Aperture 3 Slideshow keeps defaulting to Black and White?

It seems every time I am moving photos around in the bottom panel of the slideshow all of the photos go black and white. I am holding command key, selecting multiple photos and moving them with track pad. I end up selecting all photos unchecking the black and white box and it seems OK until the next time I move a photo. Anyone seen this one yet?

No, it sounds like a software problem.
Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
If these don't work try using Settings > General > Reset > Reset All Settings

Similar Messages

  • Importing default treatment black and white?

    Whenever I import photos now (LR4), they auto preset to black and white on 'Treatment' on the develop tab rather than 'Color'.  I've uninstalled and reinstalled the program hoping to get rid of preferences but it continues to do so.  I can't find the setting anywhere, please advise.

    At some point you have changed the LR default processing for the images of this type (LR remembers a separate default for Raw and for camera JPG, for each camera model).
    These settings are what you get when you import a fresh image that does not already have any editing to say otherwise; or, when you press the Reset button.
    The settings are shared with Adobe Camera Raw, outside the LR program data, so have not been removed and replaced when you reinstall. This is "user" data in other words; LR does not know that this was not deliberate.
    To undo this changed default, click on an example image that this is happening to. Then in Develop, hold the Alt (Option on Mac) key down, and the "Reset" button at lower right changes to "Set Default..." - click that.
    A dialog opens where you can do one of two things: put back the processing (Develop) factory default that Adobe originally supplied, or else, take the Develop settings of the current highlighted image and make those into a new, customised default (which is how this will have all got altered in the first place).
    Once LR is returned to the Adobe factory default, which I recommend, new imports will once more start out using that. If you then click "reset" on already-imported images (the ones accidentally turned into B&W) they will adopt these same settings too; though note: this will also clear all Develop work you may have done on these images.
    You can still customise this default differently, as you wish - you do not have to settle for the Adobe settings in particular. Those are just one "known baseline" option that will get you started acceptably. But whatever change you do make to these defaults, needs to be something that you actively want future imports to initially show.
    regards, RP

  • How come my ipad keeps on going black and white with the lago

    hi
    i was just on my ipad trying to get music off my ipad to my laptop than a note came up and said do u want to update your ipad i than press update 30 mins later my ipad keep going black and white with the lago
    pleases help me or tell me what i can do with this/fix

    The update does take time and 30 minutes is not unusual. Is there anything else happening on your screen such as a long bar that fills in very slowly?

  • I just upgraded my firefox to the latest version, and it keep flickering in black and white, it makes it almost impossible to see or read anything, any suggestions?

    I just upgraded firefox to the latest version, and everything seems to be flickering? Mainly ads and text boxes.
    It makes it almost impossible to browse.
    Any suggestions?

    Take a look at the [[Firefox Hangs]] article. It should have some useful information that may help fix this situation. If that does not help, you may need to try Firefox in [[Safe Mode]] and if it works, try the following step:
    Deactivate all plugins in Safe Mode. If Firefox works alright in without Safe Mode, then activate each plugin one at a time until the problem appears again. It will probably be this plugin that is causing the problem.

  • Set default fax to black and white

    I have been sending faxes by sending doc files to print and selecting the Officejet fax as my printer option.
    Annoyingly, it keeps reverting to "send color" . I would like to set "sending black and white faxes" as the default. 
    How can I set the default to Black and white?
    I cannot find, in the manual, any reference to setting the default.
    Thanks for any insight--even a page number in the manual would be helpful.

    Hi @deepthinker,
    Welcome to the HP Forums!
    I noticed that you are trying to set default fax to black and white instead of color with your HP Officejet 5610 on Windows 8.1 (64-bit). I am happy to look into this for you!
    I would recommend to open your HP Solution Center (should be a printer icon on your desktop.) Then click on Settings, then click on Printer Settings,  click on the Features tab at the top of the screen, look for the Color Options section near bottom left, and click on Print in grayscale, click the down arrow on High Quality, and select Black Ink Only.
    Here is an image of what I am seeing.
    If that doesn't work try the following:
    Open the HP Solution Center, select Send A Fax, and then look for Black and White only.
    Here is another image to illustrate.
    Hope this information helps, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Credit card statement printing in color when black and white chosen.  Wasting INK!  Not a printer problem.

    I have tried to print my business cc statement 3 times and even though I have my printer default to black and white and I verified that in the print dialog box it still printed in color three times.  I called printer company - no problems with that....I called cc company to see if they had a special down load issue - not problems with that.  They open in Adobe as a pdf so it must be that.  I saved it and tried to print it and it DID print correctly then.  But, I do not want to have to save the statement each time.  I have never had this issue before.  Printer is only a couple months old.  Programs are all up to date.

    Hi Pat,
    It seems to be happening only in Google Chrome.  And it has happened with other sites, too, when downloading something to print.  I attached a screen shot.  As you can see, it shows black and white for printing but it still printed in color. 
    Are there setting in Chrome that I can't seem to find?  Thanks for your input. 

  • Adding color to a black and white photo

    I've searched everywhere on here and on Youtube and can't seem to find how I can add color to a black and white photo using Aperture 3 that was taken in black and white.

    Hi, and welcome to the list. Make sure you read the [Help & Terms of Use|http://discussions.apple.com/help.jspa] section when you get a chance.
    It's not a good idea to insert a new question into someone else's post. First as you are not the originator of the post you can not assign solved or helpful ratings to any answers you get here. And the forum really relies on those to help other users locate meaningful responses.
    Secondly your question is less likely to get answered. readers of the post will be looking to either give advice on the original question or else be looking for answers to the question. A new question stuck in between the other replies is less likely to be noticed. It's always best to start a new thread and if something in another post applies you can always link to it.
    Now to your question. There was a great solution given to your very problem back a little while ago, see: [Topic : Black, white, and color?|http://discussions.apple.com/thread.jspa?messageID=12805425&#12805425]
    (see how I worked that last bit of advice into this post )

  • I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo

    I am going to sell my second generation ipod touch, so i resetted it to factory defaults. It said it would take up to an hour, and i patiently waited. But when the black and white loading bar completed, the ipod went to the black screen with an apple logo on it. Sounds about right, right? But now, there is a processing circle on top of the logo, but the circle spins once, and stops at about halfway to the bottom. It just stays there, and about every half to one hour it becomes a white screen and starts all over again. (not the loading bar part, just the circle). I've tried holding the power and the home button, and it works, but it just goes back to the circle screen with the apple logo. HELP PLEASE?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I amusing elements 12.

    How do I select a black and white sketch from a white background and keep the filled in area of the sketch?  I want to copy it to a colored background. I am using elements 12.

    oesrowstreasurer
    Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
    Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
    https://forums.adobe.com/community/photoshop_elements
    The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
    We will be watching for a confirmation on what program you are using.
    ATR

  • How do I set my Ricoh Aficio SP C220N to Default to print only Black and White?

    HI Guys can you help?
      How do I set my Ricoh Aficio SP C220N to Default to print only Black and White? When I check print Grey Scale box it uses the other colours to create the black instead of using the black toner cartridge. doing this from a PC works fine but not of a Mac and I am a newbie at this can you help as I don't want to waste any more colour ink unnecessarily.   

    Hi,
    Follow the steps below to print using Black Ink only:
    1. From the application used to print, click the File menu and select Print. The Print window appears.
    NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
    2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    3. Select Paper Type/Quality from the drop-down menu.
    4. Click the triangle next to Color Options to expend the settings.
    5. Set the Color field as Grayscale.
    6. Set the Grayscale Mode as Black Ink Cartridge Only.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    Any used preset will remain default so simply select teh standard preset to print in color.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Setting Black and White as the default when printing to a Canon Image Class 4080i

    Hi,
    I've got two Canon Image Class 4080i's that we are printing to at the school I work at.  I have installed the Canon UFRII V2.40 Printer Driver for Mac OS X and we are able to print to them fine through any macbook running 10.5 to 10.7.  My question is, how do I make the default printer setting be Black and White instead of color?  I know how to change it from Color to Black and White by navigating to the Quality menu through the Print screen but I have to do this every time I print.  Is there a way to make black and white the default?
    Thanks in advance,
    Cheryll

    You’re really going to take photos straight out of camera on a 5d3 and print them with a blindly applied B&W conversion from the printer?  I would highly discourage that, but if that’s what you want to do I’m sure it’s possible.  Sorry, I have no experience with that printer so I can’t help.
    Do you have a laptop?  My recommendation would be to use a photo processing software like Lightroom (if you don’t have it LR5 is ridiculously cheap right now), play around before the event to get a B&W conversion that you like – even the preset ones are going to be better than whatever conversion the printer does -  and then print from LR.  It’d hardly take any extra time, and you could get a brief review of the conversions on a laptop screen before printing. 

  • How to have "black and white only" be the default print option

    Just installed a new printer and would like to set it up so that the default print option is black and white only. How do I do this?

    Can't find this anywhere. I'm brand new to Macs so I
    might need more detailed instructions.
    I have an HP Photosmart C6100 by the way.
    Not sure which post you are responding to since you replied to yourself
    Every printer is a little different so you may have to do some searching through the settings. I don't have an HP Photosmart C6100 here so I can't say for sure where the setting is for that printer.
    The closest thing I have to that model printer here is an HP OfficeJet 6310
    In that model you choose Paper Type/Quality
    In drop down menu under Color you select Gray Scale
    Then you can still save the preset as I described in my previous post.
    If the C6100 is different than that you may just have to search through option pages and explore the drop down selections.
    Which I could be more specific, but they are all a little different.

  • Why does my photoshop keep giving black and white lines when I use my lasso tool?

    why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
    Can ANYONE help me?

    I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

  • Screen isn't keeps turning black and white on my blackberry 9000

    can somone help me find a way to fix my screen. it keeps changing colors and turing black and white.

    Hello swaggberry,
    Welcome to the forums. 
    In this case we can try to reload the software on the BlackBerry® smartphone to make sure it is running the latest version and there are no issues with the OS.
    Here is how to backup your BlackBerry smartphone http://bbry.lv/oPVWXc
    Once you have backed up your BlackBerry smartphone please follow the link below to complete a clean reload of the BlackBerry smartphone software.
    Link: http://www.blackberry.com/btsc/KB03621
    Once completed test it and proceed with selective restore, here is how to restore http://bbry.lv/qgQxLo
    Hope this helps, have a good day. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How do I undo black and white default in photoshop?

    Whenever I place a colored photo into photoshop it automatically is placed as a black and white photo by default.  I don't want this to happen.  How do I fix this?

    You have to be sure the file you are placing it into is rgb mode and not grayscale.
    If you File > Place a color photo into a grayscale document, it will turn grayscale.
    So before you do that, go to Image mode in Photoshop and select RGB.

Maybe you are looking for