Aperture 3 Viewer Issues
Today I started seeing some issues with my viewer and viewer modes in A3.
I'm not sure if I've hit a setting and changed it accidentally or what, but right now when viewing just a single photo, its off center in the viewer, shifted right.
When I view in grid mode, some of the pictures run off the viewer to the right and I'm not able to access them. Can't scroll to see them, nothing.
I hope this isn't a bug.
I suggest you lodge a bug report. Here is a copy of the bug report I just lodged:
"Problem:
1. Photos previously imported into earlier versions of Aperture 3.0, 3.01 are now said to be an earlier version and so have to be re-processed. This is stupid.
2. If I'm lucky enough to see an image in the viewer, after it has been loaded, re-processed and then processed, it is represented as a kaleidoscope of pretty blue, red, black and other colours. These aberrations obscure the entire image or parts of it. Further, if I scroll to the next image, it becomes a mosaic of the previous image and the image I have selected to view.
Feedback / Commentary:
These problems began after I upgraded to the latest release of SL (10.6.3) and Aperture (3.02).
As a loyal user of Macs for the past 10 years, and Aperture since Aperture 2.0 was released, my whole experience with the move to Aperture 3 has been an unmitigated disaster. It took far too much tinkering to get Aperture 3.01 working and as soon as I was happy, along came 3.02 and now I'm back to square one. In fact, when I think about it, its even worse. In fact even worse than anything I had to deal with in Aperture 2.
This is has been and continues to be a huge disappointment.
Having read the discussion fora, the best advice I have seen is that I revert to Aperture 3.01 and SL 10.6.2. Are you kidding? Downgrade my software? Is that the best advice to hand. This is a shallow farce!
What the **** is going on with you people?
Please find it within yourselves to dignify a dedicated user with some acknowledgement of this post, or better still a fix for this debacle.
Regards
Luke Cornelius
For the record, due to the incomplete options listed in the tick box form below, my system details are as follows:
Model Name: iMac
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed: 667 MHz
Boot ROM Version: IM61.0093.B07
SMC Version (system): 1.10f2
Graphics / Display:
NVIDIA GeForce 7300 GT:
Chipset Model: NVIDIA GeForce 7300 GT
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 128 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0395
Revision ID: 0x00a1
ROM Revision: 3021
Displays:
iMac:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Display Connector:
Status: No Display Connected"
Similar Messages
-
Aperture viewer issues after full screen view - in Browser, Split View and Viewer modes
2012 MacBook Air, Mac OS 10.8.2, Aperture 3.4.3. Everything is up to date and, as usual, has been working just fine since the last update a few weeks ago. Full screen view never caused any issues... until today.
I tried quitting and restarting Aperture. Using another Aperture library. Quitting everything and restarting my MBA... same behavior.
I went into the full screen view, edited a photo and got out of the full screen view to export it.
All of the sudden, only one line of thumbnails was showing up in my Broswer view (out of 380 pictures in that project). Looking closely at it, it seems like the Aperture now thinks that the desktop area it has to work with (the dark gray area where the thumbnails are) is larger than the aperture window because a part of photo is showing up cut off at the right edge and no slider at the bottom:
(note: at the bottom it says 380 items displayed)
Going back to full screen view, everything looks and works as nothing has happened:
In Broswer view, if I scroll down such that the first row is out of the view, the second row of thumbnails shows up:
Now, if I scroll back up, two rows of thumbnails are shown in the viewer:
To get the third row to show up, I need to scroll down to get the top two rows out of the way and so on.
At some point I saw this weirdo but have not been able to replicate it:
Split View also has its issues - the photo itself is no longer centered and the slider at the bottom gets out of the way past the right edge of the Aperture window before reaching the end of the row of thumbnails:
Finally, when double clicking the photo in the Split View to view it by itself, once again it is not centered and cut off on the right side but there is no slider...
Any ideas? I tried looking through the Viewer-related threads on here and did not see anything close to this. Is there a way to contact Apple support? I found some form somewhere on the website, but it had a dropdown for operating system and nothing past 10.7.2 so I am guessing it is not being maintained...
edit: added the note under the first imageWhen the graphical user interface is misbehaving, it frequently helps to remove the Aperture preferences apple.com.Aperture.plist from your user library, see the Aperture 3: Troubleshooting Basics on how to do this.
Regards
Léonie -
Edit the hyperlink in the alert email (Modify my alert settings, View Issue Tracking)
is it possible to add the external hyperlink in these emails instead of the internal hyperlink?
in example when I get a list tracking email there are hyperlink that get sent out with these tags Modify my alert settings | View Issue Tracking | mobile view that use the internal url //servername how can I change it to use the external
address //internetnameHi Joe, check out the following links for solutions:
http://sharepoint.stackexchange.com/questions/13216/how-to-create-custom-email-alert-template-in-sharepoint-2010
https://social.technet.microsoft.com/forums/sharepoint/en-US/e5ebc5a7-8295-49e4-a817-c31066e1ac3d/customize-the-sharepoint-2010-email-alert
http://www.alectang.com/blog/archive/2012/05/16/how-to-customise-sharepoint-alert-email-template.aspx
cameron rautmann -
Viewing issues with Adobe Acrobat Professional 8
We have Adobe Acrobat Professional 8 installed, and we are having some issues when viewing pdf documents. Once a Word document is converted to a pdf document, some of the hyperlinks are appearing thicker (almost bold) than others, and some of the text appears lighter/darker than the rest of the text. There is no pattern to this, it is all very random.
When we print the pdf document, everything looks correct, so this only happening when we view the document on the computer.
Can anyone provide a suggestion on how to fix this issue?
Thanks!Sorry, I forgot the attachment!
Hi Bill,
I am attaching screen shots of 1) a page where the hyperlinks appear thicker and 2) the document properties pages showing the fonts.
We have tried creating it with both the Adobe PDF Maker and the MS PDF tool and it happens using both. I am thinking that this really is a viewing issue, because it prints out fine. Also, it looks the same no matter what the zoom setting is.
Please let me know if you have any other advice.
Thank you!
Cari -
Aperture 3 Issues: "Apple" Raw Preset Override, Viewing, + Flickr
I have created a RAW preset for my Canon camera and asked Aperture to save it as my default. However, each time I load aperture, the "Apple" preset overrides my specific RAW camera preset. For some reason, the default "Apple" preset maxes out the boost.
Also, hitting the "v" key to change views is behaving erratically. The Inspector/Image view will simply not be in the cycle sometimes. I have also experienced my RAW files flickering when changing views, resulting in CPU overload.
And just some final comments: I'm glad to see Flickr integration, but more options would be nice. I'd like to be able to delete the aperture/flickr project without it actually deleting my flickr set.
Thanks for any help...
Jacobi have the same issue..the raw preset does not stick....
-
Dear members:
After some disappointments with the latest version of Bridge (CS3) I decided to start working with Aperture as I found it offered some interesting tools for viewing and selecting images.
First I worked on some test images and everything went well. However, last night I did my first import of "real world" images and experienced severe performance issues.
I imported one folder containing 163 photos to two different locations - the folder and the images were the same but imported into two separate locations in Aperture as I was trying to create the ideal file structure for me.
These are the questions and/or problems I have.
1. This IS NOT a major problem. As much as I tried to import photos into an album or folder I couldn't do it. I don't like the project concept and prefer to have my images placed into folders or albums. My iPhoto library was imported by Aperture using this structure. The iPhoto library is a folder with albums as subdivisions as they were set up in iPhoto originally. However, this doesn't seem to be working as I import photos from other locations.
Q: How can I import photos into folders or albums and completely avoid the projects concept and icons ?
2. This IS major problem. Performance was very poor. I imported the folders last night and waited for approximately 30 min until I decided to turn my computer off. Aperture gave me a message stating that it was still generating previews and asking me if I wanted to quit. I pressed the OK button and turned the computer off. This morning I launced Aperture again and it went back to the spinning wheel on both projects. It must have taken approximately 45 min until the spinning wheels were no longer turning.
This is a problem for me as I have a library with approximately 15,000 - 20,000 images. The ones I imported last night were CR2 generated by a Canon 1Ds MK II (17 MB each). I can only imagine how long it would have taken had I chosen to import the 120+ MB TIFF images I also have in my library from slide scans.
My Aperture preferences have been set for Preview Quality = 12 and Limit Preview Size = Don't Limit. I have it set this way as I don't with to have reduced size previews so that (1) they can display with the highest possible quality as I mostly use the full screen mode for viewing and selecting images, and (2) in case I upgrade to a larger monitor in the near future (I have a 23" cinema display but am planning to upgrade to a 30") the previews will still work with that monitor.
Is this performace typical of Aperture ? I understand my camera is a professional camera that generates large images but isn't Aperture supposed to be a professional application aimed at professional photographers ? And what about those who work with 39 MB images from a Hasselblad or with scanned 120+ MB slide images ?
Is there something obvious I have forgotten to look at or set up in Aperture ?
Thank you in advance,
Joseph ChamberlainSteve:
Thank you very much for your reply to my post and for your suggestions. Some comments about my experience appear below. I am grateful for your help and don't wish in any way to discuss what you recommend below. I just wish to share my view of this issue and also to try to find the best answers for my problem.
For 1, use File > Import > Folders Into A Project. That will retain your folder
structure using brown folders and albums.
See:
http://www.bagelturf.com/aparticles/library/fivesimple/index.html and
http://www.bagelturf.com/aparticles/library/brown/index.html and
http://www.bagelturf.com/aparticles/library/libinadv/index.html
A. You can't. Projects are the container for everything in Aperture. No
projects, no images. So just live with them and subnvert them any way you
like. I don't have "projects" so I just use months, vacations, events, or
whatever keeps my image collections a reasonable size.
As an user I would like to have control over my own filing structure. This works quite well in iPhoto and I don't understand why Aperture chose to adopt this less flexible file structure. Also I noticed that the imported iPhoto library appears in Aperture inside a folder with multiple albums. Since Aperture can do this for iPhoto I find it hard to understand why it can't do for other imported images.
2. Turn off previews and delete the ones you have. When you find you need > them, use them selectively:
http://www.bagelturf.com/aparticles/previews/pwho/index.html
As stated in my previous post I always (no exception) use the full screen mode for viewing my images which is similar to a slide show. So according to the web page you reference above I would fall under the category of users that need previews.
You don't need high res previews. Aperture already generates thumbnails
for you.
General speed tips:
* Get the best video card with the most RAM you can afford
I can't. My computer is fairly new as it was purchased a little more than 2 years ago. Although it is a fairly new computer Apple no longer offers parts for it. My video card is an ATI Radeon 9600 Pro with 64 MB of VRAM installed. I have contacted Apple about this issue and they tell me there is nothing they can do. I have also contacted both ATI Radeon and nVidia and both have discontinued the only two cards they would work in my system (X800 XT Mac Edition and GeForce 6800, respectively).
* Smaller screens are faster than larger screens
My screen is 23" which I would consider to be a medium size screen by today's standards. However, isn't the purpose of working with Aperture to be able to develop a professional workflow ? And don't most professionals like to use large screens to view their work ?
* Avoid H&S adjustments until all the others are done
* Make sure you have sufficient RAM (2G minimum, 3G on a Mac Pro)
My system has 2.5 GB RAM installed. It has been suggested to me that I should add another 1 or 2 GB RAM as it would improve performance significantly. I have no problem doing that and would welcome that solution if I knew for a fact it was going to address my issues. However, I have already invested too much on hardware and software while still finding myself struggling with the issues I have described. Do you think the additional RAM would solve the problem ?
* Don't use previews unless you need them
Based on what I have read on the pages you referenced it seems to me I am one of those users who needs previews.
* Keep projects small. Use blue folders to group projects
My current filing structure is simple - I four folders each with subfolders containing in average 200 to 1000 images each. Some have as little as 1 image and some have 1000. But the majority would fall in the 300 to 400 images range.
* Rebuild the database once in a while
* Quit other apps if memory is restrictive
It seems in this case that the RAM upgrade I mention above would be helpful. Would it allow me to run other applications while also running Aperture without any noticeable performance alteration ?
To a great extent you have to rethink your workflow once you use Aperture.
Many people do a lot of unnecessary things because they are coming from
an environment that forced them to. Start from scratch and ask yourself
why you do everything you do. Much of the effort you will find is wasted
because Aperture either does it for you or make it unnecessary.
I am trying to simply my workflow as much as I can but not at the expense of quality. Bridge CS2 did a very good job for me. In many ways it was the perfect application althout it didn't have many of the great features I find in Aperture for reviewing and selecting images. First it was simple - all you had to do was to create your own file structure and then point Bridge to the folders as it would create its own previews. Second it was fast - this process happened a lot faster compared to Aperture and Bridge CS3. Third it was high quality - the previews generated were high quality and could be seen with amazing resolution while in slide show viewing mode on my 23" screen. My upgrade to Bridge CS3 was disastrous as (1) it has many bugs Adobe hasn't taken the time to fix, (2) it is slow on average machines requiring the latest hardware to run efficiently which is unrealistic for most consumers and (3) the previews generated are soft and appear pixilated and in poor quality while in slide show view.
I am going back to Aperture after a very disappointing start as I was one of the very first to purchase the software as soon as it was introduced only to be frustrated with all of its bugs and design flaws. Aperture has one of the best interfaces I have seen on any imaging application and I would really like to use but after this new attempt to use and the barriers I have encountered I am not sure I can.
Joseph Chamberlain -
Hi all,
I'm experiencing some aliasing/jaggies artifacts with certain images displayed at less than 50% zoom in Aperture 3. It's very noticeable in split-view and viewer only mode, and is still quite noticeable in full-screen mode. There is no aliasing apparent when the image is zoomed in to 100%. Wasn't 3.1 update supposed to fix this exact issue?
From the update notes: "Rendering of images scaled to below 100% in Viewer"
Here are some screen grabs (focus on the rail):
*Split view*
*Viewer only*
*50% zoom*
Is anyone else experiencing this?
Thanks in advance!Would love to know if there is a fix/workaround for this issue.
Thanks! -
version 12.1.2
I have a list view with 2 rows, 2 columns. column sizes are ( c1 = 85% and c2 = 15 %). C1 displays table data, and c2 has a button on each row, which takes me to different page.
When I click the button I am expecting it to take me to the next page. But for some reason I have to click the button twice to go to the next page. When I click the first time, it only highlights the
row, then when I click the second time, it takes m to the next page. Is there any special settings I need to change for a list view?
First I tried implementing row double click by using client/server listeners to take me to the next page, it showed the same behavior (had to double click twice to go to next page). So I thought it might have something to
do with the client/server listeners not working correctly. So switched to using button to go to next page and I am still seeing the same behavior. Here is my code, I would greatly appreciate any help.
<af:listView value="#{bindings.emp1.collectionModel}" var="item"
emptyText="#{bindings.emp1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.emp1.rangeSize}" id="lv1"
partialTriggers="::b6" selection="single" immediate="true"
binding="#{SomeBean.empListView}">
<af:listItem id="li1">
<af:panelGridLayout id="pgl3">
<af:gridRow marginTop="5px" height="auto" id="gr1">
<af:gridCell marginStart="5px" width="85%" id="gc1">
<af:outputFormatted value="#{item.bindings.empId.inputValue}"
id="of1"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empID}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px"
id="gc2">
<af:button id="b4" icon="#{resource['images:add_ovr.png']}"
action="callEditFlow" rendered="true"
visible="true"/>
</af:gridCell>
</af:gridRow>
<af:gridRow marginTop="5px" height="auto" marginBottom="5px" id="gr2">
<af:gridCell marginStart="5px" width="85%" id="gc3">
<af:outputFormatted value="#{item.bindings.empName.inputValue}"
id="of2"
inlineStyle="font-family:Verdana, Arial, Helvetica, sans-serif; font-size:small;"
binding="#{MouseDoubleClickBean.empName}"/>
</af:gridCell>
<af:gridCell marginStart="5px" width="15%" marginEnd="5px" id="gc4"/>
</af:gridRow>
<af:clientListener method="doMouseDblClick" type="dblClick"/>
<af:serverListener type="CopyEmp"
method="#{MouseDoubleClickBean.copyEmpDetails}"/>
</af:panelGridLayout>
</af:listItem>
</af:listView>
<af:resource type="javascript">
function doMouseDblClick(evt) {
var btn = evt.getSource();
AdfCustomEvent.queue(btn, "CopyEmp",{},true);
evt.cancel();
</af:resource>
Thanks.Hi,
can you try af:commandButton to see if it is a problem with af;button. If this doesn't work then it appears that there is an issue with the focus setting preventing the action to come through. A work around in this case would be to override the SelectionListener on the vlieView component and to queue the command button action (the downside is that each time you select a row it will navigate (which means you could set the button display to hidden).
I suggest to file a bug with support. If you don't have a support contract, please zip up a simple test case based on the HR schema and send it to frank <dot> nimphius < at > oracle <dot> com (replace the <dot> with . and <at> with @). The testcase should be zipped and renamed to ".unzip" as the extension
Frank -
OBIEE 11g Map View - Issue with Label Translation
Hi All,
I have a strange translation issue with the Maps in 11g.
Created in English language to plot the Revenue for each of the Postal Codes.
I selected Postal Code and Revenue Amount in the Criteria and created a new Map View. It had the text 'Postal Code' in the Map Legend and then the scale for revenue amount.
Now I logged on with Chinese Language , it still appears as 'Postal Code' in English where in it was actually supposed to show it in Chinese.
We have a translation pack to get all the column names translated. If I try creating a new table view, it shows the translated text instead of 'Postal Code', but some how this doesn't work with Maps.
Has anyone faced similar issues ? Is there a workaround for this ?
Thanks for any pointers.Hi,
I also encounter the same issue. When I view combined layout, I get the No Results message. But when I edit the table layout, I see that there are records returned. Does anyone had any luck in resolving this issue?
Thanks! -
Copying file from a Compact Flash Card or Epson Picture Viewer issues
I am a photographer and have been experiencing issues when trying to copy or move files from my compact flash cards or my viewer HD device. Both my Sandisk reader and the epson connect to my iMac through USB (rear ports) and during the copy process, I get messages that one of the files are in use, and the rest of the copy is aborted. Since the copy process doesn't work in a numerical or filename fashion, I have to look through each file that has been copied and try to identify which files were missed. The weird thing is that if I try to copy the file that was mentioned in use, it works fine
I am copying to a USB External drive, connected to my Airport Extreme. I've encountered the same things when the HD was connected directly to the iMac.
I am getting very frustrated with this process, and am looking for insight on how to make this go away, or at the very least, is there an application that will copy/move and verify the files before exiting? I can't help but think that I may have missed files here and there, and those files could be now lost memories.
Any help would be appreciatedThey'll record either while simutaniously recording to tape. I believe the HDV is in a .M2t format but I'm not sure about the DV file format. As for quality, your guess is as good as mine, I haven't had the chance to play with one yet.
Mike
M2 Digital Post Inc.
San Diego, CA. -
Hi All,
I'm facing a problem in Viewer. Whenever I customize the report(change graph style or change rows retrieval or drill up/down) , Drill Through to other reports through links are giving an error-
Warning
Do you want to save your changes before closing this worksheet?
You have not saved the changes you made to this worksheet. This worksheet must be closed to continue. Click "Yes" to save changes and continue, "No" to continue without saving changes, or "Cancel" to return to this worksheet. If you choose "Yes" and you do not own the workbook, you will be prompted to save it under a new name.
AND NEXT ON CLICKING YES/NO
Error
An error occurred while handling the event. See the application log for more details.
A fatal application error has occurred. Please consult with your OracleAS administrator or look at the application log file.
This is happening only with Viewer, in my Plus all the links , drill up , drill down are perfectly fine.
Please help me how i solve this problem.
(URGENT)
ThanksI have got the same issue
and the log file 10.1.2/j2ee/OC4J_BI_Forms/application-deployments/discoverer/OC4J_BI_Forms_default_island_1/application.log tells
09/07/03 09:31:01 discoverer: [ERROR] [Discoverer Viewer BG Worker 18] oracle.discoverer.applications.framework.Applicat
ionController._logException error.bean.delegation.failed
oracle.discoverer.applications.viewer.controllers.ControllerException: error.bean.delegation.failed
at oracle.discoverer.applications.viewer.controllers.GridController.delegateToBean(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.GridController.handleBi_drill2(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at oracle.discoverer.applications.framework.RequestProcessor.execute(Unknown Source)
at oracle.discoverer.applications.framework.WorkerThread.run(Unknown Source)
at java.lang.Thread.run(Thread.java:568)
Caused by: oracle.discoiv.beans.ServerLostException: Contact with backend server lost
at oracle.discoiv.beans.proxy.server.DiscovererServer.lostMiddleTier(DiscovererServer.java(Inlined Compiled Code
at oracle.discoiv.beans.proxy.server.DiscovererServer.getPunchThroughDataProviderResultSet(DiscovererServer.java
(Compiled Code))
at oracle.discoiv.beans.proxy.DataProxy.getDataProviderResultSet(DataProxy.java(Compiled Code))
at oracle.discoiv.beans.Data.getDataProviderResultSet(Data.java:69)
at oracle.disco.bibeans.beans.BeansDataDirector.setResults(BeansDataDirector.java:206)
at oracle.disco.bibeans.DiscoDataSource.notifyListenersIfDataAvailable(DiscoDataSource.java:1059)
at oracle.discoverer.applications.viewer.model.QueryModel.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerModelImpl.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.ViewerController.notifyListenersDataAvailable(Unknown Sourc
e)
at oracle.discoverer.applications.viewer.controllers.ViewerController.executeQuery(Unknown Source)
... 10 more
Caused by: DiscoNetworkException java.net.ConnectException: Connection refused:host=eulxrxfr,port=34571 - Nested excepti
on: org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused:host=eulxrxfr,port=34571 vmcid: IBM minor c
ode: E02 completed: No
at oracle.disco.model.corbaserver.serverrequest.DsrGeneralCorbaXML.updateServer(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl._nonReentrantExecute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.ExecuteEngineImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.execengine.SessionControllerImpl.execute(Unknown Source)
at oracle.disco.model.corbaserver.Discoverer.closeActiveWorkbook(Unknown Source)
at oracle.disco.model.corbaserver.SessionImpl.closeActiveWorkbook(Unknown Source)
at oracle.disco.model.corbaserver.WorkbookImpl.closeWorkbook(Unknown Source)
at oracle.discoiv.session.model.ModelWorkbook.closeWorkbook(ModelWorkbook.java:234)
at oracle.discoiv.session.model.ModelEul.closeWorkbook(ModelEul.java:269)
at oracle.discoiv.state.CloseWorkbookTransition.doTransition(CloseWorkbookTransition.java:37)
at oracle.discoiv.state.ResetDrillTransition.doTransition(ResetDrillTransition.java:40)
at oracle.discoiv.state.StateTransition.moveToEndState(StateTransition.java(Compiled Code))
at oracle.discoiv.state.DiscoState.applyTransitionsAndCommands(DiscoState.java:132)
at oracle.discoiv.state.BlockingStateMachine.moveStateToDataSpecification(BlockingStateMachine.java:119)
at oracle.discoiv.state.BlockingStateMachine.processDataSpecification(BlockingStateMachine.java:72)
at oracle.discoiv.controller.discoslow.DiscoSlowRequest.executeSlowRequest(DiscoSlowRequest.java:61)
at oracle.discoiv.util.slow.Worker._execute(Worker.java:132)
at oracle.discoiv.util.slow.Worker.run(Worker.java:109)
... 1 more
09/07/03 09:31:02 discoverer: [ERROR] [Discoverer Viewer BG Worker 19] oracle.discoverer.applications.framework.Applicat
ionController._logException error.invalid.state
oracle.discoverer.applications.framework.ApplicationException: error.invalid.state
at oracle.discoverer.applications.framework.RequestProcessor.execute(Unknown Source)
at oracle.discoverer.applications.framework.WorkerThread.run(Unknown Source)
at java.lang.Thread.run(Thread.java:568)
Caused by: oracle.discoiv.beans.SessionClosedException: Session closed
at oracle.discoiv.beans.proxy.server.DiscovererServer.checkSessionActive(DiscovererServer.java(Inlined Compiled
Code))
at oracle.discoiv.beans.proxy.server.DiscovererServer.getPunchThroughDataProviderResultSet(DiscovererServer.java
(Compiled Code))
at oracle.discoiv.beans.proxy.DataProxy.getDataProviderResultSet(DataProxy.java(Compiled Code))
at oracle.discoiv.beans.Data.getDataProviderResultSet(Data.java:69)
at oracle.disco.bibeans.beans.BeansDataDirector.setResults(BeansDataDirector.java:206)
at oracle.disco.bibeans.DiscoDataSource.notifyListenersIfDataAvailable(DiscoDataSource.java:1059)
at oracle.discoverer.applications.viewer.model.QueryModel.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.model.ViewerModelImpl.notifyDataListeners(Unknown Source)
at oracle.discoverer.applications.viewer.controllers.ViewerController.notifyListenersDataAvailable(Unknown Sourc
e)
at oracle.discoverer.applications.viewer.controllers.GridController.handleDisplayData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
... 3 more
09/07/03 09:31:02 discoverer: [ERROR] [AJPRequestHandler-ApplicationServerThread-10] oracle.discoverer.applications.fram
ework.ApplicationController._logException error.viewer.data.missing
oracle.discoverer.applications.viewer.view.dataprovider.DataProviderException: error.viewer.data.missing
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.<init>(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.retrieveModelData(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.BaseProxy.retrieveModelData(Unknown Source)
at oracle.discoverer.applications.viewer.view.dataprovider.ErrorProxy.retrieveErrorData(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code))
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code))
at java.lang.reflect.Method.invoke(Method.java(Compiled Code))
at oracle.cabo.servlet.event.MethodEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.invoke(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forward(ServletRequestDispatcher.java:222)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at javax.servlet.http.HttpServlet.service(HttpServlet.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.
doFilter(ResourceFilterChain.java(Compiled Code))
at oracle.discoverer.applications.framework.ApplicationEncodingFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.invoke(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispat
cher.forwardInternal(ServletRequestDispatcher.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.HttpRequestHandler.p
rocessRequest(HttpRequestHandler.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.ru
n(AJPRequestHandler.java(Compiled Code))
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.AJPRequestHandler.ru
n(AJPRequestHandler.java:133)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].util.ReleasableResourcePooledExe
cutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:568) -
Color Looks Different in Aperture Viewer Compared to Full Screen
The color in my photos looks different depending on how I view them. In Aperture's Viewer and in Photoshop Elements 6, it looks what I consider to be normal. In Aperture's Full Screen view, and in other applications such as Preview and Safari, the colors look super-saturated: much more vibrant than in real life.
The photos were imported into Aperture as JPEGs, directly from my camera. Previews are turned off in Aperture, and I have it set to export using sRGB. I'm using an external Dell display that's been calibrated with Spyder2 Express. Turning on Onscreen Proofing in Aperture (and trying different profiles) doesn't seem to change the display in the Viewer at all.
How can I make the color in the Viewer match the color in other applications? It's hard to edit when I can't accurately see what I'm doing.Thanks for the quick and helpful reply! I didn't know there was such a thing as a default display, but after setting that to the external the photos look good again.
I guess I wasn't using the right search terms, but after reading your reply I was able to find this huge thread:
http://discussions.apple.com/thread.jspa?threadID=1394928&start=0&tstart=0
It seems to me that this is an OS bug, because the images were displaying incorrectly in Preview, Safari, etc. Each display has been calibrated and has a ColorSync profile, and the OS knows which display the window is on, so it should be able to figure out which profile to use. -
GRC 10.1 Simplified Access Request and Remediation View Issues
Hi Everyone,
We recently upgraded our GRC 10.0 environment to 10.1, SP 5 and am having the following issues--has anyone else also experienced?
In the simplified access request form, it keeps telling me to enter a “valid user ID”—even though the ID is valid and works fine in the normal access request screen. Also tried to search and then select the ID in this field with the same error.
In the SoD Remediation view, I keep getting “No Data Found”, even though in the detail view, there are risks the same request:
I’ve checked the following things:
I’ve used IE 8, IE 9, FireFox, Chrome, and the NWBC to see if any of these fix the issue
I double checked the 10.1 “upgrade guide” to make sure Gateway configurations are correct
It looks like we are on the latest support packs:
Any help on this would be greatly appreciated!
Thanks,
BrettHi Brett,
For Remediation issue you can check the below thread.
http://scn.sap.com/thread/3574790
Regards,
Neeraj -
when i opened the photo viewer to view photos, it takes more time to load (the loading symbol is rotating for more than minute).This was not the actual opening time before.If i try to exit the viewer, i couldn't,the display is switched off for a while,then i pressed menu key to minimise the application and closed it.
Also i locked the screen using the slider key.but i couldn't unlock the screen using slider key.
does anyone experience the same issue?
Solved!
Go to Solution.For all those having that "black screen" problem, here's an excerpt from the PR 1.1 changelog:
Images and Camera
* 4053 Confusing behaviour when saving to a file that matches an existing directory
* 6194 Shutter release button does not always work
* 6372 Sometimes photos are not deleted if you delete directly after taking them
* 7060 Sometimes photos are very green
* 7160 Camera app hardcodes and requires FAT partition
* 7394 Some photos are missing EXIF DateTimeOriginal data
* 7758 Daily image counter in photo filenames not incrementing in some cases
* 8087 Photo autorotation issue
* 8310 Image Viewer shows only black screen
* 8698 camera does not have the night mode function
* 8877 Volume buttons should work in camera window when lens cover is not opened
So try PR 1.1. -
Thumbnail view issues in PSE 10.
Hello, new member here.
I can't view RAW thumbnails when I go into the open dialog (not organizer) just regular file/open in PSE10. (win 7 x64). (Sony alpha 33)
Is there a cache issue?
Can I clear it?
I can see a preview of the file on the bottom of the window, but no thumbnails.
Thanks in advance.
edit:
.jpg images from wither the same camera or another camera display fine.
Message was edited by: tubeydudeHi Neale,
Thanks for the reply. I really appreciate it.
I tried that and now I see a generic image of an ocean and mountain behind. Previously, (before the sony raw driver) was just an icon that looked like a file folder with "ARW" in big letters. That is gone now and replaced by the image mentioned.
Thanks again.
Erik
Maybe you are looking for
-
I'm totally new to iphone/ipod. I need help with the following: 1) How do I get rid of a folder of photos that showed up on my daughter's ipod touch when she received some songs from her aunt's itunes? After she got some songs from that itunes a fo
-
Error while installing j2sdk-1_4_2_08-windows-i586-p
when I tried to install j2sdk-1_4_2_08-windows-i586-p by running the installer j2sdk-1_4_2_08-windows-i586-p.exe, a massage box displayed with this error: Java(TM) Update (1.4.2_08-b03) can not be installed on this machine because the Java(TM) virtua
-
Dynamic query to produce crosstab/pivot report
Hello, I've not been able to find any examples similar to my situation but perhaps I'm using the wrong search phrases... I'm basically trying to create a cross-tab type report based on a dynamic query (since I do not know how many accounts a person h
-
Adobe LiveCycle ES3 Installation issue
Hi, We are facing an issue withnES3 Installation with disabling UAC. Our corporate security policies dont recommend to disable UAC on servers, We have to keep it enabled. We are unable to proceed further with this issue. Is there a way to overcome th
-
Submitting form to multiple recipients
Is it possible to have a form, that when completed by a staff member, is emailed individually to the entire board of directors (for grant approval). This is NOT a question of distributing a form, but of having the form automatically emailed to a list