Aperture 3.2.3, plug-ins will not install

Downloaded Nik Color Efex Pro 4, will not install. This also is happening with SmuginPro for Aperture (photo uploader for SmugMug websites).

I tried to recreate your problem:
The smuginProInstaller says:
Currently SmuginProForAperture and SmuginForAperture cannot both be installed at the same time. This installer will remove SmuginForAperture as part of the install process.
If you remove SmuginProForAperture you will need to reinstall SmuginForAperture.
I let it remove SmugIn; message: the installation was successful. The plug-in started properly.
I downloaded the Installer from: http://www.apple.com/downloads/macosx/aperture/smuginproforaperture.html
It is dated from: September 6, 2010 11:01 AM
I get as far as application support and dead end, there is no aperture sub-folder.
Just create the folder if it is not there - these installation folders are not there initially; they will be created, if you install something.
The Nik offers only a .dmg installer. Again, terminal window with code, end of story.
Can we see the code, please?
Regards
Léonie

Similar Messages

Adobe plug-ins will not install?

Adobe plug-ins will not install. I have installed the most current reader and flash player.

I get redirected to the download page to install flash player and reader. I then go to the section flash player installs for IT. Click on the following url http://www.adobe.com/products/players/flash-player-distribution.html Nothing happens. Does Adobe flash player include active x plugins?

Plug ins will not download -even they say they have

I download the adobe most recent versions and they appear to download -but on all websites it will not show my picture/slideshows

Your system details list doesn't show that the Shockwave Flash plugin is installed and enabled.
You can find the latest Flash player versions for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
You may have to run the Flash player installer as Administrator (right-click: Run as)

Battlelog plug in will not install

The battlelog game launcher plug in is set to activate, yet it will not allow me to update it.
This needs to be updated to be able to play the game at all, so it is a little frustrating.
Any help will be greatly appreciated.

Did you go to the home page of the plugin?
What does the error massage say?
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Media player plug in will not install in server 2008

after installing firefox 3.6 in server 2008, not the server 2008 r2 but the original.
the firefox it self runs great BUT you can not listen to music in any web site using the media player plug in because the plug in refuses to install saying it can not run in server 2008.
server 2008 is a vista based system and uses many of the same drivers. so why is their no plug in that I can tell it how to install or what to install as and just have it do as it is told to do ?

See:
[[Using the Windows Media Player plugin with Firefox]]
http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

How about telling us in advance what programs or plug ins will NOT work with the new Firefox. I just lost my "safe search" feature with AVG, and I think that's sort of important!

Just upgraded to Firefox 6 (which I like, by the way), but when I upgraded to 5, I lost the gaming feature when I installed AVG, and now I've lost the AVG safe search feature, which I think is very important considering that I have grandkids that use my computer,
How about telling us in advance (and I'm running Firefox, so a link would be easy) whether or not we're going to lose an important feature like the one I lost?
So, how do I get back to Firefox 5 without uninstalling and reinstalling so I can have that safe search feature back?

Attached is Dennis Linam’s Audition – “Log File” and “Log – Last File”
Contact information Dennis [email protected]
Previous contact information with your organization (DURIM):
Dennis - i just finished my audition trial and bought the subscription the 2014 version.
created by durin in Audition CS5.5, CS6 & CC - View the full discussion
DURIM - Okay. I would expect the "Cache Warning" message because your default directories would not be the same as the ones in the settings file I generated.
If you go back to the "7.0" directory and open the "Logs" folder, can you copy the "Audition Log.txt" file and send it as an attachment to [email protected]? We'll take a look in that logfile and see if it gives us more information about why this is failing now.
Also, do you have any other Adobe applications installed on this machine, such as Premiere Pro? If so, do they launch as expected or fail as well?
I do have the trial Pro version of Adobe reader, but I have not activated it, because I fear the same thing will happen did it. I cannot afford to activate the subscription for that product and take the chance of it not working either. I depend on those two programs religiously. Here is the files that you requested. I appreciate any help you can give me to get this audition program started
Audition Log- file
Ticks = 16 C:\Program Files (x86)\Common Files\Adobe\dynamiclink\7.0\dynamiclinkmanager.exe
Sent from Windows Mail

The windows media play plug in will not install or work with firefox, but will with crappy ie. Plese help

I go to the website of microsoft and download it even followed the help page forums on here and it still has an error when loading.

See:
[[Using the Windows Media Player plugin with Firefox]]
http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

Panda3D engine plug-in will not install on windows7 cant install disneys pirates of the caribean

show download screen then trys to reload but goes back to the download screen,just keeps cycling

Here is a solution for you.
1. Go to this link(this is panda 3d app):
http://www.panda3d.org/download.php?runtime&version=1.0.3
2. Choose microsoft windows version
3. Save it on HDD then run to install
4. Once installed you should have no problems.
Let me know if it helped you

Nik Software Plug-Ins are not compatible with Aperture 3

After installing my upgrade to Aperture 3, I get a message when attempting to use one of my Nik Software editing plug-ins. The message says that the plug-ins are not 64-bit (they are 34-bit) and in order to run them, Aperture must close and reopen in 34-bit mode. What does this mean and how do I fix it?

Keli
In order to open Aperture in 32-bit mode by default you can right-click on the application icon, select "Get Info" and check the box marked "Open In 32-bit Mode" (or you can continue to run it by default in 64-bit mode and just get forced to re-open the app anytime you need to use plug-ins that can only run in 32-bit mode).
hope this helps!
Raf

No plug-ins will pass validation (remove property listener?)

Okay, this is strange ..
I gave my iMac a fresh install of OS X Lion and also Logic Pro. Worked with it already but from time to time I want to make a fresh start. I use my iMac only for producing music. For all the other stuff I use a second computer with Windows. This time it took much more time to download and install all the extra packages (like the Jam Packs). I had to restart Logic several times because downloads failed. Anyway, everything must be in the right place now. Here comes the real problem: NO plug-ins will pass the validation!
Yesterday I tried it with my UAD stuff. Nothing. So I thought, maybe I did something wrong. Today I made a fresh install of my iMac and Logic Pro AGAIN. But now I tried it with just 1 plug-in: Microtonic 3. Same problem. The following phrase from the AU validation result shows the same error:
VERIFYING RECOMMENDED PROPERTIES:
VERIFYING PROPERTY: Latency
PASS
ERROR: -2147450878 IN CALL Remove Property Listener
** FAIL
I bought Logic and Microtonic (and also UAD ofcourse) so it must be a problem within Logic or my computer. Tried Google first but wasn't satisfied with the results. What does this problem mean and how can I solve it?
The thing is, everything worked fine (used all plug-ins before). I did also a fresh install in the summer, with absolutely no problems. So I don't understand. Could it be OS updates? Because it's now 10.7.5 instead of 10.7.4. If so, is there a possibility to get .4 back?
Notes:
I used the last installer from UAD > 6.3.1 August 2012.
All plug-ins worked fine before.
Logic Pro was both times the first program I installed. Before I made a fresh install of my computer there were no issues.
I made a clean install twice and both times I checked a plug-in one at a time. No plug-in will validate. Unbelievable.
I wrote a mail to someone who works for the company where I bought my computer. It's a specialist in Apple audio and helped me before with an Apogee Duet 2 problem.
I go for a third clean install in a few days and won't do a software update (of my computer) before I tested Logic Pro first.
Don't know what to do else.

Hi Nomad_76,
I did an update from 10.5.? to 10.6.8. to 10.7.5 - not a clean install. The latter would cost me a week beating my head against the wall ... :-)
Do you get an error for EVERY Plug-in or just for some? Did you install 10.7.5?
In the meantime, Logic got sight of my MIDI Interfaces, now I can change ports and MIDI channels as expected and as named in the MIDI/Audio utility. I don't know what made Logic work for that.
APPLE HELP for me too!

HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc

Plug in will not be loaded

I am new to this forum and ask forgiveness if the answer is already posted and I just cannot find it.
I open a document in my Adobe Reader X there are couple of screens that pop up. I have windows Vista.
1. The file open manager service is not running. When I say OK the next is.
2. The plug-in will not be loaded. OK.
Now the doc opens and I go on. I am not sure if there is something I am missing in the program or what but it is getting tiresome to keep closing the windows. I have had the reader for a while and have had no trouble until about a week ago.
Appreciate any help.

I solved by installing the FileOpen plugin manually from http://plugin.fileopen.com.

The new ACR 5.5 update will not install in Elements 7.0

Hello All:
This situation is now becoming ridiculous (well, for me that is). I just tried to install the new ACR 5.5 update and it is "unable to install" into Elements 7.0. I downloaded the update several times, unzipped the install file, but when trying to install, it just gives me a message that it is unable to install and to hit the "quit" button.
I have a Vista 64 Bit system with 12 Gigs of RAM. I've installed Elements 7.0 and Lightroom 2.5 on my system - all with no problems. For some reason, I could never get Photoshop CS-4 to install at all and I've been through the mill trying to install Photoshop - but nothing worked and had to eventually give up. Trying to get Adobe support for CS installation on my 64 Bit system has been ridiculous in this regard as each and every time I called, I was connected with some techrep located in India who all they did was "parrot" back what I told them - how frustrating. But as I mentioned, Elements 7.0 and Lightroom installed just fine.
The previous ACR 5.4 installed just fine into Elements, but now...ACR 5.5 will not install. It tells me that I do NOT have CS-4 installed so it cannot install. What's up with that? Has Adobe stopped supporting the latest ACR upgrades for Elements? What gives?
Does anybody just have just the newest ACR 5.5 plug-in by itself that they can send me so I can just put it in my plug-ins folder (or a place where I can download it)? Adobe used to just have the plug-in that you could unzip and copy and paste and put it into your plug-in folders - but not anymore. Now they make it an 82 Meg install program and thus some of my problems.
Can anybody help here? Why does the install program look for CS-4, yet overlook Elements 7.0 completely. Helpppppppppp.
Ben

Hi Benherrmann,
Sorry to listen that you havent been able to install the Camera Raw 5.5 plugin.
But as far as my knowledge goes for PSE, PSE never lists Camera Raw plugin for updates in the Updater Preferences dialog i.e., if you will launch Help->Check for updates, a updater window will open. If you will check the preferences of that updater dialog, it will tell you that it never checks for updates for Camera Raw plugin unlike what happens in Mac. In Mac Camera Raw updates does get installs just by installing PSE(v6 of course as there is no PSE7 for Mac. Hopefully there will be a v8 for Mac by the end of october as seen in the last release).
Dont know exact reason why Adobe had configured it in that way? why there is some difference between Win and Mac.
So it prompts me that somehow you need to install Ps CS4 on the machine to get the patch installation through updater. Although this is not Ps forum, would you mind telling what error/issues are you facing while installing Ps CS4?
Regards,
Ankush

Update will not install

Hi,
My computer had to be put into storage. As I expected, when I took it out there was a few updates. Most loaded without a problem but the new update for Leopard will not install.
The blue line only goes a small way then stops. I left my computer on all night thinking it just needed time but it still didn't go past where it stopped.
I can't access iTunes until this update updates.
What do I need to do?
Thanks,
D

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Adobe Flash for my older system will NOT install as per your instructions

Help ... not only can I NOT "reply" to others in these discussions, for some weird reason ... there is absolutely no "reply" button that I can see here ... but when I discovered over the past few days that I can no longer view video clips shared on FaceBook, I followed the directions on YOUR site here, to uninstall Flash, so that I could then reinstall a (hopefully) upgraded version of Flash. Now, I'm totally without Flash, because you don't support the PowerPC's anymore! Also, I've followed instructions provided by one of your forum employees, to try to install the older version of Flash again, and that fails too. Even when opening up the "package" icon, which appears when you right-click the dmg download file. That does not work either! HELP!
I'm on a Mac G5 PowerPC using Mac OS 10.4.11. How do I get flash back? Will I now need to reinstall it using my original Tiger OS software disk??? What a mess this is! Why can't you simply continue to support older systems?
Thank you for any help you can offer. I'm extremely frustrated with this.

Hello, I'm on a bit of a mission spreading the word... I also have a Mac OSX 10.411 (power p.c.). All of the Mac's without Intell went down. Adobe no longer supports power pc's; they only support Mac's with Intell.
The good news is there actually is a simple fix:
* Follow this link and instruction, which are simple (make sure you leave no spaces)
Download to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.http://www.steelbin.com/FPforFBPPC.zip
It worked for me, and all the other "older" Mac users.
Good luck,
Julie R.

Aperture 3.2.3, plug-ins will not install

Similar Messages

Maybe you are looking for