Aperture 3 is not displaying pictures or projects properly and I am unable to see my ratings toolbar. Help!!
I am unable to see the ratings display and all photos are formatted improperly in the regular display format of the program. Only in fullscreen format am I able to view all tools otherwise they are shoved out of view from my display so I am unable to navigate the program at all.
For UI problems like these the first step is to move out the Aperture preference file.
See Aperture 3 Troubleshooting the bit about the preference file is about 1/2 way down the page.
If that doesn't solve it post back.
regards
Similar Messages
-
Aperture 3 does not display QuickTime VR files properly
I am not sure if anyone can suggest a fix for this. If you drag a QuickTime VR file into Aperture - it will not properly play the QuickTime file.
I do a fair bit of Panoramic photos - and create QuickTime VR movies - I would like to collect everything inside Aperture.
I think that this is a serious bug - if anyone has any suggestions I welcome them.
IanI was running an up to date version of Aperture 2 on all three of my machines. I upgraded the 17 MBP to Aperture 3. All seemed to function normally. I exported "versions" from an Aperture 2 machine in an attempt to consolidate my libraries. No file names had been changed. "Do not import duplicates" was selected. Aperture 3 wanted to import all files even though some were already present in AP3. I went back and exported "masters" not versions, still saw all files being available for import.
Here is what the AP3 manual says:
"When you import images, Aperture automatically checks to see if any of the images are duplicates of previously imported images. Aperture checks the filename of the master to determine if an image is a duplicate of one in the library. Select the “Do not import duplicates” checkbox to prevent Aperture from importing duplicates. If this checkbox is unselected, Aperture imports all images, even if they are duplicates, and creates a new master with a different name for each duplicate. Aperture never overwrites or replaces a master that has already been imported."
So the question is the "filename" the same. The Finder thinks that the picture file exported from AP2 is exactly the same as the picture file exported from AP3.
Therefore AP3 is not correctly identifying duplicates. -
My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.
- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display? -
Third party apps will not display pictures upon OS upgrade
Hi
I recently upgraded my 8520 to OS 5 and I've noticed that my Time Mobile App and Viigo will not display pictures in the articles or news feeds anymore. I've tried the apps support but no luck.
Is there a possible solution for this?I don't know about Time Mobile, but I noticed that Viigo started having some issues with displaying photos correctly a while back after an OS update as well. One suggestion you can try is to simply do a battery pull - while the phone is on, remove the battery for 15-30 seconds and reinsert. After the phone has rebooted, see if you have any better luck.
Now then, Viigo is still intermittent for me - some feeds load pictures no problem, while others have a lot of issues (or simply don't load pictures period). My guess is that there is something that changed slightly in the OS update that is influencing how pictures are downloaded from the internet and to these apps. Unfortunately there is little that can be done though unless the developer(s) update their apps as well.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution! -
Windows help and support not displaying picture instead red x
on windows vista 64 bit when i click start ? help and support windows help and support open
not displaying picture instead red xHi,
Which browser are you using ? These are for:
Internet Explorer 8 & 9
Start Internet Explorer 8/9.
On the Tools menu, click Internet Options.
On the General tab, click Delete under Browsing History.
In the Delete Browsing History dialog box, click to clear all of the check boxes except for the Temporary Internet Files check box, and then click Delete.
Click OK to close the Internet Options dialog box.
Internet Explorer 7
Start Internet Explorer 7.
On the Tools menu, click Delete Browsing History.
In the Delete Browsing History dialog box, click Delete Files.
Click OK to close the Internet Options dialog box.
Internet Explorer 6 and earlier versions
On the Tools menu, click Internet Options.
On the General tab, click Delete Files under Temporary Internet files.
Click to select the Delete all offline content check box, and then click OK.
Click OK to close the Internet Options dialog box.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Aperture trash is not displaying items in trash. I want to get a number items out of trash. How do I get them displayed or is there another way to put them back in the file?
See Why can't I see my deleted photos in Trash?
-
Netbeans Issue: Servlet do not display Chinese UTF-8 properly
Netbeans Issue: Servlet do not display Chinese UTF-8 properly
Java Version: JDK1.5.0_01, JRE1.5.0_01 (International version)
Netbeans Version: Netbeans IDE 4.0
OS: Windows XP Personal Edition
Dear Sirs,
First at all thanks for reading this post. I am having the following issue. I am creating an application using html pages and servlets. I am using Chinese and English languages on them (html encoding UTF-8).
I created a project in Netbeans and added an idex.html screen reporting to a servlet. Both index.html and in the servlet generated html page contains the line:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
Additional, I setup the character code settings in Netbeans:
(tools-options-Java sources-Expert-default encoding=UTF-8
When I run the project, index.html displays itself perfectly, with the Chinese characters displayed properly. The problem comes when the html created servlet is displayed, which instead of the Chinese characters some strange characters are displayed (�� instead of Chinese).
I have tried different encodings from http://java.sun.com/j2se/1.4.2/docs/guide/intl/encoding.doc.html without any luck. I also setup the encoding of the file itself (using right click-properties in the project menu of Netbeans).
Also, when I am editing the servlet, the characters are displayed properly. I type them directly without any issue, but then the display is wrong at runtime.
Also, just in case this have something to do with the problem, my PC was bought in US, therefore the default character set is not Chinese. I had to install the Chinese typing stuff later on. But like I said earlier, the html page is displayed properly, so I really think is some problem with Netbeans.
After a week trying to find a solution, I decided to post it here in the hopes that someone will show me the way of the light.
Thanks in advance for any ideas or help provided
Aral.Hi, thanks for your help. However I think the problem his more complex than it seems. Here is my doPost method (the important parts anyway):
response.setCharacterEncoding("UTF-8"); //Not necessary because the next line should take care of it, but anyways...
response.setContentType("text/html; charset=UTF-8; pageEncoding=UTF-8");
PrintWriter out = response.getWriter();
out.println("<html>");
out.println("<head>");
out.println("<meta http-equiv='Content-Language' content='en-us'>");
out.println("<meta http-equiv='Content-Type' content='text/html; charset=utf-8; pageEncoding=utf-8'>"); //Again not necessary line, but anyways
out.println("<title>Servlet</title>");
out.println("</head>");
out.println("<body>");
out.println("this is a test 你好 this is a test");
out.println("</body>");
out.println("</html>");
out.close();
This servlet is called from a html file. Also, when I load this in the browser, I right click on the screen and I can see that UTF-8 is setup allright. Doing some detective job I found that:
- If the editor displays the characters perfectly and...
- Other html pages (no servlets) in the same application can display chinese characters well and...
- I have configured the encoding as UTF-8 in the servlet properties and in general properties and...
- The file "web.xml" contains the encoding UTF-8 in its first line then...
...my only guess is that something goes wrong during the building of the project itself (ant?). Unfortunately I have no idea about configuring ant to that level, but I began to think that the problem may be there, during the compilation...
Any ideas?
Once more, thanks for any help or advice provided.
Aral. -
My sent messages are not displayed...what happened and how do I restore?
My sent messages are not displayed...what happened and how do I restore?
http://kb.mozillazine.org/Disappearing_mail
-
Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
<f:facet name="second">
<af:panelStretchLayout id="pa1"
binding="#{backingBeanScope.Assign.pa1}">
<f:facet name="center">
<af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
binding="#{backingBeanScope.Assign.r1}"/>
</f:facet>
</af:panelStretchLayout>
</f:facet>
How do I resolve it ?
Thanks,Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank -
Safari not displaying some web pages properly why?
I have been finding of late that safari does not display certain web pages properly. i.e.: text overlaps other text and is not formatted properly. This seems to have become more common lately. Even Apple's own apple info page does not display properly. Could this be a setting in safari that I have messed up somehow?
Go step by step and test.
1. Delete Cookies
Safari > Preferences > Privacy > Cookies and other website data:
Click the “Details” button.
Remove all cookies except from Apple, your internet service provider and banks.
2. Safari > Preferences > Extensions
Turn off Extensions if any and launch Safari again to test.
Turn on those one by one and test.
3. Delete Caches.db
Close all windows and quit all applications.
Hold "option" key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Caches > com.apple.Safari > Caches.db
Right click the Caches.db file and select "Move To Trash.
Close windows and relaunch Safari.
4. Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
5. Temporarily turn off Safari iCloud sync and test.
System Preferences > iCloud
Uncheck the box beside “Safari” and test. -
== Issue
==
I have another kind of problem with Firefox
== Description
==
An error on a site deleted a photobucket folder full of pictures for a class and I'm trying to see if since I last veiwed them with firefox there is a way to recover them-With the cache or something?
== This happened
==
Just once or twice
== I was on photobucket around 6pm on Mon July 19th
==
== Firefox version
==
3.5.9
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9
== Plugins installed
==
*-The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Shockwave Flash 10.0 r42
*My Web Search Plugin Stub for 32-bit Windows
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape
*DivX Web Player version 1.4.3.4
*npdnu
*Office Plugin for Netscape Navigator
*iTunes Detector Plug-in
*GEPlugin
*4.0.50524.0
*MSN® Toolbar
*Google Updater pluginhttp://pack.google.com/
*RealJukebox Netscape Plugin
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*6.0.12.69
*Google Update
*Java Plug-in 1.4.2_03 for Netscape Navigator (DLL Helper)Hi- I'm Sarie and no this didn't help. I actually tried to log in to respond and it said I wasn't registered. Not really all that cool.
-
In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..
One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
Clinton -
Photoshop CS6 is not installing properly and i am unable to locate the application
HELP ME!!!! My trial Photoshop CS6 is not installing properly and i am unable to locate and open the application on my mac. I am just going around in circles from file to file and back to the starting "intall" icon
I am on the Adobe Download Assistant. It was stuck at "less than a minute" for an hour and a half, showing that the installation was basically done, since the installation bar was full. But it was stuck. Now it has stopped all together, and is restarting the download from scratch.
Apparently it does not save the download, or only saves a small portion.
c:\adobe/CS6MasterCollection/MasterCollection_CS6_LS16.7z.adadownload
It is at 85.6 MB, even though a short time ago it was close to 99.9% done with the 6,352 MB download.
My internet connection is fine, all is working, and I am able to browse, etc.
I have been careful to keep activity minimal on the computer, so as to avoid conflicts.
The conflicts are with the Adobe Download Assistant.
I amabout ready to just give up, and look for alternatives.
Please help. -
my 4 digit password is not being recognized on my phone AND i am unable to restore my iphone on my old PC, can an apple store restore my phone and unlock it?
Contact Apple's Customer Support - in the US, (800) 767-2775 to find out. But they will most likely tell you what you already know...it needs to be restored against the computer is was last linked with.
-
Help! My Safari shortcuts do not display pictures of the page anymore on my iPad.
I use shortcuts from web pages for various reasons and after a recent update, when I try adding shortcuts to my home screen they no longer display photos of the page but ugly white boxes with lines throughout. The previous pages I have shortcuts to all still have a photo of the page on their thumbnail but the new ones I am trying to add do not. I have tried deleting and readding the shortcuts, restarting Safari, restarting my iPad, and restoring from a back up. None of these have worked though. Is there something I am doing wrong? A setting that needs to be changed? A new way of adding shortcuts from Safari? I am in charge of the iPads for my work and I cannot get any of them to have pictures for the thumbnail instead of the awful ugly white square with lines (7 total iPad2s having the same problem). Please help! Thank you!
- DanielleI actually fixed it now, don't worry, I just followed this video: http://www.youtube.com/watch?v=NKFFFe0r-T4
Maybe you are looking for
-
Is there any table that holds the history of BEx queries
Hi, I just wanted to know if there is any table that keeps the history of changes done to BEx queries?
-
I create an oval and set it to be 10 inches in diameter as follows: var thisDoc = app.documents.add(); thisDoc.documentPreferences.pageHeight = "11i"; thisDoc.documentPreferences.pageWidth = "11i"; thisDoc.documentPreferences.pageOrientation = PageOr
-
Html code for quicktime audio stream
I am looking for the html code to play mp3-audio files on a website. I used to write it with the <embed>-tag, but this does not work in modern browsers like firefox 8 or opera 11.5. Perhaps someone can help me. Thanks in advance.
-
Double-click running of video files has stopped working in Snow Leopard
Just updated to Snow Leopard and now I can't run QuickTime via a double click on a video file in an iPhoto 08 event. If I use Show File to bring up the Finder, then I can run with QuickTime X. Who wants to do that every time?? Anyone know the answer?
-
Hi I have a 2node RAC Setup 10gR2. I have three ASM Volumes configured, out of devices sdb2, sdb3, sdb4 /etc/init.d/oracleasm createdisk VOL1 /dev/sdb2 /etc/init.d/oracleasm createdisk VOL2 /dev/sdb3 /etc/init.d/oracleasm createdisk VOL3 /dev/sdb4. w