Aperture 3.01 Printing to Canon iPF 6100 Broken

No matter what print size i specifiy in the print dialog, the iPF plugin always gets 8.5"x11" paper size.
Unusable. This worked before the update.
Please please please.
I need to be able to print contact sheets!
If anyone has a workaround?
Otherwise i'm leaving for Capture One Pro and so is my studio 10+ licenses.

Hello Ernie and thank you for your inputs.
Using the Canon Printer Driver there is not as such a "Color Management OFF" function (that I am aware of). However to quote Canon Help;
+"*For Mac OS X v.10.5.x*+
+When you want to print by using the color space (Adobe RGB or sRGB) of the image data effectively or _by specifying a printing ICC profile from your application software, select ColorSync_+."
It goes on to say;
+" Select color correction - Select the item below that matches your purpose.+
ColorSync
+You can print by using the color space (Adobe RGB or sRGB) of the image data effectively.+
+Depending on the application software, when a printing ICC profile is specified from that application software, Vendor Matching cannot be selected because ColorSync is selected automatically.+"
As far as I understand This is the same as "Color Management OFF", as it is managed by the application. By the way these settings are the same when printing from both applications.
Regarding Proofing Preview, I've set the profile to match the Printer Profile for the paper I use and then tried printing with and without the preview on.
Cheers
Henrik

Similar Messages

Printing on Canon ipf 6400 using 17 inch roll canvas

I am new at Lightroom and new at the printer. I am using 17 inch wide rolled canvas, printing an image 11 x 11 inches on a Canon ipf 6400, rather than wasting canvas at side of the 11 inch print, and using only 11 inches of the roll, it prints on the one edge of the canvas leaving the other 6 inches unused, but then it rolls down to a full length of 17 inches, thus wasting another 6 inches, full width of 17 inches. I need someone to tell me how to set Lightroom features so that printer only rolls out 11 inches of paper needed for the print.

I'm having same issues trying to print to custom sizes in Preview.
Possible work-around (not a solution, but might allow you to print and meet a deadline): I found I could set my Custom paper size as the Default in the Print & Scan Preference Pane.
Now, my print job still had issues, but it may work for your Aperture job. Of course, the PIA is that you have to remember to go back into Preferences and reset Default Paper Size...
Hope Apple is aware of - and working on - printing issues...

Printing to Canon iPF series

Historically I've always printed from Photoshop via the 16-bit Canon plugin. This works great. I just thought I'd give native Ap3 printing a try for once. After I go through the (awkward, buggy) layout feature in Aperture, it appears to hand off to the OS X print dialog.
There, it appears to have correctly picked up my color profile setting (custom) and my paper type and size (letter cut-sheet). After setting some additional options (media type, resolution), when I hit Print, the Canon monitor application starts and the combination Aperture+OSX Print Dialog locks up. It just sits there with no options in the dropdown. The printer actually lights up as if it's ready to print, but nothing goes over the wire.
I can print okay from other applications using the built-in print driver, so I think it is something with Aperture.
Is anyone else having this problem?

Hello Jeff,
The problem you are having with the Canon PS and UFR2 driver is caused by the Paper Size > US Letter not being listed as a supported paper size. Instead, these two drivers have Letter, not US Letter. Therefore, when you do have the Page Setup > Format set to Any Printer and the Paper Size set to US Letter, the finishing options are not available.
You will notice an interesting phenomena via the Page Setup pane. Open an application like TextEdit, go to Page Setup and have the Format set to Any Printer and the Paper Size set to US Letter. Then change the Format menu to the Canon driver and watch the Paper Size automatically change to Letter.
The solution to this is to delete the CanonPS and UFR2 driver and use the new Canon 'CUPS' PS v2.11 driver. This driver has US Letter as a supported paper size, so you can leave 'Format for' at 'Any Printer'. And the driver supports both the 5075 and C5185, so you models are covered. Note that you will still have to use the Fiery driver for the other C5185.
Re the mailbox, the format setting won't affect this function. Your comment about PCL not supporting it is interesting. The PCL driver on Windoze definitely works with mailbox so you must have some other gremlins if that is not available.
Regards,
PaHu

9.4.3 - Can't print my PDFs to a Canon IPF 8000s

Hi Everyone!
I would appreciate any advice regarding the above.
For the last two years, I have been able to create work in In-Design CS4 then export it via Acrobat Pro into a PDF and print successfully to a Canon IPF 8000s.
I have updated the various drivers, adobe software over this time and all has been well in my camp.
Just two weeks ago, the printhead on the Canon was changed....and since my printed posters are missing lettering, etc.
I've been chatting with the Canon guys and we've eliminated the printer as a problem.
The problem lies with Acrobat Pro 9.4.3
Is anyone having a similar problem with 9.4.3?
Cheers VW/MK

vivrainbow wrote:
Thanks for your time but I have no idea how to 'roll back to 10.6.6'. Discussions around this do not actually explain how to do it, well not in a way that makes me confident.
I have time machine but have never used it.
The odd thing is that some PDFs - eg those generated by my website - print perfectly. The ones that don't have been created in InDesign CS5.
Thanks
Vivienne
go to apple's website > support > dowloads: download X.6.6 Combo updater.
Download and save to convient location.
Locate install disk that came with your computer.
Insert into DVD Slot and Let mount.
next restart Computer holding down C Key.
Keep holding C key down Until Screen somes up for Installer.
release C and and choose desired language.
install. (is similar to the old archive and install).
Make sure you install everything you want even use custom install if necessary.
Restart. Do not open anything other than the X.6.6 Combo updater
install it.
now go to Aplle menu and system update It will find any updates needed since combo installer.
clik to see more info.
check anything in list except X.6.7 update.
Install all those items.
Now you be good to go.

Lightroom 5.7 with printer canon ipf 6450

Hi, i've a problem with lightroom 5.7; i'm unable to print with the print module on my canon ipf 6450 (can't manage the colors by lightroom. i'm using Mac Os X 10.9.5. No issues at all with CS6 to print!

Hi Jim
Here a screen shot:
Mit freundlichen Grüssen
Pascal Gai
Chasseralstrasse 15
3212 Kleingurmels
www.pascalgai.com
Am 30.12.2014 um 15:03 schrieb JimHess <[email protected]>:
Lightroom 5.7 with printer canon ipf 6450
created by JimHess in Photoshop Lightroom - View the full discussion
What is preventing you from managing the colors using Lightroom?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7052908#7052908 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7052908#7052908
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have recently installed Aperture 3.1 and my Canon MG 6150 is unable to print good quality photos from it I have to use iPhoto to produce good quality prints. o

I have recently installed Aperture 3.1, but my Canon MG6150 has been unable to print photos of good quality from the Aperture print engine
and I have to return to iPhoto to obtain prints I am happy with.

I have now to reply to my own question having later found a thread over another canon printer with the answer. In the second print dialog box you click on "show details" and then on "layout". The following schreen shots make this clear. The settings can then be saved as a preset.
It's a pity the Canon helpdesk was not able to give me this information. I hope that this will help others with similar problems.
NTMJ

What are the settings in Aperture to work with a Canon 9000?

What are the settings in Aperture to work with a Canon 9000? Canon website says Aperture is not supported. Is it True?

Do you mean the Canon PIXMA Pro9000 printer?
If so, does this help?
https://discussions.apple.com/thread/3681934?tstart=0

Canon iPF Driver Update

Canon has today released an update for their iPF (large format) printers. The update is to resolve text not printing after installing 10.6.7.
In testing to our Canon iPF8300 I found that the recent Font update was not required but I would still recommend this is installed if you have issues with text not printing. I was also able to print with the Fast Graphic Process enabled. A previous workaround prior to the release of the update was to disable this setting, located in Main menu, Advanced Settings.
Here is a link to the Canon iPF Driver Update

Have you tried installing / using the driver for OS X 10.8 on 10.9? I've seen many cases where drivers for older versions of OS X will still install and operate on 10.9.

Is mountain lion ok with canon iPF 700?

it seems that os X 10.8 doesn't work with canon iPF 700
any suggestion for drivers
(no problem with 10.7)
thanks

Hey PAHU...
I got my iPF700 working with ML on my macbook but when I installed ML on my iMac and I think I did the same process but when I try to print I get the following error in the print queue
E [13/Aug/2012:15:36:26 -0500] [Job 9] cmucStartJobRender: Error
E [13/Aug/2012:15:36:26 -0500] [Job 9] cmjcRenderStart: Failed
E [13/Aug/2012:15:36:26 -0500] [Job 9] capdftopdl: Render Error
I have reset the print system multiple times
Deleted printer plist's
Any ideas?

Canon ipf 755 - Mavericks

Hi, I downloaded the driver for my canon ipf 755 plotter after installing Mavericks, but it doesn't work....
Who can help me?
thanks!

Try resetting the printing system.
Reset Printing System
Is the printer attached to the computer or is it a network printer?

Won't print to canon PIXMA ix6820

how can i print to canon PIXMA ix6820 with PSE12?

docforr wrote:
Thanks for responding to my plea.
I get a message that "the saved printer information is not compatible
with this version of photoshop elements or the saved printer is no
longer available.
The printer and Adobe elements were brand new. The printer works with
other programs. It never worked.
PDF
Have you ruled out an issue with the driver for the printer? It is possible that the material on the installation disk was developed prior to PSEv.12. I understand that everything is new, but who knows what the date of production is. You can check on Canon's web site for driver update.

Can't print to Canon LBP7200Cdn after Lion upgrade

Since upgrading to Lion, I can't register (and therefore can't use) my office printer, a Canon LBP7200Cdn.
I tried for weeks to get it to work with the interim driver Canon released with Lion, then gave up and waited for the full driver. Then that didn't work either.
Installation of the driver appears to work fine, but once the printer is registered, printing from any program gives me the error message "/Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl failed".
The problem is the same whether connecting via USB or IP.
I had the same problem when I updated to Snow Leopard 10.6.7, but installing Canon's new driver fixed it. Now nothing works and I haven't been able to print since the summer. No other Mac users are having this problem (but I'm the only one running Lion). Would welcome help from anyone.
Here's the System Profiler info on the printer:
10.0.0.6:
Status:          Idle
Print Server:          Local
Driver Version:          3.40
Default:          Yes
Shared:          No
URI:          cnbma://localhost:59687
PPD:          Canon LBP7200C CAPT (UK)
PPD File Version:          3.40
PostScript Version:          (3010.000) 550
(3010.000) 651
CUPS Version:          1.5.0 (cups-297.2)
Fax support:          No
Scanning support:          No
Printer Commands:          none
CUPS filters:
capdftopdl:
Path:          /Library/Printers/Canon/CUPSCAPT/Bins/capdftopdl
Printer utility:          /Library/Printers/Canon/CUPSCAPT/StatusMonitor/StatusMonitor.app
Printer utility version:          3.40
PDEs:
FinishingPDE.plugin:
Sandbox compliant:          No

I'm having the same issue. I've re-installed the Canon software after deleting all of the folders & files that they talk about in the user manual.
Same issue. /Library/Printers/Canon/CUPSCMFP/Bins/capdftopdl failed
I've sent a note to Canon and here's their first reply.
Thank you for contacting Canon technical support. We value you as a Canon customer and appreciate the opportunity to assist you. We regret that you are experiencing difficulty printing to your imageCLASS MF3010.
We will gladly provide assistance. Unfortunately, it is not clear what is causing this. We will gladly help troubleshoot to isolate the cause:
1. Is the printer connected directly to the computer or through a print server, USB hub or other external device?
Directly to the computer with USB
2. Can you make copies without using your computer? This will verify if the printer is working.
Don't know waiting for my folks to try this.
3. Are you installing drivers from the CD disk or downloading them from the Canon website here:
Downloaded from the website. No Mac sofware on the CD supplied with the printer.
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass _series/imageclass_mf3010#DriversAndSoftware
With this information, we will be able to better assist you.
We look forward to your reply with the information we have requested regarding your imageCLASS MF3010.
Thank you for choosing Canon.
Sincerely,
David
Technical Support Representative
Special Note: Certain issues are very difficult to resolve via email. If you would prefer to speak to a technician for additional assistance, you may call our special toll-free number for email customers with unresolved issues by dialing 1-866-261-9362, Monday - Friday 8:00 a.m. to 8:00 p.m. ET (excluding holidays). If you prefer to continue to communicate via email, reply to this message and we will respond as quickly as possible.

My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
Please describe in detail all you have attempted to do in order to resolve the issue. Contacted Canon's tech support for instance?

Unable to print to Canon ir2022i after 10.9.1 mavericks update.

Hi, we are unable to print to Canon ir2022i after 10.9.1 mavericks update. Can anybody help to find a driver update which works with mavericks.

http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner _2016_2016i_2018_2018i_2020_2020i_2022_2022i_2025i_2030i/imagerunner_2022#Driver sAndSoftware

CS5, Mavericks OS, Pshop crashes on print settings, Canon iP4820

New Mac, on Mavericks OS: Photoshop CS5 will not print to Canon iP4820, quits every time I click print settings. Will print low quality.

Contact Canon to get updates to fix bugs in MacOS 10.9.
And make sure you have the OS and Photoshop updates installed.

Aperture 3.01 Printing to Canon iPF 6100 Broken

Similar Messages

Maybe you are looking for