Aperture-3 hangs and the system too, while editing in 100%

I am not sure about other people have the same issue,
Just wanted to explore if any of you have / had the same issue.
I use Macbook Pro 13" (i5 & 4GB RAM), Recently installed aperture-3 from mac store.
I usually shoot in RAW and do the rest with app-3.
In recent days, my aperture and my system hands while editing any RAW image, mostly while using brushes (for sharpening / polarization).
Coincidentally or not, it happened all the times when i have the pis in 100% zoom-in condition.
If you experienced similar issues please share and let know hoe you resolved it... Also requesting experts in this group to throw some light on this subject.
Thanks in advance
Munish

Hello munish,
I'd try some diagnostics first, before you reinstall.
Macbook Pro 13" (i5 & 4GB RAM)
I had the same setup as you - it worked great with Snowleopard, but as soon as I upgraded to Lion Aperture was running at a snail's pace and completely useless. I added 4 GB RAM and all was back to normal. Also, if your harddrive is very full, performance may go down. Keep at least 10% of your drive empty. How full is your disk right now?
To check if RAM might be an issue on your machine, start the Activity monitor (Applications -> Utilities) and look at the memory usage while Aperture is running. Don't run any other apps simultaniously, that are heavy on RAM, like Safari.
And run a hardware check: Using Apple Hardware Test: http://support.apple.com/kb/HT1509
If you cannot find a hardware problem - hopefully not! try the usual trouble shooting measures in turn, for corruption of some files in your Aperture Library may cause similar symptoms, see Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
If you want to reinstall Aperture as described in the post that Nilsemann pointed to - since you installed your Aperture from the AppStore - then you need to enter the following command in a Terminal window after cleaning the libraries before you reinstall Aperture:
Sudo pkgutil -forget com.apple.pkg.GarageBand
That will ensure that all recent update packages will be deactivated and you can update the newly installed installed Aperture.app again to the most recent version. You will be prompted for your admin password when you enter the command.
Regards
Léonie

Similar Messages

Mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing)

mac pro 5,1 / 10.8.2 / 10.0.7 - while working in fcx and the program and the system hangs (freezing). Only moves the mouse pointer. In addition to disconnecting from the mains, nothing helps! what to do?

Yes, it would if you ran it on the new MBP which is the reason I am saying install rather then clone.
If you clone then you are only getting the same code as the old MBP which probably will not have the correct drivers.

HT1430 My IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged

My IPAD Mini touch screen is not responding, it is showing a message icloudBackup but the back up is not happening and the system seems to be hanged?

Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem.

Adobe Bridge CS4 Hangs and whole system goes down.

Adobe Bridge CS4 Hangs and whole system goes down.
This is happening when I just finished edition RAW files in ACR and hit DONE, right after that a Bridge hangs, Cannot open Explorer, PC functions are down, cannot start anything, cannot stop Bridge process, cannot properly restart. Only holding power button shuts donw PC forcefylly.
I happens once per 10 edits of RAW files and super annoying.
Pleeeeease help!

No wonder I think this is Bridge.
That is indeed a tempting thought, have you already tried the refresh preferences for Bridge using ctrl key pressed down while restarting Bridge?
But Bridge is very critical in reacting on odd system behavior, so also keep the advice of Station-Two in mind. On a Mac repairing permissions often solves problems, don't know the PC equivalent of this.

I'm running V10.6.8 and the system is not recognizing a San Disc adapter that I plug into the side of the keyboard. This always worked in the past. Whats changed?

I'm running V10.6.8 and the system is not recognizing the presence of a San Disc (SDHC) adapter that I plug into the left side of the keyboard. This always worked in the past. Whats changed? I can't upload my images to a folder.

Another item I'd found when getting an SD card for an older camera was the lack of backward support from the SD card if it was too new, while a newer camera can sometimes use an older SD card at a slower read-write speed. There are limits and ceilings on what kind of card works with old/new stuff.
So I ended up taking a nice SD card back to one store and had to settle on a 'walmart kinda dubious kingston two pack a cure' for the older Panasonic Lumix. Smaller capacity but seems to work OK for the era. I don't trust kingston with macs, but this 10 y/o Lumix seems to not care about that.
Hopefully you can obtain the correct cards, because some stores only sell parts for their inventory of cameras. And some adapters are limited too.
Depending on what I'm doing with the card and the camera it goes with, I attach the camera to the computer and not just the card in a reader. That way I can file items inside the camera SD card in a way the camera won't overwrite them. Later when I save everything from the card into an external hard disk drive, all my filed folders of images by date (I created in the SD) appear in order, in the later archive. Easier too, when I burn to DVD or CD media, to create yet another archive away from the computer or the camera.
Good luck & happy computing!

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto '09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn't need it). I am totally happy with the

I have a 3 year old MacBook Pro with MAC OSX 10.6.8, iPhoto ’09 version 8.1.2 and have downloaded two software programs: one is Aperture 3.2 and the other is Photoshop Elements 9 (which I got from a friend who didn’t need it).
I am totally happy with the way iPhoto organizes my photos and how I can work with iMovie to create slide shows with music from iTunes, etc.
I have been shooting mostly high resolution jpegs and I continue to learn more and more about photography, post processing etc. I realize that the small adjustments I can make in iPhoto are good, and are adequate most of the time. However, a have started to experiment with shooting RAW images and would like to go the next step, ie. post processing.I am totally technically challenged and need SIMPLE, INTUITIVE programs and am certainly NOT anywhere ready for Photoshop CS whatever!
After having these programs sit on my computer, I decided to try to see if I could figure them out. When I opened Aperture, this is what first comes up.
“Welcome to Aperture 3.2
Your library needs to be upgraded to work with this version of Aperture. Once upgraded, you will not be able to use this library with previous versions of Aperture.
Upgrading a library from previous versions of Aperture 3 generally takes a few minutes or less, though larger libraries will take longer. After that, Aperture 3.2 will upgrade your library's thumbnails, but you can use the application during that time.
Tip: To open a different library, quit Aperture and hold the Option key down while starting Aperture
Current Library Location:
Jadzia (home) -----Pictures------Aperture Library
QUIT UPGRADE”
I have heard horror stories about moving your entire library to Aperture, ending up with 2 libraries, etc. etc. hence my previous reluctance in attempting Aperture. In addition, many of my photography friends are saying: Go with Lightroom 3.....you’ll love it!
So here is my dilemma. I don’t want to mess around with my iPhoto library. All I want to be able to do, is to isolate a few photos, export them to Aperture, Elements, and work on them there, then bring them back into iPhoto.
Can I do this? Should I forget about Aperture and Elements and look at purchasing yet another program like Lightroom?

Export those few photos via the File ➙ Export ➙ File Export menu option with Kind = Original to the Desktop. Then import them into the Aperture library. That would keep one copy in your iPhoto library and another in your Aperture library to edit, etc.
You can use Photoshop Elements 9 from within iPhoto as your editor of choice. However, if you edit a raw file in iPhoto with PSE9 the resulting edited version must be saved outside the iPhoto Library and imported back in as a new file. For editing jpegs just do a Save (not a Save As) and it all will be kept within iPhoto.
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

I installed Windows 7 in my Macbook pro, I can access Windows data in Mac, but I can't copy and delete it. and the same case while i am working in Windows. Could you please guide me if there is any solution, where I could copy/paste/delete my data.

OS X can natively read NTFS of Windows, but not write to it.
Windows can't read or write to HFS+ of OSX, and that's a good thing from a security standpoint.
Ideally if you share files between operating systems you should have a FAT/MSDOS formated USB key or hard drive. (exFAT external drive if any of your files are over 4GB in size) both these formats are universal for OS X or Windows.
If you install software into Windows and OS X to read each others formats, then you have to pay to update/upgrade it deal with headaches.
If you swtich between Windows and OS X a lot, don't need full hardware performance for Windows, you may consider installing virtual machine software like VMFusion or Parallels which can take a copy of your Windows in Bootcamp and place it into OS X as a file then run that copy of Windows in a window in OS X like so.
Advantage here is you run most of your light weight Windows programs like this at the same time as OS X.
Benefit is you can run just about any Windows or Linux version and OSX server editions (not client versions)
Bootcamp only allows Windows 7, that's it now.
You'll also be interested in two fre pieces of software, Carbon Copy Cloner and Winclone on macupdate.com.
CCC clones OS X partition and Winclone clones the Bootcamp partition. Valuable for you.
Good Luck

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

An error has occurred in the system "ECC" while copying the document

Hello Experts,
When I'm creating service orders in CRM UI and saving them I'm receiving this error:
An error has occurred in the system "ECC" while copying the document
Details:
An error has occurred in the system "ECC" while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
Error occurred during determination of profitability segment (Notification E IAOM 025)
Profit center for CRM integration not found (Notification E KECRMPCA 001)
Error occurred during determination of profitability segment (Notification E IAOM 025)
Account assignment error in internal order K1153000004111 for position 2000000990/0000000020 (Notification E C( 321)
Regarding to the account assignement, we developed a field to input Accounts IDS for WBS.
This field has a customization table related which allows to visualize in a dropdown list the allowed WBS ID per user according to the entries in the table.
Also, In the Service Order there is one status that triggers an action that creates a Sales Order in CRM that is replicated in ECC, but since I have this error Sales order is not being replicated in ECC.
Any ideas?
Kindly Regards,

HI,
Please check these threads:
CRM-COPA- An error occurred in system EEPCLNTXXX during account assignment
http://www.riderspider.com/2010/11/error-error-occured-in-system-dv1cltecc.html#more
Denis.

An error has occurred in the system DV1CLNT400 while copying the document

Hi All,
While creating complaint confirmation i am getting below mentioned Errors in ECC.
Can any body provide configuration settings.
An error has occurred in the system DV1CLNT400 while copying the document
Message no. CRM_ORDER_MISC 020
Diagnosis
Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
Transmission log
No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
Error occurred during determination of profitability segment (Notification W IAOM 025)
Error occurred during creation of settlement rule (Notification I IAOM 046)
Regards,
Teja

Hi,
From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
Hope this will help.
Thanks,
Samantak.

Clear history hangs and takes quite a while to complete even when only one site is visited

clear history hangs and takes quite a while to complete even when only one site is visited . While not a major problem it is annoying

Hi Frank,
Does this Release Management performance isssue occurred when you use it at first time? Do you have any setting on your TFS? Would you please tell us your TFS version?
If you have any repro steps, please share with us, thank you.
Best Regards,
Dear Molly,
Yes, this issue has occurred right from the beginning when we started using Release Management.
Could you please clarify what you mean by "do you have any setting on your TFS"? As far as I know, our TFS installation is a straightforward and normal one.
Our TFS version is TFS 2013.
The steps to reproduce (in the simplest scenario) are as follows:
Create a new project in Visual Studio 2013, containing one PowerShell script file. In the script file, perform a simple command such as "New-Item E:\Temp3 -itemtype directory -force".
Perform a successful build of the project, making sure that the script file is copied to the drop folder.
Create a vNext Component in the Release Management Client, that refers to the directory in the drop folder that contains the script file.
Create a new vNext Release Template in the Release Management Client, containing one "Deploying using PS/DSC" action. In that action, set the PSScriptPath to the script file we created.
Perform a new Release using the Release Template we just created. The Deploy action will take a long time, even though the script itself takes less than a second to run.
Please let me know if you need any more information.

An error has occured in the system KRP810 while copying the document

Hello Experts,
In my project while saving the service confirmation transaction i am getting the below error. Below is the complete description of the error.
An error has occured in the system KRP810 while copying the document
Message no. CRM_ORDER_MISC 020
*Diagnosis*
*Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.*
*Transmission log*
*Number of hours recorded 16,04 exceeds target hours 0,00 (Notification W LR 206)*
*Updating could not be completed (Notification E S& 150)*
Could any one of you tell me , how can we remove the error and what is the reason behind this error.
Thank you in advance.
Thanks & regards,
Vamsi krishna.

need to replace confirmation

Call of duty black ops has come out on mac, and the system requirements say 2.4ghz is needed, i only have 2.3ghz, do you think the game will run okay? thank you

Call of duty black ops has come out on mac, and the system requirements say 2.4ghz is needed, i only have 2.3ghz, do you think the game will run okay? thank you

This is too generic of a statement. They are working on support for the 2012 MacBook Pros and because of the better architecture in the 2012 machines a 2.3GHz machine may perform well.

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

I performed a software update and the system is installing an update but it has been running for over 24hrs and keeps saying "This may take a few minutes, don't shut down your computer" Can anyone help?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

I recently bought Photoshop Elements 12 and the system is saying that the Redemption Code is no longer active. How do I get a new code that will allow access to the software ?

I recently bought Photoshop Elements 12 and the system is telling me that the Redemption Code is no longer active.
How do I get a new Code number that will allow met to access the software?

you need your serial number. you used your redemption number to redeem your serial number.
if you don't know your serial number, check the account used to purchase or register your pse 12, Adobe ID

Aperture-3 hangs and the system too, while editing in 100%

Similar Messages

Maybe you are looking for