Aperture 3 creating duplicates
i have just upgraded to Aperture 3. I love the new tools, but still getting use to organization of files. A3 seems to be doing weird things. As i started to delete some masters in a newly created library project, it creates 2 duplicates of some of the images in that project. When i trash them , it creates duplicates in subsequent images. What is going on ????
pam
This is a year-old thread. You'd be better served to start a new thread.
This page from the User Manual should help you find the "Do Not Import Duplicates" checkbox. The User Manual is available on-line, and should be your resource of first recourse. I searched for "Duplicates import"
Aperture, in identifying duplicates, scans for file name and date. If you change the file name on import ("Rename Masters"), you will get duplicates.
The original thread is about Aperture showing duplicates for photos edited in iPhoto (afaict), which is a misunderstanding of Aperture's behavior.
Message was edited by: Kirby Krieger -- clarifications.
Similar Messages
-
Importing iphoto library into Aperture 3 creates duplicate events
I am so hoping you can help me here.
I started importing my iphoto library that was going well to a point it stopped importing. Looking at Aperture i can see project folders that coincide with the iphoto events but not all of them came across, still not a problem. I choose to import the iphoto library again checked the box to not import duplicates, now the problem, it starts downloading the same library and the same events.
ABOUT TO PULL MY HAIR OUT, HELP IF YOU CANYour iPhoto Library may need rebuilding. If you have iPhoto '11 try the following:
First back up your iPhoto Library.
Then lauch iPhoto in "Rebuild" mode by holding down the command and option (or alt) keys when launching iPhoto.
From the "rebuild" panel choose: Rebuild iPhoto Library Database from automatic backup.
Then try again to import into Aperture.
Delete the previous iPhoto imports before you try that, for the "Do not import Duplicates" option does not work recently.
Report back, if this should not work for you. -
How do I combine two iPhoto libraries into one without losing pictures or creating duplicates?
How do I combine two iPhoto (iPhoto 09) librairies into one without losing pictures or creating duplicates?
Two ways - use Aperture or use iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
LN -
I have a macbook pro from fall 2010. I have been using my external HD as my primary itunes folder for the past 7 yrs ( i.e it is organized by itunes default categorization, etc). However, there is some overlap between my external HD itunes folder and my comps original itunes folder (probably 20-30% of my current library's media files were already duplicated there from when i first bought the HD and transferred files to the external, however they are mostly referenced from the external now). Also there are files in the comp's itunes folder that are not on my external (probably due to organizational mishaps and podcast downloads when not connected to the external, etc). I do not know how many files this is the case for.
Recently, i decided that i wanted to consolidate all of my itunes music into one concise folder on my macbook's HD to avoid these issues going forward. I also just bought a new external which i will use to back up my comp's itunes folder once i consolidate everything to the comp. But i plan on using the itunes folder on the comp going forward or at least using the consolidate fcn to avoid these issues.
Here is my dilemma. Prior to learning of the consolidate feature today, I changed the default itunes folder in settings to the original itunes folder on the macbook and then manually dragged all of the media files from my external itunes folder to the macbook's itunes folder. There were a ton of duplicates or overlapping folders with similar artist names, so i opted to have them merge all folders where possible. After doing this, i realized the itunes library still references these files that i dragged and dropped from the external since that is where my default itunes folder used to be. At that point i then read and learned of the consolidate itunes feature which seems like the best way to do this. But i am afraid that if i consolidate my library to my macbook's itunes folder now, will it create duplicates of the 4000 + media files i just dragged to the macbook's itunes folder which are already in the itunes library but being referenced from the old external??
Question: Is there a way that i can make these files i just dragged to the macbook's itunes folder become the ones referenced by the itunes library through the consolidate feature without creating duplicates of these 4000+ files? I want to avoid having three copies of these files (two duplicates in the itunes and the originals on the external). Furthermore, is there a best way to find out which files in the macbook's itunes folder are not being included in the library after consolidating everything to the computer's HD? Then after that, what is the best way to start backing this all up to my new external, so that this overlapping issue doesnt happen again? Im assuming i just need to make sure to consolidate first when changing itunes folders going forward. Thank you. I know that was a lot to read but hopefully someone can help with this issue.In general:
- The best way to check if files are in a library is to drag the whole media folder to the library. If something was missed it will be added. If it is in the library is won't be added a second time.
- If you have a second copy of a file and iTunes does not currently list that specific file in its database then even if it is identical to one already in the database it will add it a second time. So if you have file xyz on the internal drive and the external drive and add them to iTunes you will end up with two entries for the same thing in iTunes because you really do have to copies of the files. While this can happen with two copies on a single drive, it will almost definitely be the case when you have a copy of a file on two drives because iTunes really sees them as two different things.
-Unless you know how iTunes works, avoid moving files yourself. Let the consolidate feature do all the file moving. Manually moving files can really mess up iTunes unless you know what you are doing and have iTunes set to not try to do it itself.
- There's no clean and easy way to delete duplicates. The best thing is to change practice so you don't create them. Here are references:
How to find and remove duplicate items in your iTunes library - http://support.apple.com/kb/HT2905
http://dougscripts.com/itunes/itinfo/dupin.php (commercial)
Posts by turingtest2 about different types of duplicates and techniques- https://discussions.apple.com/thread/3555601 and https://discussions.apple.com/message/16042406 (Note: The DeDuper script is for Windows)
http://www.hardcoded.net/dupeguru_me/ -
I have 4 Macs and I had the same iPhoto library on each of them. When I chose to turn on the iCloud Photo Library on each of them, each Mac, each one of them uploaded the library to iCloud Photo Library.. Now it appears that I have many duplicates in the new Library. Is it adding each of the 4 libraries to the mix? It's a real problem as I have 25,000 pictures - 70GB in my library. So paused the upload on 2 of the Macs about half way through in case it is creating duplicates, until I get some answers. Any help would sure be appreciated.
I'm in the same boat as well. I'm doing one mac at a time and seeing how it works. Howev the upload is so slow, who knows when it will be done.
-
Error in creating Duplicate Database in same server..
Hi,
I am getting following error when creating duplicate database
DB Version=10.2.0.4
$ rman target sys/sys@test nocatalog auxiliary /
Recovery Manager: Release 10.2.0.4.0 - Production on Mon Sep 28 15:13:32 2009
Copyright (c) 1982, 2007, Oracle. All rights reserved.
connected to target database: TEST (DBID=1702666620, not open)
using target database control file instead of recovery catalog
connected to auxiliary database: CLNTEST (not mounted)
RMAN> DUPLICATE TARGET DATABASE TO "CLNTEST";
Starting Duplicate Db at 28-SEP-09
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: sid=156 devtype=DISK
contents of Memory Script:
set until scn 597629461;
set newname for datafile 1 to
"/u01/data_new/clonetest/system01.dbf";
set newname for datafile 2 to
"/u01/data_new/clonetest/undotbs01.dbf";
set newname for datafile 3 to
"/u01/data_new/clonetest/sysaux01.dbf";
set newname for datafile 4 to
"/u01/data_new/clonetest/users01.dbf";
set newname for datafile 5 to
"/u01/data_new/clonetest/example01.dbf";
set newname for datafile 6 to
"/u01/data_new/clonetest/undotbs02.dbf";
set newname for datafile 7 to
"/u01/data_new/clonetest/alweb1.dbf";
set newname for datafile 8 to
"/u01/data_new/clonetest/indx1.dbf";
restore
check readonly
clone database
executing Memory Script
executing command: SET until clause
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 28-SEP-09
using channel ORA_AUX_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/28/2009 15:13:40
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 8 found to restore
RMAN-06023: no backup or copy of datafile 7 found to restore
RMAN-06023: no backup or copy of datafile 6 found to restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
RMAN> crosscheck backupset of datafile 1;
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=154 devtype=DISK
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 2;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 3;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 4;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 5;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 6;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
RMAN> crosscheck backupset of datafile 7;
using channel ORA_DISK_1
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u01/rmanbkp/db_prd0akqcnoh_1_1 recid=10 stamp=698769169
crosschecked backup piece: found to be 'AVAILABLE'
backup piece handle=/u02/data/flash_recovery_area/BINGO/backupset/2009_09_28/o1_mf_nnndf_TAG20090928T151044_5d114x0h_.bkp recid=17 stamp=698771444
Crosschecked 2 objects
Thanks,Hi,
RMAN> show all;
using target database control file instead of recovery catalog
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/oracle/ora10g/product/10.2.0/db_1/dbs/snapcf_TEST.f'; # default
Thanks, -
CUSTOMER_REL - Business partner not created; duplicate check on address
Hello Colleagues
I have a problem during CUSTOMER_REL replication from ERP to CRM.
In r3am1 object looks fine but in some BDoc following error appears:
Assignment person - address exists already
Message no. AM038
and the Business Partner for Contact Person is not created.
We are on:
SAP_ABA 701 0005 SAPKA70105 Cross-Application Component
SAP_BASIS 701 0005 SAPKB70105 SAP Basis Component
PI_BASIS 701 0005 SAPK-70105INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BS_FND701 0005 SAPK-70105INSAPBSFND SAP Business Suite Foundation
SAP_BW 701 0005 SAPKW70105 SAP Business Warehouse
SAP_AP 700 0018 SAPKNA7018 SAP Application Platform
WEBCUIF 00 0005 SAPK-70005INWEBCUIF SAP WEBCUIF 700
BBPCRM 700 0005 SAPKU70005 BBPCRM
BP-CRM70 700V1 0000 SAP Best Practices for CRM 7.0
BP-INSTASS 600V7 0000 SAP Best Practices Solution Builder
ST-A/PI 01L_CRM5700000 Application Servicetools for CRM 500 51
And have already applied
1394635
1396910
1397895
1410788
1438046
But it is seems problem lies on SAP_ABA as I have found note
1092089 - Business partner not created; duplicate check on address
which is valid for different BP role and
SAP_ABA 700
SAP_ABA 710 but not for our 701
Have you ever seen similar issue?
Thanks in advance
MichalHi Naresh,
Thanks for reply. Correction instructions from this note refer to METHOD MODIFY_CONP_ADDRES which doesn't exist in crm7.0.
I can see in CRM that contact person is replicated and is present in BUT000 but table BUT052 is empty for this contact.
What is more we have implemented in our CRM note 564538 To change Contact Persons grouping replicated from ECC to CRM.
But also have: Note 757955 - Incompatible change concerning CRMC_BUT_CALL_FU.
We checked as well
Note 609766 - Correction of BP GUIDS in CRMM_BUT_CUSTNO, BUT000, CRMKUNNR
Note 836353 and run reports to find inconsistencies in tables BUT052, BUT051, ADCP and ADRVP. However no inconsistencies were found.
Thanks in advance if you have any other idea.
Cheers,
Michal -
How to make iTunes add a folder without creating duplicates?
Hello,
I have a PC running windows 7. I keep all my music in one folder on a NAS device. I am getting more and more fed up with Windows Media Player (WMP) and I would like to move to iTunes. This move, however, appears to be as painful as using WMP. Please help if you can. I have used iTunes before so I have an existing music and video library and I also have a number of playlists both with music and videos. I cannot afford to start from sratch, i.e., to remove and readd everything; it would be too costly. I have two major problems with iTunes:
1. When I try to add files that already exist in the iTunes library iTunes happily adds these file and creates duplicates. I cannot find a knob that would prevent iTunes from creating these duplicates and simply ignore any found files if they are already present in the library. All such duplicates point to the same file on disk. I am really scratching my head over this as I would think that this would be a very basic thing to do/allow, yet it does not seem to be possible. Is it me missing something simple here or is it Apple telling me that this is how it must be...???
All I want to do is to add the top folder that contains all my music without having to deal with thousands of duplicates. I cannot add the files one-by-one because there are too many of new files there and if I remove all the files and re-add them all my lists will likely become empty (tried it on one list and, as expected, the list got emptied once I removed the files that were in the list). Hmm, is this asking for too much? Please help.
2. I do not seem to see a way to tell iTunes to monitor for new media files. WMP allows you to specify folders to monitor. You add a file to the folder and the file gets added to the library. What is wrong or bad with this concept (other that it would not work if duplicates were handled)? Why does iTunes not seem to support that?
Thank you,
Petertt2, thank you for your reply. Let me restate your answers the way I see them.
Problem #1: You said that "iTunes only creates duplicates if you ask it to...". Well my goal is not to create duplicates but to avoid them and the problem with iTunes is that it does not seem to offer an easy way to do this. Do not get me wrong, I like iTunes but let's call black black and white white. So the way I read your answer is: no iTunes does not support a way to add the same folder twice without creating duplicates.
Problem #2: The answer to the second question is also no, iTunes does not offer any way to monitor for new files in a folder or folders.
I wish the above were incorrect but from what I hear and from what your wrote I conclude iTunes does not support any of that.
You offered external to iTunes solutions for both problems. Thank you for that! I did not know about this tools. Having said that my iTunes music files are on a NAS device (files not copied to iTunes library), my video files are on NAS but (because of the necessity to convert to iTunes supported format) they were transcoded and stored in iTunes library, my iTunes Store purchases (music) are in the iTunes library and on the NAS (backup - likely duplicates). In short it gets messy very quickly and after reading the NAS and multi-path warnings for the DeDuper tool I am just not jumping on the idea of using it - there would be physical duplicates and I would not want any physical files to be deleted. tt2, do you know if the DeDuper offers a mode where it would present the user with a list of duplicates and allow the user to decide which dups to remove before doing anything? I basically would want to remove the dups from the library but without deleting any physical files.
I will have a closer look at the iTunes Folder Watch program. Unless I am misinterpreting something I think it should do what I want to do.
So again, thank you for your answers and suggestions with the external tools. It is just too bad that iTunes does not support what I (and many others) need natively.
Peter -
How do I move/copy contacts from Entourage to iCloud Address Book without creating duplicates? Address Book on Mac, iCloud, iPhone and iPad is now empty
Thank you for letting me know!
Going to give it a go. Had a back up of all my clients files stupidly not my software as I have the originals disks. Just realised that amongst the software is ibiz and have lost al my accounting and billing files for the last 7 years want to cry so losing my contacts now will really tip me over the edge!
Fingerscrossed this works! -
Data loader : Import -- creating duplicate records ?
Hi all,
does anyone have also encountered the behaviour with Oracle Data Loader that duplicate records are created (also if i set the option: duplicatecheckoption=externalid) When i am checking the "import request queue - view" the request parameters of the job looks fine! ->
Duplicate Checking Method == External Unique ID
Action Taken if Duplicate Found == Overwrite Existing Records
but data loader have created new records where the "External Unique ID" is already existent..
Very strange is that when i create the import manually (by using Import Wizard) exactly the same import does work correct! Here the duplicate checking method works correct and the record is updated....
I know the data loader has 2 methods, one for update and the other for import, however i do not expect that the import creates duplicates if the record is already existing, rather doing nothing!
Anyone else experiencing the same ?? I hope that this is not expected behaviour!! - by the way method - "Update" works fine.
thanks in advance, Juergen
Edited by: 791265 on 27.08.2010 07:25
Edited by: 791265 on 27.08.2010 07:26Sorry to hear about your duplicate records, Juergen. Hopefully you performed a small test load first, before a full load, which is a best practice for data import that we recommend in our documentation and courses.
Sorry also to inform you that this is expected behavior --- Data Loader does not check for duplicates when inserting (aka importing). It only checks for duplicates when updating (aka overwriting). This is extensively documented in the Data Loader User Guide, the Data Loader FAQ, and in the Data Import Options Overview document.
You should review all documentation on Oracle Data Loader On Demand before using it.
These resources (and a recommended learning path for Data Loader) can all be found on the Data Import Resources page of the Training and Support Center. At the top right of the CRM On Demand application, click Training and Support, and search for "*data import resources*". This should bring you to the page.
Pete -
Is there a way to replace tags on import rather than create duplicates??
I use the tag engine to connect with the KEPWARE OPC server program and at times I want to change how the tags are located inside KEPWARE but keep the same tagnames inside LABVIEW. I export the .scf file and modify it inside EXCEL. When I import it again it will create duplicate tagnames. When you have 4000-8000 tags, it can take awhile to delete the duplicates. It would be great if we could replace the existing tag name data. Maybe I should be creating a vi to modify the properties of individual tags instead. How does anyone else work around this issue??
I would export all of the tags and then modify the ones that need to be modified. Then, before I import them, I would create a new scf file. This way there are no duplicates.
-
How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?
Hello!
How do I prevent Lightroom from creating duplicates if the edit in photoshop is not saved?
So... Quite often I choose to 'Edit in photoshop' from Lightroom but then end up not saving the result. (for example, because I just wanted to experiment with the photo, or I'm not satisfied with the results)
However, Lightroom always creates a copy of the original photo, which stays in the catalog even if the photoshop changes aren't saved.
Is there a way to stop this, and only add a photo if it has been edited in PS?
Using LR5 with PS CS6 on a Mac 10.9
THANK YOU!Select 'Open the Image in PS as a Smart Object'. The image will be rendered by ACR in memory without being written to disc until you save it from within PS.
-
ITunes won't stop creating duplicates and triplicates in my library!
My issue is that iTunes is creating duplicates of my songs. Over and over and over again. I have the preferences set so that it is saving everything in one folder, etc. It still happens. In fact, not only are there duplicates, there are 4 and 5 copies of songs. I've gone and deleted the duplicates, and then when I go to play the remaining file out of the library, it says it can't find it.....it's really bizarre. At first it wasn't that big of a deal, but now I have several gigs of hard drive space taken up by duplicate songs. It's a nightmare.
Here's some additional info about my setup; I hope this helps.
Windows XP Home OS
iTunes version 7.7 (was also happening with previous versions)
I store all of my music on an external Maxtor USB hard drive
I periodically sync my iPod classic
I occasionally use Airtunes
Please help! Anybody?!?!did you ever figure this one out? my album folders contain one set of duplicate music files in them. glad it's only one set of duplicates at this point, but that's still double the pain in the a**.
i could spend an hour or two "fixing" this, but i dont want it to happen again... -
I tunes match is creating duplicates in my library
I tunes match is creating duplicates in my library
As stated above you can still add your artwork manually:
iPod & iTunes for Dummies - Adding Album Cover Art or Images in iTunes
Add Song Information, Lyrics, and Artwork to My Tunes
iTunes: How to Add Artwork to Songs
If you have an iPod make sure it is enabled to show the artwork.
A tip for finding suitable artwork is to go to Amazon, locate the album, save the picture to your desktop and drag it to the iTunes artwork pane. Another way would be to locate artwork using Google image search and put the artist or album name and save the picture you find there in the same way. There are also some programs like this one: iTunes Art Importer or MP3 Tag -
'Show Mac Contacts' creates duplicates
NOT SOLVED AS OF - July 10, 2015 Does ANYONE know how to solve this issue: Checking the 'Show Mac Contacts' in Skype Preferences creates duplicates of all my address book contacts. I've searched the forums and there is a moderator who has offered a 'solution' to this on a similiar threads:http://community.skype.com/t5/Mac/Duplicate-Mac-contacts-in-Skype/td-p/2034871However many people, including myself, have responded that the problem has not been solved. Yet any similiar questions have been archived and this answer given as a solution. Anyone have a sloution?? Thanks for taking the time to read, and possibly offer a solution to all the users who are encountering this problem. :
I am using Outlook 2007 on my PC.
I am not using Mobile Me; rather I am running the sync on my PC using iTunes. The duplicates were on both my iPhone and my computer, but they didn't always appear to be identical. It is somewhat complicated by the fact that I use Plaxo to update my contacts folder(s) on my PC.
I worked with Plaxo to combine all contacts folders, and then I went through each item and deleted all duplicates. Then I synced with my phone, and finally got it down to one unduplicated list. This was tedious, since I have over 1,000 contacts.
Now I am getting ready to sync, and I am not sure what to check on the sync menu. It asks whether I want contacts added on the phone synced to my Collected Contacts folder. Why add it to a separate folder instead of my main contacts folder? Does this add a separate item that you then use to update the main folder?
Thank you and sorry for all the questions.
Maybe you are looking for
-
Error while Adding user to 'SunAccessManager' Resource
Hi, I configured SAM Resource adapter in SIM 6.0. When I create a user and assign SAM Resource getting the following Error, com.waveset.util.WavesetException: An error occurred adding user 'uid=SIMUser2,ou=People,o=Employee,dc=nl,dc=dap,dc=com' to re
-
Which is better or 'standard' option for a Delta DTP request
Hi folks, I am creating a delta DTP for loading HR Payroll data. While creating the DTP I see two options a) Only Get Delta once b) Get all new data request by request which is a better option if I have a lot of records to upload for ever
-
Finder window on Mac won't scroll horizontally in Muse
I noticed that anytime I open a finder window through Muse (i.e. replace image), the finder window's scroll bar only scrolls so far. I have to resize the window to view other columns. This appears to be a new bug, as it was working normally in th
-
My usb cord won't connect to my macbook air
Whenever I plug my phone into the USB cord and then into the Macbook Air, it won't connect! The phone vibrates and I can't sync music or photos! We replaced the Macbook and this is still happening, then we replaced the USB cord with one that we bough
-
Video freezes but audio continues
Help! I have been having this problem for a couple of weeks now. It seems to happen randomly. I will be watching a video on YouTube for example and then the video will freeze and the audio will continue. The only way out is to do a system reset. I ha