Aperture 3.5 Full Screen mode really buggy

Let's try this again....
I'm looking for anyone else having this problems to see if they have found a work around.
I have been having several intermittent problems with Aperture 3.5 in full screen mode with Mavericks. Most of the time, it's ok. But now and then, it seems to get stuck on something. When I swipe to go back to another application, it goes to my widget's panel, not the desktop. Swiping up to get mission control, I see the desktop and go to it. That really messes aperture up. You go back into it and its a black screen. I try to get out by pressing F and sometimes it works, sometimes not. When it DOES work, I will select an image in the browsers and strangely enough, the screen goes black and it goes back into full screen mode. Kind of a mess.
Additionally, the entire app seems to drag. Selecting an image make take 3-5 seconds for it to switch from the one it is on to the one I selected. And I'm using a fully loaded top processor speed/max memory 27" iMac from last year.
Has anyone else experienced this and found a work around?

Thanks, both.
I did try it and it somewhat changes the problem, but it is still there. The full screen system seems to get messed up and when it does, it can't seem to get out of it totally. When it starts singing daisy in full screen mode and you get it to exit full screen mode, the top menu disappears and selecting anything (even empty gray space) within the app sends it back into full screen mode, but once here, nothing responds to user action (can't select images from the browser, the HUD is unresponsive, etc). A few other quirks I can't nail down with any consistency.
The only way I have found to avoid it is to completely exit the application, reboot, restart it and never go into full screen mode. It's still a little more sluggish that it should be, but at least I can do my work and get things to clients. Entering full screen mode just seems to be too buggy for practical purposes so far.

Similar Messages

Aperture in full screen mode seems to crash MacBook Pro with Retina

To anyone who has an idea;
I have a brand new (couple months old) 15" MacBook Pro w Retina (16GB RAM, 2.3GHz i7) and I can repeatedly crash it just by running Aperture in a full screen mode and flipping through the photos (I have 21000+ photos and I was cleaning them so it required a lot of flipping back and forth, deleting but no editing). It appears as if it was running out of RAM and not releasing it back. I have all the latest updates installed (always) and I know this is not related to my machine since within the first week of having it I noticed a dent on my screen and Apple sent me a brand new machine. I could replicate this behaviour on both machines.
To mitigate the restarts, I use FreeMemory Pro app set at "freeing" RAM once it drops to 4GB but if I push the Aperture too fast (and I do not mean major editing but just simply going through many photos in full screen mode, viewing them), I still crash it.
I was wondering if there is anyone else with something similar and if you have any tips. I have reported it to Apple.

Hi,
I'm having exactly the same hard- and software configuration like you, Gordito73 - up to date of course as well. Aperture continues to crash after it really seams to run out of memory while editing lots of photos with many different effects. -.-

Aperture Performance Sluggish When in Full Screen Mode

Hi
I have an iMac 3.06 GHz with a NVIDIA GeForce 8800 GS:with 512 MB of VRAM and 4GB of RAM and every time I go to Aperture's fullscreen mode performance is sluggish. When I click on buttons with my mouse it takes them about 3 to 5 seconds to actually realize they've been clicked. Also when I try to adjust something in a HUD, it takes forever to register my command. I would love to be able to use full screen mode because of my big screen on my iMac but it's really not worth it if it's this slow.
All help appreciated
Thanks in advance
macdiscuss

My problem has been solved. It was just my particular photo.

Aperture 3.1 - Love Full Screen Mode, Hate The System Lock-Ups

Hi Guys,
I don't know if I'm the only person encountering this issue but Aperture 3 is driving me nuts. While I absolutely love the program and the full-screen mode, what I hate is the frequent lock-ups that force me to completely restart my iMac. Having the application lock-up is highly annoying but at least in "normal" mode I could kill the application from the Dock or Activity Monitor. However, when I'm operating in full-screen mode then I can't switch out of the application and seem to have no option but to completely restart my computer. This problem, which I first started experiencing with version 3.0 but which does seem to have been addressed in version 3.1, is happening so often that I'm afraid now to even use full-screen mode.
This problem only, to my memory, seems to happen when making adjustments but it does not seem to matter which adjustment. In the most recent occurrence the lock-up happened when I cancelled the application of a Crop by clicking the X icon on the Crop HUD.
Does anyone know either a) what might be causing the lock-ups, or b) how I can kill Aperture without having to completely restart my computer?

You could also set up SPACES to see if that works when lock up occurs in full screen
Apple Icon > System Preference > Desktop & Screen Saver > Hot corners
I have bottom left set to spaces
Then drop the mouse to bottom left, 4 windows appear, drag aperture to a seperate window and run there, you desktop is in a different space and can be accessed by bottom left of screen mouse movement (if the mouse works when A3 locks up)

Why does Aperture implement full screen mode differently to other Apple software?

Yes I know I always was pretty thick, and things haven't improved as senility draws nigh, but I have not yet found a way to run Aperture as I would like to.
What I want to do is to run the NON full-screen interface in a manner that occupies the whole screen. This would have two benefits:
1. It would proved larger images, since the lower border of the application would cover the dock.
2. It would enable a more efficient conversion between Aperture and related non full-screen programs such as finder, scanner software, etc. In the modern OSX fashion, one would simply swipe from one to the other.
Yes, I do know how to run in Aperture's full-screen mode, and I use it a lot, but the work I'm doing right now demands frequent trips back to the browser interface, and I want it bigger, better.
Please tell me I'm missing something fundamental.
Of course, it might just be sorted in an up-coming version of Aperture.
Thanks for reading this and hopefully, for your tolerance.
julian

Julian
Perhaps I'm missing something here - so if this answer is wrong - apologies in advance
Try clicking the 'Plus' button top left of the Aperture window. (This is the same button that would be green in a Finder window)
Press it again to revert to the previous non full window view
Brian

Aperture 3 - Full screen mode "stuck"

Apologies if this subject is being discussed elsewhere; all I've found are a few orphaned threads with no answers.
The problem: when I toggle into full-screen mode (for, say a single image) I cannot exit. The only way to get out of it is to quit Aperture.
This has persisted for a few weeks now and is making the program almost unusable. Any thoughts/advice?
Thank you,
David

Trashing the prefs worked like a charm. Thanks for the quick and almost painless solution.

Full screen mode broken in Aperture since Lion update?

Just been testing and it seems Lion or something has messed up Full Screen mode in Aperture. Any one else getting the same?

I click top right icon or hit 'F' and it eventually loads to the browser window but the dock is on top. I scroll with 'V' to get to desired view. Usually a beachball for 10 secs.
Leaving full screen mode using 'F' goes to black screen and just hangs or shows normal mode which then fades and goes back to black. Hitting Esc to get out gives me a black screen and nothing happens too.
Only way out is to use scroll left gesture on Magic mouse to get back to desktop. have to quit Aperture to get back to normal mode.
And repeat...

Aperture screwing with brightness in full screen mode

For some reason whenever I go into full screen mode Aperture keeps adjusting the brightness of my images. Every time I do anything it first looks "normal" then the brightness gets jacked up a few percentage points. When I turn on the Loupe, the image shown inside the loupe is darker (as it should be) as this odd "auto brightness" effect doesn't show up there. When not in full screen mode this doesn't happen. Saving the photo results in the correct image as well. So long story short this is only happening in full screen mode.
I tried disabling the "On screen proofing" but it doesn't seem to have an effect. This is driving me nuts because I have no way to see the ACTUAL image until I save it! Thanks for any ideas you may have.

Another update: I changed my external display to "default" in ColorSync Profiles as recommended in another thread, still have the same problem.
I have now noticed that this phenomenon only occurs when the image being displayed on screen has to be scaled down to fit - so apparently there is something going on with Aperture's image preview being created on the fly?

Full screen mode - Issue with Aperture freezing

Hi I have an issue with Aperture 3 freezing if I send an image to a plug-in or external editor while in full screen dual display mode. I have to exit full screen mode first and then send to photoshop/external plugin.
It is not a huge deal and a simple workaround but if I forget to do it Aperture will freeze and I will have to force quit the application.
Any thoughts or suggestions welcome.
Thanks!

Just send a comment to Apple via "Aperture→Provide Aperture Feedback".
IME, both full-screen mode and dual-display mode have some rough edges. (I don't expect any improvements until OS 10.7, which is widely reported to include a full re-design of full-screen mode.)

Issue with Aperture full screen mode on HD 5870

I have a very strange problem with Aperture, which may be linked to the HD 5870 and it's probably faulty drivers and would be very grateful if somebody with the same hardware could try this out if he/she can replicate this behavior:
I have a brand new 6-core with the 5870 optional card using a dual display setup (ACD 23" and NEC PA241W).
Whenever I enter full screen mode and activate the brushes, the image on the full screen monitor is reduced in size to about 70% of the full screen resolution. This also gets triggered, when I use the HUD display ("H" key) and lock the floating window on the browser display.
It's a bit hard to describe, but anybody with the same or similar setup, please try this:
- enter full screen mode in Aperture by hitting "F"
- press "H" and lock the window using the small slider in the upper right corner
- activate any of the quick brushes, like dodge or burn
Is your image, which is displayed full screen on the main monitor, getting smaller in size or is it starting to flicker a bit, getting darker? If yes, we have a universal bug here.
I could narrow the problem down in a sense, that it does not matter if either screen is hooked up using the DVI or the Mini-Display-Port. It also happens when I switch the main screen over to the other, so it's (fortunately) not a problem of my new NEC display, the ACD shows the same behavior.
My best guess right now is some kind of bug in Aperture combined with a faulty driver of the HD 5870.
Any help here is greatly appreciated.

People have said that Aperture library benefits from, and should not be, on the boot drive, and placing on SSD or alternate drive, maybe RAID 0 in some cases.
64-bit kernel mode helps overcome some of the limitations and obstacles when working with large data sets, which is why I always kept data off the system and placed on RAID 0 which does improve system responsiveness.
If you have already done that and taken steps to optimize your storage layout hard to imagine it is a graphic driver.
And I would limit removing caches to just Aperture's own, though can't hurt to clean out the system's, that is something that SuperDuper will do if you use it, as it doesn't copy those and just skips caches and temp files best rebuilt (but does not touch user caches).
And a touch of Disk Warrior just for good preventative maintenance measure of course.

How to show up "Photo Tour Bar" in full screen mode under Aperture 2?

HELLO,
Mine is a MBA with Aperture 2.
I am unable to show up the photo tour bar in full screen mode>
What should I do to get the photo tour bar on the top of my full screen mode?
Camera Canon 40D.

Hi 153957,
Thanks for the response.
I could see the film strip on the bottom ok in Browser plus viewer mode.
When I go to viewer screen the full screen mode and I could not see the Photo tool bar-sorry I spelt it "Tour" in my question.
Now I realised that the Photo Tool bar only appear when I move the cursor to the top of the screen.
However in full screen mode I am unable to bring my inspector! Is that possible?

Banding in Aperture 3.3.2 Full Screen Mode

A few raw images (Panasonic LX-5) are exhibiting a kind of two-tone gradient when in full-screen mode. The image will be sharply divided into two regions: one lighter than the other. It only happens in full screen mode on 3.3.2 on my Mac Pro (ATI5770, NEC2690WUXI). Doesn't happen in Aperture 3.2. Doesn't happen on my '08 MBP, '10 MBA running 3.3.2. Also it doesn't affect every photograph - only about two or three out of about 300 and different ones each time I restart Aperture.

I need to add that the problem appears to be intermittent - it doesn't happen every time.

Every time i try to enlarge a video to a full screen mode, my Macbook reboots! This started to happen after i upgraded my firefox to 4.0.1. ! This is really annoying.

I have a Mac-book, i always use Firefox and never Safari nor anything else! I had it on for a long time, never done any sever crashes! but just a few days ago, Firefox asked for an upgrade which I've done. Now every time I try to run an online video "through the Firefox page" on a full screen mode, my mac reboots! Just when i click full screen :@
It never happened before.
I shall mention that this fault happens from time to time! and most videos run slow most of the time.
I am very sure that it's not my laptop!

I have a Mac-book, i always use Firefox and never Safari nor anything else! I had it on for a long time, never done any sever crashes! but just a few days ago, Firefox asked for an upgrade which I've done. Now every time I try to run an online video "through the Firefox page" on a full screen mode, my mac reboots! Just when i click full screen :@
It never happened before.
I shall mention that this fault happens from time to time! and most videos run slow most of the time.
I am very sure that it's not my laptop!

Aperture full screen mode has an annoying imperfection.

Hello I wonder if anyone can help?
I use Apperture 2 for creating a catalogue of my paintings. On the viewer window, when in full screen mode, there is a bright white tiny window on the bottom of the selected image. This little window has two arrows on it.
Is there any way of eliminating or at least fading this window, so that it does not detract from the image?
Thank you
Robin Cecil-Wright.

Thank you RB
When I do what you said it changes the arrows and instead I get details of the photograph. I am attaching a screen shot as you suggested. Well that is I have tried to, but I don't quite know how to !I /Users/robincecil-wright/Desktop/Picture 4.png/Users/robincecil-wright/Desktop/Picture 4.jpg
Robin.

Full Screen Mode - not "Full" on MacBook Pro w/30" Display

I'm using a 15" MacBook Pro (early 2011) OS 10.7.2 w/Photoshop 12.1 x64. I'm using a 30" Cinema Display. When I select Full Screen with Menu Bar Mode there is a gap at the bottom of the screen where the desktop is visible. I also notice that the Rotate View Tool is not available when the 30" display is in use with MacBook, although it IS available when I work from the MacBook screen. (Open GL Mode - Normal is selected in PShop Prefs) Any fixes for this?
I also work at another studio which has a MacPro running PS 12.1x64 on a 30" display. The full screen mode & Rotate View both work properly on that system.
Perhaps someone will insist that this is a question for the Apple forum, but I'm guessing that forum will insist that I start here. So here goes. Thanks.

Hi,
I'm having exactly the same hard- and software configuration like you, Gordito73 - up to date of course as well. Aperture continues to crash after it really seams to run out of memory while editing lots of photos with many different effects. -.-

Aperture 3.5 Full Screen mode really buggy

Similar Messages

Maybe you are looking for