The slow parts are in adjustments and exporting. They are both related because exporting is slow because it applies all the adjustments to generate the result file. Adjustments can get glacially slow, especially some combinations. Once you have applied crop and/or straightening to an image, all other adjustments get slower. Spot and patch varies from fast to unusable. Highlight and shadow adjustments are slow and make the others really slow, etc... A big improvement would come from having a proper GPU, which the MacBook lacks. The implication is also that CoreImage programming for the CPU is really not optimal, because other products do the same tasks much quicker with the same CPU. Maybe a deep revision of CoreImage could bring a big improvement.
    Until then, it is hard to advise anyone to go and buy a MacBook to run Aperture. I find it acceptable for my needs, but that's it. For a portable, a MacBook Pro seems to be much better. On the desktop the iMac 24" with 3GB of RAM and the nVidia 7600GT seems to be tailor-made to run Aperture.

Maybe you are looking for

  • Since upgrading to FF 8 something frustrating has been going on with my tabs.

    If I already have a tab ''(or more)'' open and I click on a link in an email ''(using my email client to view my email)''...instead of opening the link in a new tab the link is opened using the open tab and canceling out whatever had been open in tha

  • Unable to open files with unicode filenames

    Hi, I am attempting to load a file that contains unicode characters in the filename with the Flash Player 9 ActiveX control but I am unable to do so. If however I switch my system's code page via the regional and language options to a code page that

  • Adobe flash player. I got as far as reading the contract, policy notice th

    I finally downloaded the Adobe flash player and go to the read the policy, read it, and don't see where to mark that I read it . The install button is grayed out. I need help on how to get this installedd I have Mac !0.6.8. Thanks, Pam

  • Loading data into another schema table

    Hi, i have a table 'abc' in schema 'sch_123' i also havea a table 'xyz' in another schema 'sch_789' i have abt 25,000 rows of dat in table abc of schema 'sch_123' i want load the data in table 'abc to another table 'xyz' which is in the schema 'sch_7

  • Cannot set some "engine preferences" in BPM 5.7 studio

    Several days ago, I found that some engine preferences were "grayed" and cannot be checked, like Deployment->"Remove previously published and deployed processes in next publish" and "Generate Default Views " . Also most of them under the engine->gene