Aperture 3 and importing
Aperture 3 seems to have added a check box for selection of images to i mport. Is there any way to go back to the selection process in Aperture 2 without the check box?
No. But there are buttons there to automatically Check or UnCheck all.
Regards
TD
Similar Messages
-
Having installed aperture 3 and imported iphoto library (15000 photos) Apertue 3 does not render most of my photos corectly most a blurred pixellated and distorted. Reverting to photo produces perfect results. Any suggestions
Galdaplh,
What do you mean by "reverting to photo"? "Revert" is not a function in Aperture so you must be talking about something else.
If you just performed the import of that many photos, Aperture will take some time to generate thumbnails. You can see if it is doing this sort of thing by {Command}-{Shift}-0 to show the Activity window.
Once Aperture generates all its thumbnails, you will have nearly instantaneous access to much, much better thumbnails than Aperture uses immediately after importing photos.
nathan -
How can I delete my Aperture library and import into iPhoto?
I have decided that I prefer the simpler interface of iPhoto, and I'd like to move all my photos back to there. I'm aware of the new feature that allows iPhoto to open up Aperture libraries; however, I want to delete the Aperture library and import all the photos into iPhoto. What's the simplest way to accomplish this?
The Library file format is now the same. If you have upgraded to the most current versions, you do not have to do anything to your Library: you can open it with either iPhoto or Aperture. Since you prefer iPhoto, simply open your Library in iPhoto.
As others have suggested, you might as well keep Aperture (the program) around, in case there is an adjustment or other function that you can effect with it that you cannot with iPhoto.
(Sent from my magic glass.) -
I have an iPhoto library with only Jpeg's in it. I just installed Aperture 3.5 and imported several RAW photos in Aperture. Shouldn't I now have an Aperture library?
Should I create an Aperture library and import all of my photos from iPhoto to the new Aperture library? Then delete my iPhoto library entirely? Just trying to get my library structure correct from the get-go as I plan to shoot only in RAW.
That is not an easy question. There are still a few glitches with the unified library approach. For example, the new iWork applications will not yet show the Aperture library in the Media Browser, only the current iPhoto library. If you are using iWork with your photolibrary, keep it an iPhoto library.
And it is unclear, what will happen, when Aperture or iPhoto will be upgraded to newer versions. Right now you need the latest iPhoto version to be able to upgrade older iPhoto libraries, if you want to open them in Aperture. So probably you will need to upgrade iPhoto as well, if you keep your library an iPhoto library, when both Aperture and iPhoto will be upgraded to Aperture 4 and iPhoto 12.0 or similar. In the long run it will be safer to convert the library to an Aperture library, if you do not want to keep updating iPhoto, but that can wait.
If you want to convert the iPhoto library to an Aperture library, back up your iPhoto library.
Then create a new Aperture library (with File > Switch to Library > Other/New ) and then import your iPhoto library into Aperture using the command "File > Import > Library" and select your iPhoto library.
You will need plenty of space on the drive with the new library. Merging a library into another one will temporarily a lot of working space and may take a long time - several hours for a large library, without visible progress. -
According to the manual, Aperture 3 can place photos on a map based on camera GPS data, or else manually by clicking on a map.
I have a camera that doesn't support GPS and was hoping I could find a solution where Aperture can add GPS EXIF data based on importing from a GPS log (from a dedicated GPS device) and comparing timestamps.
Do any such plugins exist for Aperture 3?
(BTW, I've read people's iPhone-related solutions, and that is not going to work for me since I will be roaming in places where the iPhone's accuracy will be called into question...not to mention I'd have to remember to snap an iPhone photo at every waypoint along the way.)1. GPS Track file: I use "GPS Tracker" (free, app store) on my iPhone to store the GPS track logs on instamapper.com (free). Define the trip and download the track file (in .gpx format).
2. I took about 200 pictures over 3 days on my Nikon D100 onto a CF card.
3. I opened Aperture 3 and imported the images into a new project. I clicked on (Places) button. Used the [GPS] drop down and selected "Import GPS track" (this drew the track nicely!). Selected all images. And dragged the selected images to the track. Aperture asked to assign locations based on time. I selected (Assign Locations). None of the images were assigned the correct locations I removed the images from Aperture.
Marc Vose wrote:
Just wondering which program you're using to actually bring the images off the camera in this scenario.
4. I placed the CF card into the usb CF reader and copied the images to a folder using the finder.
5. I installed exiftool (link: http://www.sno.phy.queensu.ca/~phil/exiftool/) and issued the terminal command:
$ exiftool -geotag=/Users/kent/Downloads/Vacation-2010-02-AZ.gpx .
This tagged all the images in the directory using the track file Vacation-2010-02-AZ.gpx
6. I imported the images into Aperture, clicked on the [Places] button. And all the images have been correctly placed.
7. I burn the raw images to dvd before formatting the CF card (send off-site for backup .
The GPS track support still needs some work in Aperture - but is it nice to be able to work with location information on the images. -
Aperture Crashes While importing iPhoto 11
Hi all,
I hope someone can help as I'm getting desperate. I have spent hours on the phone with Apple tech support to no avail.
I have an iPhoto library of 45K photos that I am attempting to import to Aperture 3. However, Aperture repeatedly crashes before completing the import. This happens at different times in the import (sometimes after importing 100 or so events, other times >300 events, but it never makes it to the end.
So far, I have tried the following (each time into a new Aperture Library):
1. Duplicated and rebuilt the iPhoto library with command-option (crashed).
2. Shift opened Aperture to disable background processing (still crashed).
3. I tried importing a few events at a time, but with 45K photos that required the patience of job which unfortunately I do not have.
I am running on Aperture 3.1.1, iPhoto 11 (ver 9.1.1), OSX 10.6.5, on a 2.66 Quad Core Xeon MacPro with 8 GB ram and 6 TB hard drive space.I figured out a "work-around" and I was able to import my iPhoto Library into Aperture. But in order to do it, I had to break up the iPhoto Library and import year-by-year, with each year going into a different Aperture Library. Most of the years imported without an issue, but there was 1 set that crashed a couple of times, so I assume that that's where the problem was.
At any rate, now my iPhoto Library is entirely converted to Aperture, but in 6 different Aperture Libraries with all the photos residing within the Aperture Libraries themselves. Is there a way now to consolidate them into 1 Aperture Library? Or do I have to create a 7th Aperture Library and import them in 1 by 1?
George -
Hi everyone,
I recently purchased a new MacBook pro with Retina display, to better manage Aperture and Photoshop. I took the advice of the genius (and after spending all night messing with permissions, etc.), opted out of using Setup Assistant or Migration Assistant and decided to transfer my files manually (as the two systems weren't merging properly the first time -- it was a giant mess). Long story short, I tried to transfer everything from my previous MacBook (operating on 10.5.8 with Aperture 1), and Aperture 3 couldn't handle it. It was crashing, and crashing so badly that NO button could be activated in the program (I FINALLY got Aperture working by disabling previews, and by moving from a managed library to a referenced library).
I initially dragged and dropped all photos from my previous MacBook to my external, and imported. I obviously lost folders, edit history and any other information that I needed to know what edits had been done on the file. Additionally, any movie that had been imported into Aperture was corrupt (the file was not transferring over correctly). I searched and searched for different methods, and finally found that I could export each project from my original MacBook as a "Library" and consolidate masters, or not, etc. I took the time and did this for each project. When I went to import these into Aperture 3, it said I was not able to because the libraries were from a previous version of Aperture.
Is there any way to bypass this? Or another way to transfer my projects? I understand I won't be able to do this for my entire library... but I'm wondering if there's any way to transfer my changes made, projects and details from Aperture 1 to Aperture 3? (and for those who might pose upgrading my original MacBook as an option, I cannot. It's too old. I think the best I could uprade to is Aperture 2, IF i can update the OS. Though, I definitely don't think I should be forced to do that since I've aleady re-invested in a new computer, AND had to re-buy Aperture for the new one.
Any/all advice is VERY much appreciated, as I really want to move forward and FINALLY start appreciating this program and computer (i.e. my investment) and move forward business wise. Thank you!Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems. -
Importing masters from iPhoto to Aperture 3 and saving as referenced files on external drive
I'm making the move from iPhoto to Aperture 3.I'm new to Aperture 3 and want o make sure I am importing and saving correctly. So far, I have imported my library of events from iphoto to Aperture 3. I understand that for the most part, it makes sense to house this library on an external drive as "referenced files" vs within Apeture as "managed files." I'm not clear on exactly how to accomplish this set-up. Is this something I should have set-up when doing the initial import or can I move the files now? Once this is done, when importing new files, how do I import to Aperture 3 but save on external drive?
Thanks in advance for your help!A fabulous answer:
In the olden days ( ) when hobbyists made their own telescopes from kits, everyone wanted a six-inch lens, and the kit makers shipped six-inch lens blanks. Which the hobbyists used to learn lens grinding. Which is arduous and requires skill. Which the hobbyists didn't have until they'd ground that six-inch blank -- an expensive piece of high-quality material at the time -- into a lumpen flawed approximation of a good lens. Then the hobbyists would contact the kit makers and ask for another lens-blank, so they could build their telescope. At which point they would drop the project because the six-inch lens blank cost so much. And much calumny was rained on the kit manufacturers.
Now the kit manufacturers wanted to promote a hobby, and make, in addition to telescope kits, money (not calumny), so they together and separately hit upon the idea of supplying the hobbyist with _two_ lens blanks: a four-inch blank, and a six inch blank. Nobody wanted a four-inch telescope -- but that's not what the blank was for. The instructions read (I've shortened this part) "Grind the four-inch blank into the most perfect lens you can. Check it and re-check it. Now throw it out. You likely now have the skill to grind the six-inch blank into a useable lens."
Thus endeth our fable.
The point, of course, is: start small and gain skill before committing time and material to a task. Port just a small sub-set of you photos into Aperture. Experiment with it. Try different workflows. Think about how to best use the containers and organization tools Aperture provides. Develop a long-term naming convention for files and Projects. Work out a back-up strategy that is scalable and that you will stick with. My specific recommendation for beginners is: don't worry about Referenced v. Managed at first. Make all your Masters Managed. When you have your four-inch Aperture Library all smooth and even, put the entire thing in the system trash -- and then you can start working on an Aperture Library fit for your photos -- one that will allow you to see far, and clear, for years.
Good luck. -
I have my camera (Canon 5D Mark 2) set to take both JPEG Large and Raw files with each shot. I uploaded the images from the card to my Pro (Aperture 3) and while the import info said 1500 images were uploaded, I can't find the RAW images. Aperture put about 700 images in an untitled project folder, but all the images are the JPEGs. What am I missing?
Thanks,
upsjdrisHave you checked your "Import" settings for "Raw&Jpeg" pairs in the "Import" panel?
You can set Aperture to import raw, jpeg, or raw&jpeg.
If you imported Raw&Jpeg, but have set Aperture to use the Jpeg as original, you will see the imported image as Jpeg image, not as a raw image, even if the raw has also been imported. You can switch between Raw and Jpeg originals for selected images from the Photos menu:
Photos > Use Raw as original.
Regards
Léonie -
Aperture isn't importing videos from iPhone, only photos. I've tried plugged in and over wifi. Help?
Aperture isn't importing videos from iPhone, only photos. I've tried plugged in and over wifi. Help?
How did you transfer the photos from your other iPhone? If you did it by importing them from the old phone to a computer and then used iTunes to sync them back to the new phone, then you would delete them by syncing again using iTunes but this time change the selection of which photos are to be synced. Each time you sync using iTunes, it sets the non-Camera Roll photos on the phone to match the current settings/selection in iTunes.
-
Any value in exporting iPhoto pictures and importing them into Aperture?
I am moving from iPhoto into Aperture (moving my library again actually) and I know that iPhoto and Aperture can share the iPhoto library once it has been updated but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library? The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original. A couple of weeks ago I moved my iPhoto library onto an external LaCie SSD disk to use with my MacBook Pro but unfortunately corrupted that library and have to make the move again. If there is any value in changing how I'm managing my library I should do it now.
The library corruption was caused by me needing to leave for work and disconnecting the LaCie before Aperture was done sync'ing with my Flickr account. When I tried to use Aperture the next day it was not able to repair/rebuild or use the iPhoto library at all. I was unfortunately not backing up the external disk so I lost everything that I had done to clean up the library after the move. One lesson that I learned was do not automatically sync with Flickr because doing this on an MBP via wireless with an external disk library can add a lot of delay to shutting down Aperture after an MBP wakeup.Just in case you have not come across these:
Aperture 3.3: Using a unified photo library with iPhoto and Aperture
Aperture 3.3: How to use Aperture to merge iPhoto libraries
but I am wondering if there is any value (or even if it is possible) to export all of the iPhoto pictures and import them into a new Aperture library?
You can - an it will depend on what you want to achieve, if that will usefull. The way to do this would be by imprting your iPhoto library into an Aperture library using Aperture. But Aperture libraries and iPhoto libraries are now interchangable - both are photo libraries, and you could simply use your iPhoto library in Aperture and be done now.
Some reasons why you would want to turn your iPhoto library into a library recognized as Aperture library by importing it into a new, empty Aperture Library:
As long as the photo library will have the "Kind: iPhoto library", you will have to upgrade both iPhoto and Aperture always to the newest versions, or you will not be able to upgrade to a new library format, when a new release of Aperture comes - say (iPhoto '12 and Aperture 4); you will probably have to buy both new releases to continue working with your iPhoto Library in Aperture.
If the kind of your library is "Kind: iPhoto library", it will appear in the Media Browser in the iPhoto section, not in the Aperture section, even if you are using it as your Aperture library. And before syncing with iTunes you will always have to open the Aperture library in iPhoto to point iTunes to it.
Also, in Aperture you have more control about what will be included in your library - In iPhoto there is no way to specify the size and quality of previews. If you do not want or need previews, or you want smaller previews, or no Faces, it would make sense to recreate your iPhoto library by importing it into a new, empty Aperture Library.
If you have more than one iPhoto Library, you can merge them into one big Aperture library to be able to browse all your images without having to switch between libraries. Aperture works very well with really big libraries. There is no need to split libraries.
The reason that I'm asking this is that I know there are a lot of duplicates in my iPhoto library and I know that Aperture keeps only the original.
That is what I meant by having more control on what will be stored. iPhoto will always store a very high quality preview of your edited version; in Aperture you can decide what the preview size and quality will be. But Previews and originals are not duplicates; they are not the same image.
Regards
Léonie -
Aperture does not import Nikon JPG files when RAW and JPG
I own a Nikon D2x that I download files to a Sony 40GB portable HD. When I shoot in RAW + JPG only the RAW file is imported when I connect the Sony HD to my Mac and import to Aperture.
If I open the Sony disk Icon on the Desktop, I can see both the RAW and the JPG. In fact I can finder copy both files to the Desktop with no problem.
Even when I connect the camera itself, the jpg files are not imported.
This makes me think I should just shoot in RAW and save the space on the memory card.
Why does Aperture not import the JPG files?it does import them ... but only displays the RAW file ... if you drill down into the library package you will see them ...
here are threads dealiing with same issue ...
http://discussions.apple.com/search.jspa?search=Go&q=RAW+JPEG -
Aperture does not import iPhoto movie Title and Description?
I recently imported a 16,000 image iPhoto Library to Aperture including 270 movies.
There were some problems with the import. An older camera's movies cannot be shown in Aperture and lack thumbnails -- though they can play (for now) externally in QuickTime player. Many other movies lacked thumbnails, but Aperture added them with the Generate Thumbnail command.
These are annoying glitches, but I had a more serious problem with Aperture's iPhoto import of Movies. None of the Titles or Descriptions were imported into Aperture.
Has anyone else seen this?Thanks! I've thought about this a bit more, and what the bug is.
I think it's an oddly simple bug -- maybe a hurried hack as Aperture 3.x was going to market and the responsible engineers discovered they were missing a key feature. They may have "stolen" the "set Version Name to Master Filename" function and, for iPhoto import, quietly made it "set Version Name to iPhoto Title" -- without revising their documentation or the UI.
Here's what I wrote up on my blog. I'll try to file a bug report against Aperture on this. I'll mark this post as answering my question
http://tech.kateva.org/2012/03/iphoto-8-to-aperture-3-migration-notes.html
Aperture handling of iPhoto Title data depends, mysteriously, on the iPhoto Version Name import setting that Apple documents as: "... choose Master Filename from the Version Name pop-up menu to have your files stored using the current master filenames from your camera or card". (Since we're importing from iPhoto, and not a camera or card, this documentation is misleading.)
In reality, during iPhoto import, setting Version Name = Master Filename does nothing of the sort. Instead, this is what happens:
The filename is equal to the filename used in iPhoto
Aperture.Version name is set equal to the iPhoto Title.
I don't know what Aperture would do if we set Version Name = a Custom name where one of the custom name components was "Master Filename". Would it still treat iPhoto.Title as "Master Filename"?
I think there are two bugs here. I think Aperture "Version Name=Master Filename" was supposed to set Aperture.Version to the file name, and that there was supposed to be ANOTHER drop down (and a custom name tag) that of the form "Version Name=iPhoto Title" -
Does any one have a suggestion as to how to get A3 to show the camera aperture setting on Leica M9 DNG files?
You will want to read this thread in its entirety.
The short story (as I understand it) is that the M9 body receives no information about aperture from attached lenses. It is able to derive an estimate of the aperture, though, and it lists this derived number in the metadata field "Approximate F-stop" (not the exact field name). Aperture (the program) does not report the contents of this proprietary field. -
i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.
Maybe you are looking for
-
Not sure why but unless I turn my phone off then back on a cannot send photos and even when I do that it will only send one. I have no issue recieving photos
-
"DO NOT OPEN" COME OUT UNDER MY ACCOUNT WHEN I START MY MACBOOK
"DO NOT OPEN" COME OUT UNDER MY ACCOUNT WHEN I START MY MACBOOK
-
Dear experts, We need to conver uncleared checks from legacy to SAP system. Can someon please explain what would correct approach? So I need to post a payment document type zp which should also have check number? What are the tables I should map this
-
HT5129 "The migration of your MobileMe albums could not be completed."
Can anyone assist me with this issue. Each time the MobileMe window pops up to ask if I want to migrate my photos from there to iCloud, I get the error message, "The migration of your MobileMe albums could not be completed." The only options I have
-
can anyone tell me if there is a way to empty the trash file on the Iphone other than by one by one..is there a control for delete trash?