Aperture 3.01 / Activity Processing 281 of 4024 Items freeze

Hello,
after upgrading to 3.01 the Aperture activity monitor always showing / Activity Processing 281 of 4024 Items but is is somehow frozen. I tied so far all library items I could manually select and process. Like this way I did not find the trouble maker.
Is there any way how to see where the precess is stuck?
Thanks,
Matthias

Ma-Le wrote:
after upgrading to 3.01 the Aperture activity monitor always showing / Activity Processing 281 of >4024 Items but is is somehow frozen.
Have ya considered upgrading to 3.03? I seem to recall 3.0.3 solved that problem for me.
Jerry
I tied so far all library items I could manually select and process. Like this way I did not find the trouble maker.
Is there any way how to see where the precess is stuck?
Thanks,
Matthias

Similar Messages

  • Aperture has started random "processing"

    I have been idle in the Aperture community for a while, but I have not found the answer to this problem in my searches.
    My Aperture (Still 3.2.2) is processing a large number (2000) of images.  It's just "Processing".  There is no explanation of what it is doing or why it started.  My wife started Aperture the other day and said "The computer's running slow".  She does not know of any stray keystroke or menu option she chose.
    Now, I have this "Processing" paused.  While it was paused, I plugged an iPhone into my Mac.  Instead of presenting me with an "Import from iPhone" window, Aperture started a secong "processing" activity!  Now I have two "Processing" activities, without any indication of what or why!
    I tried plugging in a different iPhone.  It's fishy -- I did not get the"Import" window.  However, Aperture did not start a third "Processing" activity.
    The selection of photos that are being processed have no rhyme or reason to me.  They are from different cameras, different years, different projects!  Some are managed, some are referenced.
    Does anyone have a clue what might have started this and what exactly Aperture is processing?
    nathan

    Hi Kirby,
    Have you tried letting it process overnight?
    I don't doubt that the Processing activity will finish if I let it -- I'm just afraid of what it is doing!  If I didn't ask Aperture to do any heavyweight processing on my photos with Places, is it doing something that I don't want it to?  Is it messing something up?
    And is there a reason you've not updated to 3.2.3?
    I usually watch the scuttlebutt about problems with upgrades for a little while before I perform the upgrade.  This time, my personal life got put on hold while I work crazy hours at work.  Once I get a chance to think about things and make sure my library is sufficiently backed up, I will upgrade.  I know Apple makes things easy, but I always take a good chunk of time to make sure my system is in a good state to perform an upgrade that is as important as Aperture.
    nathan
    (And yes, I sign "nathan" instead of "Nathan" just because I've been doing that for decades, since I was in college. )

  • My iphone 5 is making me complete the whole activation process over again whenever I turn it off and sometimes when I turn the screen off. Also my icloud will not connect. Help!

    Basically yesterday my iphone started requiring me to go through the activation process (connecting to wifi, logging in to itunes,etc.) I have tried r

    I have tried restarting it but each time it requires me to log in again.

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • Tried upgrading to new OS 5, and now itunes won't continue the activation process, what do I do?

    I recently tried upgrading my iphone 4 to the new OS 5, and now itunes won't continue the activation process. It keeps say that an unexpected error has occured, Error 310. I am very frustrated and now have no phone to call apple, and there website is no help. What do I do?

    Hi seth fromhollywood,
    I found this in internet, I hope it helps:
    Error
    -310
    Name
    SmFHBlockRdErr
    OS
    Mac OS
    Error Title
    smFHBlockRdErr
    Message
    Error occurred during _sGetFHeader.
    Risk Level
    9
    for resolution look here ...

  • How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

    How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

    Hi csreddy, 
    If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Apple - Find Locations
    https://locate.apple.com
    Contact Apple for support and service - Apple Support
    http://support.apple.com/en-us/HT201232
    Regards,
    - Judy

  • Short dump while activating process chain

    Please let me know the cause of short dump while activating process chain.. when trying to activate local process chains in metachain it is causing dump

    Can you share more details about error.
    Have you done any changes to local chain? or is this is new chain?
    Try to remove meta chain from schedule, later activate your local chain and meta chain.
    schedule your meta chain.

  • Memory could not be allocated for the activation process. Please close all applications and try agai

    I have just had a Windows XP failure and took the opportunity to replace with Windows 7.  After I reinstalled PhotoShop CS(1) the message "Memory could not be allocated for the activation process. Please close all applications and try again"  is shown and forces PhotoShop to close.  I have 4Gb of Ram installed and a total of about 10Gb of Page File space on three partitions of a 500Gb HDD.  The system is not heavily loaded!  However, I cannot access Photoshop to check scratch disk allocation.  How to fix???
    Back to top

    Yes, there are many forums, and it can be confusing. Your question has the best chance of being answered if it is in the proper place. I think it is there now.
    Pattie
    http://forums.adobe.com/message/5092533#5092533  is your post address
    Download and installation forum:
    http://forums.adobe.com/community/download_install_setup

  • Memory could not be allocated for the activation process. Please close all applications and tr again

    Hello,
    Just purchased a new laptop:
    Intel Core 2 quad
    4gb memory
    1000 HDD
    Photoshop CS 8.0 disc dead/scratched/unreadable.  So I copied my Adobe folder from my Program Files Folder on my PC and pasted on laptop.  When I try and run PS I get the error message "Memory could not be allocated for the activation process. Please close all applications and try again". Which I do then Photoshop closes.
    Can anyone help (in layman terms please)?

    Not really. You are essentially FUBARd. Without a proper install, there is usually no way on to get the licensing stuff working. You might be able to get there by installing any other CS product, so PS could latch on to the licensing system that would be already in place, but otherwise it's a lost cause. Simply copying over the executables is normally not enough. I will admit though, that I skipped CS, so there may be some tool somewhere that I don't know about can do this post facto...
    Mylenium

  • Error in 'eMail Response - Process Message' --- Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(

    Hi,
    When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
    Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
    I increased the log level to 5 and got the below message in log file
    ObjMgrBusServiceLog    InvokeMethod    4    0000000251b51f04:0    2013-06-10 01:30:12    Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
    ObjMgrBusServiceLog    Error    1    0000000251b51f04:0    2013-06-10 01:30:12    (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
    I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
    Can any body help me out in this regard.
    Thanks in advance..
    Jagadeesh

    Hi Naresh,
    yes, I am using the delete polling strategy. Here is the .jca file:
    <adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
    <endpoint-activation portType="Pozadavky_ptt" operation="receive">
    <activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
    <property name="DescriptorName" value="Pozadavky.Pozadavky"/>
    <property name="QueryName" value="PozadavkySelect"/>
    <property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
    <property name="PollingStrategy" value="DeletePollingStrategy"/>
    <property name="PollingInterval" value="120"/>
    <property name="MaxRaiseSize" value="1"/>
    <property name="MaxTransactionSize" value="10"/>
    <property name="NumberOfThreads" value="1"/>
    <property name="ReturnSingleResultSet" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>

  • Not able to complete activation process.

    After updating my iPad2 to ios8.0.2., I lost my ability to connect to my cellular network, with an error message reading "Not able to complete activation process.
    Does anyone know of a fix for this problem?

    Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

  • ITunes fails to launch but is an active process in the task manager

    When I try to open iTunes 7.0 it won't launch. But if I open the task manager is shows up as an active process. If I click "end process" it won't close. iTunes will only open up if my ipod is connected to the computer. ????
      Windows XP  

    See:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls

  • TS3988 This product can not proceed with the activation process, service errors go I want you entered will appear this error I am a Korean. Failed to resolve service center in South Korea  Please e-mail response  iPad2 32GB Cellular Version

    This product can not proceed with the activation process, service errors go I want you entered will appear this error
    I am a Korean.
    Failed to resolve service center in South Korea
    Please e-mail response
    iPad2 32GB Cellular Version
    <Email Edited by Host>

    I'm same. Any Update or News?
    Message was edited by: koreasaram

  • How to monitor the Activation process of a request in DSO

    Hi all,
    I have loaded the data ( 7 million) records in DSO as a new request. I have clicked on the activation button.
    Can any one tell me where can we check the status of this activation process of this request?
    When clicked on monitor or logs button it shows me all as status green, but not able to figure out where to check the status of activation process.(the data is still not activated )
    any help would be great.
    Thanks in advance.
    Regds,
    Maddy

    Hi,
    There are a couple of places where you can see the activation progress.
    1) To start with SM37 job log > (give  BI_PROCESS_ODSACTIVAT  or BI_ODSA*)                        
    and it should give you the details about the activation job. If its active make sure that the job log is getting updated at frequent intervals.
    2) For very huge number of records SM37 job log may not get update frequently. In that case you have a workaround.
    Go to contents > Active Data table > No. of entries > This will keep on increasing at frequent intervals.
    3) SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. See if its accessing/updating some tables or is not doing anything at all.
    4) Go to Activate button in Target > Request tab. Inside you can see a job log button. It will also show some log regarding the last activation.
    Thanks,
    JituK

  • Error during activation process

    hi all,
    i have"error occured during activation process" DSO...but the request is available for reporting.what do i do?
    thanks

    Hello Dear
    In the setting of infopackage you have following options
    a. No update, no reporting (default)
    If errors occur, the system terminates the update of the entire data package. The request is not released for reporting. However, the system continues to check the records.
    b.Update valid records, no reporting (request red)
    This option allows you to update valid data. This data is only released for reporting after the administrator checks the incorrect records that have not been updated and manually releases the request (using a QM action, that is, by setting the Overall status on the Status tab page in the monitor).
    c.Update valid records, reporting possible
    Valid records can be reported immediately. Automatic follow-up actions, such as adjusting the aggregates, are also carried out.
    Check if you have selected the third option
    Thanks
    Tripple k

Maybe you are looking for