Aperture 3 Update Fails to Recognize That I Have Aperture 3
I never have had this happen before. I downloaded the Aperture 3.0.1 update, and the OS wouldn't let me install it because it said I had to have Aperture 3 installed. I DO have Aperture 3 installed. Software Update also failed to show the Aperture 3.0.1 update, so I think it, too, doesn't see that I have Aperture 3 installed. So, any thoughts on how to solve this conundrum?
Thanks!
RLK
No, it's not the trial version. I purchased the full-meal deal. I installed it and have been using it steadily with no problems. I keep all my software up-to-date, and am frustrated with this problem. It just seems that in the installation somehow the Aperture version wasn't noted in whatever spot it should have been recorded.
RLK
Similar Messages
-
Latest update does not recognize that I have ios 5.1
iMovie is saying there is update requiring ios 5.0.1. My iPad already has ios5.01. I deleted the app, but can't reinstall because of same error message. Anyone else have this issue and know how to fix it?
no problem. Needed to update ios software. Problem fixed.
-
I've got movies on my computer on itunes, however my parents wish that i use my laptop for itunes stuff, and i cant figure out how to get those movies to be able to sync with my ipod again, it wont recognize that I have them. Suggestions?
While you're in itunes, with the leftside window open, click on Apps. Then, look across the top middle of your itunes screen. You will see several choices: All, Iphone/iPad Touch, Ipad, Ipod Games, List, and Updates.
Clicking on each of these gives you a different view.
When you select ALL you will see all of your apps. When you select Updates you sill see only the apps that need to be updated. When you are in Updates you will see the Update button in the lower right corner.
Hope this helps. -
Audition CS6 doesn't seem to recognize that I have a 5.1 system while mapping channels. Any ideas?
Hi there everyone. I'm trying to mix in 5.1 surround sound. I started a project and set it to 5.1, and I can edit everything just fine. The problem is that I can't monitor my results, because Audition doesn't seem to recognize that I have a 5.1 system (Logitech Z-5500 5.1 Digital) hooked up via 6-channel direct. It's not recognizing more than two channels. Does anyone know what's going on?
I have an Alienware M17x-R4 laptop running Win 8 Pro 64-bit. My sound card is a Creative Sound Blaster Recon3Di.
Here's what my preferences look like.GrizzlyAK wrote:
I think there is something else going on.
I think you're correct, although I can understand entirely why ryclark said what he did - there are at least two reasons! Firstly, Creative Labs have history with piss-poor driver software (and hardware), and secondly (as an extension of this), it's quite normal for a lot of sound device manufacturers to provide only the minimum MME requirement as far as Microsoft is concerned - and that's just a two channel stereo output.
MME is obviously quite capable of supporting multichannel devices, albeit at higher latency values. If you are looking at just a playback situation though, this doesn't really matter. What may have happened here is that the driver software on your machine, and on the OPs, are simply at different version levels, and that all that's required is for the OP to update it.
For anybody serious about this though, I'd still recommend upgrading to an external sound device as any internal device, whoever made it, is inevitably going to be compromised in terms of performance. There are several reasons for this, but primarily they are too close to a load of digital noise within the machine, and this limits their signal to noise ratio. External devices are a lot better from this point of view, and usually you aren't limited by ridiculously flimsy 3.5mm jack connectors either. And inevitably, internal sound devices are built down to a price, not a performance point - not so good. -
My email internet accounts does not recognize that I have deleted an gmail account. It wants to connect before it sends a message. How do I change this? I thought I changed all my settings to reflect my new mail address - but I must have missed one.
mikeyg0 wrote:
I have deleted a email address that is connected to my apple account this has caused me some problems with icloud syncing etc.
That was a bit of a bonehead move. Did you actually change the email address associated with the Apple ID before deleting the email account?
mikeyg0 wrote:
ive set up a new emal address for my new mac.
That's another bad idea.
mikeyg0 wrote:
i cant purchase any apps or mnusic etc for my iphone or ipad.
Yeah, because the email associated with the Apple ID is deleted and the account is having issue.
Stop using the new Apple ID.
Log into the original Apple ID. Change the email address associated with the Apple ID.
It should then be possible to update the apps associated with the original Apple ID. -
i just downloaded AOL Desktop 1.7 for Mac and I can't get my email to work. It welcomes me but I know I have new email but it doesn't recognize that I have ANY mail at all. HELPPPPPPPP Please
Hey I've been all over and can't get any help. I'm well aware its not an Apple product but its an app for Mac OS so I thought I'd try here. I bought 2 new iMacs yesterday for my parents (5K) and I'm just trying to get them some help as there in their 70's and AOL is all they know.
But hey thanks for your help, -
My I-cloud says I have no devices set up even when i'm logged in to my apple ID account, how do I fix this problem? Please respond quickly, I lost my I-pod and even when I try to place it in lost mode it still won't recognize that I have a device. What do I do?
If you did not set up find my iPhone on the iPod, you can't find it.
-
what can i do if i accidentally deleted my iPhoto from my macbook air and the App Store couldn't recognize that i have bought it before and required me to buy it again ... should i buy it again or what ? i can't manage my photos now ...
Log into the app store using the Apple ID you used to set your computer up. Look under purchases. If it is not there you may need to accept it or to unhide it
LN -
For the last 3 or 4 versions of iTunes, and continuing in 11.05, the site recognizes that I have a 64 bit OS (Windows Vista) and downloads the 64 bit version of setup. Setup installs iTunes in the 32 bit application directory (Program Files x86) - it's not all that unusual to run a 32 bit app under a 64 bit OS - BUT whenever I connect any of my iPhones, I get an error message that say I cannot use the iPhone because the 64 bit version of iTunes is not installed. The message then tells me to de-install iTunes and to install the 64 bit version.
Like I say, the 64 bit Setup version is selected for me, and it runs error-free, but I seem to have no control or ability to force the installation of a 64 bit iTunes app. And all the iPhones are inoperative with the 32 bit version I have. I have another PC, which I have held at an earlier iTunes release. Although it's a notebook, it's identical in every other way (OS & installed utilities and apps) to the desktop that has developed the problem, and my iPhones work fine with it, although iTunes on it is at the earlier release, and I have no intention of upgrading that version until I understand and have corrected the problem.
Any ideas or suggustions?
Thanks.This iPhone cannot be used because the required software is not installed. Run the the iTunes installer to remove iTunes, then install the 64 bit version of iTunes.
That usually indicates that your Apple Mobile Device Support has not installed. That's also what is being shown by the diagnostics (the driver is there but the application isn't).
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
How do I get iTunes to recognize that I have already downloaded a song?
I have a song I have purchased and downloaded. When looking at the "Songs" view the song is listed twice. One with a cload download button next to it even though I already have it downloaded. I deleted the existing file and it was still listed twice, this time with a cload button next to both listings. How do I get iTunes to recognize that I have purchased it only once?
I've tried all of that and iTunes still won't sync my phone. I've deauthroized my computer than reauthorized it. I've deauthorized all computers then reauthorized my computer and every time I go to sync, iTunes keeps telling me my computer isn't authorized.
-
The time to update apps. After that apps have a blue points ahead apps.
The time to download apps or update apps. After that apps have a blue points ahead apps. How to fix?
I don't think there is anything wrong with the apps. This could be an indication that the app has recently been updated or downloaded but you have not launched it yet similar to iOS style indicators.
-
CC doesn't recognize that I have an account and signed in
I am signed in, I open photoshop or illustrator and I get the 'continue trial' box. I have CC on two machines- one laptop (Macbook pro) and one desktop (macpro) and on the macbook pro the application manager doesn't recognize that I have paid for the subscription. I have signed out and then signed back in a few times but no help
Illustrator CS6 on Mac OSX Lion. It crashed once when we were trying to save, and once when we tried to reopen a file. When it crashes we reopen it, sign in again (this is when the trail message comes up). It signs in fine, but the file gets corrupted.
Right now I just uninstalled and reinstalled and will see if that helps. -
My IPhone 5 will not recognize that I have an Itunes Match account. When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match. This does not happen with my Ipad. Any Ideas what to do?
SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
i have done the update, but any apps that i have downloaded did not transfer. where do i go to get them back on my homescreen?
you need to go to APP STORE, Then click on Purchased and you will see all the program which u can download from iCloud. I hope u made an account otherwise u will need to install everything again. The most important when u install a new iOS is to backup all your files first and then u can proceed installing the new one.
-
My iPad is operating on iOS 5.1.1 and will not support certain apps which I want to download as they say I require at least iOS 6. I have checked my updates and this says that I have the correct settings
Correct, the iPad 1 can not be upgraded beyond 5.1.1.
Maybe you are looking for
-
Hi everyone, my son has a Touchsmart 310-1126. We need a new hard drive. Any idea where to find one or a compatible one? I don't want to spend huge money, maybe $50 or $60. I've found them for about $80. Thanks for your help.
-
Quick preview of jpeg using subsample
Hey, Consider that you have a folder with many "medium sized" JPEGs, let's say: 2MB, 500KB, or so... You want to explore that folder, without loading all files into memory, but in the same time you want to see a small preview of each image file (just
-
Hi, Im using B1WS. When i try to connect to login.login(), im getting the following error. The request failed with HTTP status 404: Not Found. im trying to execute the sample ASpNet project. Thanks Amudha
-
Label positioning with MapViewer
Hello, Is it possible to position by myself the label for one geofeature in a MapViewer request? Thanks.
-
When I was using Adobe Bridge on my PC (i'm a recent Mac OSX 'switcher'), it was using Adobe Camera Raw and had something called 'Shadows' - along with Exposure, Brightness, Contrast and Saturation. I'm sure it's just a combined effect, but I'd like