Aperture 3 can't read .CR2 files Canon 5D

I use Aperture 2 since 2008, with my Canon 5D.
I switched to Aperture 3 on February 15 carefree importing my library.
But since 2 days Aperture 3 does not recognize the pictures of my 5D from my library and import from my camera.
There is no problem with jpegs.
I reinstalled Aperture, I created a new library.
But I still have the same problem.
Someone has an idea?
thank you

Canon 5D is supported by Aperture 3 and the raw processing . What exactly do you mean by
Aperture 3 does not recognize the pictures of my 5D
Do you get an error/diagnostic message, eg. unsupported format, are they displayed with "exclamation point" badges, or don't they display correctly?
Have you tried to reprocess the master images to force a new raw conversion (select the images in the browser and use the command Photos -> Reprocess Masters)?
But since 2 days Aperture 3 does not recognize the pictures of my 5D
What happened two days ago? Did you install other software? Did you experience any crashes, failed hardware recently?
Can you import your raws if you work from a different user account? Eg. the Guest account? If the problem only occurs when working from your account, you probably have corrupted preference settings. Then move your user preferences to the trash as described here:
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Regards
Léonie

Similar Messages

Canon DPP Can't Read CR2 Files

I'm considering getting CS3 but before that, wanted to try out using Canon DPP for my raw files taken with G9. I downloaded the latest DPP but it just won't display the CR2 files. Jpeg & Tif show up fine though.
Is DPP only for EOS only? I thought it should be able to read any CR2 file.
Any advice most appreciated.
Thanks.
Avivion

What Jim said. The Canon PowerShot G9 is supported by ACR 4.4.1, but I have no idea about ACR 3.7, which is the last version that can run in CS2, and no clue about Canon software.

Since upgrading to 5.2 LR says it can't read CR2 files

A couple of weeks ago I upgraded to LR 5.2 and since then LR has been unable to import my CR2 files from a memoery card that worked fine before that.

Canon G9
Mountain Lion
error message when I attempted to import images from card to LR -- even though I could see 520 CR2s on the grid
"could not copy file to requested location"
Everything abut this is the same as it was before I upgraded to LR 5.2 on Sept. 20. That's when it started refusing to import CR2s from same card I'd been using.
I connected with a chat help person and downloaded all the files to an external HD aa he instructed, butn I could not import even 5 from there either.
Message was edited by: pamhasegawa

Aperture can't read RAW files since update???

So I went to import the pictures from the holidays into Aperture yesterday and it wouldn't read the raw files. Aperture just keeps saying it's generating thumbnails. I shut it down, got on a plane and tried again today, same problem and even the photos previously imported and were fine aren't showing up properly. It just says "unsupported image format."
My last import was the last week of Novemeber.
Is anyone else having this problem since the 2.1.4 update??

I encountered a similar problem - see thread http://discussions.apple.com/thread.jspa?threadID=2274871&tstart=0
Did you also do the latest MAc Os update - with the additional DIGITAL RAW compatibility update 2.7?
I did the APerture update a while ago and everything was working fine - it is only after I did the latest OS update that I encountered the same issue.
Philippe

CS6 Bridge can't read .cr2 and .raf files anymore

Been having some serious issues with Bridge CS6. Seemingly overnight I can't open .cr2 files from a Canon 5D Mark III or .raf from a Fuji x100 anymore. I've tried updating, uninstalling and reinstalling, purging the cache, manually deleting the cache, running the cleaner tool, resting the preferences, but no luck. These are files I could read just a few days ago. Nothing else has changed.
I'm on a Mac, 10.6.8.

I have the same problem with RAW from my Canon M CR2 files. I am on PC. I can open them in the Canon software, but I'd rather open them in Bridges as there is mare that can be done with them and I have been using it for many years

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

Can't open CR2 files in photoshop and camera raw

This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?

Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well.

Aperture doesn't read raw files

Aperture just stopped reading raw files. NOt all of them, just some. It says unsupported file format. Why is this happening, what can I do about it?

Aperture 2.0.1, camera Canon EOD 400D, OS 10.5.2.
The problem is it didn't happen before, it started happening today after I changed places of many files, exported the biggest part to the external drive and created new projects leaving some photos there and changing places. I don't know what I did wrong. It can't read only some files.
Same thing happened with Iphoto as well some time ago.

Can't open CR2 files in PhotoShop CC. Raw plugin version is 8.3.0.141. MacBook Pro OS 10.9

I'm trying to open .CR2 files (Canon EOS Digital Rebel XS) with PhotoShop CC on my Mac. When I try to open them I get an error saying the file can't be opened. The raw plugin version is 8.3.0.141. Adobe's charts say I need at least "4.6,5.1" so I would assume my version should open it. What gives?

First thing I should do is to link you to the Camera Raw forum where the members there have a far better understanding of Camera Raw problems than I do.
If the generic advice doesn't work, it's time to bring in the specialists. Click on that link and post your problem with the CR2 files.
Adobe Camera Raw
Gene

Photoshop CS4 stopped reading CR2 files. Update failed.

My Photoshop CS4 quit reading CR2 files from my Canon EOS 5D Mark II. Photoshop update with new raw version failed. Please advise.
And many thanks!

This screen shot shows the correct path to the appropriate folder in CS4 on the Mac, which is not called "ACR folder" (that must be a Windows thing).
The version of ACR in the image is older (5.2, obsolete by now), because it's a screen shot from many moons ago.
The important thing is to start the path in the ROOT LEVEL Library, not your username or home Library:

I can not open CR2-photos (Canon)

Hello,
I can not open CR2 photos (Canon). :-(
Both Bridge and Photoshop CS3. Although I have installed the plug-in Camera Raw 4.6.
Lightroom 4.3 runs everything fine.
What should I do?
Thanks for your help!!!
Hallo,
Ich kann keine CR2-Fotos öffnen. :-(
Sowohl in Bridge als auch Photoshop CS3. Obwohl ich das PlugIn Camera RAW 4.6 installiert habe.
Lightroom4.3 läuft alles prima.
Was muss ich noch tun?

May I thought CS3 Camera Raw to version 4.6 supports only?
Have I said differently?
If you have decided to stick with an outdated version of Photoshop you have to accept that support for newer cameras will elude your similarily dated version of Camera Raw.
But the free current DNG Converter supports the same cameras as the most recent version of Camera Raw.
In any case you may want to post on the proper Forum.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

How can I read pdf files from LabVIEW with different versions of Acrobat reader?

How can I read pdf files from LabVIEW with different versions of Acrobat reader?
I have made a LabVIEW program where I have possibility to read a PDF document. When I made this LabVIEW program it was Acrobat Reader 5.0.5 that was installed on the PC. Lather when the Acrobat Reader was upgraded to version 6.0, there was an error when VI tries to launch the LabVIEW program. And Later again when we upgraded to Acrobat Reader 7.0.5 I must again do some changes and rebuild the EXE files again
It isn't so very big job to do the changes in one single LabVIEW program, but we have built a lot of LabVIEW programs so this take time to due changes every time vi update Acrobat Reader. (We have build EXE files.)
The job is to right click the ActiveX container and Click "Insert ActiveX Object", then I can brows the computer for the new version of acrobat Reader. After this I must rebuild all the "methods" in the Activex call to make the VI executable again.
Is there a way to build LabVIEW program so I don't have to do this job every time we update Acrobat Reader?
This LabVIEW program is written in LabVIEW 6.1, but I se the problem is the same in LabVIEW 8.2.
Jan Inge Gustavsen
Attachments:
Show PDF-file - Adobe Reader 7-0-5 - LV61.vi ‏43 KB
Read PDF file.jpg ‏201 KB
Show PDF-file - Adobe Reader 5-0-5 - LV61.vi ‏42 KB

hi there
try the vi
..vi.lib\platform\browser.llb\Open Acrobat Document.vi
it uses DDE or the command line to run an external application (e.g. Adobe Acrobat)
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How can I read a file with ASCII Special Character into a SQL table using SSIS 2008?

I've tried everything to read this file and am getting no where. Help how can I read this file and load a SQL table?
RS - AscII - 30 (Record Separator)
GS - AscII - 29 (Group Separator)
Thank you for your assistance - Covi
Mark Covian

We can use script component as source/transformation to read the text file and assign the contains to a string. Split the string by chr(30) i.e RS and finally stored into an array or write to the output buffer of the script component.
For example on how to use script component refer this link
http://social.technet.microsoft.com/Forums/en-US/6ff2007d-d246-4107-b77c-624781baab38/how-to-use-substring-in-derived-column-in-ssis?forum=sqlintegrationservices
Regards, RSingh

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files.

Hi there, I need to be able to read raw files from an Olympus Stylus 1 via CS5 and Lightroom 4. I have downloaded Raw file plug-in v 6.7.1 but still can't read the files?

Read this table http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
The Olympus Stylus 1 was first supported in Camera Raw 8.3 which is only compatible with CS6 and CC.
It is not compatible with CS5 or older and never will be.
If you do not want to upgrade to CS6 or CC then you can dwonload the free Adobe DNG converter, convert all Stylus 1 Raw files to DNGs then edit the DNGs in CS5.
Camera raw, DNG | Adobe Photoshop CC

Aperture 3 can't read .CR2 files Canon 5D

Similar Messages

Maybe you are looking for