Aperture 3 suddenly telling me Graphics card not supported

I have a Macmini 1.66ghz Intel with GMA 950 card.
I've been using Aperture without issue but tried to open it this morning and received the message that the Graphics Card isn't supported. Running 10.6.3 and the latest version of Aperture 3.
Any ideas??
Thanks.

I got this message today after my MacPro computer froze last night while I was uploading some photos to SmugMug:
ERROR
The installed graphics card does not meet the minimum requirements for Aperture.
WT**?
I am having the full array of problems other people have posted about the upgrade to 10.6.4. I upgraded to Ap3 at the same time. I do not need any other heart ache with my Mac. Please help.

Similar Messages

Graphics card not supported - GMA X3100

I've replaced a Macbook 2.0GHz from 2006 with 64MB shared video memory with a brand new 2.2 GHz with 144MB shared video memory. But when I start MainStage, I get the message that my graphics card is not supported.
Any idea why is that?
I haven't done any updates. Would that do it?
Thanks.

Thanks Blueberry

Graphics card not supported?

I have a 2008 Mac Pro, 8 core, 2.8GHz system. It has the ATI Radeon 2600 video card, with 256MB of GDDR3 RAM. I want to purchase and play the upcoming Bioshock 2 game, but it says that my card is not supported, but I am curious if the game will still play, but maybe at lower settings, or lower frame rate. My question is does "not supported" mean that it will not run at all?
Jared

Thanks,
Sounds like I need a better card, or forget about this game.
Jared

Graphics Card not enabling while i install REDHAT LINUX 5.

I use HP PAVILLION MODEL DV5-1106AX. It contains AMD processor and ATI graphics card.While i try to install REDHAT LINUX SERVER 5 in my laptop, the graphics card not enabling.Why it happen?
please reply to <text removed for privacy>
Message Edited by WendyM on 11-18-2009 12:51 PM

MisterAnderson wrote:Does the same happen with the opensource radeon drivers? (xf86-video-ati)
Thanks for the reply!
The open source driver doesn't support my card yet. I tried installing it first since its the recommended driver, but Xorg couldn't detect any display at all.
It seems the PCI BusID is not being read from the xorg.conf file. There's auto detection everytime the PC boots.
Last edited by hdhiman (2012-10-04 00:43:52)

Graphics Card Not Available

I have purchased Compaq 15-s103TX Notebook on 25th December, I have installed Windows 7 ulimate 32bit,
After intallation i cheched system device management, In display adapter my system shown only standard VGA adapter,
NVIDIA 2GB Graphics card not available,
Kindly Help me....

Hi:
You notebook is not designed to run a 32 bit operating system and there are no graphics drivers for it from HP.
You will have to try these steps and if they don't work, I'm afraid you are out of luck...and will need to install a supported 64 bit operating system.
1. Install the Intel chipset driver and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816
2. Install the Intel HD graphics driver and reboot.
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24246
3. Install the nvidia graphics driver and reboot.
http://www.nvidia.com/download/driverResults.aspx/80914/en-us

TS4317 graphics cards not work

video file is not working graphics card not working is their is any software that i can update. or tell me why its not working

If you can see an image on your screen then your graphics card (Intel HD Graphics 3000) integrated into your 13" machine is working just fine.
I'm not sure what you mean when you say that a video file isn't working... how exactly isn't it 'working' and what file format is it in?
Clinton

Intel Graphics Processors Not Supported!?!?!?

So I read the Logic Studio system requirements and bought the new version for my Core 2 Duo white MacBook, since it fits the specs. I'm just about to install and I read the "Before You Install" doc.
It says about STP and Compressor, "Integrated Intel graphics processors not supported.) Whatthe?
What does this mean? That STP and Compressor won't install on my MacBook?
Shouldn't this have been in the Logic Studio system requirements?
I'm stuck and don't want to install now at all.
Help?

Well, it all installed, though when I launched STP, it threw up a dialog that said it might not work properly with less the 128 MB VRAM. Oh, joy. We shall see.
Apple really needs to put this on their LogicStudio System Requirements page.

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

Sim card not supported after unlock iphone 5c

iphone 5c, 12.7 GB, version 8.1.1, after unlocking when i connect it to itunes w/ other sim, sim card not supported error registered,. i check it to IMEI and its unlock, but why icant use it? I try to restore to itunes and erase my iphone nothing works, what can i do?

How was the phone unlocked? Was it unlocked by your previous carrier? The only way to unlock your phone is to have your previous carrier unlock it for you.
If you phone was unlocked in any other way, this constitutes hacking or jailbreaking and your phone will not work with another sim card.
Get the phone unlocked properly by your carrier and there is no reason why it should not work.

I phone blocked! Sim card not supported!

I phone blocked! Sim card not supported!
Recently bought an Iphone here in the Republic of Congo for about $600 and it was working fine until an update on Itunes. Now the phone just shows a USB cable and I tunes logo. When I connect the phone to Itunes it wants to restore and update, but then just blocks the phone again.

Who did you by the phone from? Apple? A telecom company? Ebay?
The phone was most likely jailbroken and unlocked. Applying the latest firmware updated undid that.
A

I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

That message occurs when updating a phone that was hacked to be used with your network. Upgrading the phone has re-locked it to it's rightful carrier. You will need a SIM from the original carrier to proceed.

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

1st think my billing info is not support debit card not support by apple 2nd think is my old I'd is not working even free app in app store......

My 2011 Macbook Air is telling me it does not support the 10.8.2 software update

My 2011 Macbook Air is telling me it does not support the 10.8.2 software update

Hmm, there are some machines to which the presently available 10.8.2 updates don't apply, but since it's typically the newest ones (from 2012) and the update shows up in your Software Update, it should work on yours.
You may try taking it step by step:
Go to http://support.apple.com/downloads/#osxmountainlion and start at the bottom of the list with the 10.8.1 update. If that works, keep working up the list as far as relevant.
If you want to save time and hassle, or you get stuck with 10.8.1 already, follow this routine to re-install the system from the Recovery Partition. You should then get the latest and greatest. Don't forget to first make sure your backup is up-to-date!

GTX770 graphics card not recognised - Z97 Gaming 5

I have a GTX650Ti and a GTX770 into my Z97 Gaming 5. The GTX650 works fine, but the 770 is not recognised by the board at all.
I tried the 770 in every slot, with or without the 650.
I tried swapping the power cables to both cards and it did not make a difference,
I then removed the 770 and put it in the board I was replacing, using the same cables and power supply and it worked fine.
The BIOS has been updated to version 1.3
I checked the board explorer in the BIOS and it shows that slot as empty.
Any clues why this would happen? Is there anything I need to do to get this card to work?

list full and detailed system specifications, see >>Posting Guide<<
Quote
I have a 750W power supply
brand? exact model?
Quote
GTX770 graphics card not recognised
is this MSI card? if so which one model exactly?

Aperture 2 says my Graphics card is unsupported.

I just downloaded the Aperture 2 trail. It installed fine, but reminded me that I needed to update Mac OS X to version 10.4.11 when launched (I was running 10.4.10 at the time).
So, I updated to 10.4.11 with no problems. Now when I launch Aperture 2, it says that my graphics card is unsupported, despite the fact that it's specifically listed as one of the supported cards on the Aperture 2 "Technical Specifications" webpage. In fact, it is listed as one of the "Recommended" cards.
I'm using a MacPro (2.66 GHz Dual Core Xeon) with the stock NVIDIA GeForce 7300 GT.
This setup worked fine with Aperture 1.5.6, but now it also reports the same error at launch.
Suggestions, anyone?

I figured it out. It turns out the culprit was Apple Remote Desktop's (ARD) "Curtain Mode".
I was not actually in front of the Mac Pro when I launched Aperture 2 for the first time -- I was controlling it with ARD from my Mac at work, hoping to get Aperture started building previews while I was at work. Apparently, something about Remote Desktop's "Curtain Mode" caused Aperture to incorrectly identify the graphics card. Very odd.... Anyway, by disabling "Curtain Mode" I was able to launch and use Aperture just fine.
Only time & testing will tell if it's the App I've been waiting for, but it's definitely an improvement over 1.5.x.
Thanks for the replies.

Aperture 3 suddenly telling me Graphics card not supported

Similar Messages

Maybe you are looking for