Aperture 3.6 will not start after new install

Rebuilt my Mac Mini with a clean install of Yosemite 10.10.2 and reinstalled all my apps. Downloaded and installed Aperture from the App Store but it will not start. No crash, just nothing. Does its animated thing when double-clicked in Finder, and goes through the usual launch action from Launchpad, but then nothing. No icon in the dock, does not appear (even momentarily) in Activity Monitor. I have Final Cut Express installed and have seen other launch issues with this combo, but they all seem to result in an Aperture crash. Any ideas?

Did you install Final Cut Express after you installed MacOS X? Then install Yosemite again on top of the current system, without reinstalling the applications. See: Aperture 3.x: Aperture unexpectedly quits if Final Cut Express 4 is installed
Aperture does not work after installing FCE, but if you reinstall MacOS X after installing FCE, both Aperture and Final Cut Express sgizld work.
The download of Aperture may be incomplete. If reinstalling the system does not solve this, trash Aperture and download again.

Similar Messages

Will not start on New Install. Opening goes straight to Crash reporter

Will not start on New Install. Clicking on icon does not open a window and goes straight to Crash reporter. I cannot access a window to try to open in safe mode (unless there is another method than outlined in the help article).
I run Windows XP and trying to install the latest 15.0.1 version. Before install, I did disable my Symantic virus protection. I have never used Firefox and would like to try it, but I'm having little success so far to even get started.
Please let me know if anyone has any other ideas or need more information from me.

hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
[[Troubleshoot Firefox issues caused by malware]]
edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

FP Install Will Not Start after DLM Install

The FP installation will not start after an apparent DLM installation. The DLM appears to install and the control panel shows it is present, but the FP installation will not start. There are no other messages that appear. A restart and reinstallation attempt installs the DLM again, but still no FP install. Using XP SP3 and IE 8.0.
Thx

Hi mont1228,
The Adobe Download Manager (DLM) executes the Flash installer in "silent mode" so you shouldn't see a dialog box. To confirm that Flash was installed successfully, go to http://www.adobe.com/software/flash/about/ and let me know if the animation doesn't appear.
Best regards,
Chris
clechner//adobe

My iPhone will not start after new software update. Freeze on apple screen

I updated the phone software today through the new software update directly from the phone and it will not restart past the apple screen. I have tried a hard restart, no dice.
wish I had waited.

Got it back up and working by putting in recovery mode and restoring through itunes, but lost lots of settings and app. info. I took about 4 efforts to resync after restore, not sure why, certainly not smooth or intuitive. 2 hours of my life I wish I had back.

Firefox will not start, after reboot.

For a few months now Firefox will not start after I reboot my computer. In order to get it to start I click the exe then must go into task manager kill it, click the exe again, kill it again then, from there it will typically start, but sometimes it may take one or two more trys. When clicking the exe firefox will appear in the task manager under processes but will will start with ~7% CPU usage, then quickly drop to zero every time until it does actually open and start. I have ran a full system recovery and started anew after reinstalling mozilla several times failed to fix the problem. I run virus and spyware checks often and come up clean, and also run Chrome as a default browser.
== This happened ==
A few times a week
== Around the time 3.5 was released

Hello Tom.
You may be having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not coming from one of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] and select ''Disable all add-ons''. If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and theme. You can troubleshoot plugins the same way.
If you want support for one of your add-ons, you'll need to contact its author.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

SLD will not start after I upgraded Netweaver 2004s Portal

SLD will not start after I upgraded Netweaver 2004s Portal from SP 14 to SP 15.
It gives me the following J2EE error:
Application error occurred during request processing.
Details: java.lang.NoSuchMethodError: com.sap.sld.api.wbem.transform.ICIMParser.getNamePool()Lcom/sap/sld/api/wbem/cim/NamePool;
Exception id: [00145E336A6A00680000002A000003480004502001E11FF0]

Hi ,
as a first question: What versions of WAS / NWDS are you using?! (Main question is if you are using corresponding versions, i.e. NWDS 2.0.x with WAS 6.40 SP x, with the same value for x.)
See the threads below for more information
NetWeaver 2004s upgradation problems
Could not run WebDynpro Tutorial - NoClassDefFoundError
Points are welcome if it is useful
Koti Reddy

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

After instaling the update for OS yesterday (saturday 7.10.2012) my macbook pro will not start. The instaling proses start but stopp after 2-3 minutes. I have started mayby 10 tims know but it stops every time. Help, its just a monts ago my iMac hard fail

Actually it sometimes gets a little further, the display will dim and the pointer will appear and then whoop it will turn off. if i do a verbose start up, it will finish all the steps, the white screen will appear and dim and then it will turn off.

Aperture crashed and will not open after last update. Anyone else have this problem?

Aperture crashed and will not open after last update. Anyone else have this problem?

Yes. See this very forum for 50 threads on it, that explain the solution.

HT1338 Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Final Cut Pro will not update after new os and compressor will not run until the update is done. System shows no updates available

Sorry for being unclear.
When I am using the update in the App Store App, there will be a list of various applications that have updates to be installed (Final Cut Pro will be in this list). I will already be logged in with the Apple ID I use for everything (my dev account). I will be able to update all of the other various applications needing updating except for my Final Cut Pro. When I click the update button next to the FCP update, it will give me an error saying "This download is not available for this apple ID either because it was bought by a different user or the item was refunded or cancelled"
I have not had any applications refunded or cancelled and this has only happened since my update to Yosemite. FCP was working fine until the upgrade. Is there anything that can be done to fix this?

TS3297 Just rented a movie in French on my iMac... movie will not start after download ?

Just rented a movie in French on my iMac... movie will not start after download ?
What I do now ?

Okay. I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

IPod service manager will not start after installing iTunes 10

iPod service manger will not start after loading iTunes 10. iPhone will not connect. I've removed reinstalled, wiped the registry reinstalled and deauthorized, removed and reinstalled from several different downloads. I have full permissions fo rservices and am administrator.. We now have three other units in teh office with the same issue.
now what do I do?

Don't know about fixing PitStop. However, have you tried a simple repair on Acrobat. If Acrobat won't open you can do that from the Programs and Features menu (Add/Remove Programs in OS prior to Win7).

Apps will not open after ios5 install. Any solutions?

Apps will not open after ios5 install. Any solutions?

My husband had the same problem with some apps after I updated his iPad 2 to iOS 5. I checked the app store and there were updates for the apps to support the new software. After updating, all apps work just fine.

Mac book pro will not sleep after i installed mavericks

mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

Premier elements 12 will not run after re-install

Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

Aperture 3.6 will not start after new install

Similar Messages

Maybe you are looking for