Aperture 3 is showing nothing! none of my projects, no previews, no masters, no star rated, everything gone.

I have been working with aperture 3 for 2.5 years now and have run into a major problem, most probably my fault.
I have been working with my masters stored on an external hard drive. After some time I was not happy with the way it was organized, (in hindsight I should have left it alone as it was working great just a bit untidy!) so I tried to change it by creating a single folder on the external and then through aperture I used the relocate originals option to move them into the folder, which it seems to have done, but (BIG BUT!), aperture asked me to update the library after all the masters were moved, now when I open aperture there is nothing I mean nothing... no previews, no masters, no projects, albums, star ratings nothing....
Initially aperture was opening and just not displaying anything, I then tried opening different library files that it seemed to have created (or i created unknowingly??) and then finaly it would not open at all, giving me a "you do not have permissions" error message and would then just close. I then used the aperture first aid function but when i selected repair permissions the same error message would come up and the same happened with the other 2 options in the first aid function.
I have now used time machine to restore to a date just before the diaster but all it solved is that now aperture opens again but still does not display anything.
I seem to have all the masters in the folder that aperture moved them to, but I am worried that I have lost all the preview files that contain all the adjustments I have made to the images so I do not want to just re-import all the masters as I think there must be a way of retrieving the previews. I have done alot of work on a lot of photos and i am scared i have lost it all, not the masters just the work done on them
Tried to clean my room and ended up blowing up my house!
I hope someone can help me out.

Have you tried actually double clicking the library(s) to open Aperture?
It probably won't make a difference but you should try doing each in turn.
Also what version of Aperture? Check to make sure there are no filters set that are keeping the images from displaying.
It's hard to follow your first post. I've reread it a number of times and I'm still not sure of just what the chain of events were. If you could explain again what you did and what happened it might help to figure out hat is going on. I'm especially confused by the part where you say after you relocated the masters you had to upgrade your library. Did you upgrade Aperture at that point?
Message was edited by: Frank Caggiano

Similar Messages

I imported events from iphoto into aperture and aperture is showing 2 photos for each picture, one original and one edited although none of the photos from iphoto had been edited. Any idea why this has happened and what I need to do to prevent this.

I imported several events for iPhoto into Aperture3 and in Aperture it shows two photos for each photo imported, one original and one edited although none of the photos imported were edited. Why has this happened and what do I need to do to prevent this in future. I have only recently got Aperture and am trying to learn as I go along using the Focal Press guide. Thanks for any help.

Ir. Bob wrote:
A photo that was rotated in iPhoto will also show up as iPhoto edited.
This is not what I found to be the case in a recent experiment using iPhoto11- I did repeat it to be sure.
https://discussions.apple.com/message/15586837#15586837
Quickly, what I found is that only the ones I did actual adjustments on brought over two images. Images that were simply rotated, had "quick fixes" or "Effects" did not bring in two images. More importantly, among the ones with adjustments that did bring in two images, the ones with the keyword "iPhoto Edited" appear to be nothing more than iPhoto's 6MB JPEG Previews. The master was a 25MB RAW image.
I don't know why some users are experiencing doubles on everything, but I recommend caution in deciding which ones to remove or you may find yourself deleting masters and keeping previews.
DLS

I'm using ver. 3.4.5. After having a problem importing some photo's I now have all my library showing up in the one project. I'm worried about just deleting this project in total. Any help would be appreciated

After importing a small group of photo's I noticed that aperture didn't create a project for them as usual. The only place I could see them was in last imported. While last importwas open I selected the photo's and told aperture to creat a new project using the selected one's. I named the project with the date using all cap's so I would know which one it was. What I have now is my whole library showing up in this one project. If I import more pictures It does two things. A new project is created as it normally does. These new thumbnails also show up in the problem project. I tested to see what would happen if I deleted one old picture while the problem project was open. It went to the trash. It was also removed from its original project. If I ignore this what seems to happen when importing at this time is that a new project is created that you can open, it acts normal. The file only contains the correct amount pictures. If I then go to the problem project the thrumbnails show here also.
About 6 mos ago I switch to Aperture from iphoto. I never combined the two libraries. I have around twelve thousand photo's. December 1st I backed up my imac with Time Machine. I don't want to back up again until I get this problem in check.
Thanks for any help, Dale

Hi Andy,
I'm using Mac OSX 10.7.5
No the one with the caps seems to be working normally.This project with the caps now has four files. Originally I created it with about fifteen. I deleted eleven of them and edited the remaining four. The four files each have one version and its original. It wasn't until after I completed this work that I noticed the privious project when opened and scrolled had the entire library in it.
The test I did went like this. With the problem opened I deleted one file that I new existed prior to this problem. I than opened that project that I new it was from to see if it got deleted and found it gone and moved to trash. I think that tells me that if I delete all the files in the problem project I'll be in trouble. I also have inported to projects each with one file that I edited. They are working fine. I took a look in the problem project and this last
two imports show the thumdnails in it.
Currently on my Hard Drive I have 275 GB free space. My photo's take up 138 GB. As I said on Dec. 1st I backed up the system using time machine. So all of Dec. and part of Jan. inports won't be on it. I could work around the problem project and move those file to a safe place. I think it best not to back up the system with Time Machine until I'm confident the Aperture is runing properly. I'm happy that I control these system backups manually.
I'll need to find out how to copy the Aperture library to another place. I'm sure I can poke around and fined out the process.
Thanks Andy for the come back!

In the middle of my Aperture slide show the color set on the custom text has locked to an old color I was using and will not go to a new color (white)

In the middle of creating my second Aperture slide show I find I cannot change the color of the text (even though I select it in selected slides & default slides and in various colors choices) to a new one. The first color that I was using keeps appearing. Where is the solution please ?

I personally like to Crop, and then use PNG for my screen-caps. If I need more images, say to show other Palettes, etc., then I do one each for those shots.
We see a lot of full-screen caps posted, where aggressive JPEG is used, and nothing can be read. That is especially true with images, like Adobe Encore's Flow-chart, where there is a lot of text and linking being shown.
Just my personal preferences.
Hunt

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

PHP installed with Apache, php pages showing nothing [SOLVED]

I've followed a couple of guides to install a LAMP stack on my Arch install, and I seem to have done everything correctly (no errors anyway...), but I still can't see anything on my basic phpinfo page.
Viewing source shows nothing.
Is there anything commonly missed out I should be looking for, in order to get it showing properly?
If there's any more specific information I can give, please let me know. I'm new to these forums and realise I'm lacking detail, but any pointers would be greatly appreciated.
Thanks,
Adam
Last edited by tsdadam (2015-02-26 22:03:56)

Here's my httpd.conf, I've not moved those lines yet,
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
#LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all granted
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
#Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
LoadModule php5_module modules/libphp5.so
AddHandler php5-script php
Include conf/extra/php5_module.conf

New K8T Neo won't boot. D-Bracket LEDs show nothing.

I just bought my first AMD based system, maybe I forgot to do something? I've read the manual but I don't feel that I've missed anything.
Anyway I've connected the ATX 12V & the ATX 20-Pin Power Connectors. I also connected that D-Bracket thingy, a GeForce2MX and one 512MB Ram in DDRslot 1. I have no harddrives or anything else connected, I just want to see if my system works.
When I try to boot the FANs go on but that's it.
The leds on the D-Bracket shows nothing.
I get nothing on my monitor.
I can only turn the computer off by disconnecting the power cable.
I've tried to unplug->plug it back together. No luck. I've also tried it with no RAM at all = no difference.
CPU: A64 3000+
MB: MSI K8T NEO-FSR
RAM: Corsair Value S. PC3200 DDR-DIMM 512MB - Unbuffered, Non-parity, 64Megx64, CL2.5
PSU: AntecTruePower380W +5V@35A +12V@18A +3.3V@28A
Is my PSU too weak or may something be broken?
Thanks.
UPDATE: My MB was offically defective

My manual says Release Date: September 2003.
I have IDE info @ 2-21 in my manual. Power LED flashing info in "Front Panel Connectors: JFP1 & JFP2" section.
What the grey power-led-flash-box says:
"MSI Reminds You...
If the Power LED on the front panel flashes every two seconds, this signal tells you that one of the power connection has been protected; if the Power LED flashes every one second, it tells you the CPU has been protected due to overheating. To refresh the system, please disconnect the power cable from the computer, and then reconnect the power cable to the computer again in at least five seconds."
D-Bracked shows no lights at all. There's two ways to connect the D-Bracked and I tried them both. My fans works perfectly everytime I boot. Too bad they are the only things that work though

Question about Aperture slide shows

Question about Aperture slide shows. How can I eliminate banding in a blue sky when photos are displayed in Aperture Slide shows?

What kind of banding? Do you have a screenshot?
It could be jpg compression related, I think the previews are all jpgs.

HT201272 i can't see my purchased apps in itunes on new ipad when I go into the itunes store. It shows nothing. I haven't changed my ID or country of purchase. It shows that I would have to rebuy them when I go into the store.

i can't see my purchased apps in itunes on new ipad mini. when I go into the itunes store. It shows nothing. I haven't changed my ID or country of purchase. It shows that I would have to rebuy them when I go into the store. Is there something in settings on Itunes I need to change? I do not have cloud.

Yes I am looking in the app store. When I look in Itunes on my computer and look at purchased apps it is there. And when I go on my other device and look at apps purchased all apps are there.
The new ipad doesn't show any apps purchased when I click on apps purchased and when I search the app store it doesn't show it is purchased. I am wondering if I am just missing something...need to turn something on in options or something. Never had this problem with previous ipad when I set it up.

My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!

My iPhone 4 is shut off and wont turn back on, unless i plug it in an outlet & when i do that it says "connect to Itunes" & then i do that and the phone wont turn on & it shows nothing is plugged in . HELP!
& it keeps trying to turn on but it wont . like the apple logo pops up for a minute , then turns off.

Had exact same problem. Rang Apple support and various apple repairers. All of them said in effect, too bad, you'll have to lose everything since your last backup. It's a work phone with very important stuff on it and the latest backup was on a computer that had a virus. Convergence of crap :/
Happened to talk to a friend who said to try replacing the battery. Did that. Problem fixed. All data saved.
To all Apple support people: rather than say 'once it's in recovery mode you lose all data' try saying 'replace your battery and see if that works first'!!!!

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing

I have a ipod classic 160GB , the problem with it is that it is dead no respond at all, i even tried to do a hard reboot, i tried to connect to itunes but it did not work, if somebody has a solution please let me know! the screen on the ipod shows nothing........

This is the iPod touch forum. I will request that you post be moved to the iPod Classic forum.

[Forum FAQ] Configuration Manager Console shows nothing if you change SSRS to using SSL after Reporting Service Point is installed

If the SSRS is changed to SSL mode and http binding is removed after Reporting Service Point is installed. The Configuration Manager Console shows nothing in Reporting Pane. After digging into this problem, the cause is that the SSRS information has not
been updated in Configuration Manager Database. The following steps are taken for finding the root cause.
1. After changing to SSL, the Reporting Service Point log shows the error as shown in Figure 1.
The request failed with HTTP status 404: Not Found.
(!) SRS not detected as running
Failures reported during periodic health check by the SRS Server DB2.SCJIZHO.COM.
Figure 1
From the error, seems the cause was the Reporting Service Point detected a wrong port. We digged around in Registry and found the information is a Registry key named ReportServerUri at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP. After changing the Report
Server address to https. The error is gone as shown in Figure 2. But the issue remains, the Console still shows nothing. It is not a right direction.
Figure 2
2. Open the Console log file, it also shows some valuable information.
instance of __ExtendedStatus
                Operation = "ExecQuery";
                ParameterInfo = "SELECT * FROM SMS_Site WHERE SiteCode = 'PRI'";
                ProviderName = "WinMgmt";
\r\n
[1, PID:3136][04/24/2014 01:46:00] :Property: 'LastModifiedTime'\r\nSystem.Management.ManagementException\r\nNot found \r\n   at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
   at System.Management.PropertyData.RefreshPropertyInfo()
   at System.Management.PropertyDataCollection.get_Item(String propertyName)
   at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlResultObjectBase.get_Item(String name)\r\nManagementException details:
[52, PID:3136][05/11/2014 20:14:15] :[ReportProxy] - User-specified default Reporting Point [PRI.scjizho.com] could not be found, [DB2.scjizho.com] is now the default Reporting Point (Figure 3).
Figure 3
It seems the Console wants to access the old http site and it fails to get into the site for sure. Actually, the Site Configuration information is come from Site Control File and as we all know that ConfigMgr 2012 doesn’t store the Site Control file in the
file system. However, it’s stored in the SQL database (as XML file). The XML file is stored in a view named vSMS_SC_SiteControlXML. This view is a read-only view. We cannot edit it directly. The related table stored the SSRS information for this view is SC_SysResUse_Property.
Running the following query will list the SSRS address. We can see the address is still the old one. This is why the Console shows nothing.
SELECT
name,
value2
FROM dbo.SC_SysResUse_Property
where name
='ReportServerUri'
or name=
'ReportManagerUri'
Remarks:
This article is just to let you know why the Console cannot show the Reports after changing to SSL mode. We do not intend to make you change the table in Database, if you want to change it, you will be at your own risk. The real solution to this situation
is to reinstall your Reporting Service Point.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Ok, but how do you solve this problem? Does uninstalling the RP and adding it back solve this problem?
http://www.enhansoft.com/

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro

In Premiere Elements 8, None of my projects will open. Says projects were created in Premiere Pro, when they were not. Cannot create new projects either. Basically, the program is completely bricked an unable to do anything once it gets past the welcome screen.
My projects are all saved as .prel
They were all working, when suddenly none of them would work any more. I can no longer use this program, and I really need to. Have already tried running the program as an administrator and creating a second admin account. Also tried going to the basic graphics driver.

GB-92
Thanks for the helpful additional information. Because of the nature of the description of your problem (references to Premiere Pro which you do not have et al), I would encourage you to go directly to the following which I suggested previously by the following question.
5. Have you gone the route of Uninstall/ccleaner run through - regular and registry components of the cleaner), reinstall?
1. Uninstall Premiere Elements 8 via the usual Control Panel/Installed Program area route.
2. Download and install the free ccleaner and run the computer through its regular cleaner and registry cleaner parts.
http://www.piriform.com/ccleaner
Open the program to see something like
Click on "Run Cleaner" with the "Cleaner Tab" selected in the left column of the dialog. Click OK to the pop up to initiate the automatic process.
After the regular cleaner portion is done, then click on "Registry" in the left column of the dialog. It should look something like
Click on "Scan for Issues"
when done
Click on "Fix selected issues"
when pop up appears
Click Yes to "backup changes to the registry"
when done
Click "Fix selected issues" in the pop up that now appears
when done
Click Close.
Please read all the details in the ccleaner link before starting. If you need clarification on anything written before you begin, please do not hesitate to ask.
I use this procedure routine for computer maintenance without issues (Windows XP 32 bit as well as Windows 7, 8, and 8.1 64 bit). It is a widesly used tool.
We will be watching for further developments.
3. Reinstall Premiere Elements 8 with antivirus and firewalls off. After installation of 8, now do the download and installation of the 8.0.1 update from Adobe via the link
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4653
That 8.0.1 installation can be done with Premiere Elements 8 closed.
Adobe set up that 8.0.1 Update so that they is no 8.0.1 shown in the program after installation of it. You will probably get a message of installation completed successful. The major evidence that it has been installed will be the turn off of the previously default "Automatic Background Rendering" in preferences. You still have to turn off the "Automatic AutoAnalzyer" in Elements Organizer, a must do.
Please review the above.
Thank you.
ATR

How to arrange photos in Aperture slide shows to the beat of the music?

Is there anyone that knows how to arrange photos to the beat of the music in Aperture slide shows? I have tried to do a search for this topic, looked at "help" and still can get things to work properly. The "beat of music" command seems to be grayed out. Is there a bug in the software? Any help would be appreciated.

I have been following this thread with great interest. I have tried to do this in Aperture as well. Jumping ahead just a bit to what might be David's next issue, once we figure out why the option is not available to him.
For me once the music has been added the " Align slide to the beat" is available. However it doesn't seem to do anything.
I have accomplished this in iMovie and Final Cut Express. In both of these programs you have to actually mark the beats for things to work. You mark the beats and the software sets the play duration to match. This is pretty easy in iMovie. I am hoping for a similar or better interface in Aperture 3. How is this accomplished in Aperture?

Please help!! I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

I got my iPhone 4s screen fixed, now in my Photos it shows nothing, although in my memory usage it shows 10.5gb of photos, thats 2000 photos not showing up. What happened?! Where did all my photos go?!

WOOHOO!!! i finaly fixed the problem. Here is what to do:
Chances are if you did the same thing as me you either have
A) No album names at all for ALL your songs in your library
or
B) Have the same name for every album for ALL your songs in your library.
Here is how to fix it (yah it will take a little work but its worth getting your iPod functioning properly).
Unless you dont want to have to go and actualy set al lthe album names for every song here is what you can do:
Go through to iTunes and arange your songs by Artist name. Click the top song for your first artist, hold Shift and click the last song for that same artist (to multi select all the songs for the artist) go into get info and check the Album box. Copy the name of the artist to the Album box and hit ok.
Now when u update your ipod and go into ur Artists section the actual Artist name should show up instead of the song names.
For some reason having the same album name for all your songs messes up the organization of the iPod.
Hope this helps anyone else that is having the same problem

Aperture 3 is showing nothing! none of my projects, no previews, no masters, no star rated, everything gone.

Similar Messages

Maybe you are looking for