Aperture 3 exporting problems

Seems that every time I try to export a file from Aperture 3, it hangs for a long time before it performs any exports - it is very slow. In Aperture 2, exporting a file that was 900x600 @ 72 dpi was instant, in Aperture 3 the same file takes 15 minutes - 4 files = 1 hour.
Anyone know how to fix?

Hi Photo*Gizmo;
You stated; "I see that this issue has not been answered by Apple in over a month, so either they don't care or they are overwhelmed by bugs."
Besides not responding to this forum, Apple doesn't even read this forum. It is a user to user forum. If you really want Apple to be aware of a problem you should use the feedback site instead of posting here.
Allan

Similar Messages

Aperture to export photos either TIFF or JPEG files, highlight and shadow transition has obvious faults, this problem solved!?

Aperture to export photos either TIFF or JPEG files, highlight and shadow transition has obvious faults, this problem solved!?

What problem?
You will have to be _a lot_ more specific if you'd like responsible feedback.
I export thousands of TIFF and JPG files a week with no obvious faults.
(Sent from my magic glass.)

Hi Expert , crystal report export problem. system not responding

Hi,
crystal report export problem. system not responding.
Thanks
Rajkumar Gupta

Dear Raj,
Please try this
          Try
            Dim oSubReport As CrystalDecisions.CrystalReports.Engine.SubreportObject
            Dim rptSubReportDoc As CrystalDecisions.CrystalReports.Engine.ReportDocument
            Dim rptView As New CrystalDecisions.Windows.Forms.CrystalReportViewer
            Dim rptPath As String = System.Windows.Forms.Application.StartupPath & "\" & rptName
            Dim rptDoc As New CrystalDecisions.CrystalReports.Engine.ReportDocument
            rptDoc.Load(rptPath)
            rptView.ShowExportButton = True
            rptView.ReportSource = rptDoc
            For Each oMainReportTable As CrystalDecisions.CrystalReports.Engine.Table In rptDoc.Database.Tables
                oMainReportTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
            Next
            For Each rptSection As CrystalDecisions.CrystalReports.Engine.Section In rptDoc.ReportDefinition.Sections
                For Each rptObject As CrystalDecisions.CrystalReports.Engine.ReportObject In rptSection.ReportObjects
                    If rptObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
                        oSubReport = rptObject
                        rptSubReportDoc = oSubReport.OpenSubreport(oSubReport.SubreportName)
                        For Each oSubTable As CrystalDecisions.CrystalReports.Engine.Table In rptSubReportDoc.Database.Tables
                            oSubTable.Location = System.Windows.Forms.Application.StartupPath & "\" & SourceXML
                        Next
                    End If
                Next
            Next
            'Setting Paper
            Dim rawKind As Integer = 0
            Dim printSet As New System.Drawing.Printing.PrinterSettings
            For i As Integer = 0 To printSet.PaperSizes.Count - 1
                If printSet.PaperSizes.Item(i).PaperName.ToUpper = PaperName.ToUpper Then
                    rawKind = CInt(printSet.PaperSizes.Item(i).RawKind)
                    Exit For
                End If
            Next
            Dim MyTest As New SaveFileDialog
            rptDoc.PrintOptions.PaperSize = CType(rawKind, CrystalDecisions.Shared.PaperSize)
            rptDoc.ExportToStream(ExportFormatType.Excel)
            'rptDoc.SaveAs("C:\TBKING.xls", True)
            '''How to export the report
            Try
                Dim CrExportOptions As ExportOptions
                Dim CrDiskFileDestinationOptions As New _
                DiskFileDestinationOptions()
                Dim rename As String
                rename = rptName.Replace(".rpt", "")
                Dim CrFormatTypeOptions As New ExcelFormatOptions
                CrDiskFileDestinationOptions.DiskFileName = _
                                            "c:\Report\" & rename & "_Export_File.xls"
                CrExportOptions = rptDoc.ExportOptions
                With CrExportOptions
                    .ExportDestinationType = ExportDestinationType.DiskFile
                    .ExportFormatType = ExportFormatType.Excel
                    .DestinationOptions = CrDiskFileDestinationOptions
                    .FormatOptions = CrFormatTypeOptions
                End With
                rptDoc.Export()
            Catch ex As Exception
                MsgBox(ex.ToString)
            End Try
            '' end by kevin shah
            rptView.Show()
            rptView.ShowExportButton = True
            Dim oFrm As New System.Windows.Forms.Form
            rptView.DisplayGroupTree = True
            rptView.Dock = System.Windows.Forms.DockStyle.Fill
            rptView.Location = New System.Drawing.Point(0, 0)
            oFrm.AutoScaleBaseSize = New System.Drawing.Size(5, 13)
            oFrm.Controls.Add(rptView)
            oFrm.Name = "Report Viewer"
            oFrm.Text = "Report Viewer11"
            oFrm.ResumeLayout(True)
            oFrm.WindowState = System.Windows.Forms.FormWindowState.Maximized
            oFrm.TopMost = True
            oFrm.ShowDialog()
        Catch ex As Exception
            objMain.objApplication.MessageBox(ex.Message)
        End Try
By pressing this button XLS file be generated on C:\report\
Hope this will resolved the issue
Thanks
Kevin

CS4 Audio Export Problem

Hi
I'm fairly new to CS4 and have picked up an audio export problem, more than likely with a setting of sorts. For some reason when I export to MPEG2 -DVD via the Media Encoder, the video portion is fine as well as any audio that has been placed and edited on tracks audio 1 and 2 in PP. However, if there is additional audio placed on tracks 3 or 4 for example (say a music MP3 overlay) then this does not come out ... only audio placed on tracks 1 and 2 in PP come out. I have checked the obvious like making sure the tracks aren't muted etc but to no avail. Also tried changing from PCM audio to MPEG ... Stereo to 5.1 mixdown ... nothing doing.
Any help would be greatly appreciated.
Thanks and regards
Videoman 1
SA

Thanks Harm ... got SnagIt and with a few helpful YouTube tutorials ... am in business. Hunt and John, also thanks ... the other method equally as good. Now, I have attempted to attach my screen shot which should display my CS4 timeline and associated audio monitor windows above. By the way, this was for a wedding and as indicated, you will notice an MP3 lying in audio track 3 which as mentioned is my problem as it is not audible after render via Media Encoder. But remember, the moment I slip this MP3 up into audio track 1 or 2 above ... problem solved. I know there must be something small like a setting gone wrong or incorrect. As mentioned, any help would greatly appreciated.
Thanks to you all.
Regards Paul ( Vryheid, South Africa )

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive but many are not showing up in Aperture.

Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date. The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

Export Problem in LR 3.5

Hi folks,
I have been working with LR 2.7 for a while now and was happy with it.
PC - Win XP - LR3.5
Photo's stored on external hard disk (K:)
The RAW captures of a Nikon 3100 I recently won were not being recognized/imported by LR 2.7 and I installed the 3.5 version to see if it was any better. I would have to buy it anyway by the time I switch to Win7. In 3.5 the Raw files were imported, the settings of 2.7 were nicely taken over but now and I cannot export the files I have worked on to the K: drive of the external hard drive as I used to do with 2.7.
I get the message 'The folder could not be found' though it is set in the Export Window and I am looking at it in Win Explorer.
The original RAW captures are on the D: drive but that was always the case with 2.7 as well... I am doing it exactly as I used to with 2.7.
I tried with a photo from an older folder of my usual camera and everything works fine there.
The problem seems to be only with the Nikon files. Now I start wondering if there is something with raw format of this Nikon camera that is putting LR in a twist...
Anybody any ideas to help me out?
Thanks and grts
Nil

@ web-weaver:
Of course they go to a different folder and they also get different
titels/names once processed in LR. The originals are always RAW (NEF) and I
export them as jpg or tiff files depending on what more I will do to them.
@ ssprengel:
I get the message when I have renamed the file in the export window, set
the folder it has to go to and hit export.
In the 2.7 version I got it already when I tried to import.
As I said, this only happens with the Nikon (NEF) RAW files. With the
Olympus (ORF) RAW files I have no problem at all and had no problem in LR
2.7 either.
I cannot see anything wrong in the Export panel nor in Preferences.
Plug in is Metadata Wrangler and has been updated to the latest version >
no joy...
I tried import/export with jpg files and no problem there.
Yesss! Got it! What I had overlooked was a question mark next to the folder
in Library (sooo small). A rightclick and telling LR where it was solved
the problem. Strange, though, as it has never done this before... the main
folder and the path are still the same as the ones that work perfectly with
Olympus exports... just a different subfolder named Nikon and another named
Test... Also strange that if I started off with jpg, it was no problem
either...
Anyway, thanks a lot for shaking my senses for me
Nil
2011/12/10 web-weaver <[email protected]>
Re: Export Problem in LR 3.5 created by web-weaver<http://forums.adobe.com/people/web-weaver>in
Photoshop Lightroom - View the full discussion<http://forums.adobe.com/message/4075999#4075999>

HT202020 Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Using a SDHC card adapter I can import directly on my iPad2 videos (.mov) taken with a Panasonic DMC-ZS3. The same video files (same file format) imported in Aperture 3.3 cannot be synchronized with iPad. Is Aperture causing the problem?

Oh, baby! This bad boy flies!! Here's what to expect:
I had 40,000 images in Aperture 3 and it was dog slow at everything. I installed 3.1 update today. It took 5 minutes to update the database and then behaved marginally better than before at ASIC library navigation. I was disappointed.
Then I QUIT the app. It took a couple of hours to "update files for sharing" with a counter that went to 110,000 images. So it must have updated every thumbnail and variation of preview. Turned it back on , and BAM. Came up fully in seconds. Paused for 10 seconds ten everything was lickrty split. For the first time ever, I can use the Projects view with all 791 projects and scroll quickly. I even put it in photos modevand whipped thru all 49,000 images!
Haven't done anybprocessing yet, but i'm liking it!!
Jim

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Aperture is exporting large file size e.g. original image is 18.2MB and the exported version (TFF 16 Bit) is 47.9MB, any ideas please

Raws, even if not compressed, Sould be smaller than a 24-bit Tiff, since they have only one bitplane. My T3i shoots 14 bit 18MP raws and has a raw file size of 24.5 MB*. An uncompressed Tiff should have a size of 18 MP x 3 bytes per pixel or 54 MB.
*There must be some lossless compression going on since 18 MP times 1.75 bytes per pixel is 31.5MB for uncompressed raw.

Aperture and Exporting and Compression (and iPhoto)

Hello All...
I recently imported an aperture project into iPhoto to create a book for a friend. In aperture, the the photos appears as 1536px x 1024px - i.e. perfectly big enough to create a 6" x 8" softback book. However, after the import, some pics appear as 768px x 512, and some as 1024px x 680px. Now, when I load the images into the book template, it says they are to low quality.
Also, when I dragged an image from aperture to the desktop (one that is the mentioned bigger size in aperture) is saved to the desktop as the smaller size. How can I export from Aperture, preferably to iPhoto, in the original, or a big enough, size?!
Thanks,
Sam

Sam
Sounds like you're dragging files from the Media Viewer that shows up when you go File -> Show Aperture Library. This Media Viewer only contains the Previews generated in Aperture. Dragging to the desktop also gets a Preview. To get the full size pics you need to export from Aperture (File -> Export and choose the correct Export settings) and import to iPhoto.
Regards
TD

Export problems- it's renaming my MOVs to strange things and they're huge!

Hey guys,
strange fcp export problem. I have a 10 minute anim compressed fcp project, 1920x1080, 30fps on a top-of-the-range macbook pro with external terabyte HD. I did a test export a couple of days ago, because our deadline is really soon, and that all worked fine - a 10 minute quicktime, 100% anim codec, was 26GB. That was fine. I did another test clip, just a spinning bitmap for 10 mins, from AfterEffects with similar, succesful, results and file sizes.
Now, however, when I export, it comes out as 60GB, and FCP changes the filename to something which is the first half of the filename I chose, and a strange number for the second half which is different each time I try it. Something like "filena#CF342.mov", for example. This file seems to have video in it OK, but it's 3 times the size, and the data rate is much higher, too high to play back.
The only changes I've made since my successful test are replacing many of the low res previews with hi res versions, and adding 1 minute to the end. And I changed my QMaster setup, not sure if that's anything to do with it.
Anyone got any ideas? I'm getting pretty worried.....
thanks in advance....

Thanks for the quick reply! No, don't think that's the problem. The new render doesn't have an alpha channel - it's Animation 100% Millions (not Millions+), and I don't think that would add more than 25% to the file size anyway. It also wouldn't account for the strange renaming of filenames. And the increase in length is only 10%. The file size has tripled!
The final delivery format was going to be animation, 1920x280, because it's going to projected on a 30m wide cinema screen and live TV tomorrow night but our playback solution (while it handles the test files ok) can't handle the data rate of these strange new files: it's 800mb/s, which is pretty ridiculous.
The renaming of the files suggests (to me at least) some kind of bug/error, but it doesn't report any kinda error in either fcp or quicktime.
Plan B is to recompress the strange big file using h264 which gives an ok quality and is 10% of the size. Reason I'd like to do it animation is I need to do several versions with different gamma, so I need to do further processing on the rendered file after it's dumped from FCP.
Any thoughts? I'd like to get to the bottom of this.
one thought - I didn't tick "recompress all files" and some of the source DOES have alpha - would it be taking the alpha channel even though I didn't ask for it?

Export Problem Solved (new problem)

I had posted earlier about export problem it was a silly mistake as i had kept hide extention on dats y it happened
Now problem is when i export the exported video has some pixcels and it hangs in between dunno wats wrong

What's a pixcel?
Pixel?
All video has pixels.
Seriously, your question is completely incomprehensible.

CS4 Export Problem

I have an external hard drive to which I export my encoded CS4 video files once I have finished editing. The problem is that, in doing so, space seems to be used also on my C drive. I need to find and delete these files on my C drive once my PP project files are rendered to my external drive. I have looked in temp files but they not there. Can anyone advise me on this?

That's done it S.V. Many thanks!
Lewis B.
Date: Mon, 13 Sep 2010 11:13:53 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Export Problem
I'm a newbie so don't take my word as gospel buuuuttt....
If you're using Vista you might be making the same mistake as me. Go edit>preferences>media, hover the mouse over the media cache files location (i.e. C:\yadayada) and TYPE that into the bar at the top of the my computer. Don't click through and try and find it, TYPE it like you would an internet address in a web browser.
Silly Vista.
>

How can I access the iphoto library using windows pc? Upgrading to aperture solves my problem?

How can I access the iphoto library using windows pc? Upgrading to aperture solves my problem?
My home network is used both by my macbook and my wife's windows pc. Considering that, I would like to know if we can share our pictures with each other (specially because I intend to store all of them into a NAS storage - WD My Cloud, probably).

No you can not - neither iPhoto nor Aperture has any cross platform capability
You can share photos with the PC using MyPhotoStream or Shared PhotoStreames
You can not share the iPhoto library
And you can not put the iPHoto library on a NAS - it MUST always be on a volume formatted Mac OS extended (journaled) and mube on a fast wired local connection - it can not be on a Network
There are Digital Asset Managers that can do what you want - iPhoto and Aperture can not
LN

Excel export problem using craxddrt

Hi,
I'm using craxddrt v.11.5 in our intranet application to export rpt.reports to different formats. My code works well with PDF and text exports, but when it comes to Excel after the .Export(false) method executes the browser window just goes into idle then the session finally expires. I never catch any error. I have tried several export options with no prevail.
I suspect the Excel export is missing some info to complete and it is trying to prompt me, but no visible prompt gets displayed/answered so it just expires.
Could anyone help me out. I've spent several days researching and fixing the code and ran out of ideas.
Sincerely
Steve Komaromi

Hi Steve, Is there some reason you are posting this question over and over again?
Try looking at your same post: Excel export problem using craxddrt
Also, RDC is legacy product. Look for you answer where you posted the exact same question in the legacy forum.

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

Aperture 3 exporting problems

Similar Messages

Maybe you are looking for