Aperture 3.1.2 Raw fine tuning

Started to use manual control on my canon 60D. After importing the RAW files into aperture 3.1.2, the RAW fine tuning controls (except for boost and hue boost) are greyed out and not selectable. Is this normal? The controls work fine with other settings on the camera (Av, Tv, etc.). Thanks!

Actually, looks like the sliders are greyed out on all settings, manual, Av, and Tv?? This just happened recently and I don't think there was an update. I rebuilt the database already. Any suggestions?
Thanks!

Similar Messages

Customising the RAW fine tuning as default for importing. In Aperture 3

RAW Fine Tuning.
I use a Canon G11 PowerShot camera.
I’m being unsuccessful customising the RAW fine tuning as default for importing new files, so each new RAW file imported come into Aperture 3 with the changes from the Apple default.
All I want to do is: reduct the boost from 1.0 to 0.5 and Hue Boost from 1.0 to 0.5.
I made the said changes by moving the sliders.
Then from the cog wheel (in RAW fine tuning) click on save as preset ( give it a name )
I now see it in the list , I click on it - click save as camera default - it now say camera default next to my custom settings.
However when I import new RAW files into Aperture 3, it imports the file with the Apple settings not my custom settings that are marked with camera default.
NB, I had not problem changing the above in Aperture 2 - I have done it before and I believe I have gone through the procedure correctly
Can anyone please help
Thanks Martin

Hi Matthew
What I'm doing is: setting the RAW fine tuning camera default ( to my custom settings) , so all new files being imported into Aperture 3 will take my custom settings as they are imported into Aperture 3.
I did this will Aperture 2 without any trouble . now I have upgraded to Aperture 3 the RAW fine tuning camera default is Apples and I have to change it from Apples to my custom preset.
It shows I have changed the RAW camera default to my custom settings in the drop down list but when I import files - they take the Apple preset not my custom settings ? ?
Martin

Understanding Aperture's RAW fine tuning ?

Dear Aperture Experts,
I have been trying to familiarize myself with the RAW fine tuning brick for a while based on both the manual and internet research. However, I feel I still do not sufficiently understand its functioning and even have more questions now. I have grouped them in two categories below and would very much appreciate any skilled comments.
I use Aperture 3.4.4 under OS 10.8.3 with Digital Camera RAW Compatibility Update 4.05.
Many thanks in advance !
Philippe
A) Overall usage of the RAW fine tuning brick
Under which circumstances do you tweak Apple's default settings at all? I have seen people advocating they never ever change anything here stating it would be almost impossible to achieve any better result compared with the default, whereas others claim the very first thing they do for each and every picture is adjusting the raw decoding parameters, this being the whole gist of using a RAW workflow.
It appears that except for the moiré/radius settings there are adjustment bricks that can achieve similar processing as the other RAW fine tuning parameters. Under which circumstances would it then be preferable to use the RAW parameters rather then a corresponding adjustment?
Apple's default decoding settings are dynamic in the sense that its not just a fixed set of parameters applied to every image. Rather, I could observe that at least two different De-noise settings are applied (with my Canon EOS 7D) depending on the ISO speed: 0 up to ISO 1600 and 0.1 for 3200 and higher ISO speeds. 2a) Are there other parameters that are dynamically changed according to image properties? 2b) Is there a way to keep this dynamic behavior in self-defined presets for parameters that have not been touched, e.g. keeping ISO depending de-noise while using a lower hue boost value? Note that on the opposite it appears impossible to save a preset without changing at least one parameter from the Apple default. This means that you cannot automatically (e.g. at import) apply a static (rather than dynamically changing e.g. according to ISO) set of parameters being identical Apples's default. Strange.
Is there a way to automatically apply different sets of RAW fine tuning presets according to image properties at import time? I know there is the possibility to trigger an applescript subsequent to an import process. Based on this I understand one could apply different adjustment presets therein, but I don't think this applies to RAW decoding presets as well.
B) Individual RAW fine tuning parameters
I think I understand boost/hue boost. No question here
At first glance, sharpening is clear as well. However, I do not really understand how this parameter interrelates with the associated details slider (which used to be an "edge" slider in previous versions, suggesting a different function). When should I tweak one rather then the other? It appears that for my camera those two parameters are always set to 0 in Apple's default. I cannot believe no sharpening is required at all.
I understand that moiré/radius work together, but do they interact with De-noise (which is located in the same section), or is the latter independent from the former pair?
Can the moiré parameter pair be used to reduce chroma noise? I did not succeed at it, the only effect I observed was a hue change in some areas. Does it mean this slider (pair) is restricted to eliminating color fringes along edges in repeating small sized patterns?

That's true, because i've exported the images from my Aperture Library to my desktop (original JPEG settings from Aperture), and at that time i maked the snapshot of the EXIF, but here is the EXIF FROM APERTURE::
http://www.ldbproduction.nl/EXIF_Aperture.jpg
There are what changes in the RAW and JPEG:
So is the pixel size different, the color Depth by JPG is 8 bit and by the CR2(RAW) file is it 16 bit.
And the most stranged thing i see now is that the JPG version is using the sRGB-profile and the RAW used the Adobe RGB (1998), i realy don't know how to handle that in the camera! There is only one choice to make.

Aperture 2.1 doesn't lift Raw Fine Tuning for Canon 40D

Anyone know what's going on here. I can lift all adjustments including raw fine tuning with all my cameras (Canon 1D Mark III; 1Ds Mark III; Mark IIN) except for the 40D. For some reason when I click the Lift button on 40D images the Raw Fine Tuning option in the lift hud doesn't appear. Only Adjustments, Main Rating, IPTC and Custom. I've tried quitting Aperture and restarting. I've also tried rebooting. Problem persists.

First, make sure that you are using full RAW files not RAWs. RAW s is a smaller size setting in the camera which has not been supported by Aperture in the past. Second, try rebuilding your Aperture database. I have a Canon 7d and use RAW. It works fine on my system. You can try reinstallation but if your problem is the RAW version or your database, reinstallation will not address the problem.

I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

When i click on the adjustments everything is grayed out and the messages states " Image Not Found'.
Are you seeing broken arrows or yellow warning triangles, when you enable badge overlays?
That looks, like your original image files were missing. Are your images referenced or managed?
Create a smart album with the rules "Files status is missing" or "Files status is offline". This will show you any images, where the original raw files cannot be found.

Aperture 3 with Nikon D90 - How should raw fine tuning look like?

I try to trouble shoot my Aperture 3 (trial) installation. I have some troubles with the raw fine tuning controls and after reading the manual (again) I noticed that the fine tuning controls I get for my D90 are different from the ones displayed in the manual.
I get boost, hue boost / sharpening, edges / moire, radius, noise-reduction sliders.
In the manual there is no noise-reduction slider, just a check box for Auto Noise Compensation.
I got that control in Aperture 2, but not in Aperture 3. Now I’m wondering if something went wrong with my Aperture 3 installation. That would explain the problems I have with raw fine tuning. But before I try a complete clean install of my Mac i would like to know if I get the right raw fine tuning controls in Aperture 3.
Does anybody use Aperture 3 and a Nikon D90 and could tell me how the raw fine tuning controls he gets in Aperture 3 look like?
Thanks.

Greetings, First be sure you have your d7100 properly set to take maximum detail NEF images.
Go to your d7100 shooting menu and choose NEF (Raw) recording > Type
Choose N Lossless Compressed
Then go to NEF (RAW) Recording > NEF (RAW) Bit depth
Choose 14 bits
You were given good advice that you should not mess with the raw fine tuning brick in Aperture 3.6
Your d7100 has a default RAW import preset - make sure you have somehow not changed that Apple Aperture coded
raw fine tuning preset - this could make all your images far less sharp on import. You can easily revert to the Aperture 3.6 raw import brick default for the d7100 if you have somehow changed it by error. And always be sure to use your Aperture loupe or full screen viewer when applying any adjustment bricks.
Finally be sure that you understand the differences between the Sharpen adjustment and the Edge Sharpen adjustment. Both of these are very sensitive and very different sharpening tools. I do not shoot with a d7100, but use other Nikon FX DSLR's and I have never felt that any of my NEF imports lacked either Sharpness or Edge Sharpness given the Apple Aperture default raw image digital converters for each particular Nikon body. Good luck.

RAW Fine Tuning Engine with 5D mark II - Aperture 3

When comparing the raw fine tuning engine btw AP3 and AP2, I noticed that there are different...I have the feeling the settings on AP3 are too strong
Anyone noticed the same ?
Thanks
Vadim

Oh I see. Can't comment any further then since I don't own a 5D mk2.
But FWIW my D700 files are not that much different.

Raw Fine Tuning 2.0 not available?

I'm using the Trial version of Aperture 2.1.2 and tried editing FujiFilm FinePix S2 Pro raw images. For Raw Fine Tuning, only versions 1.0 and 1.1 could be selected (and thus sliders such as "Recovery" are unavailable). I did a Software Update (which installed Raw Converter 2.5), and I restarted my system. No apparent change: only 1.0 and 1.1 are the choices.
Does this mean that Raw Fine Tuning 2.0 is not available for FinePix S2 Pro raw images?

Perhaps...
I can understand if Apple chooses not to support or to discontinue support for a particular image type, especially given the Fuji circumstances. And I appreciate the ability to do a 30-day free trial. I guess where I got a little irked is that I had to spend time troubleshooting a problem I thought should have been documented (it is not a bug; it was a decision that affects the availability of product features).
Thanks for the replies, Brian.

Latest batch of RAW files has all the raw fine tuning options greyed out

I shoot about 1000 images a week with my 40d and edit/organize all of them in Aperture... the latest batch (a pretty important batch at that) of 800 or so imported fine but does not allow me to use the 'Raw Fine Tuning' options as if they are JPGs. I can still go to the images i imported last week and the RAW fine tuning works fine, even some in the same album... any ideas?
Aperture 1.5.6

more informaion:
today's images imported fine, so you can rule out the security patch.
even more peculiar i exported some of the images, and imported the same masters back in and much to my suprise the RAW fine tuning works. I rebuilt the library hoping that would help but it didn't, I'm just going to go back through the library and re-tag and rate my picks from the shoot, but any idea on how to keep this from happening again? it has to be some wacky setting or something, I can export the broken image and the import it again and it works fine.
any help would be appreciated
mark

RAW Fine tuning

The RAW Fine tuning options are not showing up in my adjustments hud. I have Aperture 1.5.6. I can't find a way to add this to my adjustments hud. How can I add this?

What camera are you using? I don't think that Aperture supports raw fine tuning for every camera—only those with optimized support.
Cheers,
Andreas

Noise reduction - RAW fine tuning and the Noise Reduction tool

Hi,
1- If I get it right, Aperture's RAW fine tuning "Automatic noise compensation" (translated from French) option uses the camera's information to adjust the noise. Is that correct?
2- The Noise Reduction tool is there to provide additional noise reduction, but this makes you lose some details. Is that correct?
3- How do you use them? I often find the Noise Reduction tool a bit overkill, but that's me.
4- This one is just out of curiosity. How does A3 compare to LR3 beta for you in that regard? In my testing, LR3 did a slightly better job (but A3 totally beats the crap out of LR2 for noise). BUT I have an old D50, and newer cameras handle noise better (especially Nikon), so does it really make a difference for a 2008 or newer camera?
Thanks!
Manu

Manusnake wrote:
pilotguy74 wrote:
I don't even have this option/checkbox in my Raw Fine Tuning brick.
I wonder if it's due to the type of files (Canon 7D). Do you still have those 7D files I sent you? Does the checkbox appear in Raw Fine Tuning for you with them?
I noticed this option in the manual the other day, but forgot about it until now.
True, it doesn't have the checkbox with the 7D files. However, it as a slider "noise suppression" (again translated) in the RAW fine tuning options (and still has the Noise suppression brick).
If you don't have this one too, have you reprocessed your images with Aperture 3? Since it has a new raw engine, it may be the cause of it.
I find it strange that Apple didn't tout the new RAW engine on Aperture 3 new feature, it clearly is an improvement over Digital Camera RAW 2, especially in noise suppression.
I agree the built-in noise suppression is much better than A2, but IMHO it pales in comparison with the Noise Ninja plugin from Picturecode. The key is that you calibrate a profile for Noise Ninja by shooting a color chart full screen on your computer at varying iso settings with each of your cameras. You then feed the images back in to Aperture, and tell Noise Ninja to create a noise profile for each setting. The results are amazingly good.
Now with a lot of new cameras, noise processing is getting less important because the high iso performance is so good....but this is what makes Noise Ninja special...even when the noise adjustment is subtle, because it is working from a profile created with your camera, at the iso the shot was made at, its effects are seamless. They just announced a 64 bit plugin for Aperture 3, so no bouncing into 32 like other plugins at the moment...
Sincerely,
K.J. Doyle

Batch edge sharpen or customized sharpen in RAW fine tuning

Do you apply a mild edge sharpen to all your pictures by default or have tweaked the sharpening default default in the 1.1 RAW fine tuning to your likeness or simply stick with the default in the RAW converter and just apply different amount of edge sharpening on an image by image basis?
Peter
Quad G5 Mac OS X (10.4.8) GT 7800

Thanks William.
My question was not primarily, whether you use the defaults for edge sharpen.
Let's explain it a bit more detailed:
Almost all pictures from DSLRs need sharpening to some extend. That basic sharpening usually is done in the RAW converter and can be adjusted with the RAW fine tuning since Aperture 1.1
Since Aperture 1.5 we have the new edge sharpen tool, which is said to give much better results than the old sharpen tool. Looking at the sliders I assume, the sharpening in the RAW fine tuning is done with the same algorithm that is used in the old sharpen tool.
So my idea was, whether it is probably better to trim down or even disable the sharpening in the RAW fine tuning and instead batch apply a small amount of edge sharpen to all my picture. Then tweak the edge sharpen on those pictures that need it.
So far my approach is to use the sharpening in the RAW converter usually set to the Apple default and additionally apply edge sharpen for individual pictures, if I think they need it.
Peter

Docs for RAW fine tuning?

Anyone see any docs for the new RAW Fine Tuning feature? This seems very nice, but I'm not sure I understand what it's doing and when. What's Color Boost? What's Chroma Blur? When are these settings applied? IF I change the setting once does it change for all images that use the same setting?
There's nothing in the 400 page user guide about it.
Thanks,
Allan

Look it up in the next help topic, "Performing Image Adjustments". It's got a hole chapter on Raw Fine Tuning.
Basically, "Boost" is increased contrast up to a measure Apple thinks right for your camera. Works quite well. Chroma Blur gets rid of colour based noise (spots of the wrong colour, e.g. green spots on skin, which is typlical for digital sensors).
The settings are applied after you've migrated your Raw files to Raw decoder 1.1 which you can do by right-clicking on the image and then selecting "Migrate Image". (you can also select all of your images and do the same thing via Aperture's menu... which saves a lot of time).
You can change any of these settings and save it under a new name.
Enjoy and
Cheers,
Karl

RAW Fine Tuning Export?

Hello! It's possible share the saved fine tuning for a camera with another Mac?

What camera are you using? I don't think that Aperture supports raw fine tuning for every camera—only those with optimized support.
Cheers,
Andreas

RAW fine tuning v. general adjustments

I edit RAW images in Aperture2.
What is the difference between making edits in the "RAW fine tuning" window as opposed to the general adjustment windows? (for example, what difference is there between sharpening in RAW fine tuning v. general shapening adjustments.)
Is this related to "decoding" RAW images? What does that mean?

The RAW fine tuning drop down menu allows you to choose between two RAW converters/decoders....the one that Apple used in Aperture 1 and the one Apple uses in Aperture 2. I've never written a RAW converter, but I imagine it's like choosing between two developers when developing your film. They both produce an image from the RAW data but will do so slightly differently and you might prefer the result of one over the other. Chances are, the v2.0 RAW converter will be better just like an Agfa developer from 2000 is likely to be better than one from 1970.
The adjustments you make using the sliders sit on top of the basic image you get from the RAW conversion. The adjustments themselves shouldn't be any different in RAW 1.0 or 2.0, but because RAW 1.0 produces a subtly different base image to 2.0, the end result will be slightly different.
I'll be honest; I've never really looked for or noticed a difference between RAW 1.0 and 2.0, but there must be one or two.
Boomshakalaka!

Aperture 3.1.2 Raw fine tuning

Similar Messages

Maybe you are looking for