Aperture 3.1 & Lightroom 3 wont start after 10.6.5 update

Since I updated to 10.6.5 the whole system has slowed down. The biggest problem is Aperture and Lightroom stop responding when opening up. The strange thing is is that if I click on Aperture to open I get the spinning wheel until I click on "software update" then as if by magic, aperture pops up on the screen. Any ideas guys

CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
CMCSK wrote:
Since I updated to 10.6.5 the whole system *has slowed down.*
How much hard drive space do you have to spare? Did you repair permissions and restarted your computer after you updated?
Try the Aperture forum area - http://discussions.apple.com/category.jspa?categoryID=184
I have 171gb of hd space and I have repaired permissions ect. Everything was fine before I updated to 10.6.5. Can I roll back to 10.6.4 ? Just like having a pc this

Similar Messages

MacBook Pro wont start after 10.8.3 update

So I tired installing the 10.8.3 update from the app store and every time I did it I got the response that it wasn't downloaded properly, first on bad Internet at my house, then at school I used the really fast Internet and it was the same problem. Then I came here found that a bunch of people had the same problem, so I downloaded the combo update from apple.com from a recommendation by someone here
Now its one big shitstorm, after taking a half hour to install on my MacBook Pro ( its a 13 inch i got last august so its brand new), during the install I was on chrome and it kept freezing about 75% of the install complete I tried to shut every program running, that just froze the entire computer for about 5 minutes, let it finish and it said it needed to restart. It said that something couldn't close and it needed to be force quit, so I did that and let it restart.
It turned off, and started the loading screen with the apple and the gear below it spinning, then it froze, a half hour later it didn't change, i shut it off by holding down the power button and tried to start it again now it will go until the screen with the apple and spinning gear comes and then it will just shut itself off after about 2 minutes, tried safe mode, the bar at the bottom will load about 40% then it shuts off,
What do I do now, anything on my own? can i try and take it into the apple store or did I probably loose everything?

It sounds like your internal drive is failing, or has failed. What backups do you have?

HELP ! my ibook wont start after downloading 9.1 update

Hi
i decided to update my os 9.0 on my old ibook, and downloaded all the updates that needed to be installed, i started off with installing the 9.04 update, and after that was installed i ran the 9.1 update, during the installation the system promted for a reboot, and after that my ibook locks up when the "loading" bar is in the middle in the starting screen,,, i dont have much mac xpereince, so i would realy apprrecieate any help !

Hi, honkatped -
Just happened to be around.
Okay - if it boots okay with Extensions Off, then it would appear you have an extensions conflict of some kind.
Re-installing the OS would not fix that. Instead, it will take a bit of work to find what is causing the problem - it may be an incompatibility with some 3rd-party software item.
First, restart - immediately hold down the Spacebar, keep it held down until Extensions Manager opens; it should do that just before extensions start to load (just before the march of icons across the screen starts).
Once Extensions Manager opens, select Mac OS Base from the Selected Set pulldown menu near the top of the Extensions Manager window. Then continue the startup.
If that boots okay, select Mac OS All as the Selected Set in Extensions Manager, and restart. If that boots okay, then some more work will be needed to isolate the offender. Let us know how it goes to that point.

Phone wont start after i tried to update

i have been trying to update the software on my Xperia V lt25i through my computer it kept failing now when i try to start it all i see is the SONY logo then it cuts off. need help?

Download sony update service and retry the update:
http://www.sonymobile.com/gb/tools/update-service/
Charge the phone for 1 hour before.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

My System wont start after setting FSB to 200

My System wont start after I'd set my FSB to 200,
when the system starts, nothing comes up, and my Pc screen LED just blinks,
I have tryed to reseting the Bios but it doesn't help, have also tryed with new RAM and new Graphiccard but it doesnt help.
Please help me:-(
Am I resetting the Bios wrong? I set the jumper to safe mode and 100mhz, then I use the jumper to clear the CMOS. And the restart at set the jumpers back
3ghz AMD BARTON
NVIDIA nforce2 k7bn2 Delta
512 DDR RAM PCI3200
300WATT

Quote
Originally posted by roobster
set the multiplier lower , FSB(200) X multiplier (ex.10.5) = 2100 MHz , and your voltage raise it a bit too let say 1,700 ( default is 1.650 ) If this doesn't work at once , keep booting . My rig started up after 5 times . Strange but true .
does not work if he has a 3000.
they are multiplier locked.

Intel imac wont start after changing permission

intel imac wont start after i changed my hard drive permission to let me read and write, then i clicked apply to all enclosed files.i turned it off no problem. then it never started up again in os x. the grey screen with apple logo appears,then after a minute it restarts, and will keep doing that if i let it. i can start up in windows xp, but i dont know how to do anything in windows xp that will affect os x. i can use the hard drive in target mode, but i cant figure out how that can help me. i use a macbook to view target disk. ive spent hours looking through help and support. finally i do not have the os install disks. PLEASE HELP!

My apologies for the inept instructions.
Restart normally. Open Terminal in the Utilities folder. Paste the commands in the Terminal application to avoid typos:
sudo su
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen. Press RETURN again. Now paste each of the following at the prompt and press RETURN after each.
chown root:admin /Applications
chmod 0775 /Applications
chown root:admin /Library
chmod 1775 /Library
chown root:admin /System
chmod 0775 /System
chown root:admin /Users
chmod 0775 /Users
chmod -R -N /Applications
chown -R :admin /Applications/*
Again, my apologies.

Portege Z930-118 wont start after BIOS update

my PORTG Z930-118 failover and wont start after i upgrading in middle of upgrade i remove power and press shutdown bottom after that i see the power and wireless but screen still black ?
Any help please

Hmmmm.... BIOS upgrade interruption has screwed up BIOS and thats the reason why your notebook doesn't start properly. BIOS is damaged now.
In such case you need professional help by authorized Toshiba service provider.
On this forum you can find many threads about similar problems. Some people have tried to fix this alone and if you are interested to read how one other forum user has fixed it check please this thread.
Ayway, you can contact nearest Toshiba service, explain the situation and ask for help.

770-G45 wont start after ShutDown

Recently installed MSI 770-G45, problem starts when i regulary shutdown comp. from WinXP or Win7 64-bit.Computer wont start after that, like ther is no power, fans dont spin, no bips, NOTHING. I got to unplug power cord and plugg it again into psu, after that it starts normaly.
Strange thing is that computer starts normally when i manualy shutdown system(holding the power button on the case).There is no exception, starts perfectly evry time after manual shutdown, no need to unplugg powercord.
Rest of my components> Phenom II X2 555BE, Kingston 2GB 1333mhz, Sapphire 5770, HDD WD 250gb,PSU Corsair TX 650w.
Tried to change power cord, tried other PSU, other case (tought its maybe power button but no), changed mobo battery, installed several OS versions (XP, Win7) and still dont have solution.
MS 7599 ver. 2.0
Bios version 10.2
MoBo is new bought it 3 days ago.
PLEASE HELP!!!!!

First: It is important to clear CMOS after a BIOS update. Unplug power cable before the clearing, as there can be no power in the system
Second: Rebuild the system, but outside the case. Use only PSU, motherboard, processor, one stick of memory and graphics card. If it works better then, you may have a short, from a stand-off too many, or poorly isolated wire somewhere.
But I second it sounds like a motherboard problem. You'd better contact the one who sold it to you.
Oh, an oldie thing! You will need to install Windows again, with the new motherboard and all.

SSMS wont start after Installing SQLServer

Hello,
After SSMS wont start after updating VS2012. I have unistallled and installed a number of times but the error message I keep getting indicates that Visual Studio shell Isolated is missing. I have tried to install this directly from the set up dvd but
no success.
Also I noticed that VSShell is missing in the C:\Program Files (x86)\Microsoft SQL Server\120\Tools\Binn.
I am assuming that this has something to do with it.
Can someone please tell me how to fix this?
Thank you.
here is the error message received

Hi,
Try the below solution and see how it works.
Note: Take a backup of the key before make any changes on the registry keys.
http://support.microsoft.com/kb/322756
Start regedit.exe
Go to HKEY_CURRENT_USER\Software\Microsoft\SQL Server Management Studio
Delete 12.0_Config
Restart ssms.exe
Here is the original thread:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/aeff13b3-3960-4724-bb9a-7e585651d7f4/sql-server-2012-error
Thanks.
Tracy Cai
TechNet Community Support

Safari wont start after i installed avi player any suggestions?

safari wont start after i installed a avi player any suggestions?

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Lightroom CC wont startup after installation on mac

lightroom CC wont startup after installation on both my mac's, it only hows a splash screen at startup.
I have tried to restart the computer
Anybody know what to do ?

I'm having the same issue and the log out and back in trick is not working for me.
I've just installed and when I try and launch the application, i see the splash screen for a split second and then the application crashes.
It is happening on both of my Retina MacBook Pros.
One is: Late 2013 Retina 15" MBP - 2.6 i7 - 16GB RAM - 1TB SSD - NVIDIA GeForce GT 750M 2GB
The other is Early 2013 Retina 15" MBP - 2.7 i7 - 16GB RAM - 256 SSD - NVIDIA GeForce GT 650M 1GB
Same behavior on both.
I've uninstalled and reinstalled. I've trashed pref files. Not sure what else to do.

Imovie 11 failing to start after 10.6.5 update (same issue with iphoto)

Hi,
My imovie 11 is now failing to start after 10.6.5 update, I reinstalled ilife and it's still failing.
Same issue for iphoto .
Help
Benoit

help help help. imovie 11 works fine until i populate iphoto with any photos what so ever then it just fails to kick off after looking for new video from iphoto. works fine again when i delete the iphoto libary but i don,t want to do this each time i want to use imovie.....very disapointed

HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 updates

Anyone else having issues with third party changers saying "this accessory not supported". I get it every time I plug my phone. It only started after the iOS 7 update?

That's because part of iOS7 had code in it to look for and recognize unsigned cables.
In other words, Apple knew that people used non-signed ones and didn't care....until last month when they decided to care. People with iOS6 and lower should experience no issues (unless Apple patches those iOS versions) but folks with iOS7 will need to deal with it.

Aperture 3.1 & Lightroom 3 wont start after 10.6.5 update

Similar Messages

Maybe you are looking for