Aperture 3.4.5 crashes when building new Vault.

I'm using a Macbook Pro 17", and have used Aperture sucessfully since its inception. I'm using 2x 1Tb exernal HDs for my Library and Vault respectively, (nothing else on them).
Everything went well until I bought my Fuji X-Pro1 camera. Although we had to wait an eternity for compatibility, it eventually appeared. And so did the difficulties. The new version of Aperture won't run on Snow Leopard, which worked so well on my machine. So I updated to 10.8.4 to run Aperture, but of course losing Rosetta in the process. Then I installed the Aperture update, all seemed to go well, but it was unable to update Vault. No problem, I thought: delete Vault and rebuild it. So here I am with a blank 1Tb drive, new Vault setup, and a Library of around 800Gb to backup. Because I'm using a SATA card, it set off at a cracking pace, and all seemed well. Sadly not. Once it got to about 480Gb, it had slowed to a crawl, and eventually crashed. I'm totally at a loss as to what to do:, I've tried Permissions, Techtool, reformatting the drive, everything.
At present, it's been running for 36 hours and backed up 646Gb, which is further than it has got before... but I'm not holding my breath. When I look at Activity monitor, Aperture is using 1.77Gb of real memory, and an additional 2.6Gb of virtual memory. Since the machine is maxed out at 4Gb, I can't see why the program is using so much RAM, when it is basically just copying files.
As a professional photographer who works every day and wants to save my changes to Vault every day, this just isn't acceptable. I can use the clone feature in Techtool, but that's hardly the point, is it? Why clone an entire 800Gb, when I've shot two pictures and adjusted three others? Not exactly good for my business.
Any realistic help would be much appreciated.

Your error log does not help much - Aperture is not crashing, it is hanging. Waiting for an event that does not happen.
Has the vault that you cannot update been created by the same Aperture version? Is it a new vault, or a vault that could be updated before? Where is your vault located? What kind of drive (external? NAS?) And what kind of formatting?
As a test - can you create and update a vault for a new test Aperture library?
I hope somebody will jump in who can read hang reports. Crash reports are easier to read.
Regards
Léonie

Similar Messages

Crashes when building previews

LR keeps crashing when I try to rebuild previews. I had an issue before where I didn't see any thumbnails in the "all photographs" view, and to fix that I created a new catalog. I was able to rebuild previews for several external discs, but one disc kept crashing LR. So I installed that disc internally in my Mac Pro. Still kept crashing on build previews. Then I transferred all the files to a brand new hard drive, still inside my Mac. Whenver I rebuild the previews, the scan completes, and then I get the spinning beach ball, and then crash.
I do have a bunch of crash reports if that helps.
I'm running LR 2.7 on a Mac Pro with OSX 10.6.3. 5GB memory. I've repaired disk permissions on startup disk, and ran DiskWarrior on startup disk as well as the discs that house my photos. I've also run Techtool. In the past I've had issues with LR crashing when building Web galleries.
I would really appreciate suggestions--I've been wresting with this for days and it's very frustrating. Thanks!

More trouble: there's a catalog I can't import. I keep getting an "unkown error." And when I start the import, I'm getting strange previews with backwards text (I'm pretty sure it's instructing me to take hallucinogenic drugs) see below.

Aperture 3.4.3 crashes when uploading photo to facebook

Aperture 3.4.3 crashes when uploading photo to facebook. I have tried for 2 days to uploade 3 photos. The 1 photo will appear on Facebook then aperture crashes. This is a new problem.
Any help would be appreciated

Can you post the full crash log? Does it occur with a new libray?

SSMS crash when creating new database diagram

For several years I have been unable to create database diagrams from within SSMS. I have tried every combination of VS2005, VS2008, VS2012 and VS2013 with every combination of SQL2005, SQL2008, SQL2012 and SQL2014.
I have installed, uninstalled, and repaired many dozens of times. I am currently using VS2013 ultimate with SQL2014 express.
I have tried every related 'workaround' that I can find on the internet. Still the problem persists.
Any help would be deeply appreciated.
Here are the relevant details with file versions:
In SSMS, I right-click on a database and choose New Database Diagram. A Blank diagram window appears with the SSMS error dialog:
===================================
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Microsoft.VisualStudio.OLE.Interop)
Program Location:
   at Microsoft.VisualStudio.OLE.Interop.IOleCommandTarget.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.DocumentObjectSite.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.QueryStatus(Guid& pguidCmdGroup, UInt32 cCmds, OLECMD[] prgCmds, IntPtr pCmdText)
   at Microsoft.Internal.VisualStudio.Shell.Interop.IVsTrackSelectionExPrivate.Register()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConnectSelectionContext()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Activate()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowManagerService.viewManager_ActiveViewChanged(Object sender, ActiveViewChangedEventArgs e)
   at System.EventHandler`1.Invoke(Object sender, TEventArgs e)
   at Microsoft.VisualStudio.PlatformUI.ExtensionMethods.RaiseEvent[TEventArgs](EventHandler`1 eventHandler, Object source, TEventArgs args)
   at Microsoft.VisualStudio.PlatformUI.Shell.ViewManager.SetActiveView(View view, ActivationType type)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ShowInternal(ShowFlags showFlags)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.<Show>b__26()
   at Microsoft.VisualStudio.ErrorHandler.CallWithCOMConvention(Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.Show()
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.<Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show>b__7a()
   at Microsoft.VisualStudio.Shell.ThreadHelper.Invoke[TResult](Func`1 method)
   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.MarshalingWindowFrame.Microsoft.VisualStudio.Shell.Interop.IVsWindowFrame.Show()
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VirtualProject.Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection
con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.ISqlVirtualProject.CreateDesigner(Urn origUrn, DocumentType editorType, DocumentOptions aeOptions, IManagedConnection con, String fileName)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.CreateDesignerWindow(IManagedConnection mc, DocumentOptions options)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.InvokeDesigner(IManagedConnection connection)
   at Microsoft.SqlServer.Management.UI.VSIntegration.Editors.VsDocumentMenuItem.Invoke()
   at Microsoft.SqlServer.Management.UI.VSIntegration.ObjectExplorer.ToolsMenuItemBase.MenuInvokedHandler(Object sender, EventArgs args)
Version info taken from Sql Server Management Studio/Help/About dialog:
Microsoft SQL Server Management Studio      12.0.2000.8
Microsoft Analysis Services Client Tools    12.0.2000.8
Microsoft Data Access Components (MDAC)     6.1.7601.17514
Microsoft MSXML                             3.0 4.0 5.0 6.0
Microsoft Internet Explorer                 9.11.9600.17358
Microsoft .NET Framework                    4.0.30319.18444
Operating System                            6.1.7601
DLL versions
c:\Program Files(x86)\Common Files\microsoft shared\Visual Database Tools
dsref80.dll version 12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8
msdds.dll    12.0.21005.1
msddsf.dll   12.0.21005.1
msddslm.dll 12.0.21005.1
msdds.mp.dll 12.0.21005.1
msddsp.dll   12.0.21005.1
c:\Program Files(x86)\Common Files\microsoft shared\MSDesigners8\Resources\1033
msddsui.dll 12.0.21005.1

Hello,
There is a Connect item related to this issue. This is the link of that Connect item:
https://connect.microsoft.com/SQLServer/feedback/details/730985/smss-crashes-when-creating-new-database-diagram
Try the workarounds posted there (Workarounds section).
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Aperture 3.5 repeatedly crashes when cropping or editing.   10.9.4 on a 24" iMac early 2009 Processor 3.06 GHz Intel Core 2 Duo. Crash report: Processor 3.06 GHz Intel Core 2 Duo

Aperture 3.5 repeatedly crashes when cropping or editing.   10.9.4 on a 24" iMac early 2009 Processor 3.06 GHz Intel Core 2 Duo. Crash report: Processor 3.06 GHz Intel Core 2 Duo.    Able to edit 3 or 4 photos before crashing again.   Repair run multiple times.   Can't copy/paste crash report -
any ideas?

Yes.   Just updated to 10.9.5 and 3.5.1 and crashed again.    Only half of available memory on computer is being used.
How do I copy the "problem report"?
thanks very much

Full server pool crashes when adding new iSCSI server

Hi,
we have a Pool Group with 2 machines (1 Server Pool Master + Server Virtual Machine + Utility Server and another 1 Server Virtual Machine). Both have a iSCSI Shared Disk which builds /OVS partition.
This is working, we can use High Availability, Migrate guests etc.
But when adding new Server Virtual Machines to the pool (with guests running), current machines in the Pools get restarted.
My question is, can server virtual machines be "hot added" to the pool group while guests are running?
Thanks and regards,
Marc

Hi,
hosts file seems to be correct.
Messages logs during the crash time are the following:
Node vmserver15 = Server Pool Master, Utility Master and Server Virtual Machine
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: device vif6.0 left promiscuous mode
Dec 10 12:40:02 vmserver15 kernel: type=1700 audit(1260445202.434:16): dev=vif6.0 prom=0 old_prom=256 auid=4294967295 ses=4294967295
Dec 10 12:40:02 vmserver15 kernel: vlan500: port 3(vif6.0) entering disabled state
Dec 10 12:40:02 vmserver15 kernel: loop10: dropped 10114 extents
Dec 10 12:40:03 vmserver15 udhcpc: udhcp client (v0.9.8) started
Dec 10 12:40:03 vmserver15 udhcpc: Lease of 193.109.175.25 obtained, lease time 172800
Dec 10 12:40:04 vmserver15 kernel: device vif7.0 entered promiscuous mode
Dec 10 12:40:04 vmserver15 kernel: type=1700 audit(1260445204.774:17): dev=vif7.0 prom=256 old_prom=0 auid=4294967295 ses=4294967295
Dec 10 12:40:04 vmserver15 kernel: vlan500: topology change detected, propagating
Dec 10 12:40:04 vmserver15 kernel: vlan500: port 3(vif7.0) entering forwarding state
Dec 10 12:40:05 vmserver15 kernel: loop10: fast redirect
Dec 10 12:40:06 vmserver15 kernel: blkback: ring-ref 770, event-channel 9, protocol 1 (x86_32-abi)
Dec 10 12:53:35 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:36 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:37 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:38 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:50 vmserver15 last message repeated 6 times
Dec 10 12:53:51 vmserver15 kernel: o2net: no longer connected to node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:52 vmserver15 kernel: (4989,0):o2hb_do_disk_heartbeat:776 ERROR: Device "sdb1": another node is heartbeating in our slot!
Dec 10 12:53:53 vmserver15 kernel: o2net: accepted connection from node vmserver10.pic.es (num 1) at 193.109.174.110:7777
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_atime:2193 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_read:2434 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_write_begin:1845 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:53 vmserver15 kernel: (5638,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlm_send_remote_convert_request:393 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000000020744c1370e: bad lockid+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_inode_lock_full:2064 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_suballoc_bits:449 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_cluster_bitmap_bits:682 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_reserve_for_window:930 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_local_alloc_slide_window:1063 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_reserve_local_alloc_bits:537 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_reserve_clusters:725 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_lock_allocators:677 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin_nolock:1751 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_write_begin:1861 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):ocfs2_file_buffered_write:2016 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: (7923,0):__ocfs2_file_aio_write:2173 ERROR: status = -22+
Dec 10 12:53:58 vmserver15 kernel: loop: Write error at byte offset 37644512256, length 4096.+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:29 vmserver15 kernel: (5638,3):dlmconvert_remote:327 ERROR: dlm status = DLM_IVLOCKID
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_cluster_lock:1206 ERROR: DLM error DLM_IVLOCKID while calling dlmlock on resource M000000000000000001050c00000000: bad lockid
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_inode_lock_full:2064 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_write_begin:1845 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):ocfs2_file_buffered_write:2016 ERROR: status = -22
Dec 10 12:58:29 vmserver15 kernel: (5638,3):__ocfs2_file_aio_write:2173 ERROR: status = -22
Dec 10 13:01:16 vmserver15 syslogd 1.4.1: restart.
Node vmserver10: Virtual Server Machine
Dec 10 12:53:35 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:35 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 12:53:35 vmserver10 kernel: (20996,0):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:M000000000000000000022044c1370e: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:36 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 12:53:36 vmserver10 kernel: (20996,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 12:53:37 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:844 ovm:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_get_lock_resource:878 ovm: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 12:53:38 vmserver10 kernel: (8672,1):dlm_do_recovery:524 (8672) Node 1 is the Recovery Master for the Dead Node 0 for Domain ovm
Dec 10 12:53:40 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 12:53:51 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:53:53 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:53:53 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:53:53 vmserver10 kernel:   last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:53:53 vmserver10 kernel:   on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:53:53 vmserver10 kernel:   inflight locks: 0, asts reserved: 0+
*Dec 10 12:53:53 vmserver10 kernel:   refmap nodes: [ ], inflight=0*+
Dec 10 12:53:53 vmserver10 kernel:   granted queue:+
Dec 10 12:53:53 vmserver10 kernel:     type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:53:53 vmserver10 kernel:   converting queue:+
Dec 10 12:53:53 vmserver10 kernel:   blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:57:18 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:57:18 vmserver10 kernel: (3761,0):dlm_convert_lock_handler:489 ERROR: did not find lock to convert on grant queue! cookie=0:92+
Dec 10 12:57:18 vmserver10 kernel: lockres: M000000000000000001050c0000000, owner=1, state=0+
Dec 10 12:57:18 vmserver10 kernel:   last used: 0, refcnt: 3, on purge list: no+
Dec 10 12:57:18 vmserver10 kernel:   on dirty list: no, on reco list: no, migrating pending: no+
Dec 10 12:57:18 vmserver10 kernel:   inflight locks: 0, asts reserved: 0+
*Dec 10 12:57:18 vmserver10 kernel:   refmap nodes: [ ], inflight=0*+
Dec 10 12:57:18 vmserver10 kernel:   granted queue:+
Dec 10 12:57:18 vmserver10 kernel:     type=5, conv=-1, node=1, cookie=1:243, ref=2, ast=(empty=y,pend=n), bast=(empty=y,pend=n), pending=(conv=n,lock=n,cancel=n,unlock=n)+
Dec 10 12:57:18 vmserver10 kernel:   converting queue:+
Dec 10 12:57:18 vmserver10 kernel:   blocked queue:+
. <the above bold and cursive text is repetead few times>
Dec 10 12:58:32 vmserver10 kernel: (3761,0):dlm_unlock_lock_handler:511 ERROR: failed to find lock to unlock! cookie=0:1849
Dec 10 12:58:33 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 12:59:02 vmserver10 kernel: o2net: connection to node vmserver15.pic.es (num 0) at 193.109.174.115:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 12:59:02 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260446312.830107 now 1260446342.828243 dr 1260446312.830066 adv 1260446312.830319:1260446312.830320 func (b9f5fd13:506) 1260446312.830109:1260446312.830303)
Dec 10 12:59:02 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 12:59:32 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 0 after 30.0 seconds, giving up and returning errors.
Dec 10 13:01:42 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:45 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1
Dec 10 13:01:51 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:01:56 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:09:05 vmserver10 modprobe: FATAL: Module ocfs2_stackglue not found.
Dec 10 13:16:45 vmserver10 kernel: o2net: connection to node vmserver16.pic.es (num 2) at 193.109.174.116:7777 has been idle for 30.0 seconds, shutting it down.
Dec 10 13:16:45 vmserver10 kernel: (0,0):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1260447375.655426 now 1260447405.655712 dr 1260447375.655413 adv 1260447375.655427:1260447375.655427 func (b9f5fd13:503) 1260446516.75600:1260446516.75608)
Dec 10 13:16:45 vmserver10 kernel: o2net: no longer connected to node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:17:15 vmserver10 kernel: (3761,0):o2net_connect_expired:1664 ERROR: no connection established with node 2 after 30.0 seconds, giving up and returning errors.
Dec 10 13:17:19 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:17:20 vmserver10 kernel: (3761,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 2
Dec 10 13:29:05 vmserver10 kernel: o2net: no longer connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:29:05 vmserver10 kernel: (5029,0):ocfs2_dlm_eviction_cb:98 device (8,17): dlm has evicted node 0
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:844 E3FE9E5767CA457FA697980EB637E93B:$RECOVERY: at least one node (0) to recover before lock mastery can begin
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_get_lock_resource:878 E3FE9E5767CA457FA697980EB637E93B: recovery map is not empty, but must master $RECOVERY lock now
Dec 10 13:29:06 vmserver10 kernel: (5344,4):dlm_do_recovery:524 (5344) Node 1 is the Recovery Master for the Dead Node 0 for Domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:06 vmserver10 kernel: (28412,0):ocfs2_replay_journal:1183 Recovering node 0 from slot 0 on device (8,17)
Dec 10 13:29:09 vmserver10 kernel: kjournald starting. Commit interval 5 seconds
Dec 10 13:29:16 vmserver10 kernel: o2net: accepted connection from node vmserver16.pic.es (num 2) at 193.109.174.116:7777
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Node 2 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:29:20 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 1 2
Dec 10 13:32:08 vmserver10 kernel: o2net: connected to node vmserver15.pic.es (num 0) at 193.109.174.115:7777
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Node 0 joins domain E3FE9E5767CA457FA697980EB637E93B
Dec 10 13:32:11 vmserver10 kernel: ocfs2_dlm: Nodes in domain ("E3FE9E5767CA457FA697980EB637E93B"): 0 1 2
Dec 10 13:36:10 vmserver10 shutdown[28681]: shutting down for system reboot+
I will investigate what seems to be going on and post it here.
Thanks for your help.
Edited by: Marc Caubet on 11-Dec-2009 02:05
Edited by: Marc Caubet on 11-Dec-2009 02:07

Aperture 2.1.4 crash when rating pictures since SL update

I seem to be having an issue with Aperture since performing the SL update. This issue seems to occur only when I'm rating pictures. Specifically, it always appears to crash when I'm either rejecting or deleting an image from the library. The crash seems to occur about 1 in 10 or 20 reject/delete operations. It's always the same thread that crashes - thread 23 (I have a large number of crash reports to prove it). I have only noticed this issue since upgrading to Snow Leopard. I've tried removing my plugins, which did not seem to fix the issue. Anyone have any experience with this problem?
Here's a snippet from the top of the most recent log:
Process: Aperture \[343]
Path: /Applications/Aperture.app/Contents/MacOS/Aperture
Identifier: com.apple.Aperture
Version: 2.1.4 (2.1.4)
Build Info: Aperture-908252102~1
Code Type: X86 (Native)
Parent Process: launchd \[92]
Date/Time: 2009-10-29 12:46:22.040 -0400
OS Version: Mac OS X 10.6.1 (10B504)
Report Version: 6
Exception Type: EXCBADACCESS (SIGBUS)
Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000004
Crashed Thread: 23
Message was edited by: beezhive

It seems to be at random. I haven't tested the same image repeatedly, but at the minimum it happens on multiple imports of images taken over multiple days.

Workshop 8.1 SP2 crashes when build webapp

Hi,
Help!
It keeps crashing when I try to build a webapp!
Anyone knows is there an error log that tells what happened?
Thanks!
Hai

Raj,
I have since rolled back to SP1.
I will try SP2 now, and see if the problem still exists.
One possible reason it might be because of ClearCase view
I used(local dynamic view).
Somehow generating a lot of files in .workshop directory
as view private files make the view corrupted.
Thanks!
Hai
"Raj Alagumalai" <[email protected]> wrote:
Hello Hai,
Did you have any of the temporary files generated by Workshop open ?
Can you
try a clean application and then build. Also can you verify that the
both
the IDE and the server are on SP2 ?
Workshop version can be obtained from Help -> About Workshop
Workshop - Version 8.1.2 (Build: 2003.1211.044125)
Server version can be obtained from the server log file or the command
window or by using the VERSION command.
http://e-docs.bea.com/wls/docs81/admin_ref/cli.html#1195067
WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284
Regards,
Raj Alagumalai
Backline Workshop Support
"Hai" <[email protected]> wrote in message news:[email protected]...
workshop_debug.txt file contains:
30 Dec 2003 12:16:44,292 WARN WLSUtil [AntTarget:build][]:Exception
getting Server and Domain info, weblogic.management.ManagementError:[Management:141113]The
management subsystem was accessed prior to its initialization.
30 Dec 2003 12:16:44,339 WARN WLSUtil [AntTarget:build][]:Unable
to
obtain server tempdir, J2EEApplicationService not available!
30 Dec 2003 12:26:28,987 WARN WLSUtil [AntTarget:build][]:Exception
getting Server and Domain info, weblogic.management.ManagementError:[Management:141113]The
management subsystem was accessed prior to its initialization.
30 Dec 2003 12:26:28,987 WARN WLSUtil [AntTarget:build][]:Unable
to
obtain server tempdir, J2EEApplicationService not available!
30 Dec 2003 12:38:17,043 WARN WLSUtil [AntTarget:build][]:Exception
getting Server and Domain info, weblogic.management.ManagementError:[Management:141113]The
management subsystem was accessed prior to its initialization.
30 Dec 2003 12:38:17,043 WARN WLSUtil [AntTarget:build][]:Unable
to
obtain server tempdir, J2EEApplicationService not available!
"Hai" <[email protected]> wrote:
Hi,
Help!
It keeps crashing when I try to build a webapp!
Anyone knows is there an error log that tells what happened?
Thanks!
Hai

Encore CS3 crashes when building to Flash (Windows)

I've built a project that has no problem burning a DVD or rendering an ISO image. However, when I try to author a Flash version of the project, it spends hours transcoding, then Encore CS3 crashes. (Generic Windows "Encore CS3 has encountered a problem and needs to close" error.) The only issue that shows up when checking the project is an orphan timeline, but it is linked into the project through playlists.
Any suggestions on how to create a flash version successfully?
Specs:
AMD Dual Core 4800+ (2.51Ghz)
2 Gigs memory
Windows XP SP3

I'm also having issues with Encore crashing all of the time. Whenever I try to build a flash file it crashes near the end. I have a few large videos in there and can build a flash file without the videos in, but why does it keep crashing when the videos are in.... I thought this is what this software is designed for!
Has anyone had any luck getting around their crashes?
To reduce the size of the videos what setting do you suggest changing?
Thanks and good luck to everyone else using Encore!
Matt.

InDesign crashes when inserting new page(s)

I have a landscape document with facing pages. The origin was an Indd CS3 document opend with CS 5 and saved. I can move pages from one location to another but the attemt to insert one or two new pages will cause indd to crash. This is not a general problem this seems only to happen with this particular doc.
indd CS5 (7.0.2) , win xp, sp 3

Ther have been reoprts of an apparent bug that causes crashes when insering pages based on masters with more than one column. If that's not your problem, try Remove minor corruption by exporting

InDesign CS5 crashes when saving new empty document.

It also crashes when printing, saving, resaving or exporting existing files. Many are converted files from Quark Xpress using Q2ID. Never had any problems until the past few weeks. Help!
I have renamed preference files and uninstalled and reinstalled five times. Still does it.

Best practice is to always export converted files to .idml immediately after the conversion, then open that and save as a new .indd. See Remove minor corruption by exporting

Aperture 1.1.2 - Crashes when importing?

My copy of Aperture, updated, crashes when I try to import (using any Import... command, and also when importing from Memory Card).
I've fixed permissions, fixed my disk, checked RAM -- all OK. Here's the error log:
PID: 427
Thread: 14
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000000
Thread 0:
0 libSystem.B.dylib 0x9fdf8268 machmsgtrap + 8
1 libSystem.B.dylib 0x9fdf81bc mach_msg + 60
2 com.apple.CoreFoundation 0x907dbb78 __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907db47c CFRunLoopRunSpecific + 268
4 com.apple.HIToolbox 0x931eb740 RunCurrentEventLoopInMode + 264
5 com.apple.HIToolbox 0x931eadd4 ReceiveNextEventCommon + 380
6 com.apple.HIToolbox 0x931eac40 BlockUntilNextEventMatchingListInMode + 96
7 com.apple.AppKit 0x93713ae4 _DPSNextEvent + 384
8 com.apple.AppKit 0x937137a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
9 com.apple.AppKit 0x9370fcec -[NSApplication run] + 472
10 com.apple.prokit 0x90020514 NSProApplicationMain + 288
11 com.apple.Aperture 0x00002ea4 0x1000 + 7844
12 com.apple.Aperture 0x00002d4c 0x1000 + 7500
Thread 1:
0 libSystem.B.dylib 0x9fe1f7ac wait4 + 12
1 com.apple.Foundation 0x92932448 _waitForTermination + 40
2 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 2:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x0035e2a4 0x1000 + 3527332
4 com.apple.Aperture 0x00150748 0x1000 + 1374024
5 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 3:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.AppKit 0x937b0708 -[NSUIHeartBeat _heartBeatThread:] + 324
4 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 4:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x000d2728 0x1000 + 857896
4 com.apple.Aperture 0x00087410 0x1000 + 549904
5 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 5:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x000c3e00 0x1000 + 798208
4 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 6:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x000c3e00 0x1000 + 798208
4 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 7:
0 libSystem.B.dylib 0x9fe3870c pread + 12
1 ...ple.CoreServices.CarbonCore 0x90bc526c BasicRead(FileRecord*, short, long long, unsigned long long*, void*, unsigned long long*) + 632
2 ...ple.CoreServices.CarbonCore 0x90bc4fa4 PBReadForkSync + 124
3 ...ple.CoreServices.CarbonCore 0x90bc4f04 FSReadFork + 52
4 com.apple.Foundation 0x929d08a8 _NSCopyForkUsingBuffer + 296
5 com.apple.Foundation 0x929d0700 _NSCopyForkedFile + 308
6 com.apple.Foundation 0x929d0328 -[NSFileManager _newReplicatePath:ref:atPath:ref:operation:fileMap:handler:] + 1944
7 com.apple.Foundation 0x929cfb7c -[NSFileManager _replicatePath:atPath:operation:fileMap:handler:] + 536
8 com.apple.Foundation 0x929cf940 -[NSFileManager copyPath:toPath:handler:] + 212
9 com.apple.Aperture 0x001209b8 0x1000 + 1178040
10 com.apple.Aperture 0x000c4568 0x1000 + 800104
11 com.apple.Aperture 0x000c3fb4 0x1000 + 798644
12 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
13 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 8:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x000c3e00 0x1000 + 798208
4 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 9:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x000c3e00 0x1000 + 798208
4 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 10:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x0035e2a4 0x1000 + 3527332
4 com.apple.Aperture 0x00066b0c 0x1000 + 416524
5 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 11:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 com.apple.Foundation 0x9294b300 -[NSConditionLock lockWhenCondition:] + 68
3 com.apple.Aperture 0x0035e2a4 0x1000 + 3527332
4 com.apple.Aperture 0x0006e94c 0x1000 + 448844
5 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 12:
0 libSystem.B.dylib 0x9fe1bfac kevent + 12
1 com.apple.DesktopServices 0x92858250 TFSNotificationTask::FSNotificationTaskProc(void*) + 56
2 ...ple.CoreServices.CarbonCore 0x90bc1900 PrivateMPEntryPoint + 76
3 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 13:
0 libSystem.B.dylib 0x9fe192e8 semaphorewait_signaltrap + 8
1 libSystem.B.dylib 0x9fe1ddcc pthreadcondwait + 480
2 ...ple.CoreServices.CarbonCore 0x90bc1af0 MPWaitOnQueue + 224
3 com.apple.DesktopServices 0x928588cc TNodeSyncTask::SyncTaskProc(void*) + 116
4 ...ple.CoreServices.CarbonCore 0x90bc1900 PrivateMPEntryPoint + 76
5 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 14 Crashed:
0 com.apple.Aperture 0x00009e6c 0x1000 + 36460
1 com.apple.Aperture 0x000c7034 0x1000 + 811060
2 com.apple.Foundation 0x9295ee5c +[NSException raise:format:] + 40
3 com.apple.Foundation 0x929475a4 -[NSCFSet addObject:] + 120
4 com.apple.Aperture 0x0025ea74 0x1000 + 2480756
5 com.apple.Aperture 0x0025d728 0x1000 + 2475816
6 com.apple.Aperture 0x00265fa8 0x1000 + 2510760
7 com.apple.CoreData 0x9410398c -[NSManagedObject(_NSInternalMethods) _maintainInverseNamed:isToMany:ofRelationshipNamed:forChange:onSet:] + 144
8 com.apple.CoreData 0x94103ce8 -[NSManagedObject(_NSInternalMethods) _didChangeValue:forRelationship:named:withInverse:] + 652
9 com.apple.Foundation 0x929fe648 -[NSObject(NSKeyValueObserverNotification) didChangeValueForKey:withSetMutation:usingObjects:] + 696
10 com.apple.CoreData 0x941022cc -[NSManagedObject didChangeValueForKey:withSetMutation:usingObjects:] + 76
11 com.apple.Aperture 0x0015bf0c 0x1000 + 1421068
12 com.apple.CoreData 0x94126c14 -[_NSProxyWrapperMutableSet addObject:] + 52
13 com.apple.Aperture 0x00261fa4 0x1000 + 2494372
14 com.apple.Aperture 0x00259328 0x1000 + 2458408
15 com.apple.Aperture 0x0025910c 0x1000 + 2457868
16 com.apple.Aperture 0x0011cfc4 0x1000 + 1163204
17 com.apple.Aperture 0x0011e520 0x1000 + 1168672
18 com.apple.Aperture 0x0011f4bc 0x1000 + 1172668
19 com.apple.Foundation 0x92944194 forkThreadForFunction + 108
20 libSystem.B.dylib 0x9fe18c28 pthreadbody + 96
Thread 14 crashed with PPC Thread State 64:
srr0: 0x0000000000009e6c srr1: 0x000000000200f030 vrsave: 0x0000000000000000
cr: 0x24000444 xer: 0x0000000000000007 lr: 0x0000000000009e60 ctr: 0x0000000092921264
r0: 0x000000009295f0c0 r1: 0x00000000f080f130 r2: 0x0000000000000000 r3: 0x00000000a2942b88
r4: 0x0000000090a4dff0 r5: 0x0000000001800000 r6: 0x00000000ffffffff r7: 0x00000000000000ff
r8: 0x0000000000000001 r9: 0x0000000008adab50 r10: 0x0000000000000006 r11: 0x0000000022000442
r12: 0x0000000092921264 r13: 0x0000000000443204 r14: 0x0000000008adbad0 r15: 0x0000000000422598
r16: 0x0000000006bb7700 r17: 0x00000000067bbbd0 r18: 0x0000000000450000 r19: 0x0000000006bb7700
r20: 0x00000000a40d3a5c r21: 0x0000000000450000 r22: 0x0000000000440000 r23: 0x0000000000440000
r24: 0x000000000672c570 r25: 0x0000000008abfea0 r26: 0x0000000000000000 r27: 0x0000000000000001
r28: 0x0000000006be3840 r29: 0x0000000090a82eec r30: 0x000000000115dfc0 r31: 0x000000009295f028

I guess then you'll have to delete everything related with Aperture (except the Library) and re-install it again, together with updates and then try importing.
I'd run a maintenace app like Onyx or Cocktail and restart the Mac before installing it.

RoboHelp 7 crashes when creating new project with files from VSS

RoboHelp crashes when I create a new project and choose to get existing files from Visual Source Safe to load into the project. Does anyone have a solution to this problem or a suggestion as to why this may be happening? I'm attaching the errors associated with the crashing.
Also, we have a very large Help system (985 topics) which compiles into a 46 MB chm file. Is there a maximum suggested topic size (per topic) and a maximum suggested number of topics per project? Could this be part of the reason RoboHelp is crashing? We've always had a large Help system since we started using RoboHelp several years ago but the crashing is a more recent problem.
Thanks,
Carissa

I had the same issue then I found out all you have to do is to set the default view to List before opening any previous or new project and it worked, credit goes to this user below who found the solution.
ahmedMac25
I was able to resolve by workaround:
1. Closed all open applications
2. relaunch Finder
3. run sudo find / -name ".DS_Store" -exec rm {} \;
4. this removes all .DS_Store old files on the computer
5. launch finder and set default view to "LIST VIEW" as shown here:http://macs.about.com/od/usingyourmac/ss/Setting-Finder-Views-For-Folders-And-Su b-Folders_2.htm
5. rerun the offending application and file chooser works

InDesign CS4 crashes when selecting New Color Swatch

Any idea why InDesign would be crashing when I select New Color Swatch? I can Load Color Swatches or choose from the swatched in the menu, but if I try to add a new color it crashes no matter what type of document I am working on.

This is the sort of error, if happening in all files, that is usually fixed if you Replace Your Preferences

Crash when creating new file

illustrator crashes when creating a new file or opening existing - no special message. Just "illustrator has stopped working"
graphics drivers uptodate, tried uninstall, reinstall, tried cleaner, tried sign-out-of creative cloud, nothing works.
running windows 8 64bit

If it works on another account, then pretty obviously your permissions are screwed on the other account and you need to fix them...
Mylenium

Aperture 3.4.5 crashes when building new Vault.

Similar Messages

Maybe you are looking for