Aperture 3 display wrong image while editing (video example)

Aperture 3, clean install, running on an upgraded Aperture 2 library. Whenever I make a change to a photo, Aperture displays the previous photo on the screen. It correctly edits the photo I have selected, it just displays the wrong image while doing so. Anyone else have this issue?
Video: http://www.youtube.com/watch?v=4bRI9xFBEKI

It seems you have a rare problem.
If the advice already given regarding upgrades fixes thing then all well and good.
If not you might try Matthew Bergsmas tip in:-
http://discussions.apple.com/thread.jspa?threadID=2357072&tstart=0
This reads as follows:-
Go to the finder and move everything in these folders to the trash:
Hard Drive/Library/Caches
Hard Drive/System/Library/Caches
Hard Drive/Users/Your username/Library/Caches
Then reboot.
=====
Aperture will rebuild the caches but give it time.
AW

Similar Messages

Extreme Lag While Editing Videos

Hello everyone, my first topic. On iMovie I get lots of lag while trying to edit videos of any length-EVERYTHING lags. In activity monitor the CPU usage sometimes even goes over 100%. Now the lag is not just when I try to put different videos together, but even when I only have the default slides things (the things you can select under the "T" button). I get lag with other apps as well, but iMovie is by far the worst.
If it helps, I'm using iMovie 09' version 8.0.6.

Vincent2128 wrote:
... I get lag with other apps as well, but iMovie is by far the worst.
hard to tell form remote ...
slow-responding apps could have two main reasons:
• not enough room for 'breathing' on internal hard-drive; any MacOS-app 'swaps' hidden files while processing onto the internal drive (if partitioned: the MacOS partition). keep at last 15-25GBs free!
• 'wrong' installation, usually done by cloning an old/'alien' set-up from some backup onto a newer/different Mac.
and, Welcome, Vincent2128, to the  boards ...

How to display flash controlbar while playing videos on Oracle Apex 3.2.1?

Hi,
I´m developing an APEX application that displays Flash videos on a html page.
I could display the video, but without the flash control bar (PLAY, STOP, PAUSE, SOUND VOLUM, etc).
I´ve created an HTML region on a page with de following code:
<body>
<embed src="#WORKSPACE_IMAGES#lixao.swf" width="440" height="280" controller="true" align="middle" quality="high" loop="false" name="player" hidden="false" allowScriptAccess="sameDomain" allowFullScreen="true" type="application/x-shockwave-flash"
controller="true"
pluginspage="http://www.macromedia.com/go/getflashplayer/">
</body>
Could someone help me and explain what´s wrong with the code above?
Best regards,
Sergio Coutinho

Couple things here..
Please change forum name to something more friendly..
Please when posting, include such information as database version, APEX version
Also, I do NOT believe you need to include the <body> tag when building your region....
Modify this with your required paths and file names:
<object clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload. macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,16,0"
width="400" height="200" id="stage1" align="" >
<param name=movie value="stage1.swf"><param name=quality value=high>
<embed src="/i/flash/stage1.swf?clickTAG=f?p=&APP_ID.:9:&SESSION.::NO::" quality=high width="400" height="200" name="stage1" align=""
type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer">
</embed></object>
{code}
Thank you,
Tony Miller
Webster, TX
While it is true that technology waits for no man; stupidity will always stop to take on new passengers.
If this question is answered, please mark the thread as closed and assign points where earned..

Displaying an Image over a Video

Hello everybody !
I have a little problem: I want to display an mx:Image over a
mx:VideoDisplay object. So, I use "myVideo.addChild(myImage);" but
it doesn't work: the image isn't displayed. I tried using
addChildAt in order to put the image at the front but it doesn't
work either.
I'm probably doing something wrong but I can't find what it
is.
I've tried the same thing with a button instead of an image
and it works.
Does anyone have an explanation ?

Yann,
I'm trying to do the same thing. Did you ever figure it out?
What I really want is to put a poster frame on the video but it is
not clear I can do that in Flex Builder

Outlook 2013 with SSRS charts in MHTML displays wrong image in email

Hi,
I've posted this question already to the SQL Server group and the SQL Team confirms this is potentially an issue with Outlook 2013 and image cache changes between 2010 and 2013. Please see the more detailed post here for more information: https://social.msdn.microsoft.com/Forums/sqlserver/en-US/e34516c5-53cd-4792-bc6d-4cb6e41e63cf/ssrs-2012-with-mthml-subscriptions-graphs-and-outlook-cache-issues?forum=sqlreportingservices
In short, when changing between emails that display charts from SSRS distributed via MHTML, Outlook 2013 will display the wrong graph from its image cache. This issue does NOT happen when opening the email in a browser by using the "View in Browser"
option from the Information ribbon in the email.
The issue began after upgrading from Outlook 2010 to 2013 so it would appear that the image cache algorithm has changed. We need a resolution to stop this from happening that does not include turning off cached exchange mode. I've tried changes
in the Trust center by turning off the viewers but that doesn't fix anything.
We are using Office 365 and Outlook 2013 x64 SP1.
Has anyone else experienced this or found a workaround for the issue? This is what it looks like when clicking between emails and then opening in the browser.
Thanks,
Kevin

Outlook uses Word as an email editor. That's why you may see the difference between the browser and Outlook inspectors. See the following series of articles for more information:
Word 2007 HTML and CSS Rendering Capabilities in Outlook 2007 (Part 1 of 2)
Word 2007 HTML and CSS Rendering Capabilities in Outlook 2007 (Part 2 of 2)

MacBook Pro retina display goes black while outputting video through HDMI to external monitor??

I frequently connect my MacBook Pro to my 42inch Panasonic TV to watch movies/videos. I use VLC media player for all my playback. The problem I'm running into is that when I put VLC media player into fullscreen mode on my external display, my retina display goes black (I can still see the finder bar at the top and when I mouse down the dock appears but the rest of the display shows all black. If I click on Safari it will open but I can't see it on my MacBook display unless I take the external display out of fullscreen mode.
I would still like to be able to do things on my MacBook while video is playing. I've played around with the display settings but they're pretty limited and I can't figure out how to get it to work the way I'd like. I've seen people having up to 3 or 4 displays hooked up, I'm just trying to hookup one. I would consider this a severe limitation of OS X if I'm not able to separately manage the displays. Hopefully there is a setting or something I'm just not seeing. Thanks.

Yeah, fullscreen mode still doesn't play nice with multiple monitors. The common workaround is to stretch the window out to the edges of the screen instead of using actual fullscreen mode.

CPU Usage % While Editing Video

We get quite a few questions on why CPU usage is below 100% in some operations. This applies to both PrE and PrPro. Here is a THREAD (on PrPro, so there are some Pro-specific comments involved in the thread), and Harm Millaard has distilled the possibilities nicely in Reply #1.
Note: there is a link to the PrPro CS5 Benchmark. The site, and benchmark files and tests are not available for PrE, but when comparing hardware, the spreadsheet of the performance data from users' configurations, can tell one a lot, even if they are running PrE, and cannot actually participate in the benchmarking - the data in that spreadsheet is still VERY useful, when looking at various computer configurations.
Good luck, and hope that this helps others,
Hunt

1) Why video rendering is taking about 3h to render 2.2Gb wma file to make it HD 720p 29.97 with H.264 codec? CPU is loaded only 16-20%, have alot of RAM. Ou and tried both OpenCL and system only renderer no change in time needed or CPU load.
Because of the source material and the hardware. Wrong CPU, video card an not enough memory.
2) Does Mercury Playback Engine GPU Acceleration (OpenCL) means GPU usage mostly and system only - CPU usage?
Exporting is CPU based, the Radeon does not help at all. Tweakers Page - Exporting Style
3) Why is so low CPU usage I thought that doing something big like video editing CPU should be fully loaded..., but here I see that it as I said is using only 16-20% and 2-3 cores aren't even in use.
Again because of the source material / codec and the hardware. Typical of ill-threaded codecs and the CPU.
4) Is it ok for a recorded game video to be big like 2-5Gb after rendering in HD format, because I think if films 44 min HD quality are 350-400MB than game videos should be about the same.
44 min. of HD material can never be 350-400 MB of decent quality. 44 min of SD material (DVD) is already over 3 GB for decent quality. For HD, even on YouTube, count on at least 4-5 GB for 44 minutes or more.
5) Maybe there is a better video capture app than Fraps, Overwolf, raptr GVR (well looked fine but I couldn't edit the video, Adobe element showed black screen and played audio) so that I could easelly edit it with adobe apps.
You can't capture with any of the software you mention, Capture is only possible with tape cased cameras over firewire.
Your AMD 8-core CPU is not suited for video editing, it is even slower than a 4-core Intel, because of the lacking SSE support. See Tweakers Page - What kind of PC to use? Your Radeon is pretty slow for editing, Tweakers Page - What video card to use? and the amount of memory is limited.

How do I take advantage of high frame rates while editing video in iMovie '09?

I have a GoPro Hero2 Hi-def video camera. It's capable of shooting up to 120 frames per second. How can I take advantage of that smooth slo-mo in iMovie '09?

hi kyle,
sorry, but just to elaborate on your response a little while ago here:
- i captured the 24PA footage using the advanced pulldown
- i captured the 24P footage using no pulldown
- i am editing in a 29.97 timeline now, as most of my footage was shot with 24P
please let me know your thoughts on how i should go about working with this footage!
thanks!
steven

Reduce noise while editing video from Cannon 550D

Hi Guys,
I recently purchased a Cannon 550D and with that a 50mm 1.4 USM lens for my short film that I would be filming because I was on a budget and this was one of the better Video Dslr's out der!
Anyways the video quality in meduim to good lighthing is amazing but when it comes down to low-light I see a lot of noise in the final product so wanted some help.
In low-light I make sure I dont go over ISO 400, well I could do IS0 200 but then the video image gets dark because of the lack of good light so ISO 400 is what I do and the Apperture is at 1.4 with the shutter speed at 1/30.
Couple of points I have noticed..
The video from the camera exports out in H.264 format but as you know editing with that codec is not very smooth,so I convert it to any one of the apple codecs (Apple pro res 4444 or Apple Proxy etc) and when I do that the picture quality goes bad, I mean the video becomes a shade darker and I suspect that it created some noise.
Can you help me with any workarounds?
-A

>I'm actually using embedded FireWire on the motherboard. I do have a PCI FireWire card, so that's worth a try as an alternative - I forgot about potential motherboard issues with embedded controlflers.
If you do that, it's worth noting what MOTU have to say about it:
>MOTU recommends using strictly FireWire PCI/PCMCIA cards based on the Texas Instrument chipset.
Very specifically, they say:
>There's an incompatibility between the NEC chip found in some FireWire cards and the MOTU FireWire line of interface.
I have a Belkin PCMCIA Firewire card with a Texas chipset, and that works fine. I also have a card with a VIA chipset, and whilst it's okay, I get the impression that the Texas one is more stable - had at least one unexpected crash with the VIA one. One one desktop machine I actually bought a Firewire PCI card
after reading MOTU's advice(!) and with those, it's relatively easy to get the right chipset if you look carefully.

Why does Adobe Premiere keep crashing while editing video footage?

Every time I open Adobe Premiere to edit my video, the program crashes and I receive the message below.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Dual video problems - do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
-Mac Utility http://forums.adobe.com/thread/1017891?tstart=0

How to display the image while set custom header "x-content-type-options" as "nosniff" in web.config

Hi,
I am using Microsoft ASP.NET TreeView control where I have bound embedded images. Also I have set custom header “x-content-type-options” as
“nosniff” in web.config file.
On hosting the sample containing the above mentioned things in SERVER machine, the images are not visible but its working properly while running sample in local (development) machine.
Kindly provide a solution and find the sample in the below link.
http://goo.gl/6uR2b0
Thanks,
Alagarsamy D.

Hi AlagarBala,
Your issue is related to asp.net/web technology and for a better support on this please post your question to the asp.net forum below, this forum is for C# code issues in speicific:
http://forums.asp.net/
Regards,
Fouad Roumieh

Lost audio while editing video

I lost my volume while ediing my video, I checked my volume and it wasn't muted, what else can it be?

Llamadude99
This morning I replied to your follow up where you told of your success and overcoming your audio issues for your Premiere Elements project. But, after I replied to your news of success, I could not find your latest post nor mine in your thread.
I finally found them, but in the old 2013 thread of another. Here is the copy/paste from the 2013 thread to your thread here
17. Llamadude99,
02-Mar-2014 22:30    in reply to A.T. Romano
Report
I was trying different things and I went to tools to narration. I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video. Very strange but it worked. I wanted to thank you for taking the time to try to help me with this situation.I really appreciate it.
Was this helpful? Yes    No
Reply
|                        Translate
      10,418 posts
30-Apr-2006
18. A.T. Romano,
03-Mar-2014 07:38    in reply to Llamadude99
Llamadude99
Thanks for the update.
Later today I am going to try to get narration to cause the rest of the audio to fail. If I can, I will try what you said worked for you, that is,
I removed the mute audio before recording, then deleted the narration I previously did and then pressed undo, to bring it back and my audio returned on my video.
If this works, it may be the answer to this type of situation, and it will be a major contribution to the Premiere Elements community.
Congratulation on your success. Great job.
Best wishes to your daughter, her cousin, and you.
ATR

Apple Mail 7 displays wrong image previews

I have an IP camera that sends a series of snapshots when it detects motion. These e-mails land in my IMAP account. All the e-mails have the same subject and the attachments are similar in name, but have the date & time in the file name (and therefore are unique).
When I display a message with attached images, Mail shows the images from a different (earlier) message. However, if I right-click one of the incorrect images and select "Open Attachment," Preview opens the correct image.
It appears that Mail.app is getting the previews mixed up.
Has anyone else seen this behavior?

I wonder if this is the same problem that I encounter:
I receive faxes in my inbox as tiff files and before Mavericks I could view them properly in-line .. but now only the first one I go to displays correctly .. all other received faxes show this same image.
If I "open" the attachment it is properly displayed .. but in-line it is always the same image that displays .. the first one that I go to when opening Mail.
As far as I can see it is only tiffs sent by my fax-to-email service that show up improperly .. other in-line attachments such as PDF's seem unaffected and display correctly.
I thought that it was related to the coverflow issue that was fixed by the 10.9.1 update .. but no such luck.

CS4 :Green Overlay image at edited video ???

This is the situation I have here
I want to remove the Green(or any colour) overlaid area(the video should not have it in the first place).
Please Advice.
Thanks

You might want to see the links in this THREAD. Usually, the issue HAS been a video driver, but some have had to roll back from the newest.
Good luck,
Hunt

Display an Image Over a Video

Hello,
I need to animate an image over an avi file playing. The problem is the image always is behind the file. I am using Swing for this, the JDesktopPane and the RootPane. Any help appreciated.
Thank you.

Hi,
Here is the code but it still seems not to work.
JDesktopPane layeredPane = new JDesktopPane(){
public Dimension getPreferredSize() {
return new Dimension (300,250);
public Dimension getMinimumSize() {
return new Dimension (300,250);
ImageOverlay Image overlay = new ImageOverlay(); // this is a label
overlay.setBounds(10, 100, 50 , 75);
overPanel.add(overlay);
overPanel.setOpaque(false);
overPanel.setBounds(10, 100, 50 , 75);
layeredPane.setDoubleBuffered(true);
getRootPane().setLayeredPane(layeredPane);
Manager.setHint(Manager.LIGHTWEIGHT_RENDERER, new Boolean(true));
getRootPane().getLayeredPane().add(visualComponent, new Integer(0));
getRootPane().getLayeredPane().add(overPanel, new Integer(1));
Thanks.

Aperture 3 display wrong image while editing (video example)

Similar Messages

Maybe you are looking for