Aperture 3.3.2 "post crop" problem

After I crop (with image full screeen) I can't change the focus image -- either with arrow keys or a swipe.
I have to exit full screen, and use the trackpad to select the focus image, after which everything is OK (until the next crop).
These are raw images on an external thunderbolt drive.
Any ideas?
Thanks
---rdf

I am also suffering from this odd behavior.
It seems that focus is lost only when having checked the option "Create new versions when making adjustments" (Preferences -> Advanced). Otherwise the focus in the thumbnail bar stays active. Even after cropping. Needless to say that disabling this option is not a solution.

Similar Messages

Photoshop CS6: Question about Resolution when Post-Cropping Film Scans

Hopefully, somebody with more understanding than I on this topic, can help me with this.
I am about to get a film scanner I have on order, to scan in 35mm negatives. I've had one before but I had problems with the model and had to return it.
When scanning film frames, I like the idea of setting the scan area marquee, at the scanning stage, so that it scans slightly beyond the film frame edges, so that I can carefully crop to the edge of the film frame later, in Photoshop CS6, rather than setting it, at the scanning stage, and then later, when examining the film frame in CS6, maybe discovering that I have not scanned to the edge of the film frame quite enough, as I can easily zoom right into the image when in CS6, to carefully examine where the film frame edges are.
My concern about doing it like this, though, is that I may be reducing the resolution of the image. For example, say I scan a film frame in at 3600ppi, and later crop the image slightly in CS6 in order to precisely trim off any slight amount of black around the film frame edges. By cropping the film frame like this in CS6, am I reducing the image resolution of the film frame to lower than 3600ppi? As I best understand it, I do not think post-cropping like this results in any reduction in image resolution, but am I correct in thinking this?

Hi.
The scanner is a Reflecta ProScan 7200. As I said to station_two, I am in London. I understand the brand is known as 'Pacific Image' over in the US.
The scanning software I will be using it with will be 'SilverFast Ai Studio 8'.
Do take a look at this excellent review of the scanner:
http://www.filmscanner.info/en/ReflectaProScan7200.html
(I may be incorrectly assuming too much when on these forums that I am speaking exclusively with folk from the US - the way you spell 'labour' makes me think you are not from the US?)

Fixed 5.2rc: ...images processed with PV2003 were adding a post-crop vignette...

From the release notes:
"Catalog containing images processed with PV2003 were adding a post-crop vignette when catalog upgraded to Lightroom 5"
Does that mean all my PV2003 images (10,000+) now have a post-crop vignette included in their edit history? Or some? Or some special combination?
I converted my v4.4 catalogue a couple of days after v5.0 was released, so I really don't want to go back to my old v4.4 catalogue and re-convert...
Any ideas?

The "fix" works as follows:
1. If you use LR5.2 RC to upgrade a catalog containg some PV2003 images, there will be no issue....i.e. you will not see the unexpected "Post Crop Vignette Style: Paint Overlay" entry in the develop History.
2. If you open an LR5 catalog which was created by upgrading from an earlier version using LR5.0, any PV2003 images will STILL show the "Post Crop Vignette Style: Paint Overlay" entry in the develop History, BUT it will no longer have the problem of losing all intervening history steps should you click on a prior history step.
3. Any already-lost history steps caused by the problem in LR5.0 will remain lost.

Oracle 8.0.5 Post Installation Problem

Hi all,
I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
However, I am running into a couple of post-installation
problems.
1. root.sh (sucessfully ran).
2. glibc patch (successfuly ran). There were a few errors on the
screen with the "mv" commands (file does not exist). Is tha
alright?
3. catrep.sql (problem). This is where I have a problem.
I ran dbstart as oracle805 (installation account), but I have no
idea whether or not I really started the database. ps -aux did
not yield any clue.
I also tried svrmgrl and "startup", but the file "initXXX.ora"
did not exist, so I copied the existing "init.ora" to
"initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log gave
me the following:
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
So, in other words, I have no idea whether or not I have
successfully installed Oracle. All insights are greatly
appreciated.
Thanks a bunch...
Anh
null

Phan Anh Tran (guest) wrote:
: Hi all,
: I have installed Oracle 8.0.5.1 is installed on my RH 6.0 box.
: However, I am running into a couple of post-installation
: problems.
: 1. root.sh (sucessfully ran).
: 2. glibc patch (successfuly ran). There were a few errors on
the
: screen with the "mv" commands (file does not exist). Is tha
: alright?
: 3. catrep.sql (problem). This is where I have a problem.
: I ran dbstart as oracle805 (installation account), but I have
no
: idea whether or not I really started the database. ps -aux did
: not yield any clue.
: I also tried svrmgrl and "startup", but the file "initXXX.ora"
: did not exist, so I copied the existing "init.ora" to
: "initXXX.ora". XXX is my ORACLE_SID. Instead alert_XXX.log
gave
: me the following:
: ORA-00202: controlfile: 'ora_control1'
: ORA-27037: unable to obtain file status
: So, in other words, I have no idea whether or not I have
: successfully installed Oracle. All insights are greatly
: appreciated.
: Thanks a bunch...
: Anh
Hei !
I also did this fault :-( See this webpage - it's excellent
and describes everything.
http://jordan.fortwayne.com/oracle/rh6x.html
null

Posted these problems of Zen Micro bef

oh man, I posted this problem before, and I'll probably get the same answer, but anyways, I'm kinda mad because my Zen Micro is having soooo many problems right now. .battery drain when not on, and no, I do not have that one fimware that has that known problem. 2. if the headphone is not in just right, the sound when seem like it's far away. 3. If I touch the top of the jack of the headphones that goes into the Micro, the music will stop playing, until I ge the jack EXACTLY in the right place. that is all the problems I have right now......but anyways, It is very annoying to recharge your Micro overnight, take it school, only to have the battery dead cuz it said overnight after it was done charging........ I'll probably get the same answer I got last time, contact creative, but I was wondering if you think the place I bouught it at would take it back, (Circuit City)i'm gettin pretty mad Creative....... I bought this hoping I wouldnt have this many problems.....Message Edited by augi55 on 08-20-2005 09:3 AM

On account of it being a headphone jack problem, of which there are many, it's quite possible they'll cover it for free even if you're beyond the warranty period (Parts: year, Labor: 90 days). Normally you'll need your receipt for proof of purchase date, but again, with the issue being a headphone jack, it may not even be required.

Post installation problems in vista 32bit

Sir
i am newbie.i installed 10gr2 in my vista,but sometimes its starting perfectly and sometimes not.Then i need to restart my machine and then only i am getting access in sql*plus.i have posted it here but the problem is still the same.[post installation problem its not solved yet|http://forums.oracle.com/forums/thread.jspa?threadID=930824&tstart=0] .
when the command maintained bellow is leaving no output at all.
emctl start dbconsoleIN the service panel is showing dbconsole status as server starting only.
what to do?
regards
Sayantan

Hans F wrote:
1) Vista is not an operating system. It is a family of operating systems. Which operating system within that family are you using?windows 7.
>
2) Oracle Database is designed to work on a server. It should have a static IP address and host name, or at least use a loopback adapter as a workaround. How is the IP address and host name on your Vista-xyz assigned?
using it for local machine in laptop.
HOST = FAXCOOLWAREZ037)(PORT = 1521)
>
Hopefully you are not using DHCP to assign the IP address, or you were sharp enough to install the loopback adapter first.

PS CS5 Extended - post crop vignette in Camera Raw 6?

The post-crop vignette sliders don't seem to be under Lens Correction in this upgrade - can anyone tell me where they are please? Thank you.

You probably need ACR 6.1. Check the Camera Raw forum.

Clarifying my question from last pm, re: how do I get LR to stop applying post-crop vignette at time of import to all my photos?

I work on a Mac, shoot in raw, and download directly to hard drive from my camera. I then import images into Lightroom using the "copy" function. For some reason, Lightroom is systematically applying a post-crop vignette to my photos, I am unable to turn it off. Happens regardless of lens I shoot with. Can anyone advise how to change this? I have tried re-setting the vignette to zero before importing, but that does nothing. Regards, Barb in Virginia

Go to Preferences and reset your Default Develop Settings if you want to reset for ALL cameras and file types.
If you want to reset the default for a single camera, in Develop you can hold the Alt key and the "reset" button will change to "set default". The following dialog will appear. Click "Restore adobe default settings"
You should then not have vignette being applied.

Where are post-crop vignetting controls in ACR 6.7

Post crop vignetting was added into an earlier version of ACR (in CS4), but this function does not appear under Lens Corrections in my version of ACR 6.7. Where are these controls now?

Under fx, at least in 7.1.
Richard Southworth

Lightroom 4 Post-Crop Vignetting.

Hello,
I have lightroom 4 on a Mac.
In Develop mode > Effects > Post-Crop Vignetting the Highlights slider is greyed out.
I have tried different priorities , all positions of the sliders.
Any ideas?
Thanks

Hello Victoria,
That is the answer, a negative value.
I moved all of the sliders but did not move this one back into the negative.
Thanks for your help

[CS4] Post login problem

Hi everybody,
I’m facing a problem I can’t solve as I’m not an expert with php : I have created a site of which first page is a login. On the second page I would like to retrieve informations from a database based on the logged on user ID. Here is the problem : I don’t know how I can insert the user ID on the SQL request (on page 2). I’ve tried to put as Run-Time value of my Recordset template $_GET[‘MM_Username’] but it does not work. Creating a session value into the bindings panel allows me to display the correct ID value (therefore MM_Username) on the HTML page but still I can’t do anything with it into my SQL request… I’m lost !
Thanks in advance for your help/advices
Best regards

Sure ! Here it is (code was generated using the server behaviors panel “Log InUser”)
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION < 6) {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
?>
<?php
// *** Validate request to login to this site.
if (!isset($_SESSION)) {
session_start();
$loginFormAction = $_SERVER['PHP_SELF'];
if (isset($_GET['accesscheck'])) {
$_SESSION['PrevUrl'] = $_GET['accesscheck'];
if (isset($_POST['Identifiant'])) {
$loginUsername=$_POST['Identifiant'];
$password=$_POST['Password'];
$MM_fldUserAuthorization = "niveau";
$MM_redirectLoginSuccess = "Menu.php";
$MM_redirectLoginFailed = "erreur.htm";
$MM_redirecttoReferrer = false;
mysql_select_db($database_Main, $Main);
$LoginRS__query=sprintf("SELECT identifiant, passe, niveau FROM repertoire WHERE identifiant=%s AND passe=%s",
GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text"));
$LoginRS = mysql_query($LoginRS__query, $Main) or die(mysql_error());
$loginFoundUser = mysql_num_rows($LoginRS);
if ($loginFoundUser) {
    $loginStrGroup = mysql_result($LoginRS,0,'niveau');
    //declare two session variables and assign them
    $_SESSION['MM_Username'] = $loginUsername;
    $_SESSION['MM_UserGroup'] = $loginStrGroup;
    if (isset($_SESSION['PrevUrl']) && false) {
      $MM_redirectLoginSuccess = $_SESSION['PrevUrl'];
    header("Location: " . $MM_redirectLoginSuccess );
else {
    header("Location: ". $MM_redirectLoginFailed );
?>
De : MurraySummers [email protected]
Envoyé : vendredi 8 mars 2013 18:20
À : Berurier75
Objet : Post login problem
Re: Post login problem
created by MurraySummers <http://forums.adobe.com/people/MurraySummers> in Dreamweaver - View the full discussion <http://forums.adobe.com/message/5132803#5132803

After i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.

Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.

Can the post crop vignette be changed to the original vignette effect?

I must say I'm surprised and disappointed that the post crop vignette uses a different effect to that of the original lens correction vignette.
I can't figure out why this has been done & to my eyes, it's very inadequate.
Is there any workaround, or can this feature please be changed in a future release?
What makes it worse is that this was one of the reasons I made the upgrade to Lightroom 2.0... But I really can't use this effect as it stands.

The original lens correction vignette functioned like a lens vignette would--by lightening/darkening exposure in the corners of the image.
the present post-crop vignette appears ot be an overlay of either black or white, with variations in opacity, size and feathering. Consequently, it very much has the appearance of a post-processed mask overlay.
The big areas in which I see differences between these effects are 1) in the highlight regions. Whereas the original vignette would restore some of the blown out areas in a highlight, the new post-crop vignette only greys out these areas with a darker or lighter region (no detail), and 2) in areas of color--instead of seing a restoration and accentuation in color (eg. in a slightly blown-out sky or background), the new filter further greys this area with the application of a black/white mask of varying degrees of opacity.
It is my opinion that the original filter had a certain class to it in the way it would replicate lens effects. The new filter looks like a photoshop effect, and in a way, sadly, that I really don't have a great use for.
I hope that clarifies some of the things I've said.
Can we see a restoration of the functionality of the original vignette to the post-crop version in any upgrade to Lightroom 2.0?

Video & cropping problems

My system equals:
Lightroom version: 4.0 Beta [800002]
Operating system: Windows 7 Ultimate Edition
Version: 6.1 [7600]
Application architecture: x64
System architecture: x64
Physical processor count: 4
Processor speed: 2.4 GHz
Built-in memory: 8191.0 MB
Real memory available to Lightroom: 8191.0 MB
Real memory used by Lightroom: 590.0 MB (7.2%)
Virtual memory used by Lightroom: 543.2 MB
Memory cache size: 1083.2 MB
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080
While in video, using captured frame – my picture is extracted at 19 20 x 10 80.
Attempting to use this picture in the books module causes resolution problems yet the same picture when used in the print module and save to a picture file causes no resolution problems and becomes 255 0 x 3300 when using it in the book module.
Multiple Cropping problems have been reported already and I have read tech support is looking at some of these problems - hopefully they will fix the following
In crop the custom dimension will not exceed 5 changes (would like to be able to see it built out to 10 custom sizes) and it no longer overwrites the last dimension change. It defaults to 2×3/4×6
NOT WORKING like LTRM 3

Some thing here might help:
iMovie 11 tutorials:
http://help.apple.com/imovie/
http://www.apple.com/ilife/tutorials/#imovie
and also these:
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

I just posted a problem and gave you my email that i cannot get into.

#
i just posted a problem and gave you my email that i cannot get into. i have another email address for you to send an answer for me. [email protected]

What does the page say? What do you need help with?

Aperture 3.3.2 "post crop" problem

Similar Messages

Maybe you are looking for