Aperture 3.0 not importing RAW files from Canon T1i

I have recently upgraded to Aperture 3.0. I shoot with Canon T1i in RAW+JPG file size. When importing files from Canon T1i for the first time to Aperture 3.0, I found that all files imported as jpg not RAW. How do I get the RAW files? Help!!!
Anjali

It does support Canon T1i RAW mode. In the "Import Settings", there's a section for "RAW+JPEG Pairs". If you don't see this, click the "Import Settings" pulldown menu and select it.
In the "RAW+JPEG Pairs" section, there's a pulldown menu to allow you to select "Both (RAW as Master)"
It'll use the JPEG as the "Preview" image, but it will use the RAW as the master for all adjustments you want to perform.
Prior to the import, you should see both the JPEG and RAW (.CR2) files. AFTER the import, you should only see the RAW in your project (it has the JPEG... but it wont normally display it because it knows the RAW is the master.) After the import, select any photo in your project, then click the "metadata" tab on the left. At the top it should give you the camera, lens, exposure info, etc. and you should see the "RAW" icon.

Similar Messages

Can't import RAW files from Canon Powershot S50.

iPhoto6 will not import RAW files from my Canon Powershot S50. It says the files are "unreadable". Image capture will import to the desktop, but neither iPhoto nor Photoshop Elements can open the file. I checked and the S50 is supposed to be compatible with OSX and RAW files.
SFR
Macbook Pro Mac OS X (10.4.7)

I agree but I was responding to someone with an S50. That's hardly an "advanced amateur" camera. iPhoto has some rather neat catalog features but the editing is purely for the snapshooter. Heck, I suspect that redeye removal is the most popular feature and, as far as I'm concerned, if you have redeye to begin with, you're a snapshooter.
I'm an extremely advanced amateur with my film setup but, because of cost, I'm still a snapshooter with my digital camera. My film setup is two Nikon N80s with a top-of-the-line Nikon flash head that I use only with a Stroboframe bracket. The bracket and the necessary extension cord cost me nearly $200! My lenses are pure Nikon, including a single focal length f/1.8, 85 mm. portrait lens.
I consider 10 MP to be the bare minimum for "advanced amateur" shooting and both Canon and Nikon have recently introduced 10MP SLRs in the $1000 range. However, I'm waiting for the next advance - an SLR without the reflex mechanism - interchangeable lenses and an FP shutter but no mirror! Let's face it, the reflex mechanism adds cost but a digital screen gives the same view and even better (you can see the color balance) and screens are now available that can be viewed in bright sunlight.
I'm also hoping for one thing that will probably never happen - physically larger CCDs so that I can get the same focus control (small depth of field) that I can get with my film camera.

Lightroom 4. dose not handle RAW files from canon 5D MK 111.

I have purchased lightroom 4. It dose not handle RAW files from canon 5D MK 111.
I have downloaded and ran the suggested file from Adobe, but still no luck.
Anyone have the answer?

The initial release of Lightroom 4 doesn't handle the 5d mk 3 files because of when the camera was released. You can either wait for the 4.1 release, or you can download the 4.1 Release Candidate 2 at http://labs.adobe.com/technologies/lightroom4-1/.
Technically you can also download Adobe's DNG converter, but that just adds another program to the situation.

DNG converter not converting RAW files from Canon 70D.

DNG converter not converting RAW files from Canon 70D (it does not see them). I tried DNG converter version 8.2 and 8.4. No success. I use iMac. What is wrong?

hopefully, that's a typo on adobe's website because they list the canon 70d as using a .cs2 file extension, http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
i don't see any other camera that uses a .cs2 extension and i don't see other people having problems, so that probably is a typo.
in any case, cr 8.2 or better is able to convert your camera's raw files. why you are having a problem i can't say, but double check that you are navigating to the correct folder by adding a file that will show up in your dng converter.

Lightroom 4 does not import RAW files from D610

I've just purchased Nikon D610, and my Lightroom 4 is not importing RAW files anymore. What is the problem?

The current version of LR 5 is 5.7 so I’d guess LR 6 will be out at some point later this year, in the next few months. If money’s no object then upgrade to LR 5, now and to LR 6 in a few months. If you’ll be very upset to learn you’ve paid $80 to upgrade and then need to pay another upgrade fee for LR 6 then maybe wait and do the DNG thing for a few months, and then upgrade from LR4 to LR6.
The other concern is whether your OS is new enough. I’d suggest you download the latest LR 5.7.1 update and run that in trial mode for a few weeks—you have 30 days, to make sure your computer can handle it, before spending the money and finding out you need a new computer, first.
The other thing to consider is the $10/month Photography Plan subscription which gets you the most up-to-date versions of Lightroom and Photoshop as long as you keep paying. Since you have your old LR4 serial number, you can decide to cancel the subscription after a year and use the LR4 serial number to buy the LR 6 upgrade, then. This assumes that LR 6 will be available as a serial-number-licensed product, still.
The latest LR 5.7.1 update is here:
http://www.adobe.com/downloads/updates
The lens profiles added to each version are listed here:
http://helpx.adobe.com/x-productkb/multi/lens-profile-support-lightroom-4.html

New Computer - Can't import raw files from Canon 1D mk 4

I just bought a new Toshiba Qosmio laptop and have reinstalled PS CS5 and LR 3.2 64 bit. LR says there are no other updates to install. Trying to import raw files from CF reader but LR is not showing me the raw files on the import screen. I have installed Camera Raw 6.2 plug in. It's been a long night but I can't see why files aren't importing properly. What am I missing? All suggestions greatly appreciated.
Thanks
Mark

Mark,
The ACR plugin is not needed for importing files with Lightroom. LR has it's own "ACR" built in. The ACR plugin is used when opening Raw files from Photoshop.
Try copying the files from your card-reader to your hard drive using explorer/finder, and try importing from there. There have been quite a few reports where the card reader (and its connection) have lead to trouble while importing into LR.
Beat Gossweiler
Switzerland

I have photoshop elements 10 with all updates but it will not import raw files from my sony rx100

Can anyone help. I have adobe elements 10 with all updates but it will not import .arw (raw) files from my sony rx100

Sony RX2 is supported in ACR7.2 and higher whereas PSE10 can go as high as ACR6.3
Thus you wont be able to open your raw files directly into ACR. You might want to download DNG convertor(version 7.2 or higher) and use it to convert your raw files to a different raw format (.dng) which is supported by all ACR versions.
Windows download click here DNG Converter 7.2
Mac download click here DNG Converter 7.2
You Tube click here for DNG Converter tutorial
Curtsey of 99jon

Iv just installed cs6 and it will not open raw files from canon 5d111?

iv just installed cs6 it will not open cr2 files from my canon 5d111 ?

update your adobe camera raw files.
windows: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Windows
mac: http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Any ideas why Photoshop CC 2014 is now not opening RAW files from Canon 70D?

I used to be able to open RAW files from my Canon 70D camera, and since I did an update, it will no longer open RAW files from my Canon 70D camera.
I've uninstalled, and re-installed Photoshop CC 2014, and still no luck.
Any help would be appreciated!

I should check to see if I have the latest version.
You don’t, because 8.0.x is not the latest.
You need to update ACR.
Camera Raw plug-in installer

Elements 7.. raw plugin 5.5 .. Dose not support raw files from Canon 60D

Elements 7 dose not support raw files Canon 60D. I have up dated the raw plugin to 5.5 still dose not support my cameras raw files

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The 60D is included from ACR 6.2 on. I think that means you may need Elements 9 or later.

PSE11: How to import Raw files from Canon Powershot SX60 HS Bridge Camera? [was: Dear Sir,]

I have just purchased a Canon Powershot SX60 HS Bridge Camera. I have Photoshop Elements 11 and I cannot import Raw files. How do I download the latest version of Camera Raw into Elements 11?
T.W. Gasby

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
With Elements 11 you cannot.
The SX60 HS was first supported in Camera Raw 8.7 which is only compatible with Elements 13 and later.
Options:
Pay to upgrade to Elements 13
Free option: download the Adobe DNG converter, convert all SX60 HS Raw files to DNG format then edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

Cataloging Archive Drives And Can Not Import RAW files from Kodak DCS Pro

Tried with bridge and photoshop and they will not open DCR file
How can I convert this file to a DNG...do I need to go old school and download a older version of camera RAW or go to an old MAC te a os that supports Kodak's DCS host software

There is a separate DNG converter tool from Adobe, whichnyouncan download as freeware.
No idea though if this does support your special raw format.
This is often used to help people with LR3 but newer cameras, which are supported in LR4.x only.
Going for an older camera raw version will not solve anything, since older formats are always readable by newer versions (provided the file is uncorrupted).
Cornelia

Problems importing RAW files from Canon 5D

My Lightroom 4.0 cannot read my RAW (CR.) files from my Canon 5D Mk1 . My MACbook can 'see ' them through Lightroom when I connect the camera but when I click import I get a message saying it cannot read the files (889)?

Can you please quote the error message exactly? Error messages that contain "cannot read" often mean that the permissions on the destination folder (where the RAW files are supposed to go to on your hard drive) are not set to WRITE permission. Please check.
Also, are you sure its a "Canon 5D Mk1"? Is that a typo? This list of supported cameras doesn't list that camera
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html Is it a a Canon EOS 5D with no Mark anything on the end?

CANNOT import RAW files from CANON 40D to Lightroom 1.2

My color setup in 40D is sRGB
my system is windows XP
but when I want to import files from my CF card
it will show the message: some import operation were not performed.
the files use an unsupported color mode.
pls tell me how to solve this problem~

Sorry for the above post. My daughter hit the keyboard. I am having the same trouble and I have tried shooting in Standard Raw and with the attached Jpg. I get a message that states it is a unsupported color format. Any ideas? It sounds like everyone else has got this to work but it simply will not work for me. I am running Vista if that makes a difference.

Preview in OSX 10.7.5 does not recognize RAW files from Canon EOS 6D

What must I do so that I can see downloaded RAW photos from my new Canon 6D in "Preview" in my iMac's OSX 10.7.5? Preview does show photos from my earlier Canons fine. My older version of Aperture can open the 6D's files, as can, of course, Photoshop.

I could be mistaken, but I believe that Preview does not support RAW - only Aperture, a newer iPhoto version, and third party software will handle it. Does your Canon come with the Digital Photo Professional software from Canon? That should be compatible with RAW as well.
Mountain Lion appears to have more compatibilities:
http://support.apple.com/kb/HT5371

Aperture 3.0 not importing RAW files from Canon T1i

Similar Messages

Maybe you are looking for