Aperture 3.3.2 Not Ejecting Card After Import?

Has anyone else noticed that Aperture is not automaically ejecting the SD card after an Import even thogh that option is checked on the Import window? I've loaded two cards since the upgrade and so far neither time has it ejected the card as expected.

Jim,
Glad you're happy it no longer ejects the card after import. However, that's not the way it's supposed to work if you have the eject card option checked.
thank you, I think
The way it is supposed to work is not described in the manual, for it is depending on the make of your camera. The manual only states:
Note: The options offered in this dialog depend on the way your camera is made available when it is connected. Some cameras connect as mass storage devices. When you import from these cameras, the Erase and Eject options appear. Other cameras simply connect as cameras, and you will not see either Erase or Eject after the import is completed. In that case, you can erase the images directly in the camera.
I see for all cameras different controls. For my Lumix camera I see the "Eject" button, but no option to choose, if I want automatic eject. The Canon camera does not show any options at all. The automatic "Eject" option I have never seen for any camera I had - only an automatic "Erase", that I never used, for it is dangerous. So up to now I had to live with auto eject, because there never has been an option to select differently.
Apple certainly could improve the documentation of this feature in the otherwise very good manual.
Regards
Léonie

Similar Messages

Where is eject card after import in lightroom 4.1?

where is the "eject card after import" in lightroom 4.1?
'Devices', which is under 'Sources' (for import) has dissapeared, and only 'files'shows, The 'eject after import' phrase and it'scheckbox has vanished.
How do I get it back?
Thanks
Steve

The Eject checkbox is available when the device is selected from the 'From' drop down menu. See below screenshot

Ejecting card after importing photos

I am using LR 2.3 on a Macbook Pro running OSX 10.5.6 and have noted that since switching from the Nikon D200 to D700, when I import there is no check box for ejecting the card after import. When I used the D200, this was present. So, after importing, I now cannot find a way to eject the card and just turn off the camera power. Any ideas on how to retrieve the option of ejecting the card? Thanks.

Lots of griping on the internet about this BTW. See here for example. Or here. It shouldn't influence your connection to Lightroom though.

Eject card after import setting

For some reason there was a setting to eject the flash memory card after an import was completed that seemed to disapear in my version 4 Lightroom. Anyone know where that feature setting is located?

AH, Jim beat me to it but here's my screen dump now I've done one! ;D
You'll need the expanded version of the import screen and to expand the source section and, as Jim says, it'll need to be an ejectable media type.

Eject card on import option

Hi, can anyone tell me where the option to eject card on import has gone in Aperture 3.0.3?
I cannot find it. I'm sure I'm just being a dunce but any help would be appreciated.
Thanks
Aidan
Crank Pictures

Well, I just got it since I happen to be importing photos at the moment. The dialog has 3 buttons: Done, Erase and Eject Card and Eject Card. If it were easy I'd post a screen shot.
Did it disappear when you upgraded to 3.0.3? Any other changes to your system prior to it disappearing? Different card reader, maybe? Have you done the usual "trash your preferences" thing? I hate that, but I guess it does fix some stuff.
Message was edited by: phosgraphis

How do I eject iPhone after import to iPhoto?

How do I eject iPhone after import to iPhoto?

You don't need to eject the iPhone after importing, if it has vanished from iPhotos's source list in the sidebar. Then it has been dismounted.

Can not eject CD after playing

After installing 7.7 (43) I lost the capability to eject a CD without quitting ITunes. I open I Tunes and using the lower right button to eject will not eject. Screen indicates the itunes is being used by another program. I have to get out of itunes and then eject the CD.
Did not have this problem before the update soft ware.
I have did the first aid bit, and verified permissions. Did not solve problem.
I shut the computer down and rebooted, still have the same problem.
Any help available?

Here's an alternative to using the F12 key to eject a disc - *Enabling an Eject menu* You can enable another means of ejecting disks by opening the folder System/Library/CoreServices/Menu Extras and double-clicking the file "Eject.menu". An eject icon will appear in the menubar that can be used to close and open selected optical drives.
(However, it probably won't solve your problem of iTunes being in use.)
 Cheers, Tom

Yosemite "[Thunderbolt 2] disk not ejected properly" after sleep

Since installing Yosemite, when my Mac Pro comes out of sleep, I get a "Disk not ejected properly" for each disk drive attached by Thunderbolt 2. This all worked fine on Mavericks.
(I have a similar problem with my dual displays, which again worked fine on Mavericks - I've posted this on a different thread under Mac Pro).
The manual solution is to physically unplug the drives, but doing this more than 10 times a day is not impressing me.
Mac Pro 2014, OSX Yosemite 10.10.1, dual DELL U2713HM monitors, La Cie 2Bug Thunderbolt 2

Not sure how that helps Illaass - that thread is just another question with no answers. It might be an idea if you read the thread before suggesting it?
There is another thread that suggests a solution (link below), but I've attempted that fix with no success. I also get the "Scheduled Backup Failed" that is mentioned by others.
Re: Yosemite ejects external drives
Note that none of these issues happened before upgrading to Yosemite - everything was fine on Mavericks - and it appears as though Apple are keeping quiet on them.

Delete from memory card after import

Hi,
I'm a fresh Lightroom newbie, and I am missing how to delete pictures from a memory card as I am importing them into Lightroom. This seems a glaringly obvious feature, so it must be hiding somewhere.
The only options I can see in the "Import Photos" dialog are
- Copy photos to a new location and import
- Copy photos as Digital Negative (DNG) and import
There doesn't seem to be an option to delete files after import, just various ways to eject the card.
I've found one way if I choose "Import Photos from Disk" while in Lightroom, there I have a Move option, but why not from device? Every other photo importer has this.
Thanks,
Zak

Thanks for your responses. I'll go ahead and use "Import photos from disk" and change to my card reader. I personally had no problems in my years reading & immediately deleting files from memory cards. I had a few instances where I inadvertently deleted a fresh imported picture on the computer, I used undelete utilities on the card in these cases.
That said, I still think it would be a good feature. If the users want to do it (2 years of questions), just let them.

My imported backup html files from another computer do not show up after import

I am currently transferring files from my macbook pro to a pc netbook. I already exported my firefox bookmarks via an external drive and accessed the html file on my new netbook. After importing the html on firefox on my new netbook, the bookmarks do not show up on my bookmark list.

Please see this article on how to move your bookmarks and settings from one computer to another: [[Moving your Firefox bookmarks and settings]].
Caution: Restoring bookmarks from a backup will overwrite your current set of bookmarks with the ones in the backup file.

Spoken work files will not play even after importing/converting?

I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcast spoken word ones, they just will not play. When I double click on the file it looks like it is about to play, the apple icon at the top switches to what looks like a progress bar, though it is different from other tracks that do play, and then it immediately switches back to the apple icon and does not play.
Any ideas of anything I can do?
Thanks.

I've found an issue with movies when the audio is IMA format. Is that the format of your audio?

Photos on photo stream not in library after import from memory card

I imported photos from a memory card and they appear on the photo stream but not in the event I created in the library at the time of import. How do I get the photos into the event in the libray. Clicking and dragging doestnt work.

Are they in Last Import?

Lightroom 3.3 not showing photos after import

This is a new situation and I have not been able to find the solution in my research. After I import photos from my memory card they do not show up in lightroom. The screen is blank. Please tell me how to correct this. Thank you very much

I think we need a bit more information...
First, by "blank" do you mean a gray rectangle? Or do you get a window with a '?' in it? How are you importing, what settings, etc.. Add, Copy?
If you get just gray rectangles for the images, the most common culprit has been a corrupted display profile. You can test this by setting your monitor profile back to sRGB briefly and see if that fixes it. If it does, you need to recalibrate your monitors.
The other culprit we've seen is a corrupted preferences file. Try deleting the LR preferences and see if that helps. But I'd try the monitor profile first!
Cheers!

&DISPLAY_USER not working properly after import/export of application

I'm getting some weird functionality.
Several variables are no longer working after I exported and imported a page into the same HTMLDB environment
for example at the bottom of the page I now get:
User: &DISPLAY_USER Language: &BROWSER_LANGUAGE
I verified that the template are the same in both cases.
I also get the same error in one of my links
with
&SESSION not resolving.
Any suggestions are welcome.
Thanks,
Erik

Erik,
Items using that syntax need a period at the end (&DISPLAY_USER.) when the application uses "exact substitutions mode". Some of our older applications used "non-exact substitutions mode". Perhaps you exported the page from such an application.
Scott

My Video and Audio are not syncing up after importing

I am trying to edit a few Ipad Clips in premier pro. My video and audio are not syncing. They are .mov lower resolution from the ipad. The original audio is fine - but after I put in a sequence the audio is off a few seconds (ahead). I did not add any affects or change anything. Please advise?
Thanks for any help in advance.
Allison

Premiere does not work well with variable frame rate video which, I expect, the ipad produces, You might have to convert the footage before you import it into Premiere. Do a forum search for variable frame rate, there are a lot of posts.

Aperture 3.3.2 Not Ejecting Card After Import?

Similar Messages

Maybe you are looking for