Aperture 3.1.2 is unable to import .tif(16bit) format images

I am failing to import .tif files stored in external hard dirve. The image was created by Sigma DSLR(model SD15; X3F RAW), and adjusted using Sigma-provided image adjustment program and saved as 16bit TIFF format. In Aperture 3, I see SIGMA folder itself but Aperture 3 does not show individual image files inside SIGMA folder even though I clicked the triangle arrow to open individual image files to be imported. So "import checked" button can't be clicked.

Yes! The problem has been solved. Thank you for your help!!
Message was edited by: dkseoul
I did click "Reply" and "Correct Answer" evaluation onto Advice message and then add my message. I don't understand how it became changed to Helpful category.

Similar Messages

  • Unable to import Windows 7 boot images

    When we installed our SCCM 2012 server, no boot images appear to have been created. I have since upgraded to R2, and added CU3, and there are still no boot images available.  I would like to add boot images for Windows 7 x64 but so far have been
    completely unsuccessful.  I have tried creating images with MDT on the server, and they will not import. I have also created them with WAIK 3.0 with the WAIK 3.1 Supplement from a Windows 7 machine, and those will also not import. In every situation I
    receive the following error: The specified UNS path does not contain a valid WIM file or you do not have permission to access it.  Specify a valid path.  This occurs if I try to import from a share on the sccm server, or from a share on
    another computer.  The permissions on the share are set at Everyone--full control share permission, and  NTFS permissions are set to give the system account, the computer account and domain admins full control. The SMSProv.log file shows the
    following error on each failed attempt: Failed to get the image property from the source WIM file due to error 80070002. I have read everything I can find and tried everything that people are mentioning that has fixed the problem for them, and so far
    no success.  I feel like I must be missing something, but I'm not sure where else to look.  Any suggestions will be most appreciated!

    Uninstalled and reinstalled ADK--no improvement.
    Every time I try to import a boot image, the SMSProv log shows this:
    ~  $$<SMS Provider><01-21-2015 15:30:43.623+300><thread=7084 (0x1BAC)>
    CExtUserContext::EnterThread : User=COP\reistg Sid=0x01050000000000051500000010DFF9978E4D14F2AFDA7FC15A0C0000 Caching IWbemContextPtr=000000385D804E50 in Process 0xd80 (3456)~  $$<SMS Provider><01-21-2015 15:30:43.623+300><thread=7084
    (0x1BAC)>
    Context: SMSAppName=Configuration Manager Administrator console~  $$<SMS Provider><01-21-2015 15:30:43.623+300><thread=7084 (0x1BAC)>
    Context: MachineName=xxx.xxxx.xxx~  $$<SMS Provider><01-21-2015 15:30:43.624+300><thread=7084 (0x1BAC)>
    Context: UserName=COP\reistg~  $$<SMS Provider><01-21-2015 15:30:43.624+300><thread=7084 (0x1BAC)>
    Context: ObjectLockContext=1316ccc7-f4be-40c3-9b9e-c34dd1028080~  $$<SMS Provider><01-21-2015 15:30:43.624+300><thread=7084 (0x1BAC)>
    Context: ApplicationName=Microsoft.ConfigurationManagement.exe~  $$<SMS Provider><01-21-2015 15:30:43.624+300><thread=7084 (0x1BAC)>
    Context: ApplicationVersion=5.0.7804.1400~  $$<SMS Provider><01-21-2015 15:30:43.625+300><thread=7084 (0x1BAC)>
    Context: LocaleID=MS\0x409~  $$<SMS Provider><01-21-2015 15:30:43.625+300><thread=7084 (0x1BAC)>
    Context: __ProviderArchitecture=32 ~  $$<SMS Provider><01-21-2015 15:30:43.625+300><thread=7084 (0x1BAC)>
    Context: __RequiredArchitecture=0 (Bool)~  $$<SMS Provider><01-21-2015 15:30:43.625+300><thread=7084 (0x1BAC)>
    Context: __ClientPreferredLanguages=en-US,en~  $$<SMS Provider><01-21-2015 15:30:43.626+300><thread=7084 (0x1BAC)>
    Context: __CorrelationId={2F91BBB1-35A9-0008-97BC-912FA935D001}~  $$<SMS Provider><01-21-2015 15:30:43.626+300><thread=7084 (0x1BAC)>
    Context: __GroupOperationId=13101 ~  $$<SMS Provider><01-21-2015 15:30:43.626+300><thread=7084 (0x1BAC)>
    CExtUserContext : Set ThreadLocaleID OK to: 1033~  $$<SMS Provider><01-21-2015 15:30:43.626+300><thread=7084 (0x1BAC)>
    CSspClassManager::PreCallAction, dbname=CM_COP~  $$<SMS Provider><01-21-2015 15:30:43.626+300><thread=7084 (0x1BAC)>
    PutInstanceAsync SMS_BootImagePackage~  $$<SMS Provider><01-21-2015 15:30:43.627+300><thread=7084 (0x1BAC)>
    CExtProviderClassObject::DoPutInstanceInstance~  $$<SMS Provider><01-21-2015 15:30:43.627+300><thread=7084 (0x1BAC)>
    GetStorage : doing Loggin due to aged out context~  $$<SMS Provider><01-21-2015 15:30:43.627+300><thread=7084 (0x1BAC)>
    ************ WBEM Missing property TransformAnalysisDate~  $$<SMS Provider><01-21-2015 15:30:43.645+300><thread=7084 (0x1BAC)>
    ************ WBEM Missing property TransformReadiness~  $$<SMS Provider><01-21-2015 15:30:43.645+300><thread=7084 (0x1BAC)>
    ~*~*~e:\qfe\nts\sms\siteserver\sdk_provider\smsprov\sspbootimagepackage.cpp(3634) : Failed to read image property from the source WIM file due to error 80070002~*~*~  $$<SMS Provider><01-21-2015 15:30:43.669+300><thread=7084 (0x1BAC)>
    ~*~*~Failed to read image property from the source WIM file due to error 80070002 ~*~*~  $$<SMS Provider><01-21-2015 15:30:43.669+300><thread=7084 (0x1BAC)>
    Auditing: User COP\reistg called an audited method of an instance of class SMS_BootImagePackage.~  $$<SMS Provider><01-21-2015 15:30:43.669+300><thread=7084 (0x1BAC)>
    CExtUserContext::LeaveThread : Releasing IWbemContextPtr=1568689744~  $$<SMS Provider><01-21-2015 15:30:43.678+300><thread=7084 (0x1BAC)>

  • Can't import Canon G12 RAW images into iPhoto 6.0.6

    unable to import Canon G12 RAW images into iPhoto 6.0.6 (Mac OS-X (10.5.8) - any ideas?

    You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
    It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
    Regards
    TD

  • Unable to import my iPhoto library to Aperture.

    I am trying to switch over to Aperture from iPhoto. I wanted to import around 50,000 photos from iPhoto, however every time I tried (3 to date) the library gets corrupted and the photos are unusable. Is there a limit as to how many photos you can import? Obviously the "Import iPhoto library" option is non functional. I have the latest version of both iPhoto and Aperture.

    Would you consider doing an Import From iPhoto in which you leave the masters in iPhoto?
    As suggested, you may also have corrupt images in the iPhoto database. If you have Aperture’s Activity Window open, did it give you any indication where the problem was occurring.
    I understand you may be getting frustrated, but your description of the problem has me wondering what you are seeing. You can try to repair any problem and redo the import (first select the option: “do not import duplicates”).
    "Photos unusable" may be describing the weird image Aperture displays when it cannot find the master. If your Aperture Library is functional, you can use the iPhoto Browser within Aperture to import individual photos that had a problem. But I’m not sure if you are at the stage where you have already generated Previews and if it’s just the Previews that are weird and need to be regenerated, or the Thumbnails that need to be redone. If only the Thumbnails are bad, post back for further instructions to save correct them.
    Be sure and disable Faces and Places in Preferences while you are initially building up your Aperture Library; you can turn them on later if you wish.

  • I am unable to import pictures from my iphone to my computer.  Can anyone help?

    I am unable to import pics. 

    It sounds like you are using an application to import. You can do it manually.
    Start > Computer (on the right) > scroll to the bottom and you will see your iPhone under Portable Devices > Open it and you will see a Drive, open that and there will be a DCIM folder. That is where your photos will be (There may be other folders each holding photos).

  • Unable to import video frompanasonic VDR-D105 DVD video camera to imovie HD

    Trying to import my video from my dvd camera but imovie can not find camera. When I connect the firewire the camera locates DVD player software and allows me to play it on my computer, but not able to import to imovie. DVD Player allows my to clip my video but does not allow me to transfer of save it on my computer.
    If I'm unable to import, Is there a work around to get my video in imovie, say quicktime?
    I am using imovie HD 6.0.3.

    Hi S
    1. DVD-Cameras are for playback - not to be edited from.
    iMovie, FinalCut Express and Pro works with miniDV tape Cameras
    This course DVD and hard disk Cameras compact info to medium BUT in
    a destructive way. You can't get full quality back to be edited.
    miniDV also compacts to tape BUT Non-destructive = full quality to Mac.
    2. Does Your Camera really have FireWire. Most probably You are using
    the USB-cable that was delivered with Your Camera. FW is buy extra.
    Best solution - though sour. Change Camera
    If this isn't an option You'll have to back convert to streaming DV that iMovie
    and FCE/P understands.
    - Converting programs like may be:
    MPEG Streamclip converts from mpeg-1 to whatever you like (within reason).
    QuickTime MPEG-2 Playback Component
    or
    via analog out on Camera via an A/D-box to FW to Mac.
    Non is a good way though.
    Yours Bengt W

  • Unable to import movie files from iphoto '08 into imovie HD

    I have recently bought a 2008 macbook (2.2 GHz) and have recently downloaded imovie HD in addition to owning iLife '08 due to its extra capabilities. I have found that I am unable to import any of my movie files from my iphoto library folder as it seems to need to open the actual iphoto application before the files can be accessed. In addition, when not using any specific program it would be nice to be able to access my photo/video files within the iphoto folder without iphoto automatically opening as the default viewer.
    Any ideas??!! Thanks.

    ahostmadsen wrote:
    .. and I import AVI video clips directly without converting to .dv, without problems.
    lucky you.. .avi is just a container, no 'format'/codec .. I can show you dozends of .avis, which will NOT import into iMHD6, due to being playback-codecs, not convertable by the underlying Quicktime engine into separte, editable audio+video streams ..
    .. If you convert to .dv, the size just blows up.
    dv is 13GB/h and a codec meant for editing; e.g. it stores every frame (video=30 frams/sec) of a recording, as mpegs usually doesn't do so.. = your Mac has to estimate content, when converting and 'recovering' the content = lossy process.
    iMHD6 is a dv-editor; the mpeg4 feature is only a toy, to spice up iSight recordings.. for sure, the QTengine can convert a lot, but too much conversion (from one lossy codec, e.g. divx, into another, e.g. mp4) means a (dramatic) loss of pic quality..
    my 5€ cents ..

  • I am unable to import new photos in iPhoto 11. Perhaps I should just reinstall from iLife disk? Will it affect my photos in any way?

    Hello,
    I have iPhoto 11 installed on my MacBook. I am now unable to import new photos using USB or by plugging the camera directly into the laptop. Never had that probem before with this camera. Perhaps just reinstall iPhoto from the iLife disk?

    Hello Terence,
    Okay I will try reformating the camera's card. However all is well when I export photos to my iMac at home or onto my iPad.
    If your suggestion does not work should I try reinstalling iPhoto from the iLife disk? If so, how do I go about doing that or is there a website somewhere explaining this?
    Regards,
    Tom

  • Unable to import M3U file. Unknown error -50

    Hey guys,
    I am unable to import an M3U playlist into iTunes. Getting the following error message:
    The file "File.M3U" cannot be imported. An unknown error occurred (-50).
    Have any of you seen it and know a way to fix it?
    Thanks in advance.

    Any chance that the Playlist you are importing has some 'special characters'? They are usually fine within the playlist, but the title of the playlist cannot contain them.
    Just a thought....

  • Unable to import table or columns in OBIEE 11G RPD

    Hi All,
    We are unable to import table into the RPD using OCI 10G/11G to import the table then the import box open but we are unable to see the tables below the schema name. When we use ODBC 3.5 and created a DSN for the database then we are able to see all the tables and import them. But the problem here is that when we are using window server 7 64 bit to install client and then importing the table ODBC is not working fine as well.
    Please note that we are using OBIEE 11G which is installed on unix box and we connect to RPD using client installed on windows server.
    Appreciate all the help in advance.
    Thanks,
    Mohit

    Hi Sayak,
    This means we need to installed Oracle client to resolve this problem. Can you please share if you have some knowledge regarding the same.
    Thanks,
    Mohit

  • I am unable to import photos to my computer from my iphone. I need help!

    Everytime i try and import photos to my computer I get an error message on every single photo. It says "The following error occured while importing 'photoxyz.jpg': The exact error is unknown. Make a note of this error code, which might be useful if you seek additional help to resolve this problem: 80210005." I can then try again (which never works), or skip the file. Essentially I am unable to import any photos from my phone. With the iphone 4 i did this all of the time with no problem but now that I have the iphone 5 this is all that happens. How do I import my photos? I don't want to import every single photos on my phone, just the new ones since the last time I imported. Thanks!!

    Are you using Firefox Sync or any other sync service like Xmarks?
    *https://support.mozilla.org/kb/what-firefox-sync
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    See also:
    *http://kb.mozillazine.org/Lost_bookmarks

  • New to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(

    So where is LR trying to copy the files?  Check your destination in the Import panel at the right.

  • Lightroom 4.2.  unable to import. message files were not imported because they cannot be read

    Lightroom crisis:
    suddenly, unable to import images into lightroom - A window comes up that says ""Following files were not imported because they cannot be read". I was in the process of importing images - 10 images were imported from the shoot then the import stopped.
    I tested the card and the card readers by using cards from different cameras and using different card readers. I was able to import the images into a folder on my desktop so know nothing is corrupted.. The memory cards are good, my card readers are good. no setting have changed in my camera. Nothing has changed in my routine. Have been using lightroom for several years.
    I import through a card reader, convert to DNG and save on an external hard drive. All very ordinary.
    No one I have contacted has had nor knows of anyone who has had this problem.
    Unable to get in touch with anyone at Adobe.
    Thank you for any help or direction to tec support
    Barbara Nelson
    [email protected]

    On a quick read, it sounds like the same issue that had me dead in the water for 7 days. (LR 4.2)  I tested everything - my card readers are good, the memory cards are not corrupted, tried different cards from different cameras,etc. Working my way through all my tech savvy friends and professionals, I was lucky to connect with a great sr. tech person at Adobe.  After trouble shooting  all lightroom possibilities (3 hours on the phone) we checked my external hard drive where all the images are stored.  Even tho the external hard drive had plenty of space and "told me" that it was healthy and functioning well, Adobe had me go into the external hard drive's properties/tools and do a "check for errors.  12 hours later after the program went though the drive one file at a time, it found errors, moved them to a separate folder, and now all is functioning OK.  The hard drive had not crashed nor were any images lost.  As can happen after some time there must have been a scratch or similar that prevented more images from being written  (or read) to the drive.  Even though all is working OK at this time, I will replace my external hard drive (and it's back up external drive).just in case there are more "bumps" on the external hard drive.
    My tech knowledge is limited, and I am not intuitive  about anything digital, so can't add any more information then the experience I had.
    Barbara Nelson

  • Is it possible to uninstall OS Mountain Lion and go back to OS Lion?  This upgrade has been a headache! Mail freezes, all contacts all gone and I am unable to import them again.  HELP?

    I recently downloaded and install OS Mountain Lion on my iMac.  Consequently none of the new mail features are available and everytime I attempt to check for new mail or send mail, the mail app freezes and has to be forced closed.  Also, all of my contacts are gone, and I am unable to import them back.  And I just discovered that all of my calendar items are missing too.  Is anyone else experiencing these issues?

    Thank you for the tip, Andreas. That is exactly what I did for my iPad, and it works like a charm. Unfortunately, when I try to set up my Gmail accounts in Mountain Lion using Exchange services, I receive the following error after putting in m.google.com in the server address field:
    The Exchange server "(null)" is not responding. Try checking the network connection, and that the server name is correct. Otherwise, the server might be temporarily unavailable.
    I know this works for iOS, but it seems like this will not work on Mac OS X.
    Any other suggestions? Thank you.

  • Unable to Import objects into ID

    Hi All,
            For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
    Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
    I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
    Unable to move object. Change lists were not part of the same import
    I tried to activate the change list..but no woek.
    Could anyone please advice?
    BR
    Soumya

    Have you checked the GUID in SLD in both the systems?
    <b>SLD-->Software Components, to check the GUID.</b>
    You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
    <b>Note:</b> Before deleting SWCV, make sure any other working objects are not there in the same SWCV. 
    Now, if <b>SWCV & GUID</b> in both systems are <b>same</b> then again:
    1. Export the objects from Dev (.tpz file)
    2. Imort the same .tpz file to QA system.
    Now go to Repository of QA and
    1. <b>Tools --> Import Design Objects</b>
    2. <b>Tools --> Transfer from system landscape Directory --> Update Application Components.</b>
    Select your components and press Finish button.
    And finally try to Acitvate your objects.
    Regards,
    Sarvesh 
    *****Reward points, if found helpfull.

Maybe you are looking for

  • Not receiving email in Apple Mail, only on iPhone

    OK, I've been searching forever trying to find this answer, but I can't... I have two accounts setup in Apple Mail through Comcast... These two accounts are synced with my iPhone using POP... Now, I have never experienced this problem with my first a

  • PDF in Browser: how to activate comments?

    Hello, i generate "normal" PDF's with iText and show it via Plug-In im IE8 Browser. But, the way to comment something into pdf is deactivated. If I open a file with Adobe Reader, comment tools are activated. I need Textbox-Tool to overwrite some secu

  • Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

    Can't get email to go out after updating ios5. Settings look ok can receive incoming and can get to Internet   Help

  • Opening pdf's

    I have used Acrobat Professional for years then spontaneously something changed. If I try to open a pdf I get my photo program, Picasa instead. If I send a pdf it goes through ok but I just can't open them directly.

  • How do i turn off auto complete in lion os

    Can anyone tell me how I can turn off the autocomplete function in Lion OS. Whenever I finish typing a sentence it's made up all kinds of words I don't want! I'm finding it rather frustrating so hopefully there's a simple solution.