Aperture 3.03 - images are not automatically set to a GPS location

Hi everyone!
First of all I have to apologize because I don't know the English terms for the Aperture functions, but I am using the German version.
I currently have a big problem by tagging my images automatically to a GPS track.
I can import the track from a GPS file generated with a Garmin eTrex H. I see the track - the purple line of the track. If I go over the line I see the date and time of the point i am over.
If I place an image over a point of the line, I am asked if the other images should be located too. If I answer to do so, just the image I placed is set to the GPS position. No other image! But this was working already some weeks ago!
I checked everything the date and time of the GPS, date and time of the images. But it still does not work.
Does anybody have an hint for me? Is there a problem with 3.03?
Any help is welcome.
Thanks a lot!
Stefan.

Hi villem!
Thanks a lot for the info! I think you are right. All tracks and images are done after the daylight saving time switch. I was used to use HoudahGeo for geotaggging before I was using A3. I updated HoudahGeo and it turns out, that everything was working fine.
I think the problem was, that the GPS turns to daylight saving time automatically but the camera wasn't. So there was two different time zones. I set the time in the camera now. I will see if this helps.
I also tired to set the time zone of the track in A3 but this didn't help! Is there any other workaround for this bug?
Thanks a lot for your help! I was trying this for days now!
Stefan.

Similar Messages

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

What is the problem specifiaclly?
If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
You could also try Image Processor Pro.
Scripts Page

Convert a catalog form PSE 7 to PSE 13 : Conversion works, but images are not related to the catalog anymore so you have to connect each single picture !!! How can I get the right relation automatically ?

My images are not related to the converted catalog, only preview works, tags and other information is given, but the (network) path to the original images is missing and is substituted by a local path with c:\. How can I solve the problem automatically ?

I actually need to apply this to at least a couple different layouts. Two exampled below (The outlined boxes are text areas, the black boxes where the product images will go.)
I prefer InDesign5, but I have 6 too.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

Howdy eewebe13,
So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
Please step through this article for that scenario.
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Thank you for visiting Apple Support Communities.
Nubz

External and internal mikes are not automatically switching over either recording or on voice calls

My laptop model name is HP Pavilion dv4-1100ea which is shipped with Vista Home premium 32 bits and has got service pack 1.
Restored the laptop to factory setting since then I am having the following problems; I had the same problem when my laptop was brand new and whenever I reset the laptop to factory setting I get the following problems:
1. External and internal mikes are not automatically switching over either in middle of the recording using sound recorder or while the call in progress on voice calls (skype):
   Using the sound recorder if I start recording the sound with external mike and in-between recording if I switchover from external mike to inbuilt mike and later on when I play back I can only hear the sound up till where I used the external mike during recording, after the switchover to inbuilt mike I cant hear any sound.
   But if I start the recording with inbuilt mike and in between recording if I plug in the external mike and later on when I play back I can only hear the sound up till where I used the inbuilt mike during recording , after the switchover to external mike I cant hear any sound.
   So in brief both my external and internal mikes are working fine, only problem is that if I start recording (using sound recorder) or voice call with one specific mike, I have to continue with it till the end. I can’t switchover to another mike in between the conversation (voice call) or recording, if I do so, I have to select the mike manually in chat software but while recording I cant even select manually because in laptop, it takes the mike whichever is in current use as default mike in recording tab(sound window). The green tick automatically (in recording device tab) switches over according to the use of mike. Though the green tick in the recording tab is switching over automatically according to use of mikes, its not picking up the sound after switch over during recording.
2. And also when I click on recording device tab in sound window and plug in external mike, though the green tick automatically switchovers from internal to external mike, while I speak both internal and external mikes volume meter respond to the sound inputs by rising and falling but if I take out external mike, green tick goes to internal mike and when I speak only internal mike volume meter respond to sound rising up and down not the external mike.
To resolve the issue I have tried following steps with no luck:
1.I have checked the mikes(internal and external) properties, the both mike shows to be enabled in general tab, in level tab the volume is set to 100 and in advanced tab , all options are selected.
2. In device manager I have got only one audio driver named as “IDT High definition Audio CODEC”. I have uninstalled the audio driver and reinstalled it using scan for hardware option
3. Uninstalled the audio driver in device manager and reinstalled the audio driver using recovery manager > advanced option> hardware driver re-installation.
3. I have updated the BIOS(Insyde F.65, 12/02/2010).
4. I tried to update the audio driver using below link but things went more worse so I did system restore (not factory setting though).
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-67051-1&lc=en&dlc=en&cc=us&...

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

In fire fox and google chrome CSS and images are not loading

I am facing problem with jrun, In IE-8 application is working fine, but in FireFox and Google chrome CSS and Images are not loading.
in fire fox and google chrome requests are Aborted.
thanks
Ashok Gadiparthi.

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

Why aren't my FW (PNG) image are not showing up

Hey guys.
This is really bugging the hell out of me. I feel like I
can't move on until i can figure out why my PNG images are not
showing up in preview (F12). They did yesterday before I deleted
some pages and renamed old pages I no longer needed.
All my images that was done in FW are in my root folder in
the file panel. i didn't move any of those. When I double click on
the image to bring up the "select image source" in the URL it
starts off with two periods then a slash and then the name of where
it's located as well as the name of the image. The "relative to":
is site root. i didn't change any of these setting before I deleted
and renamed pages in my file panel.
Oh, and my Ap Divs show up in light gray boxes.
Please help!
CS3 Mac

I'm confused by the subject line! Is this like 'all of your
base are belong
to us?' 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Dooza" <[email protected]> wrote in message
news:gki5he$3pu$[email protected]..
> Why_ATL wrote:
>> Hey Alan
>> is the filename exactly what it should be? YES
>> Are these .png files for web use, or are they PNG
fireworks original
>> files
>> which are very large in file size because they
contain all the info on
>> layers and such? They are .png files for the web. I
can't figure out why
>> my Div is showing up in preview instead of my images
There just Div's
>> with the little blue question mark.
>>
>> This is getting harder and harder. I'm trying to
laugh so i don't get a
>> head ache over this. This is weird.
>
> Without a link we can only make wild stabs in the dark.
>
> Dooza

I am trying to create an responsive HTML5 output, but images are not showing up.

When I preview my output, the images are note showing up. It is simply the blank outline of the image with the little image icon in the top left corner.
As it is compiling I see the message "Warning: Image maps are not converted to relative size". Is there something in the setting that I need to change, or is that even the problem?

Can you check your output folder: are the images copied to your output? If they are missing, are the images listed in the Project Manager pod in RoboHelp?
The warning is unrelated. Since image maps work with pixel coordinates, you can't simply make them responsive. You are probably using an image map in your project. This is causing the warning. It is not a problem since the image map will still work. But if the image map is very large, it may give a bad experience on smaller screens. You may have to decide whether to change or remove the image map if you want to support mobile.

Images are not reflecting in Multi Level Menu

Hi,
i am facing some problem in the Multi Level Menu.
i have created a book in my portal application.
For the "Main Page Book" i am setting "Multi Level Menu"
For the Book with in the menu, i am setting "No Navigation"(to avoid the sub pages displaying when clicking the book)
for example the Book name is "Home".
i want to replace the Home with some images.
using "selected image" i have placed some .gif
when i have checked at run time that image is not reflected.
when i keep the menu as "Single level menu" images are coming. (but drop down is not coming)
the problem is when i put the menu as "multi level menu" the images are not reflected.
pls help me to solve this issue.
regards.

Hi,
we've got the same issue in the project I'm working on. We told thos to BEA and they said that this is not coded. So 2 BEA's consultants are working on it for us. May be it will be included in the next version of WLP...
Tom

Some images are not loading...including yahoo logo on search pages. Firefox 8.0

most images are not showing up in browser....including yahoo logo on search result pages and icon images in gmail. I have uninstalled and reinstalled firefox.

If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*http://kb.mozillazine.org/Website_colors_are_wrong
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Help! Images are not rendering in any browser!

When online, images are not rendering on any webpage. All other content is fine. Problem is across browsers, BUT, is limited to my user identity. When I create a new user and go online the problem id resolved. I do not want to lose all my user settings. Can anyone think of something I can do to troubleshoot this. Some file I may have deleted, some setting?

Hi all, I am facing the same problems:
Im using an UMTS card to connect to the internet.
On various pages, no pictures are shown. The reason is, that my mobile carrier is using proxies to compress the pictures. Same thing worked fine, before updating to snow leopard. Now the pictures can show up. Safari says, that the pictures were not found.
I tried the umts card on another computer, it worked fine, so t has to do with the update from Leo to Snow Leo....
I already deleted the .plist, but it didnt solve the issue.
Does anybody has an hint or solution??

APERTURE: Small preview images do not show the changes.

excuse my lousy english...
Problem with Aperture:
Small preview images do not show the changes.
I use Aperture 3 since August 2010. By November and 10 projects later it ran normally.
Since the project 11 are in the preview images shown (on the bottom bar in the shared representation) and in the pictures in the books no adjustments. I change for example a picture in b / w it remains in the small preview images bunt even though the great View Erbild s / w is. Even in the books then the famous picture colorful and even grobpixelig.
This is of course in the processing of multiple images per project huntert pretty annoying to have no overview of processed images ...:-(
I had a third installed for books and not as close a relationship.
Does anyone have similar experience or know someone how can I fix this?
Thanks for reading!
Lokoe

Lokoe,
To make sure we understand:
I change for example a picture in b / w it remains in the small preview images bunt even though the *great View Erbild s / w is*.
I am not sure what "s/w" is, but I think you mean:
"I change picture to black and white and the small preview images remain *in color* even though the *big picture in the Viewer* is in B/W."
Even in the books then the famous picture colorful and even grobpixelig.
"In the books the selected picture is colorful and even ???"
"Grobpixelig" -> "grosspixelig" -> "Looks like big pixels???" Not quite sure of the translation. It's been 15 years since I spoke Deutsch!
nathan

Since downloading Yosemite 10.10.2, emails are not automatically downloaded.I have to either click on Get Mail or click in and out of mail inbox.

Since downloading Yosemite 10.10.2, emails are not automatically downloading. I have to either click on Get Mail or click in and out om mailbox.
It's very frustrating as it does not happen on my iPad or Iphone.

Howdy welcon,
It sounds like your Mail application is not checking for mail automatically anymore after updating to 10.10.2. It seems to me that the setting for this may have reset, or changed at some point thereafter so I would check the preferences for the Mail application:
General preferences - Mail Help
Check for new messages
When Mail gets new messages from the mail server. By default, the option is set to Automatically (Mail varies how often it gets messages, based on whether your Mac is plugged into an electrical outlet).
An IMAP account may get messages more frequently if the mail server supports the IDLE command; make sure the option to use it is selected in the account’s Advanced pane in Mail preferences.
If you set the option to Manually, click the Get Mail button in the Mail toolbar to check for messages. (Whenever you click an IMAP or Exchange mailbox, it syncs with the server, and shows new messages.)
Thank you for using Apple Support Communities.
All the very best,
Sterling

Images are not "available" in SRM MDM 5.5 SP5 catalog

Hello,
We have SRM MDM 5.5 P5 and we have uploaded photos in the record table. But images do not appear in the catalog "detail view". Instead we get the default "image not availble" red image.
Is special customizing/setting required to be able to watch images in catalogs?
Thanks in advance.
Will reward points.
Le Radis.
Edited by: Le Radis on Feb 7, 2008 4:31 PM

Hi Le,
There could be the 3 reason while images are not displaying on the catalog end:
1. check all the setting in Data manager as mentioned below which are required:
   add JPG to MIME Types table
   you should see 2 entries in Hyperlink Types table (link and rendered)
   add the 2 types of hyperlink types to the Hyperlink table
   In the Catalog Items table, you can then add hyperlink records for catalogue items.
2. Just check with the OCI mapping has been configured properly via UI:
    go for UI, then login with user as "Master" and choose option as "Shopping Cart" then click on "OCI Mapping" and then field mapping window will open and check for the following entry as tejas mentioned:
NEW-ITEM_ATTACHMENT : Hyperlink-URL
NEW-ITEM_ATTACHMENT_TITLE :Hyperlink-URL Description
3. go for the User specific Configuration in UI as i have mentioned earlier:
Add the image field in your customization then save the configuration.then check on the catalog end.
otherwise customize your setting to the Specific user (you can choose the user from the dropdown combo box ),save the customization and try to login with this perticular user on the catalog end then check for the images.
Hope this will solve your problem.
TNR,
saurabh...
Edited by: Saurabh Kumar Sahu on Feb 11, 2008 8:56 AM

Css and images are not loading in SharePoint website

Scenario:-
System Configuration- Windows server 2008 R2, SharePoint Designer 2010, SP server 2010 all are in Local Machine.
1. I had reset the Windows server 2008 R2 password and opened SharePoint Designer 2010.
2. Opened previous working site and found error- services unavailable- HTTP Error 503. The service is unavailable
3. For this issue, I reset (as I reset for windows server) the Identity password in App pool for "SharePoint Central Administration v4" application.
4. The error "Service Unavailable" got vanished.
But encountered new problem - .css and images are not loading.
5. I re run "Product Configuration wizard" with below steps:-
A) Do not disconnect from this server.
B) No, this machine will continue to host the website
Still Problem persisting.
What tried:-
1. Resetting IIS Server.
2. Restarted SharePoint Admin Services from "Service window".
3. Recycled App pool.
Just do let me know for further information.
I have Checked so may forum and sites but no solution :(
Looking for excellent resolution :)

Check if Style Resource Readers SharePoint group has permissions on the site, permissions to the style library and make sure that this library provides Style Resource Readers with restricted read.
If you don't see Style resource readers on the site, go to that library and set that permission. you could also just load your installation media to a folder, and execute on setup.exe, select repair option. This second option of the installation
media is the cannon vs. flyswatter approach though, but it will work
Stacy Anothersharepointblog.blogspot.com

Aperture 3.03 - images are not automatically set to a GPS location

Similar Messages

Maybe you are looking for