Aperture 3 not responding.
After this one update, I forgot the exact name of the update, the one about the RAM usage of PRO applications; Aperture just suddenly stops responding and I can't do anything with my libraries. I tried uninstalling and reinstalling but the same thing happens. I can open Aperture, can have a peek at all my projects, albums and folders, but then the beach ball of death arrives and there's nothing that I can do.
Anyone who knows a way around this?
I forgot that would do it too. I trashed the whole app in a rush - with appcleaner - and downloaded it again.
But deleting the plist file should be doing it for most people. (how could I not think about that)
On second thought, I experience still the same like before.
Message was edited by: Kevin Paquet
Similar Messages
-
Aperture not responding after using a sharpening brush
anyone have a problem with aperture not responding after makeing a mod to a pic
What is your Aperture version? Aperture 2 and 1 do not work well with MacOS X 10.9.3.
-
Repairing Library causes Aperture NOT RESPONDING
Upon the recent "update" from Apple concerning Aperture 3.4:
I installed the update on 9/20.
When I open my massive 1.16 TB Aperture library, I get this message:
Click Repair.
Then this message:
Then this message:
Since then, Aperture has been repairing my massive 1.16 TB library for ~ 5 hours until it gets to 77% and then "Aperture Not Responding".
I have to Force Quit.
Open Aperture again and then this message:
Click Restore Windows
Then this message:
Click Repair.
Then this message:
Then, the cycle begins again until it gets to 77% in about ~5 hours
Then "Aperture Not Responding".
I have to Force Quit.
And so on.
So, I deleted Aperture from hard drive
Re-Install Aperture 3.0 from cd/dvd
Open Aperture...with BRAND new library. Fine. Except it is not MY library.
Close Aperture.
Open Massive Aperture Library
Get this message:
Select Quit
Close Aperture
Update Aperture to 3.4
Open Aperture with massive library
This message: Aperture has detecteed inconsistincies in your library. Please click Repair to avoid any potential problems.
Click Repair
Then, the cycle begins again until it gets to 77% in about ~5 hours
Then "Aperture Not Responding".
I have to Force Quit.
Of course I send the Report to Apple. Every time.
And so on and on and on and on. For THREE DAYS already.
My Mac Pro has been a brick and unusable since it is hogging the cpu with this Aperture update.
Check back to the Apple Discussion Forums
Get this message:
We'll be back soon. We are busy updateing Apple Support Communities for you and will be back shortly.
Yeah.
Repeat all the steps above for 2-3 times per day for 3 days.
Tanja <><
That's my story and I'm sticking to it!Here is my crash log:
Date/Time: 2012-09-23 11:56:08 -0500
OS Version: 10.7.5 (Build 11G56)
Architecture: x86_64
Report Version: 9
Command: Aperture
Path: /Applications/Aperture.app/Contents/MacOS/Aperture
Version: 3.4 (3.4)
Build Version: 1
Project Name: Aperture
Source Version: 301036000000000
Parent: launchd [134]
PID: 1925
Event: hang
Duration: 1.81s
Steps: 19 (100ms sampling interval)
Pageins: 0
Pageouts: 0
Process: Aperture [1925]
Path: /Applications/Aperture.app/Contents/MacOS/Aperture
Architecture: x86_64
UID: 501
Thread 0x3d6f7 DispatchQueue 438
User stack:
19 ??? (in Aperture) [0x107efa314]
19 ??? (in Aperture) [0x107efa9c2]
19 NSProApplicationMain + 387 (in ProKit) [0x109408be1]
19 -[NSApplication run] + 470 (in AppKit) [0x7fff915509b9]
19 ??? (in Aperture) [0x10835f00d]
19 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135 (in AppKit) [0x7fff9155407d]
19 _DPSNextEvent + 1247 (in AppKit) [0x7fff915549c5]
19 AEProcessAppleEvent + 102 (in HIToolbox) [0x7fff95208b69]
19 aeProcessAppleEvent + 250 (in AE) [0x7fff8c9939f7]
19 _ZL25dispatchEventAndSendReplyPK6AEDescPS_ + 38 (in AE) [0x7fff8c993b03]
19 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 200 (in AE) [0x7fff8c993c25]
19 _NSAppleEventManagerGenericHandler + 105 (in Foundation) [0x7fff9286f5dc]
19 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 283 (in Foundation) [0x7fff9286f74e]
19 __-[NSAppleEventManager setEventHandler:andSelector:forEventClass:andEventID:]_block_invoke_1 + 101 (in Foundation) [0x7fff928707c7]
19 -[NSObject performSelector:withObject:withObject:] + 65 (in CoreFoundation) [0x7fff8d326541]
19 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 307 (in AppKit) [0x7fff915575a2]
19 -[NSApplication(NSAppleEventHandling) _handleAEOpenDocumentsForURLs:] + 325 (in AppKit) [0x7fff91796bac]
19 -[NSApplication _sendFinishLaunchingNotification] + 78 (in AppKit) [0x7fff91558b91]
19 -[NSApplication _postDidFinishNotification] + 212 (in AppKit) [0x7fff91558e2b]
19 -[NSNotificationCenter postNotificationName:object:userInfo:] + 65 (in Foundation) [0x7fff92839fc3]
19 _CFXNotificationPost + 2634 (in CoreFoundation) [0x7fff8d2dc7ba]
19 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 47 (in Foundation) [0x7fff9284dd0e]
19 ??? (in Aperture) [0x107f4686c]
19 ??? (in Aperture) [0x107f45ae8]
19 -[RKDatabaseComponent openDatabaseForLibraryPath:options:] + 367 (in RedRock) [0x1088ec868]
19 -[RKDatabase openDatabaseWithOptions:] + 8421 (in RedRock) [0x1088efa7a]
19 +[RKRecoverMgr repairDatabaseOnThisThread:] + 76 (in RedRock) [0x108a7c8d0]
19 -[RKRecoverMgr repairDatabaseOnThisThread] + 1479 (in RedRock) [0x108a7cf31]
19 -[RKRecoverMgr rebuildVersions] + 2436 (in RedRock) [0x108a6b968]
19 -[RKRecoverMgr repairVersions] + 120 (in RedRock) [0x108a734b1]
19 -[RKRecoverMgr ensureAllManagedFilesHaveMasters] + 4003 (in RedRock) [0x108a7033b]
19 +[HgModel modelsFromDatabase:where:] + 195 (in iLifeSQLAccess) [0x10a1f9660]
19 -[HgEntity modelsFromQuery:] + 617 (in iLifeSQLAccess) [0x10a2248fa]
19 -[HgEntity _dispatch_sync_if_needed_suspend:withBlock:] + 226 (in iLifeSQLAccess) [0x10a222f69]
19 _dispatch_barrier_sync_f_slow + 226 (in libdispatch.dylib) [0x7fff93915fd3]
19 __55-[HgEntity _dispatch_sync_if_needed_suspend:withBlock:]_block_invoke_0 + 19 (in iLifeSQLAccess) [0x10a222faf]
19 __28-[HgEntity modelsFromQuery:]_block_invoke_0 + 165 (in iLifeSQLAccess) [0x10a224b08]
19 -[HgEntity loadModelsFromResultSet:limit:] + 124 (in iLifeSQLAccess) [0x10a1f4f12]
19 -[HgKResultSet next] + 262 (in iLifeSQLAccess) [0x10a1f0e0b]
19 sqlite3_step + 2420 (in iLifeSQLAccess) [0x10a1c8bea]
17 sqlite3VdbeExec + 34145 (in iLifeSQLAccess) [0x10a1d1445]
17 sqlite3VdbeCursorMoveto + 43 (in iLifeSQLAccess) [0x10a1e2805]
11 sqlite3BtreeMovetoUnpacked + 698 (in iLifeSQLAccess) [0x10a1f151a]
11 moveToChild + 68 (in iLifeSQLAccess) [0x10a1e2763]
11 getAndInitPage + 66 (in iLifeSQLAccess) [0x10a1e2351]
11 btreeGetPage + 30 (in iLifeSQLAccess) [0x10a1d496b]
11 sqlite3PagerAcquire + 111 (in iLifeSQLAccess) [0x10a1d4a18]
11 sqlite3PcacheFetch + 193 (in iLifeSQLAccess) [0x10a1d4c0d]
9 pcache1Fetch + 46 (in iLifeSQLAccess) [0x10a1d4f38]
9 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbf2]
2 pcache1Fetch + 798 (in iLifeSQLAccess) [0x10a1d5228]
2 __psynch_mutexdrop + 10 (in libsystem_kernel.dylib) [0x7fff9518cbde]
6 sqlite3BtreeMovetoUnpacked + 122 (in iLifeSQLAccess) [0x10a1f12da]
6 moveToRoot + 102 (in iLifeSQLAccess) [0x10a1e21b9]
6 sqlite3PagerUnref + 20 (in iLifeSQLAccess) [0x10a1e4edb]
4 __psynch_mutexdrop + 10 (in libsystem_kernel.dylib) [0x7fff9518cbde]
2 pcache1Unpin + 37 (in iLifeSQLAccess) [0x10a1e4f9f]
2 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbf2]
1 sqlite3VdbeExec + 32076 (in iLifeSQLAccess) [0x10a1d0c30]
1 sqlite3VdbeExec + 26640 (in iLifeSQLAccess) [0x10a1cf6f4]
1 sqlite3VdbeMemRelease + 13 (in iLifeSQLAccess) [0x10a1e2ce1]
Kernel stack:
15 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002daea3]
14 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005ce4cb]
8 psynch_mutexwait + 1404 (in mach_kernel) [0xffffff80005a3f5c]
8 ksyn_block_thread_locked + 90 (in mach_kernel) [0xffffff800059dfda]
4 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
4 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
4 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
4 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
4 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f42b]
4 thread_continue + 1435 (in mach_kernel) [0xffffff800022f0cb]
4 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
4 psynch_mutexdrop + 91 (in mach_kernel) [0xffffff80005a39cb]
2 psynch_mutexdrop_internal + 837 (in mach_kernel) [0xffffff800059f015]
2 wait_queue_wakeup_one + 293 (in mach_kernel) [0xffffff80002402d5]
2 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
1 psynch_mutexdrop_internal + 151 (in mach_kernel) [0xffffff800059ed67]
1 lck_mtx_lock + 10 (in mach_kernel) [0xffffff80002b51da]
1 psynch_mutexdrop_internal + 1992 (in mach_kernel) [0xffffff800059f498]
1 lck_mtx_unlock + 169 (in mach_kernel) [0xffffff80002b5869]
1 psynch_mutexwait + 284 (in mach_kernel) [0xffffff80005a3afc]
1 ksyn_wqfind + 1422 (in mach_kernel) [0xffffff800059fa9e]
1 lck_mtx_unlock + 169 (in mach_kernel) [0xffffff80002b5869]
1 psynch_mutexdrop + 69 (in mach_kernel) [0xffffff80005a39b5]
1 ksyn_wqfind + 90 (in mach_kernel) [0xffffff800059f56a]
1 current_thread + 0 (in mach_kernel) [0xffffff80002be1c0]
1 unix_syscall64 + 236 (in mach_kernel) [0xffffff80005ce3bc]
2 hndl_allintrs + 290 (in mach_kernel) [0xffffff80002da712]
2 interrupt + 192 (in mach_kernel) [0xffffff80002c48d0]
2 lapic_interrupt + 121 (in mach_kernel) [0xffffff80002c9ab9]
2 cpu_signal_handler + 172 (in mach_kernel) [0xffffff80002cb9ac]
2 sync_iss_to_iks + 118 (in mach_kernel) [0xffffff80002c3c76]
2 call_continuation + 23 (in mach_kernel) [0xffffff8000820057]
2 psynch_mtxcontinue + 345 (in mach_kernel) [0xffffff800059ec79]
1 ksyn_wqrelease + 43 (in mach_kernel) [0xffffff800059e67b]
1 lck_mtx_lock + 44 (in mach_kernel) [0xffffff80002b51fc]
1 ksyn_wqrelease + 672 (in mach_kernel) [0xffffff800059e8f0]
1 zfree + 1134 (in mach_kernel) [0xffffff80002435ee]
1 lck_mtx_unlock + 169 (in mach_kernel) [0xffffff80002b5869]
Thread 0x3d711 DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
18 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
1 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002daea3]
1 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005ce4cb]
1 kevent + 54 (in mach_kernel) [0xffffff800053cbe6]
1 kevent_description + 1528 (in mach_kernel) [0xffffff800053cac8]
1 kqueue_scan + 208 (in mach_kernel) [0xffffff800053b400]
1 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
1 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
1 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
1 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
Thread 0x480eb DispatchQueue 630
User stack:
19 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
19 _pthread_wqthread + 316 (in libsystem_c.dylib) [0x7fff8c5b23da]
19 _dispatch_worker_thread2 + 198 (in libdispatch.dylib) [0x7fff93914928]
19 _dispatch_queue_invoke + 54 (in libdispatch.dylib) [0x7fff9391512e]
19 _dispatch_queue_drain + 264 (in libdispatch.dylib) [0x7fff939152d2]
19 _dispatch_call_block_and_release + 18 (in libdispatch.dylib) [0x7fff93913a82]
19 __46-[HgEntity _dispatch_async_suspend:withBlock:]_block_invoke_0 + 19 (in iLifeSQLAccess) [0x10a223151]
19 __35-[HgEntity executeUpdate:withArgs:]_block_invoke_0 + 36 (in iLifeSQLAccess) [0x10a221a20]
19 -[HgKPreparedSql updateWithArgs:] + 230 (in iLifeSQLAccess) [0x10a1e8d29]
19 sqlite3_step + 2420 (in iLifeSQLAccess) [0x10a1c8bea]
19 sqlite3VdbeExec + 34145 (in iLifeSQLAccess) [0x10a1d1445]
19 sqlite3VdbeCursorMoveto + 43 (in iLifeSQLAccess) [0x10a1e2805]
10 sqlite3BtreeMovetoUnpacked + 698 (in iLifeSQLAccess) [0x10a1f151a]
10 moveToChild + 68 (in iLifeSQLAccess) [0x10a1e2763]
10 getAndInitPage + 66 (in iLifeSQLAccess) [0x10a1e2351]
10 btreeGetPage + 30 (in iLifeSQLAccess) [0x10a1d496b]
10 sqlite3PagerAcquire + 111 (in iLifeSQLAccess) [0x10a1d4a18]
10 sqlite3PcacheFetch + 193 (in iLifeSQLAccess) [0x10a1d4c0d]
9 pcache1Fetch + 46 (in iLifeSQLAccess) [0x10a1d4f38]
9 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbf2]
1 pcache1Fetch + 798 (in iLifeSQLAccess) [0x10a1d5228]
1 __psynch_mutexdrop + 10 (in libsystem_kernel.dylib) [0x7fff9518cbde]
9 sqlite3BtreeMovetoUnpacked + 122 (in iLifeSQLAccess) [0x10a1f12da]
9 moveToRoot + 102 (in iLifeSQLAccess) [0x10a1e21b9]
9 sqlite3PagerUnref + 20 (in iLifeSQLAccess) [0x10a1e4edb]
6 pcache1Unpin + 37 (in iLifeSQLAccess) [0x10a1e4f9f]
6 __psynch_mutexwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbf2]
2 __psynch_mutexdrop + 10 (in libsystem_kernel.dylib) [0x7fff9518cbde]
1 pthread_mutex_unlock + 280 (in libsystem_c.dylib) [0x7fff8c5af6b7]
Kernel stack:
18 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002daea3]
18 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005ce4cb]
13 psynch_mutexwait + 1404 (in mach_kernel) [0xffffff80005a3f5c]
11 ksyn_block_thread_locked + 90 (in mach_kernel) [0xffffff800059dfda]
9 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
7 thread_go + 597 (in mach_kernel) [0xffffff800022e055]
7 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
2 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
2 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
2 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
2 thread_block_reason + 299 (in mach_kernel) [0xffffff800022f42b]
2 thread_continue + 1435 (in mach_kernel) [0xffffff800022f0cb]
1 ml_set_interrupts_enabled + 43 (in mach_kernel) [0xffffff80002be34b]
1 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
2 ksyn_block_thread_locked + 50 (in mach_kernel) [0xffffff800059dfb2]
2 assert_wait_deadline + 460 (in mach_kernel) [0xffffff800022fb0c]
2 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
3 psynch_mutexdrop + 91 (in mach_kernel) [0xffffff80005a39cb]
2 psynch_mutexdrop_internal + 837 (in mach_kernel) [0xffffff800059f015]
2 wait_queue_wakeup_one + 293 (in mach_kernel) [0xffffff80002402d5]
2 ml_set_interrupts_enabled + 23 (in mach_kernel) [0xffffff80002be337]
1 psynch_mutexdrop_internal + 1992 (in mach_kernel) [0xffffff800059f498]
1 lck_mtx_unlock + 71 (in mach_kernel) [0xffffff80002b5807]
2 psynch_mutexwait + 284 (in mach_kernel) [0xffffff80005a3afc]
2 ksyn_wqfind + 1367 (in mach_kernel) [0xffffff800059fa67]
1 lck_mtx_lock + 44 (in mach_kernel) [0xffffff80002b51fc]
1 lck_mtx_lock + 453 (in mach_kernel) [0xffffff80002b5395]
1 _rtc_nanotime_read + 24 (in mach_kernel) [0xffffff80002beb48]
1 hndl_allintrs + 290 (in mach_kernel) [0xffffff80002da712]
1 interrupt + 192 (in mach_kernel) [0xffffff80002c48d0]
1 lapic_interrupt + 121 (in mach_kernel) [0xffffff80002c9ab9]
1 cpu_signal_handler + 172 (in mach_kernel) [0xffffff80002cb9ac]
1 sync_iss_to_iks + 118 (in mach_kernel) [0xffffff80002c3c76]
Thread 0x3d71a
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3d71b
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3d71c
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3d71d
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3d71e
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3d71f
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 -[XTThread run:] + 329 (in ProXTCore) [0x10a0d5282]
19 -[XTMsgQueue waitForMessage] + 47 (in ProXTCore) [0x10a0d603a]
19 -[NSConditionLock lockWhenCondition:beforeDate:] + 251 (in Foundation) [0x7fff9288a22e]
19 -[NSCondition waitUntilDate:] + 371 (in Foundation) [0x7fff928c0a5c]
19 __psynch_cvwait + 10 (in libsystem_kernel.dylib) [0x7fff9518cbca]
Kernel stack:
19 psynch_cvcontinue + 0 (in mach_kernel) [0xffffff800059e920]
Thread 0x3e0b7
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
16 -[NSUIHeartBeat _heartBeatThread:] + 1727 (in AppKit) [0x7fff9178911b]
16 usleep + 53 (in libsystem_c.dylib) [0x7fff8c566bb5]
16 __semwait_signal + 10 (in libsystem_kernel.dylib) [0x7fff9518ce42]
2 -[NSUIHeartBeat _heartBeatThread:] + 1311 (in AppKit) [0x7fff91788f7b]
2 -[NSProProgressIndicator heartBeat:] + 1791 (in ProKit) [0x109439244]
2 -[NSProProgressIndicator drawRect:] + 116 (in ProKit) [0x10943976d]
1 -[NSProgressIndicator drawRect:] + 1710 (in AppKit) [0x7fff91787133]
1 -[NSProProgressIndicator _drawThemeProgressArea:] + 386 (in ProKit) [0x10943a31c]
1 -[NSProProgressIndicator progressBarFillFacet] + 62 (in ProKit) [0x109438869]
1 +[NSProThemeFacet facetWithElement:part:fromTheme:] + 32 (in ProKit) [0x109517fdf]
1 +[NSProThemeFacet facetWithElement:part:dimension1:dimension2:fromTheme:] + 163 (in ProKit) [0x109517fb0]
1 +[NSProThemeFacet _facetWithKeyList:andRenditionKeyClass:orRenditionKey:fromTheme:] + 296 (in ProKit) [0x109517ba6]
1 calloc + 48 (in libsystem_c.dylib) [0x7fff8c60315d]
1 malloc_zone_calloc + 81 (in libsystem_c.dylib) [0x7fff8c602346]
1 szone_malloc_should_clear + 1115 (in libsystem_c.dylib) [0x7fff8c5cd00e]
1 tiny_malloc_from_free_list + 1073 (in libsystem_c.dylib) [0x7fff8c5cc72c]
1 -[NSProgressIndicator drawRect:] + 1693 (in AppKit) [0x7fff91787122]
1 -[NSProProgressIndicator _drawThemeBackground] + 97 (in ProKit) [0x10943a45e]
1 -[NSProThemeFacet drawInFrame:owner:userInfo:] + 63 (in ProKit) [0x10951bbe1]
1 -[NSProThemeFacet drawInFrame:alpha:owner:userInfo:] + 80 (in ProKit) [0x10951b641]
1 -[NSProThemeFacet drawInFrame:alpha:operation:owner:userInfo:] + 254 (in ProKit) [0x10951b311]
1 -[NSProThemeFacet _drawSpecificRenditionKey:inFrame:alpha:operation:isFocused:isFlipped:] + 416 (in ProKit) [0x109519edb]
1 DrawThreePartElementFromRenditionWithOperation + 307 (in ProKit) [0x1093f315b]
1 DrawThreePartImageWithOperationWithFocusVariant + 3031 (in ProKit) [0x1093f2c2f]
1 -[NSImage drawInRect:fromRect:operation:fraction:respectFlipped:hints:] + 1841 (in AppKit) [0x7fff915a6be7]
1 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 170 (in AppKit) [0x7fff915a70e9]
1 __-[NSImage drawInRect:fromRect:operation:fraction:respectFlipped:hints:]_block_invoke_1 + 1543 (in AppKit) [0x7fff915a8186]
1 -[NSImageRep drawInRect:fromRect:operation:fraction:respectFlipped:hints:] + 1212 (in AppKit) [0x7fff915a87ff]
1 __-[NSImageRep drawInRect:fromRect:operation:fraction:respectFlipped:hints:]_block_invoke_1 + 1525 (in AppKit) [0x7fff915a8fa9]
1 CGContextDrawImage + 434 (in CoreGraphics) [0x7fff8fe54e4e]
1 ripc_DrawImage + 1187 (in libRIP.A.dylib) [0x7fff9259f607]
1 ripc_RenderImage + 319 (in libRIP.A.dylib) [0x7fff92597d67]
1 ripl_BltImage + 1561 (in libRIP.A.dylib) [0x7fff925985c3]
1 ripl_Mark + 23 (in libRIP.A.dylib) [0x7fff9259860c]
1 argb32_image + 7521 (in CoreGraphics) [0x7fff8fdcdbe1]
1 argb32_image_mark + 1036 (in CoreGraphics) [0x7fff8fe5a0c3]
1 argb32_sample_ARGB32 + 1791 (in CoreGraphics) [0x7fff8fe68603]
1 -[NSUIHeartBeat _heartBeatThread:] + 1444 (in AppKit) [0x7fff91789000]
1 -[NSSurface flushWithOptions:] + 253 (in AppKit) [0x7fff91619943]
1 CGSFlushSurfaceWithOptions + 346 (in CoreGraphics) [0x7fff8fec7229]
1 _CGSGetSurfaceBinding + 144 (in CoreGraphics) [0x7fff8fec7349]
1 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
13 semaphore_wait_continue + 0 (in mach_kernel) [0xffffff8000234650]
3 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002daea3]
3 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005ce4cb]
3 __semwait_signal_nocancel + 155 (in mach_kernel) [0xffffff80005545cb]
3 semaphore_timedwait_trap_internal + 135 (in mach_kernel) [0xffffff8000234f27]
3 semaphore_signal_internal + 944 (in mach_kernel) [0xffffff8000234b10]
3 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
3 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
3 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
3 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
2 hndl_allintrs + 290 (in mach_kernel) [0xffffff80002da712]
2 interrupt + 192 (in mach_kernel) [0xffffff80002c48d0]
2 lapic_interrupt + 121 (in mach_kernel) [0xffffff80002c9ab9]
2 cpu_signal_handler + 172 (in mach_kernel) [0xffffff80002cb9ac]
2 sync_iss_to_iks + 118 (in mach_kernel) [0xffffff80002c3c76]
1 hndl_mach_scall64 + 19 (in mach_kernel) [0xffffff80002daec3]
1 thread_set_child + 336 (in mach_kernel) [0xffffff80002aef10]
1 mach_msg_overwrite_trap + 442 (in mach_kernel) [0xffffff800021bcda]
1 ipc_mqueue_receive + 63 (in mach_kernel) [0xffffff800021587f]
1 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
1 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
1 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
1 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
Thread 0x4a361
User stack:
19 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
19 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
18 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
1 hndl_unix_scall64 + 19 (in mach_kernel) [0xffffff80002daea3]
1 unix_syscall64 + 507 (in mach_kernel) [0xffffff80005ce4cb]
1 workq_kernreturn + 695 (in mach_kernel) [0xffffff80005a61f7]
1 workqueue_mark_exiting + 5124 (in mach_kernel) [0xffffff80005a5f34]
1 thread_block_reason + 275 (in mach_kernel) [0xffffff800022f413]
1 thread_go + 608 (in mach_kernel) [0xffffff800022e060]
1 processor_idle + 149 (in mach_kernel) [0xffffff800022d375]
1 machine_idle + 289 (in mach_kernel) [0xffffff80002c6461]
Thread 0x4a4c3
User stack:
19 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
19 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
19 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
Thread 0x4a536
User stack:
19 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
19 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
19 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
Thread 0x4a505
User stack:
12 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
12 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
12 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
Thread 0x4a507
User stack:
12 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
12 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
12 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
Thread 0x4a537
User stack:
12 start_wqthread + 13 (in libsystem_c.dylib) [0x7fff8c5b3b85]
12 __workq_kernreturn + 10 (in libsystem_kernel.dylib) [0x7fff9518d192]
Kernel stack:
12 workqueue_mark_exiting + 1408 (in mach_kernel) [0xffffff80005a50b0]
Binary Images:
0x107eeb000 - 0x10863cfff com.apple.Aperture 3.4 (3.4) <F66E6C13-82C8-3C10-91D2-6A749047429F> /Applications/Aperture.app/Contents/MacOS/Aperture
0x1088e2000 - 0x108dfefff com.apple.RedRock 1.9.4 (301.35) <6425F20F-6955-3997-9AEC-4E7198FC6111> /Applications/Aperture.app/Contents/Frameworks/RedRock.framework/Versions/A/Red Rock
0x1093ea000 - 0x109665ff7 com.apple.prokit 7.2.3 (1823) <0D6BA804-8262-3942-B84D-B4886082242F> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0x10a0d2000 - 0x10a14cff7 com.apple.proxtcore 1.4.1 (250.56) <3EE2E877-CBED-3842-8927-00E0805AB8A7> /Applications/Aperture.app/Contents/Frameworks/ProXTCore.framework/Versions/A/P roXTCore
0x10a1b3000 - 0x10a2cdff7 com.apple.iLifeSQLAccess 1.7.1 (50.76) <9E4066EE-C678-31FA-946A-6EC615446067> /Applications/Aperture.app/Contents/Frameworks/iLifeSQLAccess.framework/Version s/A/iLifeSQLAccess
0x7fff8c562000 - 0x7fff8c63ffef libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
0x7fff8c990000 - 0x7fff8c9cffff com.apple.AE 527.7 (527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8d290000 - 0x7fff8d464ff7 com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff8fd34000 - 0x7fff906d2a27 com.apple.CoreGraphics 1.600.0 (???) <576777EA-921B-3D94-98C3-40A9CF8EBD18> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
0x7fff9154c000 - 0x7fff92152fff com.apple.AppKit 6.7.5 (1138.51) <44417D02-6123-3FC3-A119-CE51BB4C3006> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
0x7fff9258a000 - 0x7fff925ceff7 libRIP.A.dylib ??? (???) <B2A38D2C-7E82-34C5-8896-48C37B0E64A3> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
0x7fff92837000 - 0x7fff92b50fff com.apple.Foundation 6.7.2 (833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff93912000 - 0x7fff93920fff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff95176000 - 0x7fff95196fff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
0x7fff951f8000 - 0x7fff95524fff com.apple.HIToolbox 1.9 (???) <CCB32DEA-D0CA-35D1-8019-E599C8007AB6> /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
Process: aadvantage-helper [185]
Path: /Users/USER/Library/Application Support/AAdvantage eShopping assistant/*/aadvantage-helper.app/Contents/MacOS/aadvantage-helper
Architecture: x86_64
UID: 501
Process: AELWriter [613]
Path: /usr/sbin/AELWriter
Architecture: x86_64
UID: 0
Thread 0xef9e DispatchQueue 1
User stack:
19 ??? (in AELWriter) [0x1000010e4]
19 ??? (in AELWriter) [0x1000011b4]
19 -[NSRunLoop(NSRunLoop) run] + 62 (in Foundation) [0x7fff92842e67]
19 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff92842f7b]
19 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff8d2c8486]
19 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff8d2c8c74]
19 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff8d2c050c]
19 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
19 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0xef9f DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
19 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Binary Images:
0x100000000 - 0x100001fff AELWriter ??? (???) <D67CD5C5-FFFF-7F2B-92B9-3D1CEC441D45> /usr/sbin/AELWriter
0x7fff8d290000 - 0x7fff8d464ff7 com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff92837000 - 0x7fff92b50fff com.apple.Foundation 6.7.2 (833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff93912000 - 0x7fff93920fff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff95176000 - 0x7fff95196fff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
Process: AirPort Base Station Agent [177]
Path: /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
Architecture: x86_64
UID: 501
Thread 0x503 DispatchQueue 1
User stack:
19 ??? (in AirPort Base Station Agent) [0x10ef8e654]
19 ??? (in AirPort Base Station Agent) [0x10ef9f353]
19 CFRunLoopRun + 95 (in CoreFoundation) [0x7fff8d2d819f]
19 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff8d2c8486]
19 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff8d2c8c74]
19 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff8d2c050c]
19 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
19 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x50d DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
19 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Thread 0x518
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __select + 10 (in libsystem_kernel.dylib) [0x7fff9518cdf2]
Kernel stack:
19 wakeup + 992 (in mach_kernel) [0xffffff8000555e90]
Binary Images:
0x10ef8d000 - 0x10efa4fff com.apple.AirPortBaseStationAgent 1.5.5 (155.7) <0D37CC05-D1C6-3C6C-BACD-A88D4BD4C3CD> /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
0x7fff8c562000 - 0x7fff8c63ffef libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
0x7fff8d290000 - 0x7fff8d464ff7 com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff93912000 - 0x7fff93920fff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff95176000 - 0x7fff95196fff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
Process: aosnotifyd [54]
Path: /usr/sbin/aosnotifyd
Architecture: x86_64
UID: 0
Thread 0x18f DispatchQueue 1
User stack:
19 start + 52 (in aosnotifyd) [0x10940c0b4]
19 main + 74 (in aosnotifyd) [0x1094139ec]
19 -[AOSNotificationDaemon startup] + 1294 (in aosnotifyd) [0x1094137b3]
19 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff92842f7b]
19 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff8d2c8486]
19 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff8d2c8c74]
19 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff8d2c050c]
19 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
19 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x351 DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
19 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Thread 0x4f3
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __NSThread__main__ + 1575 (in Foundation) [0x7fff928916a2]
19 -[NSThread main] + 68 (in Foundation) [0x7fff9289172a]
19 +[NSURLConnection(NSURLConnectionReallyInternal) _resourceLoadLoop:] + 335 (in Foundation) [0x7fff9289cfd7]
19 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff8d2c8486]
19 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff8d2c8c74]
19 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff8d2c050c]
19 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
19 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x519
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __select + 10 (in libsystem_kernel.dylib) [0x7fff9518cdf2]
Kernel stack:
19 wakeup + 992 (in mach_kernel) [0xffffff8000555e90]
Binary Images:
0x10940a000 - 0x10944bfff aosnotifyd ??? (???) <5287944C-EDF3-3175-81A3-CC1BEF4E43F7> /usr/sbin/aosnotifyd
0x7fff8c562000 - 0x7fff8c63ffef libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
0x7fff8d290000 - 0x7fff8d464ff7 com.apple.CoreFoundation 6.7.2 (635.21) <62A3402E-A4E7-391F-AD20-1EF20236CE1B> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff92837000 - 0x7fff92b50fff com.apple.Foundation 6.7.2 (833.25) <22AAC369-B63C-3C55-8AC6-C3ECBA44DA7B> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff93912000 - 0x7fff93920fff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff95176000 - 0x7fff95196fff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
Process: AppleMobileDeviceHelper [401]
Path: /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper
Architecture: x86_64
UID: 501
Thread 0xb59b DispatchQueue 1
User stack:
19 ??? (in AppleMobileDeviceHelper) [0x100001678]
19 ??? (in AppleMobileDeviceHelper) [0x10000243d]
19 ??? (in AppleMobileDeviceHelper) [0x10000afb0]
19 __select + 10 (in libsystem_kernel.dylib) [0x7fff9518cdf2]
Kernel stack:
19 wakeup + 992 (in mach_kernel) [0xffffff8000555e90]
Thread 0xb59f DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
19 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Thread 0xb5ab
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __select + 10 (in libsystem_kernel.dylib) [0x7fff9518cdf2]
Kernel stack:
19 wakeup + 992 (in mach_kernel) [0xffffff8000555e90]
Binary Images:
0x100000000 - 0x100017ff7 com.apple.SyncServices.AppleMobileDeviceHelper 5.0 (889) <7B6B311D-2C94-3368-BA3F-48E449EF6A1C> /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/Current/Apple MobileDeviceHelper.app/Contents/MacOS/AppleMobileDeviceHelper
0x7fff8c562000 - 0x7fff8c63ffef libsystem_c.dylib ??? (???) <41B43515-2806-3FBC-ACF1-A16F35B7E290> /usr/lib/system/libsystem_c.dylib
0x7fff93912000 - 0x7fff93920fff libdispatch.dylib ??? (???) <8E03C652-922A-3399-93DE-9EA0CBFA0039> /usr/lib/system/libdispatch.dylib
0x7fff95176000 - 0x7fff95196fff libsystem_kernel.dylib ??? (???) <66C9F9BD-C7B3-30D4-B1A0-03C8A6392351> /usr/lib/system/libsystem_kernel.dylib
Process: applepushserviced [53]
Path: /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
Architecture: x86_64
UID: 0
Thread 0x18e DispatchQueue 1
User stack:
19 ??? (in applepushserviced) [0x10f57b8d4]
19 ??? (in applepushserviced) [0x10f57b9b8]
19 -[NSRunLoop(NSRunLoop) run] + 62 (in Foundation) [0x7fff92842e67]
19 -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 267 (in Foundation) [0x7fff92842f7b]
19 CFRunLoopRunSpecific + 230 (in CoreFoundation) [0x7fff8d2c8486]
19 __CFRunLoopRun + 1204 (in CoreFoundation) [0x7fff8d2c8c74]
19 __CFRunLoopServiceMachPort + 188 (in CoreFoundation) [0x7fff8d2c050c]
19 mach_msg_trap + 10 (in libsystem_kernel.dylib) [0x7fff9518b67a]
Kernel stack:
19 ipc_mqueue_receive_continue + 0 (in mach_kernel) [0xffffff8000215930]
Thread 0x1b0 DispatchQueue 2
User stack:
19 _dispatch_mgr_thread + 54 (in libdispatch.dylib) [0x7fff93914316]
19 kevent + 10 (in libsystem_kernel.dylib) [0x7fff9518d7e6]
Kernel stack:
19 kqueue_scan + 416 (in mach_kernel) [0xffffff800053b4d0]
Thread 0x4f4
User stack:
19 thread_start + 13 (in libsystem_c.dylib) [0x7fff8c5b3b75]
19 _pthread_start + 335 (in libsystem_c.dylib) [0x7fff8c5b08bf]
19 __select + 10 (in libsystem_kernel.dylib) [0x7fff9518cdf2]
Kernel stack: -
Aperture not responding after loading
The program will load- I get to the initial screen- but will not respond after I pick an operation. I tried "time machine" and restored from "backup". Neither one worked. I can access my pictures; I just cannot get the program to operate.
Aperture is showing up top, next to the "apple" but that is all. I then get the "beach ball". I have to force close to get it to stop.
The only thing I remember doing since I used it last was to empty the trash to free up some space.
Any suggestions?Try temporary rename/move aperature library to check is problem in the particular library or in aperture installation. If AP will start, then you will need to repair/rebuild library; otherwise you will need to re-install AP. Btw, as far as I remember Apple strongly recommend do not use Time Machine with AP.
-
Hello,
I have been having difficulties with Aperture for several months. It simply does not respond. I get this message
several times a day. If I wait long enough it will come back to normal, and other times I have to force quit and
start over. I am using an imac 27 inch with a 2.93 processor and 4GB of Ram . I am running on OS 10.6.8 and Aperture is version 3.2.1
I would appreciate any help, this is getting beyond irritating. I never had this amount of problems with iphoto.
Thank you for your help,
RickSurprised you have so much space given the fact that you have 20 Aperture libraries on the drive.
What are you doing in Aperture when the stalls happen? Does it happen in all libraries?
Given that the disk space looks ok then follow Erine's advice and have Activity Monitor running. Pay particular attention to the page out/swap used section. It's not so much the total numbers shown as the change in the numbers.
So boot you machine, open Activity Monitor, note the numbers for swap/page outs, should be zero after a boot.
Now run your system as you normally do, occasionally noting the numbers. If and when Aperture stalls take a look and see if there is a jump in either of the numbers.
regards -
Aperture not responding on startup
I imported some photos last night, but this morning when I get ready to work on them, I open up Aperture, and the spinning thing is all it does.
I can't do anything. I've restarted the app and my computer. Does that mean I am going to have to reinstall the program and lose all my photos? I have my originals saved, but not the fixed ones.
And what is the Aperture backup thing I saw mentioned?
Please help as soon as you can.Have you tried clearing the app preferences?
To clear the app preference,
CS6: Hold Cmd+Alt+Shift (Mac)/Ctrl+Alt+Shift (Win) and launch AME.
CS7: Hold Shift and launch AME.
If this doesn't work, you may also want to try clearing the media cache.
To clear the media cache,
From Media Encoder menu, open the Preferences dialog. (Edit menu > Preferences for Windows). Then, under the "Media" pane, click "Clean". -
Aperture library on external drive - Aperture not responding
as my laptop filled up - I created an external Aperture library on an external drive - with a matching drive used as a vault - worked fine - then I was deleting images from the laptop library that were also in the library on the external drive and when I re-connected the external library drive Aperture would be unable to start, had to force quit - I can not open the library on the external drive in Aperture - I can open the library on the laptop - but I need the images in the external drive - the vault was updated 6 days ago -
I am in the process of restoring the library from the vault - my question -
can anything be done to open the current library on the external drive? - any kind of work around?Well, yes and no. When my laptop drive got full, I copied the laptop library to the external 500gb drive and gave it a different name. Then I proceeded to use it as the primary library as I shot 3 weddings. So, yes, I have 2 separate libraries, the one on my laptop and the one on my external drive(s), both have masters (no referenced files), the external drive has everything that the laptop has - the external drive has probably 100 gigs more than the laptop (the laptop has about 85 gigs of files) - I also have a second matching 500gb external drive that backs up the first external drive which is where the vault for the first 500gb drive is located.
I just restored the library from the vault (from December 1) to create yet another new library on another totally spare drive just to see if it would work - that was successful now it is recovering the 41 projects
that were in the vault - it looks to be running pretty smoothly - although the process has so far taken several hours. Recall, however, that this vault backup is 6 days old. The most current library still will not load. This new restored library opens fine. So, there is something corrupted (a bad image perhaps?) in the most current 500gb library that is hanging Aperture.
I still have the original cards that I shot in the past 6 days (about 20 gigs) which were not in the vault, but I did a lot of work with those files and would like to recover the projects from the library
that can't currently open. I have a desktop at my studio and I am thinking I will try opening the problem library (on the 500gb external) there and see what happens.
This whole thing started when I figured I could clear some files from the laptop that were both on the laptop and the external drive. I have done this before to create more working space on my laptop.
Have I clearly answered your questions? - thank you for your P.S. - I didn't know I could get the .approject files out - I may try that - -
Assembing Book failure, Aperture not responding
I've made a book, my first, and want to send it to Apple for purchase. It's 44 pages, softcover of edited RAW files. I've attempted to send it multiple times (5 or 6) and the program gets stuck while "Assembing Book, this may take several minutes" message is up. I've tried this before going to bed and let the computer run all night, but it still fails. After a few hours, I must "force quit" to end the misery.
I've deleted my .plist file which was suggested here, but that made no difference. I've rebuilt my library without a difference. Now I'm stumped and need help. Any ideas.
I'm using Aperture 2.1.2
Thanks,
GordonI've made a book, my first, and want to send it to Apple for purchase. It's 44 pages, softcover of edited RAW files. I've attempted to send it multiple times (5 or 6) and the program gets stuck while "Assembing Book, this may take several minutes" message is up. I've tried this before going to bed and let the computer run all night, but it still fails. After a few hours, I must "force quit" to end the misery.
I've deleted my .plist file which was suggested here, but that made no difference. I've rebuilt my library without a difference. Now I'm stumped and need help. Any ideas.
I'm using Aperture 2.1.2
Thanks,
Gordon -
I have consolidated iPhoto into aperture 3.2.2 and now have both aperture and iPhoto put consolidated library on 2.0 USB external drive. Have been removing duplicate photos from 23,000 down to 15,000. Problem in trying to close aperture and now tried to move library from 2.0 USB to 800FW and can see projects but no thumbnails. Aperture error now reads not responding. Can I repair library on 2.0 at this point?
Sharon,
did you do anything else besides copying your library to a fire wire drive after your last post Aperture not responding ?
Since that library probalbly already needed fixing, I'd recommend to force quit Aperture and use the "First Aid" to repair your Library.
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
Regards
Léonie -
All of a sudden my tool (ie stamp tool, cropping tool,etc) are not responding.
Help!I should have specified that I had aperture, not aperture 2, so sadly the "p" key did not work
-
Aperture 2 keeps reporting that it is not responding. This usually happens after it has been running for a while and I am making adjustments other than the most basic. The CPU is maxing out and fans start to run full blast and the spinning ball last as much as 20 seconds.
If say I grab the monochrome red slider and slide backwards and forwards it will move smoothly and the screen will update quickly and all is well. However things go wrong if I move the slider slightly, let go and then move again and maybe once more, the whole not responding, fans and spinning ball start off.
I have generate previews turned off. I cannot believe a 15" Intel MBP 2.16, 3G RAM is not good enough to run this. There must be a problem with Aperture. All other programs run perfectly, Lightroom, CS3 etc. Any ideas please.
http://idisk.mac.com/ianrmatthews-Public?view=webYes this is happening to me on both my Mac's. I'm running an MBP C2D and an iMac 2.16 GHz...It's depressing because I love Aperture's workflow; but I don't love the terrible system slow-downs. Yesterday I got the spinning beachball and full fans for 30 minutes (I left my MBP on my desk and went out on a quick errand, hoping that it would have finished whatever it was doing). The system locked up completely after I got back (I think it's bitter-sweet that in two years, the only application that has ever caused my apple computer to completely lock-up...is an apple software product). I
'd hoped that with 2.0 they would have improved the performance problems, but it looks like Aperture is still an overly resource-intensive dog. Until the developpers can reign in the performance issues and "truly" bring this bad boy up to speed, I'm going to have to stick to Lightroom—which ***** because Adobe's outrageous prices p!$$ me off -
AMD A6-5400k - CPU1: Not Responding
Hi fellas,
I got a new CPU for my maschine, which runs on ARCH-x86_64 Kernel 3.6.10. So far everything went fine but one thing:
At boot, only of the two cores is recognized. This is only the case in Arch, both BIOS and Windows show both Cores. I rebuilt my initramfs and reinstalled linux, but none helped.
I realize, there are several topics around the www and this board, but none of them helped me in my case.
I tried some things, like booting the LTS-Kernel.
Any ideas how I can solve this issue?
I got the outputs of dmesg (system boot):
I think the relevant Lines are around 0.17000.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.46-1-lts (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP Fri Oct 12 23:52:43 CEST 2012
[ 0.000000] Command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009d575000 (usable)
[ 0.000000] BIOS-e820: 000000009d575000 - 000000009d856000 (reserved)
[ 0.000000] BIOS-e820: 000000009d856000 - 000000009dbae000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009dbae000 - 000000009e9d3000 (reserved)
[ 0.000000] BIOS-e820: 000000009e9d3000 - 000000009e9d4000 (usable)
[ 0.000000] BIOS-e820: 000000009e9d4000 - 000000009ebda000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009ebda000 - 000000009f04c000 (usable)
[ 0.000000] BIOS-e820: 000000009f04c000 - 000000009f7dd000 (reserved)
[ 0.000000] BIOS-e820: 000000009f7dd000 - 000000009f800000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed40000 - 00000000fed45000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100001000 - 000000043f000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./F2A85X-D3H, BIOS F1 10/09/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x43f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-D1FFF write-protect
[ 0.000000] D2000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000043f000000 aka 17392M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 000000009f800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-000000009f800000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 009f800000 page 2M
[ 0.000000] kernel direct mapping tables up to 9f800000 @ 1fffe000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000043f000000
[ 0.000000] 0100000000 - 0400000000 page 1G
[ 0.000000] 0400000000 - 043f000000 page 2M
[ 0.000000] kernel direct mapping tables up to 43f000000 @ 9f7fe000-9f800000
[ 0.000000] RAMDISK: 79bca000 - 7ffff000
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 000000009db97080 0007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 000000009db9cf90 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 000000009db97190 05DFE (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000009dba6d80 00040
[ 0.000000] ACPI: APIC 000000009db9d088 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 000000009db9d100 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 000000009db9d148 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 000000009db9d188 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IFEU 000000009db9d1c0 00042 (v01 ALASKA A M I 01072009 00000000)
[ 0.000000] ACPI: BGRT 000000009db9d208 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 000000009db9d240 006B2 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 000000009db9d8f8 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: IVRS 000000009db9ddb0 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)
[ 0.000000] ACPI: CRAT 000000009db9de20 001F8 (v01 AMD AGESA 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000043f000000
[ 0.000000] Initmem setup node 0 0000000000000000-000000043f000000
[ 0.000000] NODE_DATA [000000043effb000 - 000000043effffff]
[ 0.000000] [ffffea0000000000-ffffea000edfffff] PMD -> [ffff88042ee00000-ffff88043c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0043f000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0009d575
[ 0.000000] 0: 0x0009e9d3 -> 0x0009e9d4
[ 0.000000] 0: 0x0009ebda -> 0x0009f04c
[ 0.000000] 0: 0x0009f7dd -> 0x0009f800
[ 0.000000] 0: 0x00100001 -> 0x0043f000
[ 0.000000] On node 0 totalpages: 4049304
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 627267 pages, LIFO batch:31
[ 0.000000] Normal zone: 46536 pages used for memmap
[ 0.000000] Normal zone: 3357239 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000009d575000 - 000000009d856000
[ 0.000000] PM: Registered nosave memory: 000000009d856000 - 000000009dbae000
[ 0.000000] PM: Registered nosave memory: 000000009dbae000 - 000000009e9d3000
[ 0.000000] PM: Registered nosave memory: 000000009e9d4000 - 000000009ebda000
[ 0.000000] PM: Registered nosave memory: 000000009f04c000 - 000000009f7dd000
[ 0.000000] PM: Registered nosave memory: 000000009f800000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000
[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000
[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000
[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
[ 0.000000] Allocating PCI resources starting at 9f800000 (gap: 9f800000:5f400000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88043ec00000 s79360 r8192 d23040 u524288
[ 0.000000] pcpu-alloc: s79360 r8192 d23040 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3988427
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: gpt loglevel=7 rootdelay=10 initrd=/boot/initramfs_x86_64.img BOOT_IMAGE=/boot/vmlinuz_x86_64_lts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 15793100k/17809408k available (4239k kernel code, 1612192k absent, 404116k reserved, 5184k data, 732k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 130023424 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 3593.482 MHz processor.
[ 0.030003] Calibrating delay loop (skipped), value calculated using timer frequency.. 7186.96 BogoMIPS (lpj=35934820)
[ 0.030067] pid_max: default: 32768 minimum: 301
[ 0.030186] Security Framework initialized
[ 0.030219] AppArmor: AppArmor disabled by boot time parameter
[ 0.031478] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.038170] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.042321] Mount-cache hash table entries: 256
[ 0.042958] Initializing cgroup subsys cpuacct
[ 0.043012] Initializing cgroup subsys memory
[ 0.043055] Initializing cgroup subsys devices
[ 0.043086] Initializing cgroup subsys freezer
[ 0.043118] Initializing cgroup subsys net_cls
[ 0.043149] Initializing cgroup subsys blkio
[ 0.043215] tseg: 009f800000
[ 0.043216] CPU: Physical Processor ID: 0
[ 0.043248] CPU: Processor Core ID: 0
[ 0.043279] mce: CPU supports 7 MCE banks
[ 0.044338] ACPI: Core revision 20110413
[ 0.050017] ftrace: allocating 16878 entries in 67 pages
[ 0.060590] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.160953] CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics stepping 01
[ 0.170000] Performance Events: AMD Family 15h PMU driver.
[ 0.170000] ... version: 0
[ 0.170000] ... bit width: 48
[ 0.170000] ... generic registers: 6
[ 0.170000] ... value mask: 0000ffffffffffff
[ 0.170000] ... max period: 00007fffffffffff
[ 0.170000] ... fixed-purpose events: 0
[ 0.170000] ... event mask: 000000000000003f
[ 0.170000] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.170000] Booting Node 0, Processors #1
[ 0.170000] smpboot cpu 1: start_ip = 99000
[ 7.443437] CPU1: Not responding.
[ 7.445038] Brought up 1 CPUs
[ 7.445164] Total of 1 processors activated (7186.96 BogoMIPS).
[ 7.449107] devtmpfs: initialized
[ 7.482442] PM: Registering ACPI NVS region at 9d856000 (3506176 bytes)
[ 7.486598] PM: Registering ACPI NVS region at 9e9d4000 (2121728 bytes)
[ 7.493031] NET: Registered protocol family 16
[ 7.496249] Extended Config Space enabled on 0 nodes
[ 7.496483] ACPI: bus type pci registered
[ 7.498432] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 7.498554] PCI: not using MMCONFIG
[ 7.498978] PCI: Using configuration type 1 for base access
[ 7.499066] PCI: Using configuration type 1 for extended access
[ 7.527324] bio: create slab <bio-0> at 0
[ 7.601576] ACPI: EC: Look up EC in DSDT
[ 7.685139] ACPI: Executed 1 blocks of module-level executable AML code
[ 7.830050] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 7.845972] ACPI: Interpreter enabled
[ 7.846060] ACPI: (supports S0 S3 S4 S5)
[ 7.847202] ACPI: Using IOAPIC for interrupt routing
[ 7.850557] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 7.851641] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 10.009318] ACPI: No dock devices found.
[ 10.009448] HEST: Table not found.
[ 10.009563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 10.018400] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 10.028017] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af]
[ 10.028139] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7]
[ 10.028263] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03df]
[ 10.028386] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 10.028508] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 10.028639] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 10.029075] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xffffffff]
[ 10.029299] pci 0000:00:00.0: [1022:1410] type 0 class 0x000600
[ 10.030321] pci 0000:00:00.2: [1022:1419] type 0 class 0x000806
[ 10.032320] pci 0000:00:01.0: [1002:9991] type 0 class 0x000300
[ 10.032465] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 10.032576] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 10.032990] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 10.034009] pci 0000:00:01.0: supports D1 D2
[ 10.034262] pci 0000:00:01.1: [1002:9902] type 0 class 0x000403
[ 10.034406] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 10.035595] pci 0000:00:01.1: supports D1 D2
[ 10.036209] pci 0000:00:02.0: [1022:1412] type 1 class 0x000604
[ 10.037405] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 10.037463] pci 0000:00:02.0: PME# disabled
[ 10.038065] pci 0000:00:04.0: [1022:1414] type 1 class 0x000604
[ 10.039258] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 10.039316] pci 0000:00:04.0: PME# disabled
[ 10.040227] pci 0000:00:10.0: [1022:7812] type 0 class 0x000c03
[ 10.040423] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 10.041630] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 10.041993] pci 0000:00:10.0: PME# disabled
[ 10.042315] pci 0000:00:10.1: [1022:7812] type 0 class 0x000c03
[ 10.042510] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 10.044002] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 10.044059] pci 0000:00:10.1: PME# disabled
[ 10.044424] pci 0000:00:11.0: [1022:7801] type 0 class 0x000106
[ 10.044632] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 10.045026] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 10.045141] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 10.045255] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 10.045372] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 10.045486] pci 0000:00:11.0: reg 24: [mem 0xfeb51000-0xfeb517ff]
[ 10.046377] pci 0000:00:12.0: [1022:7807] type 0 class 0x000c03
[ 10.046528] pci 0000:00:12.0: reg 10: [mem 0xfeb50000-0xfeb50fff]
[ 10.047596] pci 0000:00:12.2: [1022:7808] type 0 class 0x000c03
[ 10.048081] pci 0000:00:12.2: reg 10: [mem 0xfeb4f000-0xfeb4f0ff]
[ 10.049232] pci 0000:00:12.2: supports D1 D2
[ 10.049268] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 10.049324] pci 0000:00:12.2: PME# disabled
[ 10.049558] pci 0000:00:13.0: [1022:7807] type 0 class 0x000c03
[ 10.050126] pci 0000:00:13.0: reg 10: [mem 0xfeb4e000-0xfeb4efff]
[ 10.051154] pci 0000:00:13.2: [1022:7808] type 0 class 0x000c03
[ 10.051363] pci 0000:00:13.2: reg 10: [mem 0xfeb4d000-0xfeb4d0ff]
[ 10.052509] pci 0000:00:13.2: supports D1 D2
[ 10.052545] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 10.052603] pci 0000:00:13.2: PME# disabled
[ 10.053123] pci 0000:00:14.0: [1022:780b] type 0 class 0x000c05
[ 10.054237] pci 0000:00:14.2: [1022:780d] type 0 class 0x000403
[ 10.054467] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 10.055437] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 10.055495] pci 0000:00:14.2: PME# disabled
[ 10.055640] pci 0000:00:14.3: [1022:780e] type 0 class 0x000601
[ 10.056993] pci 0000:00:14.4: [1022:780f] type 1 class 0x000604
[ 10.057448] pci 0000:00:14.5: [1022:7809] type 0 class 0x000c03
[ 10.057598] pci 0000:00:14.5: reg 10: [mem 0xfeb4c000-0xfeb4cfff]
[ 10.058964] pci 0000:00:18.0: [1022:1400] type 0 class 0x000600
[ 10.059537] pci 0000:00:18.1: [1022:1401] type 0 class 0x000600
[ 10.060476] pci 0000:00:18.2: [1022:1402] type 0 class 0x000600
[ 10.061308] pci 0000:00:18.3: [1022:1403] type 0 class 0x000600
[ 10.062308] pci 0000:00:18.4: [1022:1404] type 0 class 0x000600
[ 10.063128] pci 0000:00:18.5: [1022:1405] type 0 class 0x000600
[ 10.064976] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
[ 10.065120] pci 0000:01:00.0: reg 10: [mem 0xfeac0000-0xfeadffff]
[ 10.065243] pci 0000:01:00.0: reg 14: [mem 0xfea00000-0xfea7ffff]
[ 10.065364] pci 0000:01:00.0: reg 18: [io 0xe000-0xe01f]
[ 10.065487] pci 0000:01:00.0: reg 1c: [mem 0xfeae0000-0xfeae3fff]
[ 10.066064] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeabffff pref]
[ 10.066618] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 10.066975] pci 0000:01:00.0: PME# disabled
[ 10.067368] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 10.067531] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 10.067587] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 10.067969] pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 10.068963] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 10.069068] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]
[ 10.069308] pci 0000:02:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 10.069469] pci 0000:02:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 10.070508] pci 0000:02:00.0: supports D1 D2
[ 10.070544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 10.070602] pci 0000:02:00.0: PME# disabled
[ 10.071304] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 10.071465] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 10.071522] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 10.071601] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.072247] pci 0000:03:06.0: [1095:3114] type 0 class 0x000104
[ 10.072438] pci 0000:03:06.0: reg 10: [io 0xc040-0xc047]
[ 10.072558] pci 0000:03:06.0: reg 14: [io 0xc030-0xc033]
[ 10.072989] pci 0000:03:06.0: reg 18: [io 0xc020-0xc027]
[ 10.073069] pci 0000:03:06.0: reg 1c: [io 0xc010-0xc013]
[ 10.073186] pci 0000:03:06.0: reg 20: [io 0xc000-0xc00f]
[ 10.073303] pci 0000:03:06.0: reg 24: [mem 0xfe980000-0xfe9803ff]
[ 10.073420] pci 0000:03:06.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
[ 10.074010] pci 0000:03:06.0: supports D1 D2
[ 10.074426] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 10.074564] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 10.074621] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 10.074981] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 10.074993] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 10.075032] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 10.075071] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 10.075108] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 10.075146] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 10.075183] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 10.075220] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
[ 10.075413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 10.087428] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 10.092229] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 10.093609] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 10.098972] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 10.105356] pci0000:00: ACPI _OSC control (0x1d) granted
[ 10.469632] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 10.473051] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 10.476159] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 10.479249] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 10.482314] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 10.485047] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 10.487433] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 10.490344] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 10.494044] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 10.494442] vgaarb: loaded
[ 10.494556] vgaarb: bridge control possible 0000:00:01.0
[ 10.496198] PCI: Using ACPI for IRQ routing
[ 10.574000] PCI: pci_cache_line_size set to 64 bytes
[ 10.575540] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 10.575579] reserve RAM buffer: 000000009d575000 - 000000009fffffff
[ 10.575976] reserve RAM buffer: 000000009e9d4000 - 000000009fffffff
[ 10.576002] reserve RAM buffer: 000000009f04c000 - 000000009fffffff
[ 10.576049] reserve RAM buffer: 000000009f800000 - 000000009fffffff
[ 10.576088] reserve RAM buffer: 000000043f000000 - 000000043fffffff
[ 10.579048] NetLabel: Initializing
[ 10.579161] NetLabel: domain hash size = 128
[ 10.579273] NetLabel: protocols = UNLABELED CIPSOv4
[ 10.580048] NetLabel: unlabeled traffic allowed by default
[ 10.580185] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 10.580995] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 10.583427] Switching to clocksource hpet
[ 10.586451] Switched to NOHz mode on CPU #0
[ 10.846011] pnp: PnP ACPI init
[ 10.846721] ACPI: bus type pnp registered
[ 10.851432] pnp 00:00: [bus 00-ff]
[ 10.851473] pnp 00:00: [io 0x0cf8-0x0cff]
[ 10.851513] pnp 00:00: [io 0x0000-0x03af window]
[ 10.851555] pnp 00:00: [io 0x03e0-0x0cf7 window]
[ 10.851596] pnp 00:00: [io 0x03b0-0x03df window]
[ 10.851637] pnp 00:00: [io 0x0d00-0xffff window]
[ 10.851678] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 10.851718] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 10.851759] pnp 00:00: [mem 0xc0000000-0xffffffff window]
[ 10.851799] pnp 00:00: [mem 0x00000000 window]
[ 10.853412] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 10.854370] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 10.855576] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 10.855722] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 10.880640] pnp 00:02: [io 0x0010-0x001f]
[ 10.880679] pnp 00:02: [io 0x0022-0x003f]
[ 10.880718] pnp 00:02: [io 0x0063]
[ 10.880756] pnp 00:02: [io 0x0065]
[ 10.880795] pnp 00:02: [io 0x0067-0x006f]
[ 10.880834] pnp 00:02: [io 0x0072-0x007f]
[ 10.880873] pnp 00:02: [io 0x0080]
[ 10.880912] pnp 00:02: [io 0x0084-0x0086]
[ 10.880975] pnp 00:02: [io 0x0088]
[ 10.881014] pnp 00:02: [io 0x008c-0x008e]
[ 10.881052] pnp 00:02: [io 0x0090-0x009f]
[ 10.881387] pnp 00:02: [io 0x00a2-0x00bf]
[ 10.881422] pnp 00:02: [io 0x00b1]
[ 10.881458] pnp 00:02: [io 0x00e0-0x00ef]
[ 10.881494] pnp 00:02: [io 0x04d0-0x04d1]
[ 10.881529] pnp 00:02: [io 0x040b]
[ 10.881565] pnp 00:02: [io 0x04d6]
[ 10.881601] pnp 00:02: [io 0x0c00-0x0c01]
[ 10.881636] pnp 00:02: [io 0x0c14]
[ 10.881672] pnp 00:02: [io 0x0c50-0x0c51]
[ 10.881708] pnp 00:02: [io 0x0c52]
[ 10.881743] pnp 00:02: [io 0x0c6c]
[ 10.881779] pnp 00:02: [io 0x0c6f]
[ 10.881815] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 10.881851] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 10.881886] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 10.881924] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 10.881959] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 10.881997] pnp 00:02: [io 0x0800-0x089f]
[ 10.882033] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 10.882376] pnp 00:02: [io 0x0000-0x000f]
[ 10.882401] pnp 00:02: [io 0x0b20-0x0b3f]
[ 10.882438] pnp 00:02: [io 0x0900-0x090f]
[ 10.882474] pnp 00:02: [io 0x0910-0x091f]
[ 10.882512] pnp 00:02: [io 0xfe00-0xfefe]
[ 10.882547] pnp 00:02: [io 0x0060-0x005f disabled]
[ 10.882583] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 10.882619] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 10.882656] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 10.882692] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 10.882728] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 10.882763] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 10.882801] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 10.882836] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 10.884490] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 10.884616] system 00:02: [io 0x040b] has been reserved
[ 10.884742] system 00:02: [io 0x04d6] has been reserved
[ 10.884866] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 10.884988] system 00:02: [io 0x0c14] has been reserved
[ 10.885440] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 10.885563] system 00:02: [io 0x0c52] has been reserved
[ 10.885685] system 00:02: [io 0x0c6c] has been reserved
[ 10.885807] system 00:02: [io 0x0c6f] has been reserved
[ 10.885929] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 10.886375] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 10.886496] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 10.886619] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 10.886741] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 10.886863] system 00:02: [io 0x0800-0x089f] has been reserved
[ 10.886986] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 10.887433] system 00:02: [io 0x0900-0x090f] has been reserved
[ 10.887557] system 00:02: [io 0x0910-0x091f] has been reserved
[ 10.887679] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 10.887806] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 10.887928] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 10.888360] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 10.888468] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 10.888593] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 10.888715] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 10.888840] system 00:02: [mem 0xff000000-0xffffffff] has been reserved
[ 10.888981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.892417] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled]
[ 10.892456] pnp 00:03: [io 0x0220-0x0227]
[ 10.892494] pnp 00:03: [io 0x0228-0x0237]
[ 10.892534] pnp 00:03: [io 0x0a20-0x0a2f]
[ 10.893890] system 00:03: [io 0x0220-0x0227] has been reserved
[ 10.894018] system 00:03: [io 0x0228-0x0237] has been reserved
[ 10.894460] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 10.894605] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.901525] pnp 00:04: [dma 4]
[ 10.901565] pnp 00:04: [io 0x0000-0x000f]
[ 10.901629] pnp 00:04: [io 0x0081-0x0083]
[ 10.901667] pnp 00:04: [io 0x0087]
[ 10.901706] pnp 00:04: [io 0x0089-0x008b]
[ 10.901745] pnp 00:04: [io 0x008f]
[ 10.901784] pnp 00:04: [io 0x00c0-0x00df]
[ 10.902753] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 10.903004] pnp 00:05: [io 0x0070-0x0071]
[ 10.903394] pnp 00:05: [irq 8]
[ 10.904399] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 10.904582] pnp 00:06: [io 0x0061]
[ 10.905587] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 10.906373] pnp 00:07: [io 0x0010-0x001f]
[ 10.906408] pnp 00:07: [io 0x0022-0x003f]
[ 10.906444] pnp 00:07: [io 0x0044-0x005f]
[ 10.906481] pnp 00:07: [io 0x0072-0x007f]
[ 10.906517] pnp 00:07: [io 0x0080]
[ 10.906555] pnp 00:07: [io 0x0084-0x0086]
[ 10.906592] pnp 00:07: [io 0x0088]
[ 10.906627] pnp 00:07: [io 0x008c-0x008e]
[ 10.906663] pnp 00:07: [io 0x0090-0x009f]
[ 10.906699] pnp 00:07: [io 0x00a2-0x00bf]
[ 10.906735] pnp 00:07: [io 0x00e0-0x00ef]
[ 10.906771] pnp 00:07: [io 0x04d0-0x04d1]
[ 10.908470] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 10.908615] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.908803] pnp 00:08: [io 0x00f0-0x00ff]
[ 10.908895] pnp 00:08: [irq 13]
[ 10.910515] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 10.912466] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.916697] pnp 00:0a: [mem 0xa0000000-0xbfffffff]
[ 10.918472] system 00:0a: [mem 0xa0000000-0xbfffffff] has been reserved
[ 10.918619] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.920584] pnp 00:0b: [mem 0xfeb80000-0xfebfffff]
[ 10.922399] system 00:0b: [mem 0xfeb80000-0xfebfffff] has been reserved
[ 10.922543] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 10.927499] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 10.928848] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 10.928958] pnp: PnP ACPI: found 13 devices
[ 10.929375] ACPI: ACPI bus type pnp unregistered
[ 10.990732] PCI: max bus depth: 1 pci_try_num: 2
[ 10.990936] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 10.991384] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 10.991521] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 10.991658] pci 0000:00:02.0: bridge window [mem pref disabled]
[ 10.991821] pci 0000:00:04.0: PCI bridge to [bus 02-02]
[ 10.991949] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 10.992386] pci 0000:00:04.0: bridge window [mem disabled]
[ 10.992514] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.992683] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 10.992810] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 10.992960] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfe9fffff]
[ 10.993389] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 10.993675] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.993815] pci 0000:00:02.0: setting latency timer to 64
[ 10.993994] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.994461] pci 0000:00:04.0: setting latency timer to 64
[ 10.994566] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 10.994605] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 10.994644] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 10.994682] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 10.994721] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 10.994760] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 10.994799] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff]
[ 10.994837] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 10.994876] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 10.994915] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 10.994954] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 10.994993] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 10.995032] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 10.995368] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]
[ 10.995377] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]
[ 10.995414] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]
[ 10.995449] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]
[ 10.995485] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]
[ 10.995523] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]
[ 10.995559] pci_bus 0000:03: resource 10 [mem 0xc0000000-0xffffffff]
[ 10.996013] NET: Registered protocol family 2
[ 11.011431] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 11.044698] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 11.051435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 11.051803] TCP: Hash tables configured (established 524288 bind 65536)
[ 11.051921] TCP reno registered
[ 11.052935] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 11.054372] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 11.056540] NET: Registered protocol family 1
[ 11.056817] pci 0000:00:01.0: Boot video device
[ 11.057014] pci 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.057627] pci 0000:00:10.0: PCI INT A disabled
[ 11.057906] pci 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.058488] pci 0000:00:10.1: PCI INT B disabled
[ 11.058705] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.150025] pci 0000:00:12.0: PCI INT A disabled
[ 11.150071] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.150124] pci 0000:00:12.2: PCI INT B disabled
[ 11.150160] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.240018] pci 0000:00:13.0: PCI INT A disabled
[ 11.240057] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.240102] pci 0000:00:13.2: PCI INT B disabled
[ 11.240147] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.330018] pci 0000:00:14.5: PCI INT C disabled
[ 11.330066] PCI: CLS 64 bytes, default 64
[ 11.330109] Unpacking initramfs...
[ 0.040000] Kernel panic - not syncing: smp_callin: CPU1 started up but did not get a callout!
[ 0.040000]
[ 0.040000] Pid: 0, comm: kworker/0:0 Not tainted 3.0.46-1-lts #1
[ 0.040000] Call Trace:
[ 0.040000] [<ffffffff8140f6cd>] panic+0x91/0x197
[ 0.040000] [<ffffffff8140884c>] start_secondary+0xcb/0x1fe
[ 26.201608] Freeing initrd memory: 102612k freed
[ 26.228111] pci 0000:00:00.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.228318] pci 0000:00:00.2: irq 40 for MSI/MSI-X
[ 26.228396] AMD-Vi: Enabling IOMMU at 0000:00:00.2 cap 0x40 extended features: PreF PPR GT IA
[ 26.240635] AMD-Vi: Lazy IO/TLB flushing enabled
[ 26.240671] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 26.240706] Placing 64MB software IO TLB between ffff880099575000 - ffff88009d575000
[ 26.240743] software IO TLB at phys 0x99575000 - 0x9d575000
[ 26.241067] audit: initializing netlink socket (disabled)
[ 26.241110] type=2000 audit(1356177972.230:1): initialized
[ 26.250693] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 26.254005] VFS: Disk quotas dquot_6.5.2
[ 26.254149] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 26.254346] msgmni has been set to 31046
[ 26.254555] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 26.254612] io scheduler noop registered
[ 26.254646] io scheduler deadline registered (default)
[ 26.254719] io scheduler cfq registered
[ 26.254848] pcieport 0000:00:02.0: setting latency timer to 64
[ 26.254910] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X
[ 26.254987] pcieport 0000:00:04.0: setting latency timer to 64
[ 26.255045] pcieport 0000:00:04.0: irq 42 for MSI/MSI-X
[ 26.255142] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 26.255177] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 26.255212] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
[ 26.255257] pcieport 0000:00:04.0: Signaling PME through PCIe PME interrupt
[ 26.255291] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 26.255327] pcie_pme 0000:00:04.0:pcie01: service driver pcie_pme loaded
[ 26.255434] ERST: Table is not found!
[ 26.255511] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 26.255875] Linux agpgart interface v0.103
[ 26.255970] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 26.256358] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 26.256395] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 26.256512] mousedev: PS/2 mouse device common for all mice
[ 26.256588] rtc_cmos 00:05: RTC can wake from S4
[ 26.256715] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 26.256781] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 26.256827] cpuidle: using governor ladder
[ 26.256868] cpuidle: using governor menu
[ 26.257182] TCP cubic registered
[ 26.257413] NET: Registered protocol family 10
[ 26.258198] NET: Registered protocol family 17
[ 26.258233] Registering the dns_resolver key type
[ 26.258395] PM: Hibernation image not present or could not be loaded.
[ 26.258450] registered taskstats version 1
[ 26.259761] rtc_cmos 00:05: setting system clock to 2012-12-22 12:06:13 UTC (1356177973)
[ 26.261125] Initializing network drop monitor service
[ 26.263013] Freeing unused kernel memory: 732k freed
[ 26.263239] Write protecting the kernel read-only data: 8192k
[ 26.272919] Freeing unused kernel memory: 1888k freed
[ 26.277038] Freeing unused kernel memory: 696k freed
[ 26.303407] systemd-udevd[37]: starting version 194
[ 27.541378] Refined TSC clocksource calibration: 3593.465 MHz.
[ 27.541426] Switching to clocksource tsc
[ 30.186206] HDA Intel 0000:00:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 30.186313] HDA Intel 0000:00:01.1: irq 43 for MSI/MSI-X
[ 30.186378] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 30.191054] usbcore: registered new interface driver usbfs
[ 30.191133] usbcore: registered new interface driver hub
[ 30.197110] SCSI subsystem initialized
[ 30.216692] usbcore: registered new device driver usb
[ 30.220148] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 30.232290] input: PC Speaker as /devices/platform/pcspkr/input/input0
[ 30.234124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 30.239267] libata version 3.00 loaded.
[ 30.244294] ACPI: acpi_idle registered with cpuidle
[ 30.246226] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 30.246282] ACPI: Power Button [PWRB]
[ 30.246380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 30.246418] ACPI: Power Button [PWRF]
[ 30.249692] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2
[ 30.249737] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 30.249802] e1000e 0000:01:00.0: Disabling ASPM L0s L1
[ 30.249846] e1000e 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 30.249902] e1000e 0000:01:00.0: setting latency timer to 64
[ 30.250227] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
[ 30.250263] e1000e 0000:01:00.0: irq 45 for MSI/MSI-X
[ 30.250307] e1000e 0000:01:00.0: irq 46 for MSI/MSI-X
[ 30.252812] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 30.252873] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 30.252954] r8169 0000:02:00.0: setting latency timer to 64
[ 30.253001] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 30.253103] r8169 0000:02:00.0: irq 47 for MSI/MSI-X
[ 30.253760] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000187e000, 94:de:80:06:0b:c2, XID 0c900800 IRQ 47
[ 30.253799] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 30.255615] sata_sil 0000:03:06.0: version 2.4
[ 30.255694] sata_sil 0000:03:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 30.255763] sata_sil 0000:03:06.0: Applying R_ERR on DMA activate FIS errata fix
[ 30.259490] scsi0 : sata_sil
[ 30.262529] scsi1 : sata_sil
[ 30.265318] scsi2 : sata_sil
[ 30.268147] scsi3 : sata_sil
[ 30.268259] ata1: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980080 irq 20
[ 30.268301] ata2: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9800c0 irq 20
[ 30.268350] ata3: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe980280 irq 20
[ 30.268389] ata4: SATA max UDMA/100 mmio m1024@0xfe980000 tf 0xfe9802c0 irq 20
[ 30.375388] e1000e 0000:01:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 68:05:ca:0c:a8:da
[ 30.375437] e1000e 0000:01:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 30.375481] e1000e 0000:01:00.0: eth1: MAC: 3, PHY: 8, PBA No: E46981-007
[ 30.620035] ata1: SATA link down (SStatus 0 SControl 310)
[ 30.970035] ata2: SATA link down (SStatus 0 SControl 310)
[ 31.320029] ata3: SATA link down (SStatus 0 SControl 310)
[ 31.670023] ata4: SATA link down (SStatus 0 SControl 310)
[ 31.674284] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 31.674524] HDMI: no space for converter 10
[ 31.674615] HDMI: no space for converter 12
[ 31.674967] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input3
[ 31.675144] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 31.776299] xhci_hcd 0000:00:10.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.776372] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 31.776418] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 31.776483] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 31.776563] QUIRK: Enable AMD PLL fix
[ 31.776792] xhci_hcd 0000:00:10.0: irq 18, io mem 0xfeb4a000
[ 31.776885] xhci_hcd 0000:00:10.0: irq 48 for MSI/MSI-X
[ 31.776920] xhci_hcd 0000:00:10.0: irq 49 for MSI/MSI-X
[ 31.777146] xHCI xhci_add_endpoint called for root hub
[ 31.777190] xHCI xhci_check_bandwidth called for root hub
[ 31.777261] hub 1-0:1.0: USB hub found
[ 31.777297] hub 1-0:1.0: 2 ports detected
[ 31.777433] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 31.777473] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 31.780285] xHCI xhci_add_endpoint called for root hub
[ 31.780329] xHCI xhci_check_bandwidth called for root hub
[ 31.780399] hub 2-0:1.0: USB hub found
[ 31.780436] hub 2-0:1.0: 2 ports detected
[ 31.780543] xhci_hcd 0000:00:10.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.780600] xhci_hcd 0000:00:10.1: setting latency timer to 64
[ 31.780635] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 31.780673] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 31.780929] xhci_hcd 0000:00:10.1: irq 17, io mem 0xfeb48000
[ 31.781018] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 31.781053] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 31.781245] xHCI xhci_add_endpoint called for root hub
[ 31.781289] xHCI xhci_check_bandwidth called for root hub
[ 31.781358] hub 3-0:1.0: USB hub found
[ 31.781393] hub 3-0:1.0: 2 ports detected
[ 31.781502] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 31.781554] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 4
[ 31.784397] xHCI xhci_add_endpoint called for root hub
[ 31.784430] xHCI xhci_check_bandwidth called for root hub
[ 31.784493] hub 4-0:1.0: USB hub found
[ 31.784540] hub 4-0:1.0: 2 ports detected
[ 31.785260] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.785314] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 31.785363] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 5
[ 31.785405] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 31.785467] ehci_hcd 0000:00:12.2: debug port 1
[ 31.785526] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4f000
[ 31.800124] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 31.800381] hub 5-0:1.0: USB hub found
[ 31.800426] hub 5-0:1.0: 5 ports detected
[ 31.800575] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 31.800648] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 31.800698] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 31.800740] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 31.800804] ehci_hcd 0000:00:13.2: debug port 1
[ 31.800861] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb4d000
[ 31.820016] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 31.820236] hub 6-0:1.0: USB hub found
[ 31.820271] hub 6-0:1.0: 5 ports detected
[ 31.820930] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.820996] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 31.821039] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 7
[ 31.821105] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb50000
[ 31.884261] hub 7-0:1.0: USB hub found
[ 31.884311] hub 7-0:1.0: 5 ports detected
[ 31.884462] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 31.884533] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 31.884580] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 8
[ 31.884644] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4e000
[ 31.944186] hub 8-0:1.0: USB hub found
[ 31.944235] hub 8-0:1.0: 5 ports detected
[ 31.944362] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 31.944416] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 31.944452] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 9
[ 31.944510] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb4c000
[ 32.004245] hub 9-0:1.0: USB hub found
[ 32.004283] hub 9-0:1.0: 2 ports detected
[ 32.004581] ahci 0000:00:11.0: version 3.0
[ 32.004627] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 32.004727] ahci 0000:00:11.0: irq 52 for MSI/MSI-X
[ 32.004892] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 7 ports 6 Gbps 0xfd impl SATA mode
[ 32.004931] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 32.009602] scsi4 : ahci
[ 32.009824] scsi5 : ahci
[ 32.010050] scsi6 : ahci
[ 32.010213] scsi7 : ahci
[ 32.010363] scsi8 : ahci
[ 32.010529] scsi9 : ahci
[ 32.010677] scsi10 : ahci
[ 32.010837] scsi11 : ahci
[ 32.011601] ata5: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51100 irq 52
[ 32.012773] ata6: DUMMY
[ 32.012806] ata7: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51200 irq 52
[ 32.012845] ata8: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51280 irq 52
[ 32.012893] ata9: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51300 irq 52
[ 32.012930] ata10: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51380 irq 52
[ 32.012969] ata11: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51400 irq 52
[ 32.013016] ata12: SATA max UDMA/133 abar m2048@0xfeb51000 port 0xfeb51480 irq 52
[ 32.120025] usb 5-3: new high speed USB device number 2 using ehci_hcd
[ 32.274376] Initializing USB Mass Storage driver...
[ 32.274825] scsi12 : usb-storage 5-3:1.0
[ 32.274957] usbcore: registered new interface driver usb-storage
[ 32.274991] USB Mass Storage support registered.
[ 32.560018] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 32.560079] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560137] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 32.560196] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560242] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 32.560299] ata12: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 32.560580] ata7.00: ATA-9: WDC WD20EFRX-68AX9N0, 80.00A80, max UDMA/133
[ 32.560626] ata7.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.560947] ata11.00: ATA-8: ST2000DL003-9VT166, CC32, max UDMA/133
[ 32.560993] ata11.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 32.561209] ata7.00: configured for UDMA/133
[ 32.561773] ata11.00: configured for UDMA/133
[ 32.563779] ata8.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 32.563814] ata8.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.564285] ata5.00: ATA-6: WDC WD2500JD-00HBB0, 08.02D08, max UDMA/133
[ 32.564327] ata5.00: 488397168 sectors, multi 16: LBA48
[ 32.566291] ata10.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 32.566329] ata10.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.566492] ata12.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 32.566526] ata12.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 32.567782] ata8.00: configured for UDMA/133
[ 32.569759] ata5.00: configured for UDMA/133
[ 32.569893] scsi 4:0:0:0: Direct-Access ATA WDC WD2500JD-00H 08.0 PQ: 0 ANSI: 5
[ 32.570286] scsi 6:0:0:0: Direct-Access ATA WDC WD20EFRX-68A 80.0 PQ: 0 ANSI: 5
[ 32.570502] scsi 7:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 32.572474] ata10.00: configured for UDMA/133
[ 32.572682] ata12.00: configured for UDMA/133
[ 32.660017] usb 7-4: new low speed USB device number 2 using ohci_hcd
[ 32.868292] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.0/input/input4
[ 32.868415] generic-usb 0003:046D:C30F.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input0
[ 32.881147] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb7/7-4/7-4:1.1/input/input5
[ 32.881240] generic-usb 0003:046D:C30F.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-4/input1
[ 32.881304] usbcore: registered new interface driver usbhid
[ 32.881338] usbhid: USB HID core driver
[ 33.271305] scsi 12:0:0:0: Direct-Access SanDisk Cruzer Blade 1.00 PQ: 0 ANSI: 2
[ 33.280033] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 33.305314] ata9.00: ATA-8: WDC WD20EARS-00MVWB0, 51.0AB51, max UDMA/133
[ 33.305349] ata9.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 33.314972] ata9.00: configured for UDMA/133
[ 33.315074] scsi 8:0:0:0: Direct-Access ATA WDC WD20EARS-00M 51.0 PQ: 0 ANSI: 5
[ 33.315323] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 33.315536] scsi 10:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC32 PQ: 0 ANSI: 5
[ 33.315746] scsi 11:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 33.333300] sd 11:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333360] sd 7:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333415] sd 10:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333463] sd 9:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333524] sd 8:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333575] sd 6:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 33.333613] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[ 33.333753] sd 10:0:0:0: [sdg] Write Protect is off
[ 33.333787] sd 10:0:0:0: [sdg] Mode Sense: 00 3a 00 00
[ 33.333950] sd 8:0:0:0: [sde] Write Protect is off
[ 33.333984] sd 8:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 33.334046] sd 9:0:0:0: [sdf] Write Protect is off
[ 33.334079] sd 9:0:0:0: [sdf] Mode Sense: 00 3a 00 00
[ 33.334138] sd 7:0:0:0: [sdc] Write Protect is off
[ 33.334172] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 33.334224] sd 11:0:0:0: [sdh] Write Protect is off
[ 33.334257] sd 11:0:0:0: [sdh] Mode Sense: 00 3a 00 00
[ 33.334358] sd 10:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334526] sd 6:0:0:0: [sdb] Write Protect is off
[ 33.334561] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 33.334629] sd 11:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334808] sd 12:0:0:0: [sdd] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 33.334865] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.334982] sd 9:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335109] sd 8:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335222] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.335777] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 33.335862] sd 12:0:0:0: [sdd] Write Protect is off
[ 33.335896] sd 12:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 33.336251] sd 4:0:0:0: [sda] Write Protect is off
[ 33.336285] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 33.336346] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 33.336757] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.336792] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.339872] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.339909] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.344926] sdd: sdd1
[ 33.347492] sd 12:0:0:0: [sdd] No Caching mode page present
[ 33.347539] sd 12:0:0:0: [sdd] Assuming drive cache: write through
[ 33.347574] sd 12:0:0:0: [sdd] Attached SCSI removable disk
[ 33.376773] sde: sde1
[ 33.377154] sd 8:0:0:0: [sde] Attached SCSI disk
[ 33.377403] sdh: sdh1
[ 33.377691] sd 11:0:0:0: [sdh] Attached SCSI disk
[ 33.380652] sdg: sdg1
[ 33.381033] sd 10:0:0:0: [sdg] Attached SCSI disk
[ 33.395456] sdf: sdf1
[ 33.395801] sd 9:0:0:0: [sdf] Attached SCSI disk
[ 33.397545] sdb: sdb1
[ 33.397930] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 33.435935] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 33.436519] sd 4:0:0:0: [sda] Attached SCSI disk
[ 33.439473] mdadm: sending ioctl 800c0910 to a partition!
[ 33.439519] mdadm: sending ioctl 800c0910 to a partition!
[ 33.439696] mdadm: sending ioctl 1261 to a partition!
[ 33.439728] mdadm: sending ioctl 1261 to a partition!
[ 33.442061] mdadm: sending ioctl 1261 to a partition!
[ 33.442108] mdadm: sending ioctl 1261 to a partition!
[ 33.442467] mdadm: sending ioctl 1261 to a partition!
[ 33.442502] mdadm: sending ioctl 1261 to a partition!
[ 33.443944] mdadm: sending ioctl 1261 to a partition!
[ 33.443981] mdadm: sending ioctl 1261 to a partition!
[ 33.815407] sdc: sdc1
[ 33.815744] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 33.819038] md: bind<sdg1>
[ 33.823005] md: bind<sdh1>
[ 33.830376] md: bind<sde1>
[ 33.832743] md: raid0 personality registered for level 0
[ 33.833265] bio: create slab <bio-1> at 1
[ 33.833302] md/raid0:md127: looking at sdh1
[ 33.833336] md/raid0:md127: comparing sdh1(3907026944) with sdh1(3907026944)
[ 33.833414] md/raid0:md127: END
[ 33.833446] md/raid0:md127: ==> UNIQUE
[ 33.833478] md/raid0:md127: 1 zones
[ 33.833511] md/raid0:md127: looking at sdg1
[ 33.833554] md/raid0:md127: comparing sdg1(3907026944) with sdh1(3907026944)
[ 33.833623] md/raid0:md127: EQUAL
[ 33.833655] md/raid0:md127: FINAL 1 zones
[ 33.833689] md/raid0:md127: done.
[ 33.833733] md/raid0:md127: md_size is 7814053888 sectors.
[ 33.833766] ******* md127 configuration *********
[ 33.833798] zone0=[sdg1/sdh1/]
[ 33.833947] zone offset=0kb device offset=0kb size=3907026944kb
[ 33.833988] **********************************
[ 33.833992]
[ 33.835269] md127: detected capacity change from 0 to 4000795590656
[ 33.838003] md: bind<sdb1>
[ 33.842049] md: bind<sdf1>
[ 33.844170] md127: unknown partition table
[ 33.924815] md: bind<sdc1>
[ 34.090011] raid6: int64x1 1791 MB/s
[ 34.260030] raid6: int64x2 2819 MB/s
[ 34.430025] raid6: int64x4 2663 MB/s
[ 34.600019] raid6: int64x8 2518 MB/s
[ 34.770025] raid6: sse2x1 5795 MB/s
[ 34.940016] raid6: sse2x2 8139 MB/s
[ 35.110014] raid6: sse2x4 10354 MB/s
[ 35.110047] raid6: using algorithm sse2x4 (10354 MB/s)
[ 35.110907] async_tx: api initialized (async)
[ 35.111085] xor: automatically using best checksumming function: generic_sse
[ 35.160010] generic_sse: 5798.000 MB/sec
[ 35.160043] xor: using function: generic_sse (5798.000 MB/sec)
[ 35.161180] md: raid6 personality registered for level 6
[ 35.161216] md: raid5 personality registered for level 5
[ 35.161249] md: raid4 personality registered for level 4
[ 35.162194] md/raid:md126: device sdc1 operational as raid disk 3
[ 35.162258] md/raid:md126: device sdf1 operational as raid disk 1
[ 35.162302] md/raid:md126: device sdb1 operational as raid disk 0
[ 35.162337] md/raid:md126: device sde1 operational as raid disk 2
[ 35.162969] md/raid:md126: allocated 4272kB
[ 35.164323] md/raid:md126: raid level 5 active with 4 out of 4 devices, algorithm 2
[ 35.164368] RAID conf printout:
[ 35.164401] --- level:5 rd:4 wd:4
[ 35.164434] disk 0, o:1, dev:sdb1
[ 35.164472] disk 1, o:1, dev:sdf1
[ 35.164514] disk 2, o:1, dev:sde1
[ 35.164547] disk 3, o:1, dev:sdc1
[ 35.164615] md126: detected capacity change from 0 to 6000789159936
[ 35.210084] md126: unknown partition table
[ 37.116016] device-mapper: uevent: version 1.0.3
[ 37.116160] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 48.147927] systemd[1]: systemd 194 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 48.148113] systemd[1]: Running in initial RAM disk.
[ 48.148564] systemd[1]: Set hostname to <archboot>.
[ 48.148763] systemd[1]: Initializing machine ID from random generator.
[ 48.163323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 48.163530] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 48.163664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 48.163714] systemd[1]: Starting Remote File Systems.
[ 48.164039] systemd[1]: Reached target Remote File Systems.
[ 48.164095] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 48.164379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 48.164429] systemd[1]: Starting Delayed Shutdown Socket.
[ 48.164734] systemd[1]: Listening on Delayed Shutdown Socket.
[ 48.164802] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 48.165217] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 48.165268] systemd[1]: Starting Encrypted Volumes.
[ 48.165538] systemd[1]: Reached target Encrypted Volumes.
[ 48.165666] systemd[1]: Starting udev Kernel Socket.
[ 48.165964] systemd[1]: Listening on udev Kernel Socket.
[ 48.166045] systemd[1]: Starting udev Control Socket.
[ 48.166338] systemd[1]: Listening on udev Control Socket.
[ 48.166395] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 48.166498] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 48.166557] systemd[1]: Starting Swap.
[ 48.166826] systemd[1]: Reached target Swap.
[ 48.166869] systemd[1]: Starting Journal Socket.
[ 48.167200] systemd[1]: Listening on Journal Socket.
[ 48.167260] systemd[1]: Started File System Check on Root Device.
[ 48.167303] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 48.168421] systemd[1]: Starting Load Kernel Modules...
[ 48.170881] systemd[1]: Starting Setup Virtual Console...
[ 48.173799] FS-Cache: Loaded
[ 48.177917] systemd[1]: Mounting POSIX Message Queue File System...
[ 48.179690] systemd[1]: Mounting Huge Pages File System...
[ 48.180633] systemd[1]: Starting Apply Kernel Variables...
[ 48.181486] systemd[1]: Started Set Up Additional Binary Formats.
[ 48.181595] systemd[1]: Starting udev Kernel Device Manager...
[ 48.184266] systemd[1]: Mounting Debug File System...
[ 48.185010] systemd[1]: Starting udev Coldplug all Devices...
[ 48.185722] systemd[1]: Starting Journal Service...
[ 48.186733] systemd[1]: Started Journal Service.
[ 48.187650] systemd[1]: Started Remount Root and Kernel File Systems.
[ 48.187720] systemd[1]: Starting Local File Systems (Pre).
[ 48.187982] systemd[1]: Reached target Local File Systems (Pre).
[ 48.188037] systemd[1]: Mounting /tmp...
[ 48.188726] systemd[1]: Starting Load Random Seed...
[ 48.199278] systemd-udevd[1369]: starting version 194
[ 48.259482] RPC: Registered named UNIX socket transport module.
[ 48.259519] RPC: Registered udp transport module.
[ 48.259552] RPC: Registered tcp transport module.
[ 48.259595] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 48.264576] FS-Cache: Netfs 'nfs' registered for caching
[ 48.270453] systemd-modules-load[1361]: Inserted module 'nfs'
[ 48.275596] systemd-journald[1372]: Received SIGUSR1
[ 48.653395] scsi_verify_blk_ioctl: 184 callbacks suppressed
[ 48.653431] mdadm: sending ioctl 1261 to a partition!
[ 48.653475] mdadm: sending ioctl 1261 to a partition!
[ 48.653686] mdadm: sending ioctl 1261 to a partition!
[ 48.653725] mdadm: sending ioctl 1261 to a partition!
[ 94.390769] r8169 0000:02:00.0: eth0: link down
[ 94.390805] r8169 0000:02:00.0: eth0: link down
[ 94.391909] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 96.827209] r8169 0000:02:00.0: eth0: link up
[ 96.828288] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 107.460005] eth0: no IPv6 routers present
and /proc/cpuinfo:
processor : 0
vendor_id : AuthenticAMD
cpu family : 21
model : 16
model name : AMD A6-5400K APU with Radeon(tm) HD Graphics
stepping : 1
cpu MHz : 3593.482
cache size : 1024 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 16
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rditbane wrote:
Sorry fore double-posting, but there's something new:
At beginning, the PC continued booting after throwing this issue. But now, Booting sometimes just stops at the very moment when the CPU is not responding.
...sounds like a hardware problem to me given the sporadic nature. -
How do you shut down a computer safely when Finder is not responding?
I've been having some problem with my Mac OS X lately where Aperture has been "not responding". Stupidly, I used forced shutdown of that program until I learned how bad this is. So today I'm working on my mac (trying to learn what's wrong with Aperture) and the beachball for Finder starts spinning and the program is not responding. How do I restart or shut down without damaging anything? I could "force quit" but don't know if this is bad for Finder, as it is bad for Aperture. Help!
Hi suzyfromks,
Welcome to the Support Communities!
If a single application is unresponsive, you don't have any other option but to Force Quit.
Then I would suggest quitting your other open applications normally, and starting the computer in Safe Mode as explained in this article.
Mac OS X: How to troubleshoot a software issue
http://support.apple.com/kb/ht1199
Regarding Aperture, I would suggest making sure you have a Time Machine backup of your computer, and follow these troubleshooting steps:
Aperture 3: Troubleshooting Basics
http://support.apple.com/kb/ht3805
I hope this information helps ....
- Judy -
My Thunderbird email is not responding. I have been unable to open it.
I tried rebooting my PC several times, but the result is the same. None of my mailboxes or address book can be utilized. The page is blank and says that Thunderbird is not responding. How can I get this to work again? All of my other programs are working correctly so it must be a problem with Thunderbird only.
Worse yet, mine were installed from DVD and it won't let me upgrade because it claimes it's tied to another account. So, like you, I can't buy or upgrade my iPhoto leaving me dead in the water because I have mistakenly upgraded Aperture so my library is now incompatible!
I see reports that Apple has corrected this issue for some, but it's not for us. -
RAW adjustements not responding
I was working 'fine' with Aperture (I'm still on the fence regarding whether I'll be using it full-time in my workflow as it's not the application I expected) and now mid-project the RAW adjustments are not responding. I can't adjust the expoosure or white balance nothing in that window in any view.
Did I 'lock' a whole bunch of images accidentally?
I've tried to open another project and the I'm getting the same problem with the adjustment panel with other images.
What's going on here?In fairness to the person having the problem -- if it is an intermittent problem, it is sometimes a good idea to wait and not restart, so that when you get a support person you can reproduce the problem.
Restarting and have it clear up doesn't make me feel better that there is an unresolved bug out there just waiting to jump up and bite when I'm trying to hit a deadline.
Brad -
I7 Fully loaded iMac becoming unusable slow apps not responding with Mavericks
Very frustrating. My 2012 iMac with an i7/16Gig memory is crawling with Mavericks. It didn't start out that way, but it's almost unusable now. I will get a few minutes of seeming to work fine, then periods of long lasting slowness. Evening typing an email will have a delay where typing will not come out as I am typing it for a few seconds, then it all bursts out. Simple interactions get spinning beach balls from 5-45 seconds. The activity monitor shows nothing taking any particularly large amount of processor load, memory pressure and status is all green & good. Some disk activity but nothing that should account for the lags. Loading applications, the system grinds to being unresponsive. Adobe applications and running aperture have delays in activity from 5-60 seconds in simple interaction. The activity monitor then shows several of the larger apps (iTunes, Aperture, Premiere Pro) as Application Not Responding. It can take from to 30 seconds (if Im lucky) to several minutes for the system to become responsive again. Sometimes it never does.
I have run DiskUtility /repair permissions several times with no real results. There are documented issues with Finder being slow to pull up files and directories. I ran the fix for that as well as the slow restart/bootup issues documented. Those fixes made a difference but not with the overall issue of the system just grinding to a halt.
Has anyone else seen this, any suggestions on what to do to fix it? Im spending more time fighting the computer than getting my work done.Very frustrating. My 2012 iMac with an i7/16Gig memory is crawling with Mavericks. It didn't start out that way, but it's almost unusable now. I will get a few minutes of seeming to work fine, then periods of long lasting slowness. Evening typing an email will have a delay where typing will not come out as I am typing it for a few seconds, then it all bursts out. Simple interactions get spinning beach balls from 5-45 seconds. The activity monitor shows nothing taking any particularly large amount of processor load, memory pressure and status is all green & good. Some disk activity but nothing that should account for the lags. Loading applications, the system grinds to being unresponsive. Adobe applications and running aperture have delays in activity from 5-60 seconds in simple interaction. The activity monitor then shows several of the larger apps (iTunes, Aperture, Premiere Pro) as Application Not Responding. It can take from to 30 seconds (if Im lucky) to several minutes for the system to become responsive again. Sometimes it never does.
I have run DiskUtility /repair permissions several times with no real results. There are documented issues with Finder being slow to pull up files and directories. I ran the fix for that as well as the slow restart/bootup issues documented. Those fixes made a difference but not with the overall issue of the system just grinding to a halt.
Has anyone else seen this, any suggestions on what to do to fix it? Im spending more time fighting the computer than getting my work done.
Maybe you are looking for
-
Retraction between BW (BPS) - R/3 (EA-PS)
Hi all, Im trying to do retraction between BW -> R/3 systems. I define field assignments for every BW objects defined as filter and it works fine if FM Area, Version and Fiscal Year correspond to the value entered on the selection screen. But
-
Hi All, what is the bapi for f-30 -clearing GL transaction, i have tried BAPI_ACC_DOCUMENT_POST but the item is not cleared, did i miss anything from the bapi
-
I'm trying to upgrade from FB3 to FB4; If I tell FB4 that I'm using BlazeDS it seems to require or expect a "RDS Servlet" [which appears to be a feature of the future/unreleased BlaseDS 4] Is there a way to use FB4 with BlazeDS 1.0.2? Obviously, I ca
-
Using variables in shape's coordinates - urgent
Hi, how can i draw using a variable to set the shapes coordinates ? i need to increment this variable to continue drawing in the panel at the last position. LIKE THIS: g.fillRect(490,210,300,100); ==> it works g.fillRect(x+100,y+100,150,150); ==> it
-
Oracle HTTP JSP gets very slow on 9i
PLateform : Windows 2000 I have changed from Oracle 8i to Oracle 9i. Than I installed Oracle Chartbuilder from http://otn.oracle.com/software/tech/java/servlets/htdocs/utilsoft.htm On the 9i Apache this application runs very very slow It looks a litt