Aperture 3.4.4, Digital camera raw 4.0.5 cannot be installed

On my late 2007 Imac I run OSX 10.8.3 and Aperture 3.4.4. While installing Digital Camera Raw 4.05 I get the message Aperture version 3.4 or later, or iPhoto version 9.4 or later, is required to install this update after which the installation aborts.
I still had iPhoto 7.1.5 on my machine which I haven't used since 2008 which I decided to delete, but that did not help.
IMO the install programm should just work as it says you need either the correct Aperture OR iPhoto version, not both .
But anyway, what can I do to enable the update to work without doing a clean install of ML or buying a product I never use? Is there still some kind of iPhoto residu?
BTW, the last version of DCR I tried to install was 4.0.2. This had the same issue, but I let go of that one. I don't know what my current version is.
Kind regards,
Martin

I have all my Photo applications including Aperture in a separate map
The subfolder explains it. That is a problem in Lion and Mt. Lion. These operating systems rely on the applications being installed directly in the Applications folder.
However, you could  group your applications by creating folders in the Launchpad. Simply dragging the applications in the Lauchpad on top of each other will create subfolders there and you can see them all grouped there and launch them after double clicking the folder. That is Lion's and Mt. Lion's way to launch applications from folders.
These screenshots show my folders for Photography apps and Music applications. Double clicking reveals the folder contents for launching.

Similar Messages

  • How to to uninstall Digital Camera Raw Compatibility Update? After I install this update, the computer rans slow.

    I tried to reinstall OS X... it took a whole night to do that, but all updates are still there... please help ;o)

    I tried to reinstall OS X... it took a whole night to do that, but all updates are still there... please help ;o)

  • I installed update for OS X Mavericks 10.9.5, I Tunes 11.4, and Digital Camera RAW 5.07 shows as being installed but they all still show as updates available

    Installed update for OS X Maverick 10.9.5 and shows as being installed but also still shows as an available update in Apple store

    Kernel Panics today:
    Kernel Extensions in backtrace:
             com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7fabb77000->0xffffff7fabbc2fff
                dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7fa bb2b000
                dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7fab b72000
    Kernel Extensions in backtrace:
             com.apple.filesystems.smbfs(2.0.2)[E043DE0F-9336-3C61-9C82-F029B430A3EB]@0xffff ff7f85e2c000->0xffffff7f85e77fff
                dependency: com.apple.kec.corecrypto(1.0)[DB137B94-65D2-32AF-B5BC-80A360E104C3]@0xffffff7f8 3f2b000
                dependency: com.apple.kext.triggers(1.0)[A7018A2E-1C0C-37B8-9382-67786A396EAF]@0xffffff7f83 f72000
    BSD process name corresponding to current thread: Finder
    Mac OS version:
    13E28

  • Can't Install Digital Camera Raw 3.6

    I am having problems installing Digital Camera Raw 3.6. During the install, I get the message "Digital Camera Raw Compatibility Update can't be installed on this disk. This update provides support for Aperture 3 and iPhoto 9 only".
    I purchased Aperture 3 from the Mac App store. In Aperture 3, Digital Camera Raw 3.4 is installed. Software Update does not recognize Digital Camera Raw needs to updated. Help!

    Ernie.......yes, the application is Aperture, Mac's photo-image software. I didn't specify as I thought I was posting in the Aperture Forum. I'm not very familiar with these forums, did I miss a step in clarifying my subject?
    Don

  • Digital Camera RAW Compatibility 6, Nikon NEF, ICloud & QuickView issue

    Since a few weeks (maybe more) it appeared to me that my Nikon D7000 Raw Files went as plain black pictures on my IOS devices (Iphone or Apple TV running latests IOS releases).
    Summary of the situation
    Camera to Aperture => Fine
    Aperture to ICloud photostream => ko
    After some tests based on the discussion bellow
    RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)
    it came clear to me that the key issue is related to Digital Camera Raw Update Compatibility Update 6. I made some tests using QuickView, iMessage & Aperture :
    Test 1 : uninstall  Digital Camera Raw Update Compatibility 6 and install version 5.07
    Aperture => non supported format
    QuickView (space bar) on NEF file => fine
    Sent to my IPhone using IMessage => fine
    Test 2 : reinstall 6.0.3
    Aperture => fine
    QuickView => plain black (after a time, I think QuickView is using first the camera preview before decoding RAW data)
    Sent to my IPhone using IMessage => plain black
    Did someone experienced the same ? Any solution ???
    Kind regards,
    Jé

    Dear Torreypines,,
    thanks for your reply. However I quoted the discussion "RAW files suddenly show up as "not supported" (Aperture 3.5.1, OS X 10.10)" to illustrate my test method (uninstall and install an older Digital Camera Raw Update Compatibility).
    I do run the latests Aperture Update (updated directly from the Mac App Store).
    To illustrate, here is a screenshot of an IMessage discussion.
    Action : drag and drop a Nikon D7000 NEF file to the discussion and send it to an IPhone
    - Test 1 : Yosemite, Aperture, Digital Camera Raw... up to date => plain black
    - Test 2 : Older (5.07) Digital Camera Raw => picture ok (unfortunately, Aperture ko)
    This illustrate also what appends into ICloud. All NEF files uploaded since a few weeks are plain black into photostream on IOS Devices (Iphone and Apple TV).
    Kind regards,
    Jérôme

  • Epson r2400 Driver Loses Functionality after Installing Digital Camera Raw

    I have four Macs at home and two printers. After installing Digital Camera RAW Compatibility Update 2.0 from software update on my Mac Pro and MacBook Pro, the Epson r2400 printer driver no longer works. I can barely get a print out of Aperture and/or Photoshop, however, Pages will output to the r2400 no problem. When I try to print with the other Mac Pro that has not been updated, I can print without issue. I can print from both machines to my kyocera mita printer within aperture and photoshop.
    All of these computers are running 10.5.2. The only difference being the most recent Digital Camera RAW Compatibility Update 2.0 is installed on the two machines that no longer work with my Epson r2400.
    I have uninstalled the print drivers and reinstalled. Changed the connection to the computers and tested everything that has worked in the past. I consider myself pretty good at troubleshooting, but this is beyond my grasp.
    I need to print right away from all these computers, so does anyone know how to "roll back" an update? I am not running Time Machine, but that may change very, very soon. Please help...

    I'm working off a 750 GB hard drive, not so simple to clone even via firewire. I guess I made a serious mistake by trusting the apple update process...I see they have a new update today. I may try that to see if fixes the problem before I buckle to the original system disk installation process. If the install is already burned, it couldn't hurt to throw some gasoline on it, right?

  • Digital Camera RAW Compatibility Update 4.01 for Aperture 3 and iPhoto '11

    Check Software Update!
    Canon EOS M
    Canon PowerShot S110
    Nikon D600
    Sony Cyber-shot DSC-RX100
    Canon PowerShot G15
    Canon PowerShot SX50 HS
    Nikon 1 J2
    Panasonic LUMIX DMC-FZ200
    Panasonic LUMIX DMC-G5
    Panasonic LUMIX DMC-LX7
    Sony Alpha NEX-F3
    Those of you who have already imported "unsupported" photos into Aperture (i.e. Nikon D600) photos, simply choose Photos->Reprocess Original after installing this update (and restarting Aperture), and the photo will then show up.
    Aperture Expert has a little summary too:
    http://www.apertureexpert.com/tips/2012/10/24/digital-camera-raw-compatibility-u pdate-401-for-aperture-3-a.html

    I cannot fathom why a RAW update is not compatible with all versions of Aperture 3. This is forced redundancy in my opinion. Not happy...
    I understand that this is annoying for you, but it is part of the redesign of MacOS to make it more efficient and not to waste disk space on redundant installations.
    The recent raw update - as I see it - is an update to Mac OS X 10.8.x, not to Aperture. Since Mac OS X Lion Apple has started to migrate the raw support directly to the OS, so they do not need to install the raw support as update to many different applications. I have not checked yet - is this update included in Lion as well? I sincerely hope so.
    Send feedback to Apple that you need this upgraded raw support also available in Snow Leopard.
    http://www.apple.com/feedback/aperture.html
    Léonie

  • Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

    Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
    Please - any help would be very gratefully received

    That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
    A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
    Message was edited by: Ailish Eklof

  • Installed digital camera raw update 3.8, but Aperture doesn't recognize Oly E-P3 raw files

    I was excited to see that the digital camera raw compatibility update 3.8 purported to provide support for Olympus E-P3 raw files. I installed it from Software Update, and Aperture 3.1.3 (OSX 10.6.8) still showed the raw files as "unsupported". I restarted my Mac, got the same result. I downloaded and installed the standalone update, and again got the same result. Has anyone else had success with the update?

    I found a solution. My E–P3 raw files still showed up as “unsupported” after reinstalling the update from the standalone updater. I discovered that selecting one of the “unsupported” raw files and having Aperture reprocess it (even though it had never been processed at all) made the file recognizable by Aperture and allowed me to make adjustments to it. I then reprocessed all of my E–P3 raw files and the only problem I have noted is that the vertical files were not auto rotated.
    In reprocessing the raw files, I selected "only photos without adjustments" and "reprocess existing images". I hope this helps anyone who experienced this problem.

  • Since Digital Camera RAW Compatibility Update 4.03 Aperture no longer supports by 20D CR2 images. Is this a known problem? And when it going to be fixed?

    Has anyone else run into this problem since the update?

    The Raw support for Canaon EOS 20D is built directly into the Mac OS X, since Mac OS X Lion, see:
    OS X Lion: Supported digital camera RAW formats: http://support.apple.com/kb/HT4757
    OS X Mountain Lion: Supported digital camera RAW formats: http://support.apple.com/kb/HT5371
    This is independent of Aperture. What is the problem? Do you get "unsupported image format" error messages?
    Regards
    Léonie

  • Aperture Expert is reporting that Digital Camera RAW 4.0.5 supporting Fuji sensors is out...

    It should be available via Software Update.
    http://www.apertureexpert.com/tips/2013/4/17/digital-camera-raw-update-405-for-a perture-and-iphoto-fujifi.html
    New cameras supported:
    Fujifilm X20
    Fujifilm X100S
    Fujifilm X-E1
    Fujifilm X-Pro1
    I would expect it would also be available for download here:
    http://support.apple.com/downloads/
    But isn't there yet.  I guess there may be numerous fewer threads here related to Fuji now ;-)

    The Mountain Lion raw support article also lists the update already - I had to remember to clear the Browser Cache to see it
    http://support.apple.com/kb/HT5371
    And it was available at the AppStore for download more than an hour ago, but grouped with the pre-release software update, even if the update itself was not marked as pre-release seed.

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • Digital Camera Raw update 4.02

    is out in software update. I don;t see it on the Apple site yet however.
    This from software update

    Discovered that the problem exists only with E-PM2 RAW files imported into Aperture before applying Digital Camera Raw Update 4.02. (I had been shooting RAW+JPEG since getting the camera, while waiting for RAW support.
    Found a solution:
    Select all the problem files. Choose "Reprocess Originals" from the Photos menu. Done.

  • Digital Camera Raw Update

    TUAW reports there's a new update to support more digital cameras. I didn't see a thread here, so I thought I'd share in case some of you were waiting for support.
    Apple has released Digital Camera Raw Compatibility Update 3.1 via Software Update. The update can also be downloaded here. The 6.77 MB (web) or 7.2 MB (Software Update) update requires Mac OS X 10.5.8 or 10.6.2, and extends RAW image compatibility for Aperture 3 and iPhoto '09 for the following cameras:
    o. Hasselblad H3DII-50
    o. Leica M9
    o. Leica X1
    o. Olympus E-P1
    o. Olympus E-P2
    o. Panasonic Lumix DMC-GF1
    o. Pentax K-7
    o. Pentax K-x
    o. Sony Alpha DSLR-A500
    o. Sony Alpha DSLR-A550
    o. Sony Alpha DSLR-A850

    I am running Aperture 2, and iPhoto 09, with a Pentax Kx.
    Either the 3.1 update, or the ProKit upgrade, killed reading of my DNG files in Aperture.
    Although Software Update shows them as recommended for iPhoto 9 and Aperture users, I would suggest passing on them if you are still in Aperture 2.

  • Now available: Digital Camera RAW Compatibility 4.0.6

    http://support.apple.com/kb/DL1656
    Digital Camera RAW Compatibility Update 4.06
    This update adds RAW image compatibility for the following cameras to Aperture 3 and iPhoto '11:
              Canon EOS-1D C
              Canon EOS Rebel SL1 / 100D / Kiss X7
              Canon EOS Rebel T5i / 700D / Kiss X7i
              Hasselblad Lunar
              Nikon COOLPIX A
              Nikon D7100
              Nikon 1 J3
              Nikon 1 S1
              Sony Alpha NEX-3N

    Nah.  There will be a new camera announced in the next week and it will again be a crisis that Apple is not professional because they take more than 4 days to support a new camera
    What about a camera released a year ago? Should I get at least a bit upset fo the lack of support? Hope wit will come out soon.
    Raf

Maybe you are looking for

  • Photo keep crashing

    Good evening  everybody, I updated  my mac and started to use photo after migration of my library During the migration they were a little problem because I didn't have enough storage, I just deleted couple of movies and i could finish the migration A

  • How do i convert a voice memo into MP3 with itunes 12?

    I need to convert a voice memo into MP3 with itunes 12.

  • Hide folders path in browser view

    I need some help. Example: I have a domain called www.qwerty.com. In dreamweaver I created a site and have the index.cfm in root. Then I have a folder called Pages en in that folder another folder called login and in that folder the login.cfm. In de

  • How to create and manage the log file

    Hi, I want to trace and debug the program process. I write the code for creating log file and debugging the process. But i am not able get the result. please help me how to create and manage the log file. Here i post sample program package Src; impor

  • ColdFusion / Flex Application Wizard Problem

    I can't get this to work. On the last page if I do a new project location I get: The project could no be created. Please check the webroot folder (it may overlap with an existing project). If I try to use an existing project it looks like it does a l