Aperture 3 Import Dialog Doesn't Show Any Images

Sometimes the import dialog just doesn't show any images. First time I encountered this I had to restart Aperture. But now even that doesn't help.
Screenshot:
http://dl.dropbox.com/u/1250153/a3.png
Any ideas or fixes?

Hello qua
You don't say what your source is when your imports have been experiencing problems. Are you importing directly from a camera (or a card in a card reader)? Or are you importing images which have already been downloaded to your hard disk?
I've just completed importing approximately 5,000 images which date back to 2001, across several hundred projects. These have, obviously, been imported from an existing disk-based archive. Every so often, I'd find what you've described - the import window with the source correctly selected, but no preview images. I never worked out a pattern for this behaviour. However, I found dealing with it +for my particular circumstances+ was as simple as pressing <escape> to cancel the import and then immediately beginning the import again. It never failed on the second time around. I never needed (for this problem) to quit and restart Aperture, let alone reboot my system.
The problem I just described was being experienced on a fully patched 3.0.1 system. Of course, you might be experiencing something slightly different...
Regards,
Gary

Similar Messages

  • Import dialog doesn't show files anymore (not even the ones on the hard drive)

    I shoot pictures with a D70 (canon) and i imported them always with no problems. After a update or installation of a external program the import dialog does not show any pictures anymore. It's a black screen. The files can be read from the filebrowser and are regular cr2 files (raw files). What can I do? There are 149 files on the card and non are shown, see below

    further in the forum I found this and it did the job
    I would suggest you to reset Lightroom preferences and then check the same.
    http://helpx.adobe.com/lightroom/kb/recover-catalog-images-resetting-lightrooms.html#id_90 046

  • LR5 Import dialog does not list any images

    Lightroom 5 is not seeing that a folder of images I'm trying to import has any images in it. The folder is question has well over 5,000 jpegs (it's my iPhone image depository). While I was able to import images from this folder with no problem in LR4, LR5 is telling me that there are no images in the folder. I've double checked that all my import settings are normal and the same as LR4 and it doens't matter. No matter what I do, I cannot get LR5 to see that there are any images in this folder to import.
    Any thoughts?
    Thanks,
    Antonio
    Here's an image of what's happening:
    Message title was edited by: Brett N

    "If the folder already exists in the Folder panel, select it and Choose Library > Synchronize Folder."
    It doesn't exist in the Folder panel. It never has. It would mess up my workflow to have it as such. I only import from this folder.
    Try (via finder) moving a few of the images in the folder to another folder that has been cataloged. Then synchronize that folder to see if the images show.
    I did this and the images showed up fine, so there is nothing wrong with the image files.
    Instead of invoking the Import Dialog first, drag an image from th Camera Roll folder onto the Library module or the Lr icon. That will bring up the import dialog. see if you get the same results.
    Did this and it did not work.
    Why this is strange is that I have no problem importing from the same folder in Lightroom 4. Something has changed here in LR5.
    Here's another image of what is happening:
    https://www.evernote.com/shard/s1/sh/e6199117-5f68-4a75-9faa-2f94220f8f18/2a633375d4c394fb 7e3ebd19c573eda4/deep/0/Screenshot%206/13/13%203:53%20PM.jpg

  • Import schema doesn't show any link id.

    Hi,
    When i connect http://hostname:50300/strategy/bi/ then choose import schema,after that i cannot see any link ids in the menu.Link ids were already created on application server.Do yo have any suggestion about this situation?
    Regards...

    Hi,
    - If you can't see a Link ID in the dropdown of the BICA Import Schema screen, make sure that PIP is actually connecting properly to PAS.
    - In the SM Administrator you must go to the Manage Models screen and create a Model Connection (BICDEFAULT) to be used by the BICA tool.
    - Stop and start the SAP SM Extended Listener and the SAP SM Listener services. If you are running SM 7.5 with the JPIP version of Interactive Publisher, go to the JPIP Session Monitor from the Tools menu and restart JPIP.
    Hope this helps,
    Miguel

  • Gallery doesn't show any images and videos in n73 ...

    everything seemed to work fine untill today, i have hard reset my n73 2 days ago using code *#7370# two days ago because of a major problem(i was unable to make or receive calls), everything else works fine but the images and videos are not shown in gallery but i can view images and videos using file manager and by opening individual item. I can see images using another third party software photobook. Please help.

    :S,
    Sorry, missed that fact. My memory is good, but short.
    Try moving the "Calendar Cache" file to your Desktop. Quit iCal, and find the "Calendar Cache" file in your Macintosh HD/Users/yourusername/Library/Calendars. Move that file to your Desktop. After that, (I remember that I recommended this before), as long as you are moving files to the Desktop, repeat the plist removal procedure once again, log out/in or restart.
    You should also consider removing the "To Do's" from Mail before restarting iCal. When you open iCal turn off "Show Birthdays calendar" in iCal>Preferences...>General.
    Are you syncing any data? If so, what method(s) are you using?
    ;~)

  • After reinstall, Aperture 1.5.1 doesn't show vault images from backup drive

    Hi folks,
    Okay, I am stuck. For some reason Aperture would not start when I double click the icon, so I reinstalled it from the disk and upgraded it to 1.5.1. I have all the images I was using before the crash backed up in a vault on my back up drive but when I open Aperture the folders and project do not appear in Aperture. I right click on the vault and say open with Aperture.app but nothing happens and I can't seem to access the files with Aperture.
    If anyone can help, it would be really great and appreciated.
    Thank you
    Scott

    Hi Scott,
    Have you checked the Aperture - > Preferences and library location?
    Default should be ~/Pictures/Aperture Library.aplibrary
    Is there a ~/Pictures/Aperture Library.aplibrary in Finder?
    If so, how large it is? does it seem to contain the images(sizewise)?
    Restoring vault:
    Have you tried opening Aperture, select File - Vault - Restore Library
    hth

  • When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

    when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

    Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
    I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

  • Import dialog doesn't appear (OS X)

    When I connect my SanDisk Firewire memory card reader to my Mac Pro, Lightroom doesn't open and the import dialog doesn't appear. This worked fine on my previous G5. iPhoto isn't opening either... nothing happens at all when I plug in the reader.

    Chris, you may have already done this, but be sure to check 'Show Import Dialog when a Memory card is detected' under Import in LR PReferences, as well.
    Don
    Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

  • The dialogs doesn't show up over HTTPS connection.

    JWS usually shows Version check and Launching dialog when it start up.
    But when it started over HTTPS connection, those dialogs doesn't show up.
    When we use HTTP connection, the application launch by following step.
    1. Java loading dialog shows
    2. Version check dialog shows
    3. Launching application dialog shows
    4. Application launched
    However, in the case of HTTPS connection, step2, 3's dialog doesn't show up.
    (It might be skipped? What's going on?)
    I think that the step1,2,3 are processed by JavaWebStart.
    Is there any way to show these dialogs when we use HTTPS connection?
    Client: Windows XP(SP2), JDK: 1.4.2_06
    Web Server: WebLogic(ver.8.1)

    When running over http or file protocol, these dialogs are shown if the update check takes more than 1500 ms, when application must be updated before launching (due in 1.5.0 to offline-allowed not being specified, or setting <update check="always" /> in 6.0) (assuming target isn't using basic authentication). If the update check can complete in less time than that, then the dialogs will not be shown.
    For https, there is a probability that the attempted https connection will cause https security dialogs, which would then always cause the check to take more than 1500 seconds (or whatever timeout is configured) so webstart won't show the download progress dialog untill it knows there is an update.
    This should be a bug, since it is handled beter in BasicAuthentication case.
    If you are using Authentication, the download dialog will show up only after 1500 ms if the JAuthenticator chalange dialog is not being shown.
    Similarilly, using https, he dialog should show after 1500 ms (or whatever timeout) if the https security dialog, or host mismatch dialog is not showmin.
    /Andy

  • I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" it my old username before changing it.

    I changed my username and now afp doesn't show any users. I have file sharing on. And also when I select "get more info" on the shared folders they don't have my username in there. it just has "applepc(me)" my old username before changing it showed the correct username? please any help would be great.

    Turn Time Machine OFF temporarily in its preference pane. Leave the window open.
    Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
    Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
    Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
    When you're done, turn TM back ON and close its preference pane.

  • IPS MC: It doesn´t show any signature.

    Hi.
    I had IPS MC 2.1.0 (Build 123) functioning fine. I installed the idsmdc2.1.0-win-CSCsc336961.tar file in order to solve the CSCsc33696 bug. Next, I installed an update signature for IPS version 5 (But I didn´t has any IPS sensor version 5, I just was checking), but the update didn´t work. Afther it, I noted that I have a big issue: When I try to modify any signature, in the Settings->IOS IPS, it shows:
    Object loading failed. Errors occurred while loading the Signatures. Not all signatures may have been loaded.
    It doesn´t show any signature.
    I erased all the sensors, including the IOS IPS. Then I import one of the IOS IPS and follow the instruction for the CSCsc33696 bug. I reimported the device, deployed configuration, disabled the IPS feature in the router and enabled the feature in order to load the signature configuration, but the issue persist. Then, I installed the newest signature update to IDS sensor version 4 (it includes IOS IPS update) and it installed without problems, but the problem in the sigature page perisist.
    I reinstalled the IPS MC, but the problem persist. I uninstalled the IDS MC, and installed again without save the database. It shows the application IDS MC and Security Monitor without configuration, like a new installation, but the issue persist!!!
    Someone had this problem? Someone know how can I solve it?
    Thanks.

    The Cisco IOS IPS feature restructures the existing Cisco IOS Intrusion Detection System (IDS), allowing customers to choose to load the default, built-in signatures or to load a Signature Definition File (SDF) called attack-drop.sdf onto the router. The attack-drop.sdf file contains 118 high-fidelity Intrusion Prevention System (IPS) signatures, providing customers with the latest available detection of security threats. For more information refer to following url:
    http://www.cisco.com/en/US/products/ps5854/prod_configuration_guide09186a00802c9587.html

  • Region Popup Dialog doesn't show up in Detach mode

    issue description:
    1.     There is a task-flow: filter-task-flow.xml, there is method call as default activity and always route to next one view activity filter , refer to below filter.jsf code
    <af:panelGroupLayout id="pgl1" layout="vertical">
    <af:popup childCreation="deferred" autoCancel="disabled" id="filterpopup" binding="#{backingBeanScope.filterBean.p1}" contentDelivery="lazy">
    <af:dialog id="d2" ……/>
    </af:popup>
    </af:panelGroupLayout>
    2.     In my report.jsff page, there is a command button and a region with filter-task-flow.xml , refer to below
    <fnd:applicationsTreeTable featuresOff="wrap " actionsMenuRendered="false" primaryToolbarRendered="true" secondaryToolbarRendered="true" >
    <f:facet name="treeTable">
    <af:treeTable …..>
    </af:treeTable>
    </f:facet>
    <f:facet name="appsTreeTableSecondaryToolbar">
    <af:toolbar id="t1">
    <af:commandToolbarButton id="filter2" text="Filter" rendered="true" >
    <af:showPopupBehavior triggerType="click" popupId=":::fr1:filterpopup"/>
    </af:commandToolbarButton>
              </af:toolbar>
    </ fnd:applicationsTreeTable>
    <af:region value="#{bindings.filtertaskflow1.regionModel}" id="fr1"/>
    3.     In page definition reportPageDef.xml for report.jsff page, there is below definition.
    <taskFlow id="filtertaskflow1"
    taskFlowId="/WEB-INF/…../filter/flow/filter-task-flow.xml#filter-task-flow"
    xmlns="http://xmlns.oracle.com/adf/controller/binding"
    activation="deferred">
    <parameters>
    <parameter id="selectedSubTab" value="#{backingBeanScope.apprAppraisalPMOCRBean.selectedSubTabKey}"/>
    <parameter id="planId" value="#{backingBeanScope.apprAppraisalPMOCRBean.planId}"/>
    <parameter id="mgrEventId" value="#{backingBeanScope.apprAppraisalPMOCRBean.mgrEventId}"/>
    </parameters>
    </taskFlow>
    4.     Now if I go to this page(report.jsff) and click command tool bar button Filter , popup dialog works. And enter Detach mode, click Filter again, popup dialog works.
    5.     But if I go the this page(report.jsff) and enter Detach mode before clicking Filter button, then try to click Filter button, popup dialog doesn’t show up without any issue/error in UI & console. Then I exit Detach mode, and click Filter button again, It will still not popup any more until you reopen the page and click Filter button firstly.
    Appreciate for any suggestion. Thanks a lot.

    resolved. just need move dialog from region to report.jsff page and keep table content in region. that's all

  • BPEL Console doesn't show any instances created

    Hi,
    We are using file protocol to read the files from trading partner into B2B. File is successfully processes by B2B. I can see that in reports.
    Then I have defined a BPEL process to Dequeue the messages from B2B using AQ Adapter, transforms and places the files in the local file system.
    The BPEL process is simple flow with one receive , transform and invoke activity.
    I have configured AQ adapter using WSIF browser. I can see the deployed document definition in browser.
    I have the TP agreement deployed, BPEL process deployed, but I don't see the 850 file processed. BPEL Console doesn't show any instances created. How would I know where what went wrong?
    Please help.

    Try using java oracle.tip.adapter.b2b.data.IPDequeue to dequeue the message and see if you can dequeue
    Then you'l be able to pin point if the issue is with your BPEL or with B2B Queue's
    Kalyan

  • "Dependecies" tab doesn't show any information for a selected table version 4.0

    Hello,
    I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select one table, in the tabs on the right side I can see information for "columns" and "data" and "constraints" and "indexes"... but the tab "Dependencies" doesn't show any information about references between this table and other tables in the schema.
    Oracle database is v11.2
    Can you please tell me what do I need to do in order to see information on "Dependencies" tab for a table?
    Thank you,
    Milan

    Hi, here is my example of XML extension showing referencing tables:
    Save the following XML to a file.
    <items>
      <item type="editor" objectType="TABLE">
        <title><![CDATA[*Referencing Tables]]></title>
          <query>
            <sql><![CDATA[SELECT
      cfk.owner "OWNER",
      cfk.table_name "TABLE NAME",
      cols.column_name "COLUMN",
      cfk.constraint_name "CONSTRAINT NAME",
      cfk.delete_rule "DELETE RULE",
      'SQLDEV:LINK:' || cfk.owner || ':TABLE:' || cfk.table_name ||
      ':oracle.dbtools.raptor.controls.grid.DefaultDrillLink' "LINK"
    FROM
      sys.all_constraints cpk,
      sys.all_constraints cfk,
      sys.all_cons_columns cols
    WHERE
      cpk.owner = :OBJECT_OWNER AND
      cpk.table_name = :OBJECT_NAME AND
      SUBSTR(cpk.table_name, 1, 4) != 'BIN$' AND
      SUBSTR(cpk.table_name, 1, 3) != 'DR$' AND
      cpk.constraint_type in ('P', 'U') AND
      cfk.r_owner = cpk.owner AND
      cfk.r_constraint_name = cpk.constraint_name AND
      cfk.constraint_type = 'R' AND
      cols.owner = cfk.owner AND
      cols.constraint_name = cfk.constraint_name
    ORDER BY
      cfk.owner, cfk.table_name, cfk.constraint_name,
      cols.column_name]]>
          </sql>
        </query>
      </item>
    </items>
    In SQLDeveloper select Preferences -> Database -> User Defined Extensions and click <Add Row>.
    In the "Type" field enter "EDITOR" and in the "Location" field enter the path to the file with XML.
    After restarting SQLDeveloper You should see a new tab "*Referencing Tables" for tables.

  • IPhoto app doesn't show any photos from my photos app

    I just upgraded my new iPad to iOS 6 beta. Maybe that's the problem but suddenly my iPhoto app doesn't show any photos at all. All the tabs (albums, photos, events, etc) are empty.  When I open the app it says "updating photo library" briefly, but that's it. I tried rebooting, deleting the app and reinstalling it, basically everything I could.  Is this a known iOs6 bug?

    Ok, I have the release and I have the issue, photos are just boxes w no pictures, is there a way to remove library and reload? The photo app works fine and all pictures are there.

Maybe you are looking for