Aperture 3.4.1 Zoom out at 25% not working

Hi,
I just remarked that the Zoom Out at 25% with Aperture 3.4.1 doesn't work any more...the maximum Zoom Out is now fixed to the size
of the window. I'm pretty sure that this worked on Aperture 3.4 though.
While not a big problem, I like to view my photos at smaller size, to see how they look like on small printouts.
Does someone have the same issue with Zoom Out with Aperture 3.4.1?
Cheers,
Gilles

I could not get to work since Aperture 3.4 either. Zoom out now seems to stop, when the image fills the window.
As a work-around, select more than one image in full screen mode, and you can zoom out to 25%.
Or put the image on a Light-Table; then you can zoom out to really small thumbnail sizes.
Regards
Léonie
Four image in Full screen view selected, zoomed in out differently (25%, 25%, 100%, 200%), for example:

Similar Messages

The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens.

The zoom in zoom out gesture doesn't work on my iPhone 5c. Like when opening an app it doesn't zoom out and opens. It also doesn't zooms in while pressing the home button to return. The gesture is just like any other Android phone. Like while closing an app by pressing the home button the icons seem like zooming in and falling back to their respective places. This thing happens in my friends' iPhones but this thing doesn't happen on my iPhone 5C. Please help.. I am unable to find anything wrong with the settings either.
Message was edited by: Prats20

I have another query though. Is it possible to always logged into my Gtalk from iPhone? I am using an app called Gtalk Lite. But every time I double press the home button and swipe up the apps to close them from running in the background Gtalk lite logs me off. I have to log in to Gtalk lite again. I was looking for something like that happens on Android phones. You are always logged in even after you close them from running in the background. And also is it possible to log in to more than one gmail account on Gtalk in iPhone?

Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason.

Zoom-in, zoom-out pinch gesture stopped working a few days ago for no apparent reason. I went to Preferences>Gestures, turned off the selection, turned it on again, rebooted, etc. HELP. Any suggestions?

Try Settings>General>Siri>Off. Restart the phone then go back and turn Siri on again. It can take a few minutes for Siri to totally activate again.

Urgent : SSRS reports zoom in option is not working in IE9 compatability view

Hi,
We have SSRS reports which when viewed in IE 9 compatability view, zoom in option is not working properly.
SSRS report have 4 charts inside a rectangle. when zoom in from 100% to 50% only rectangle shrinkes not the charts.
Please let me know why it is happening and solutions if any?
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Hi Wendy Fu,
Thanks for your support. Below are the steps and screenshots as per your requirement.
/*******************Below are the steps to replicate ************************/
This document explain IE9 compatibility issue with SSRS report (SSRS 2008 R2 and IE9)
Tools and software used:
Reports are rendered on Share Point 2010 server which uses SSRS 2008 R2.
Reports are accessed using web browser IE9, IE10 ….
Problem statement:
To work OTHER reports compatibility mode in IE should be ON
To work SSRS reports (mainly zoom) compatibility mode in IE should be OFF
OTHER report is being used by customer and they will start using SSRS reports as well. While using both OTHER reports and SSRS reports customer do not prefer to keep switching between compatibility modes.
“Browser Mode: IE9”
Steps to reproduce Zoom issue for SSRS report with Compatibility mode is given below:
Step-1: Select Tools menu -> Compatibility View Settings
Below setting is suggested for OTHER users so tick as shown below,
Step-2: On decision center select link and Open the report home page and click the link to open the report.
Step-3: On SSRS reports Change Zoom level from 100% to say 50%. Here all charts are not moved with container frame.
If “Browser Mode: IE8” is set with following steps then this issue does not happen.
Press F12 and from and select IE8 as shown below.
Press F12 again so this will set the mode and then try Zoom option it works fine. However this setting temporary and will remain for the session only.
If compatibility mode is OFF then also this does not happen. Please see image below.
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

XI ALERTS with out BPM Are not working.

Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.

Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan

Read Out loud is not working

I can't get some PDF to read out loud. Any idea why? I am able to select and copy the texts so it's not an image for sure. If I paste the texts to word or some other app, I can use the text to speech from my Mac OS to read out loud and it's working fine. Any suggestion is much appreciated.

Here's something new. This is one, http://www.ponemon.org/local/upload/file/NokNokWP_FINAL_3.pdf, of the many files that read out loud did not work. After reading your email, I thought I tried something new. The PDF in this link here read out loud fine in Safari and Chrome browser but when I downloaded to my computer it did not work in both Reader or Pro v11.0.10. I have a MacBook Pro Yosemite. That is very strange.

HT5634 i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

i have upgraded to windows 8 but found out it will not work? How do I go back to windows 7?

Welcome to Apple Support Communities
You have to format your Windows volume and install Windows 7. First, insert the Windows 7 DVD and hold the C key while your computer is starting. Then, follow the steps and, at partitioning step, choose your Windows volume (it's the last volume listed in your display), choose Advanced options, and format it. Then, install Windows.
Finally, after installing it, install the Boot Camp support software > http://support.apple.com/kb/DL1630
Windows 8 is only compatible with some new computers. See > http://support.apple.com/kb/HT5634

Continuous forest line speeds and zooms out or view NOT, but should?

Here is my simple problem which I can not resolve.
I will try to make as a detailed description as possible as I can not figure out which step needs to be corrected.
I would like to create a landscape view as seen by someone on a sleigh ride down the hill.
It starts with a winter forest extreme close up then trees start to move to the left ever so slightly, then speed up down hill and then decelerate and zoom out into a thin line on the horizon while slowing down but still moving to the left of the screen.
The way I decided to create this scene:
I created a nice multi layered file in Illustrator with all the trees overlapping each other. The file is to the maximum artboard width allowed by Illustrator.
I imported this multi layered Illustrator file into After Effects as a Comp with separate layers.
I assigned slight movement in the layers from right to left at various speeds. It gives a dimension to the view as you see one line of trees passing behind another at slightly different speed. This step does not seem to create any problems.
I kept on building the continuous line of trees extending to the right by duplicating imported Illustrator layers until I reached the limit of After Effects Comp canvas size. I believe it was at either 30000 or 60000 pxls. The reason why I need trees so large is because at the beginning of the animation we see them at an extreme close up with all the leaves and branches visible. Then the forest line starts to move to the left and speeds up.
Eventually it speeds up and zooms out at the same time enough to reach its end on the right. By this time the trees are at 50% of the screen size. So I import my tree layers again and match them perfectly at the seam and assign speed and scale so it continues to move past the viewer to the left and zooms out into perspective.
And now everything goes wrong. I perfectly match the points of original tree line and the additional tree line. I see they nicely touch each other in the beginning of the movement and at the end.
However unexpectedly in the middle they start to overlap each other and move slightly faster. For example: Left end of second forest line touches the right end of first forest line at the beginning at 10 sec and touches it the same at the end at 20 sec. However at 15 sec it speeds up and jumps ahead the right end of the first forest line. I tried to fix it by making a key frame at 15 sec and aligning them again. It resulted it two smaller jumps at 12.5sec and 17.5sec. If I keep on keying between the frames the left end of the second forest line continues to make little jumps in between. If I try to adjust the zoom out part it again messes everything up. I did set up my anchor point to the left side of layer.
I thought the problem is with Scale, so I made layer 3D and started to reduce a Z dimension but got the same result. The layers jump on each other and it does not seem as one continuous movement.
POTENTIAL PROBLEM: I did assign Easy Ease, Ease In an Ease Out, so my acceleration and deceleration have nice and smooth motion. However I tried to match the speed and velocity in Key Frame options window (double click Alt on PC opens this dialog window) between the original and the additional forest lines.
I can not make this forest line long enough in a static window as I reached the width limitation of After Efffects canvas size. I need it very large as it starts at extreme close up and then zooms out to a and extreme horizon.
I can not make it a moving line and keep on patching it up as movement does not match and lines start to speed up between the key frames and overlap each other.
I though the problem was the combination of side ways right to left movement and zooming out motion (which I tried both ways: Scale in 2D layer and Z Dimension in 3D Layer) but I can not match even the linear speed of the forest lines from right to left. Perhaps there is a problem with how I am trying to match it.
I will even rebuild the entire project if someone can list steps how to make one continuous line of patched up elements in sync, so they seem as one continuous image line.

Hard to really grasp the situation without a few screen grabs, but some general thoughts:
If all your elements are vector art from Illustrator, scale shouldn't be a factor. Set your Illustrator layers to Continuously Rasterize, and you can move as close as you like to the layers with the camera and they will still be sharp. Thus, you can work at an overall smaller scale, and not go beyond AE's 30000 pixel limitation. Which also means you won't need to frame-match two environments.
It sounds to me like you are overcomplicating the job. Personally, I wouldn't combine camera movements and zooms - the potential that varied focal lengths will upset something is too great. I'd just do everything with camera movement, using the X axis for left-right movement, and the Z axis to move closer or further toward your subjects. After Effects cameras mimic the way real world cameras work, so it's best to approach the job like a real world situation. Build the world, then animate the camera moving within that world.
Remember that you can use Precomposed/Nested compositions to greatly streamline your work. Make a clump of 10 or so trees in one comp, then use that pre comp nested multiple times within your main comp. Don't forget to collapse transformations of the pre comps.

Zoom In Keyboard shortcut not working

Hi Guys,
I'm in Japan, using a US keyboard mac in English.
In FCP X, newest trial version, 10.1.1., I cannot get the keyboard shortcut to zoom in to work.
Zooming out, (command plus minus) does work. But not command&plus sign. I get a blip sound.
Any ideas? It's driving me nuts. I would appriciate any comments.
Thank you very much.
Sincerely,
Chris

Sometimes, Keyboard issues can be solved by ensuring keyboard is set to the standard defaults ...
FinalCutPro>Commands>Customise and select default.
At least you can see how the keys are mapped.
Bammers

Zoom-in keyboard shortcut not working in illustrator CC

I am able to use the keyboard shortcut control+minus to zoom out, but control+plus/= to zoom in has stopped working in illustrator CC. (It works fine in illustrator CS6.) Any idea how to fix this?

Never mind. I was using a custom key shortcut file, which apparently caused the problem. Using the Adobe default it works.

Video out to tv not working

Hello,
I just unpacked my new iPod classic and wanted to use the video out option to watch a movie from my new iPod on my TV. Somehow I can get the "TV Out" setting to say "ask" or "TV" like on my last iPod video 5.5. Does anybody know what is causing this problem or do I have to return the item? It´s a real bugger!
I also experienced the click wheel response is very, very slow!
Looking forward to reading your thoughts on this...

From what I have read, no, what you wish to do will not work. Sorry to be the bearer of bad news. I hope that it's possible for Apple to rectify this problem with a firmware update. If that's not possible (e.g. it's a hardware-based problem), they should just issue a recall of all classics, fix the hardware, and rerelease it later after the problem has been corrected.
It is unimaginable to me that Apple could have intended to invalidate monumental quantities of third-party (and even their own!) accessories for those who bought the new classics and touches and nanos. I mean, these are some of Apple's best customers: those who have purchased multiple iPods and bought into the whole accessory market too. Most companies are hesitant to burn their best customers like this, and for good reason: this kind of stuff can easily turn loyal customers into former customers, and via word-of-mouth can also turn potential customers into non-customers.

I have just updated my iPhone 4 with latest IOS 7 and now wi fi greyed out and Bluetooth not working. Tried reset, restore everything - no use. Its out of warranty too. I refuse to pay for a new phone when clearly this is an apple issue not phone issue.

Can anyone help? I updated my iPhone 4 with latest iOS 7 and now wi fi is greyed out, Bluetooth won't work and tbh am so angry! Phone now out of warranty so apple won't help without it costing me. Don't want to pay as its an apple problem not phone problem. It worked ok before. Tried everything, even clearing it down. Can't even back it up now unless I connect to a pc!

I have not had wifi since November when I upgraded to the newest IOS version. I called the Apple help line and they told me some things to do and I tried them all and they worked for a few hours and then wifi shut off again. I kept doing what they told me and it worked for a couple more days and then I could never turn it on again. My blue tooth doesn't work either. I had to actually increase my data usage with AT&T becuase of this. When I did that in December I went to the Apple store and was told that it is a hardware issue and since my phone is out of warranty I would have to pay for a new phone because they could not fix the issue. My upgrade isn't up until June 2014 so not only do I have to wait for the upgrade and I am not paying for a new phone but I have to pay $10 plus extra a month on my cell phone bill because I was going over on my Data!!! I have been beyond upset about this and Apple is not doing anything about this nor did they offer up some way to resolve the issue because obviously it is not just some rare incident if several people are having this issue. Who knows how many people out there have had this issue and have not said anything about it. Now there is a newer update that I can't do because it requires wifi in order to download.
June can not get here fast enough and I may not go back to Iphone after dealing with this for so long with no help from Apple.

Optical Out 5.1 not working

Optical Out 5. not working?Hi everyone.
I have a Sound Blaster X-Fi Xtreme Audio PCI Express card on a windows XP SP3 PC.
I connected the optical OUT to a Sony 5. Home Theather system, DTS and Dolby Digital capable.
When I configure the creative console to output 5. channels, and use the tone or channel tests, I can only hear the front left and front right channels, the others make no sound. My receiver says it's receiving a 2.0 signal, but If I listen to stereo music files or movies, the sound comes out wrong, with low volume and a weird metallic sound. If I set the console to 2., this problem disapears.
Using powerDVD with a 5. DVD, and setting it's options to SPDIF passthrough, the sound it's a perfect 5..
The same happens with Mediaplayer classic using the AC3Filters, and configuring the filter for SPDIF passthrough.
The problem is that the Creative Console doesn't let me choose SPDIF passthrough, I don't have the Digital I/O icon that the help describes and I don't have the mode switcher (it's fixed on Entertainment mode).
What am I doing wrong?
thanks everyone and excuse my broken English.

Re: Optical Out 5. not working
Sorry, I mistook your card for another model. There is no option to select SPDIF passthrough. The Digital Out for this card is always on.
Please note that optical cable will only carry pcm stereo or compressed bit stream AC3, dts. That's the reason you are getting stereo when stereo music files. How many channels you get when playing movies depends on how the movie is encoded too.
I am not sure what is that weird metallic sound, it would be advisable to contact Customer Support to see if they can help you on this.
Sorry, I mistook your card for another model. You are right, there is no option to select SPDIF passthrough. There is no need to, because the Digital Out for this card is always on. Based on your posting, your Home Theater System is already doing the decoding. Please note that optical cable will only carry pcm stereo or compressed bit stream AC3, DTS.
That's the reason you are getting stereo when playing music files. Whether you are getting surround or stereo channels when playing movies depends on how the movie is encoded too. I am not sure about that weird metallic sound, it would be advisable to contact Customer Support to see if they can help you on this.

JDK 1.6_07 with Windows: System.out.flush() does not work...

I wonder if this is a known issue: Since I upgrade the jdk1.6 version to the _07 pack, text IO does not work anymore with WinXP cmd.exe window. Assuming a static import of System.out, I use:
static void prompt()
out.print(pr); //pr is a prompt string...
out.flush();
}works as usual with Unix/Linux, but with windows nothing will be written to the terminal, until I make at least one input. In that case a barrage of cached prompts appear all at once.
Do we have a bug for it, can we work around somehow?
Thomas

Since this code works correctly in Java 6u10 on Windows XP
System.out.print("This is the data");
System.out.flush();You are apparently doing something unusual or wrong. What is "out"?
Show a small sample program that compiles and exhibits the problem when executed.

OS X 10.6.6-gestures for pinch to zoom or expand do not work.

Just installed Firefox 4 RC 1 and noticed that the pinch to open or close (zoom/expand) do not work. I can use other gestures (like swiping three fingers to move back or forward, but no luck with the pinch to zoom or expand. Keyboard shortcuts for this function work fine (command +/-).

Funcionó para mi
It worked for me

Aperture 3.4.1 Zoom out at 25% not working

Similar Messages

Maybe you are looking for