Aperture 3.0.1 toolbar
After I print an image all buttons in the toolbar become inactive. To re-activate the toolbar I must click on another project or minimize Aperture. Any ideas?
sounds like a genuine bug. What happens if you just give it some time to return from printing? Perhaps you're also having printer issues?
Maybe you could also try clicking on something that causes less disruption, like a menu item? Or try a keystroke like the down arrow.
Similar Messages
-
I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?
Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics. -
How do I open muliple raw files in ACR hosted by Photoshop?
Hi,
This one is annoying the hell out of me. I used to highlight multiple raw files in Bridge and just press Enter (being the equivalent to File -> Open) and the images would all open together in one ACR interface with the filmstrip down the side. Now, however, one file opens and if I hit cancel or done, the second image THEN opens, and so on and so forth. If instead of pressing Enter I choose File -> Open in Camera Raw or I right-click and Open in Camera Raw, it works fine and does what I want (or if I click the aperture symbol on the toolbar at the top). It's a minor annoyance I suppose but and annoyance nonetheless.
The worst part is that it worked fine until I uninstalled CS5.1. I had CS5.1 no problem, then installed CS6/CC alongside it. I got eveything working how I wanted in CS6/CC and then uninstalled CS5.1. I may be wrong on the exact timing of the problem and therefore it may be a Red Herring, but it seems fairly close together when this started.
Notes: There is no expansion bar on the left of ACR that is just hiding the filmstrip. Which is consistant with the fact that the second image does in fact open after I close the first. So they are clearly being treated as seperate open actions. Also, in Bridge, Edit -> Preferences -> General: 'Double-click Edits Camera Raw Settings in Bridge', ticked or unticked makes no difference. Also in Photoshop, Edit - Preferences -> File Handling: 'Prefer Adobe Camera Raw for Supported Raw Files', ticked or unticked makes no difference.
I have also tried changing the above mentioned options, closing PS and Bridge so the preferences file is updates, changing them back to how I want and closing so the preferences file is updated and I get the same results.
I hope I've made it clear what the issue is, and any help would be much appreciated for what may seem a minor thing.
CheersI don't have CC just CS6. In Photoshop if I use open and select multiple raw file and click open Raw file open one at a time in ACR. One after the other. If I use Adobe Bridge and select mutiple raw files and open with the default application ACR open with all raw file or double click. It also opens like that from CS6 mini brdge. In any case the bridge must be running.
-
Aperture3, Lion, and the cloud: Where did my Mobile Me Galleries go?
How do I share my photo galleries from Mobile Me? Not photostream but specific galleries. I am using Aperture 3, OS 10.7.2 and Mobile Me. When I migrated to iCloud my galleries seem to have disappeared but Aperture is still uploading galleries to somewhere.
And to publish a new specific gallery to Mobile Me drag a Mobile Me icon to the toolbar of your main Aperture window (View -> Customize Toolbar).
Select the images you want to share in the Browser window and press the Mobile Me icon in the toolbar. Then you will see a panel where you define an album to be published as Mobile Me Gallery.
HTH
Léonie -
Understanding Cookies, Plugins, & Removal
(1) I have an annoying error message that pops up every time I open Safari (and strangely, also when I open Aperture) that says
"Community Toolbar
We’re sorry, but the Safari browser version you are currently using does not support the community toolbar."
I have had it happening for about a year. I have no idea what the Community Toolbar is which it is talking about. I do not recall ever installing any extensions or plugins into Safari. My list of extensions is empty as it should be.
(2) I decided to have a look through my cookies list and delete those that look suspicious or unnecessary. I did this via Safari Preferences > Privacy > Show Details.
In the list of cookies there are numerous ones which indicate they are plugins and have numerical names with a square bracket like 238] When I try to remove them they automatically regenerate.
As I said I have never knowingly installed a plugin into Safari so why are there plugins there? Are these a normal part of Safari? If not can they be removed and do they have anything to do with the Community Toolbar error message I get? How do I track down the Community toolbar and eliminate it?
I am using the latest version of Safari in Snow Leopard. Snow Leopard is up to date.Some good news, I have discovered how to remove the Community Toolbar from reading other forum posts on this issue. I was surprised to discover it appears to be a common problem caused by 3rd party web sites.
To assist any others with this same problem this is what you do:
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Now back to my 2nd question. What about the cookies that indicate they are plugins and what do I do about them? -
Can´t access customize toolbar window in Aperture 3
Dear Apple community,
When I call "customize toolbar" in Aperture 3.2.4, the window with additional icon options is missing, inlcuding the "done" button (see attached screenshot), but I´m able to move existing icons arround and the rectangular spaces appear. To end the customization mode, Aperture has to be restarted. In other applications there seems to be no problem.
My Sytem is a MacBook Pro, 2.4 Ghz (Core 2 Duo) with 2 GB RAM with MacOS 10.6.8
Aperture was installed from the AppStore and runs in 64 bit mode.
So far, I tried to remove "com.apple.Aperture.plist", with no effect.
I did not reinstall Aperture yet, because the current version in the AppStore seems to require 10.7. Would I still be able to install the latest version running on 10.6.8 from the AppStore?
The Problem has been reported before (https://discussions.apple.com/message/17081479#17081479), but I couldn´t find the solution.
Below, I copied the console report.
Thank you very much for your help,
Felix
7/11/12 12:57:21 PM
Aperture[7459]
HIToolbox: ignoring exception 'Modal session requires modal window' that raised inside Carbon event dispatch
0 CoreFoundation 0x00007fff88460784 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff87f9df03 objc_exception_throw + 45
2 CoreFoundation 0x00007fff884605a7 +[NSException raise:format:arguments:] + 103
3 Foundation 0x00007fff8a04197a -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 198
4 AppKit 0x00007fff84227c59 -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] + 572
5 ProKit 0x000000010138939e -[NSProApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] + 138
6 Aperture 0x00000001004b4844 0x0 + 4299900996
7 AppKit 0x00007fff845896a2 -[NSToolbar _runCustomizationPanel] + 320
8 AppKit 0x00007fff84143eda -[NSApplication sendAction:to:from:] + 95
9 ProKit 0x00000001013897ed -[NSProApplication sendAction:to:from:] + 100
10 Aperture 0x00000001004b4b17 0x0 + 4299901719
11 AppKit 0x00007fff8416846a -[NSMenuItem _corePerformAction] + 365
12 AppKit 0x00007fff841681d4 -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] + 121
13 AppKit 0x00007fff843edcf4 -[NSMenu _internalPerformActionForItemAtIndex:] + 35
14 AppKit 0x00007fff8429f9e9 -[NSCarbonMenuImpl _carbonCommandProcessEvent:handlerCallRef:] + 136
15 AppKit 0x00007fff8414a99c NSSLMMenuEventHandler + 321
16 HIToolbox 0x00007fff82c857f7 _ZL23DispatchEventToHandlersP14EventTargetRecP14OpaqueEventRefP14HandlerCallRec + 1002
17 HIToolbox 0x00007fff82c84d46 _ZL30SendEventToEventTargetInternalP14OpaqueEventRefP20OpaqueEventTargetRefP14H andlerCallRec + 395
18 HIToolbox 0x00007fff82ca2a81 SendEventToEventTarget + 45
19 HIToolbox 0x00007fff82cd1c35 _ZL18SendHICommandEventjPK9HICommandjjhPKvP20OpaqueEventTargetRefS5_PP14OpaqueE ventRef + 387
20 HIToolbox 0x00007fff82cfea0a SendMenuCommandWithContextAndModifiers + 56
21 HIToolbox 0x00007fff82cfe9c2 SendMenuItemSelectedEvent + 101
22 HIToolbox 0x00007fff82cfe8d2 _ZL19FinishMenuSelectionP13SelectionDataP10MenuResultS2_ + 150
23 HIToolbox 0x00007fff82cdfc27 _ZL14MenuSelectCoreP8MenuData5PointdjPP13OpaqueMenuRefPt + 467
24 HIToolbox 0x00007fff82cdf37c _HandleMenuSelection2 + 453
25 AppKit 0x00007fff8401b851 _NSHandleCarbonMenuEvent + 236
26 AppKit 0x00007fff83fef362 _DPSNextEvent + 1908
27 AppKit 0x00007fff83fee801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
28 Aperture 0x00000001004b597b 0x0 + 4299905403
29 AppKit 0x00007fff83fb468f -[NSApplication run] + 395
30 ProKit 0x000000010138c04b NSProApplicationMain + 267
31 Aperture 0x000000010001001e 0x0 + 4295032862
32 Aperture 0x000000010000f964 0x0 + 4295031140the problem exists even on a "clean" user account.
That really suggest a system wide trouble - hardware, MacOS X system, or Aperture.app.
Currently I´m wondering, if there are still remains of Aperture 2 around, which could interfere with Aperture 3.
Did Aperture 3 ever work previously correctly? Then I do not think, that there are older receipts from Aperture 2 interfering.
Does the console output (see first post) mean anything to you?
The Console output shows only calls to methods from the standard frameworks that are part of MacOS X, no frameworks that are installed inside the Aperture application. But Aperture might be calling wrong, outdated frameworks or GUI-elements (nib-files) inside the Aperture package may be missing. SO I cannot really tell, if the problem is with the system or with Aperture.
I assume you have done all ritual fixes like rebooting, Resetting your Mac's PRAM and NVRAM,
You might try to reinstall Snow Leopard and see, if that fixes it. If not, contact Apple and ask for an Aperture installer.
Regards
Léonie -
Installed 2.1.4 on an iMac with 3GB Ram using 10.6.8 OSX.
Experiencing two problems for now.
1. Attempts to customize toolbar has no response. The boxes appear but no screen with the tools to import.
2. I did the standard install over AP 1.5 and all library photos for 1.5 appear in 2.1.4 but
when opening a project/folder picture it will open and the "Loading" message appears but the wheel is not moving?
I'm using 2.1 over 3.0 because I have it and not ready to spend more until I get this working. I plan to go to LION OSX
once Aperture functons correctly.
Any help will be greatly appreciated.
GeorgeUpdated to snow leopard and had the same problem that when the thumbnails where placed on the bottom I could only scroll left or right when no picture was marked... so I placed the thumbnails to the left side and scrolling worked normally even with a a marked picture...I also had bad color sync problems and switching screens would cause my windows to become almost black and unreadable..... I reinstalled my Leopard clone drive shortly there after... oh well... it took a while before leopard was ready for professional use.... I didn't really expect Snow leopard to be different... I will check back in at 10.6.4 or so LOL
-
How can i reset the colors of Aperture toolbars and event icons? They have all gone grey.
Have you just upgraded to Aperture 3.3 or later? The grey design is a feature, ot a bug
See the Release Notes: http://support.apple.com/kb/TS2518 (Aperture 3.3)
Newly designed monochrome source list and toolbar icons.
The only way to change it, would be to manually replace the icons by colored ones in the Aperture application itself. You would have to patch the application bundle and to exchange some of the tiff files in the "Resources" folder.
And each time there is an update you would have to start over.
There are quite a few discussions on this, see:
Re: After updating to Aperture 3.3 all my icons appears in Black and white. This includes the inspect button, photo stream button, the Facebook / flicker share button. Could you please help here ?
or:
Latest Aperture update - all icons on toolbar now grey
Re: arghhh!
Re: Why O Why did Apple removed the sidebar colors?
Regards
Léonie
P.S. Some hand colored icons to replace the grey ones are here:
Re: After updating to Aperture 3.3 all my icons appears in Black and white. This includes the inspect button, photo stream button, the Facebook / flicker share button. Could you please help here ? -
I have just purchased Aperture 3.4.5 and notice that the Inspector pane and Toolbar are in greytones. No Colour !! any ideas?
It has been this way since Aperture 3.3. It is not bug, but a feature. New designed icons to fit in with the grey design of Lion and Mt. Lion.
And sorry, there is no built-in option to restore the colorful look of previous Aperture version.
See this thread: https://discussions.apple.com/message/18648069?ac_cid=tw123456#18648069
Regards
Léonie -
Toolbar in Aperture gone..!
Very weird problem since I have installed Leopard.
The upper toolbar of Aperture where it says, file, view, help, etc. is no longer visible. Does anyone has an idea how this can be repaired?
No problem of the kind with my iMac, or Probook.
Thanks.
Joslook in the threads about missing menu bars.
-
I am unable to see the ratings display and all photos are formatted improperly in the regular display format of the program. Only in fullscreen format am I able to view all tools otherwise they are shoved out of view from my display so I am unable to navigate the program at all.
For UI problems like these the first step is to move out the Aperture preference file.
See Aperture 3 Troubleshooting the bit about the preference file is about 1/2 way down the page.
If that doesn't solve it post back.
regards -
Metadata Toolbar Buttons in Aperture 3.0
Somehow I have turned on a metadata buttons toolbar at the bottom of my screen that's using valuable real estate. I have spent the last 30 minutes reading and trying to get rid of it but I'm stumped. Can anyone help me get rid of this beast?
Nevermind folks, I finally found it. "D"
-
Latest Aperture update - all icons on toolbar now grey
The latest update to Aperture has left me with all icons in grey, there is no colour. Everything still works but it all looks very dull!
Peter,
I am always on the lookout for Murphy, and so:
I put a copy of the resources folder on my desktop (can always go back to the default 3.3 icons)
I then copied over the individual icons I wanted from my earlier version to the 3.3 resources folder - for me , this was the smart album, the new smart album TIFFs, the Album and new album TIFFs etc
Just open Aperture and there they are.
Could probably just copy the lot (and revert to the saved copy of 3.3 resources folder if needed), but I didn't.
Could probably save the set in a separate "colour icons" folder in case this needs to be done again with upgrades to Aperture.
Such a simple work around Apple will surely make this an option in a new release.
Cheers,
M. -
How do I find the history of sent photos in aperture?
Where do I find the list of where I have sent a photo directly from Aperture. I am wondering if I sent a photo to a certain email and I would like to look it up to see if I already sent it.
Great question and one of Aperture's strengths:
New ('+' icon in toolbar) > Smart Album > Add Rule (upper right of smart album dialog) > select Photo Usage > place check-mark in box at left of rule > set to: 'has been' and 'Emailed' in the drop-down menus.
That should do it. -
How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.
There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.
Maybe you are looking for
-
Application Builder and Closing
Hi Already, another problem has arisen. I have developed a simple VI with no big thing inside. I am using an event structure for handling button presses. To quit my application, I have one button, labeled Quit (who would've guessed) which quits the a
-
hey guys, i've used a select query to get details from KNA1, KNVV, ADRC, KNVP, pa0002. tables by joining. but i'm getting only about 170 records. there are more than 3000 records in the database. for each tables. here is my select query SELECT KNA1KU
-
We have a HP Officejet 4500 wireless printer which was first installed in 2011 without any problems. We also utilize a HP LaserJet P1006 printer (not wireless) with our network. I cannot print from my laptop to either printer, but hubby's desktop has
-
LSO - Course type is displayinf free of charge when there is a cost fee
HI, I've created a price for one course type and would like to see it displayed in the LSo Portal if the employee checks the course info. But when I open the course information, the Fee details are bringing free of charges. How can I make it work? To
-
Encrption / Decrption for Bank Interface using File adapter 7.1
Hi Friends, My scenario is IDOC to file. I have a requirement to integrate SAP Payment run idoc PEXR2002 with one of the bank file format. I am able to generate the file as per the bank requirement. But the client wants to do encryption and decrptio