Aperture 3 with Nikon D90 - How should raw fine tuning look like?

I try to trouble shoot my Aperture 3 (trial) installation. I have some troubles with the raw fine tuning controls and after reading the manual (again) I noticed that the fine tuning controls I get for my D90 are different from the ones displayed in the manual.
I get boost, hue boost / sharpening, edges / moire, radius, noise-reduction sliders.
In the manual there is no noise-reduction slider, just a check box for Auto Noise Compensation.
I got that control in Aperture 2, but not in Aperture 3. Now I’m wondering if something went wrong with my Aperture 3 installation. That would explain the problems I have with raw fine tuning. But before I try a complete clean install of my Mac i would like to know if I get the right raw fine tuning controls in Aperture 3.
Does anybody use Aperture 3 and a Nikon D90 and could tell me how the raw fine tuning controls he gets in Aperture 3 look like?
Thanks.

Greetings, First be sure you have your d7100 properly set to take maximum detail NEF images.
Go to your d7100 shooting menu and choose NEF (Raw) recording > Type
Choose N Lossless Compressed
Then go to NEF (RAW) Recording > NEF (RAW) Bit depth
Choose 14 bits
You were given good advice that you should not mess with the raw fine tuning brick in Aperture 3.6
Your d7100 has a default RAW import preset - make sure you have somehow not changed that Apple Aperture coded
raw fine tuning preset - this could make all your images far less sharp on import. You can easily revert to the Aperture 3.6 raw import brick default for the d7100 if you have somehow changed it by error. And always be sure to use your Aperture loupe or full screen viewer when applying any adjustment bricks.
Finally be sure that you understand the differences between the Sharpen adjustment and the Edge Sharpen adjustment. Both of these are very sensitive and very different sharpening tools. I do not shoot with a d7100, but use other Nikon FX DSLR's and I have never felt that any of my NEF imports lacked either Sharpness or Edge Sharpness given the Apple Aperture default raw image digital converters for each particular Nikon body. Good luck.

Similar Messages

  • Aperture 2.1 doesn't lift Raw Fine Tuning for Canon 40D

    Anyone know what's going on here. I can lift all adjustments including raw fine tuning with all my cameras (Canon 1D Mark III; 1Ds Mark III; Mark IIN) except for the 40D. For some reason when I click the Lift button on 40D images the Raw Fine Tuning option in the lift hud doesn't appear. Only Adjustments, Main Rating, IPTC and Custom. I've tried quitting Aperture and restarting. I've also tried rebooting. Problem persists.

    First, make sure that you are using full RAW files not RAWs. RAW s is a smaller size setting in the camera which has not been supported by Aperture in the past. Second, try rebuilding your Aperture database. I have a Canon 7d and use RAW. It works fine on my system. You can try reinstallation but if your problem is the RAW version or your database, reinstallation will not address the problem.

  • RAW Fine Tuning Engine with 5D mark II  - Aperture 3

    When comparing the raw fine tuning engine btw AP3 and AP2, I noticed that there are different...I have the feeling the settings on AP3 are too strong
    Anyone noticed the same ?
    Thanks
    Vadim

    Oh I see. Can't comment any further then since I don't own a 5D mk2.
    But FWIW my D700 files are not that much different.

  • Understanding Aperture's RAW fine tuning ?

    Dear Aperture Experts,
    I have been trying to familiarize myself with the RAW fine tuning brick for a while based on both the manual and internet research. However, I feel I still do not sufficiently understand its functioning and even have more questions now. I have grouped them in two categories below and would very much appreciate any skilled comments.
    I use Aperture 3.4.4 under OS 10.8.3 with Digital Camera RAW Compatibility Update 4.05.
    Many thanks in advance !
    Philippe
    A) Overall usage of the RAW fine tuning brick
    Under which circumstances do you tweak Apple's default settings at all? I have seen people advocating they never ever change anything here stating it would be almost impossible to achieve any better result compared with the default, whereas others claim the very first thing they do for each and every picture is adjusting the raw decoding parameters, this being the whole gist of using a RAW workflow.
    It appears that except for the moiré/radius settings there are adjustment bricks that can achieve similar processing as the  other RAW fine tuning parameters. Under which circumstances would it then be preferable to use the RAW parameters rather then a corresponding adjustment?
    Apple's default decoding settings are dynamic in the sense that its not just a fixed set of parameters applied to every image. Rather, I could observe that at least two different De-noise settings are applied (with my Canon EOS 7D) depending on the ISO speed: 0 up to ISO 1600 and 0.1 for 3200 and higher ISO speeds. 2a) Are there other parameters that are dynamically changed according to image properties?  2b) Is there a way to keep this dynamic behavior in self-defined presets for parameters that have not been touched, e.g. keeping ISO depending de-noise while using a lower hue boost value? Note that on the opposite it appears impossible to save a preset without changing at least one parameter from the Apple default. This means that you cannot automatically (e.g. at import) apply a static (rather than dynamically changing e.g. according to ISO) set of parameters being identical Apples's default. Strange.
    Is there a way to automatically apply different sets of RAW fine tuning presets according to image properties at import time? I know there is the possibility to trigger an applescript subsequent to an import process. Based on this I understand  one could apply different adjustment presets therein, but I don't think this applies to RAW decoding presets as well.
    B) Individual RAW fine tuning parameters
    I think I understand boost/hue boost. No question here
    At first glance, sharpening is clear as well. However, I do not really understand how this parameter interrelates with the  associated details slider (which used to be an "edge" slider in previous versions, suggesting a different function). When should I tweak one rather then the other? It appears that for my camera those two parameters are always set to 0 in Apple's default. I cannot believe no sharpening is required at all.
    I understand that moiré/radius work together, but do they interact with De-noise (which is located in the same section), or is the latter independent from the former pair?
    Can the moiré parameter pair be used to reduce chroma noise? I did not succeed at it, the only effect I observed was a hue change in some areas. Does it mean this slider (pair) is restricted to eliminating color fringes along edges in repeating small sized patterns?

    That's true, because i've exported the images from my Aperture Library to my desktop (original JPEG settings from Aperture), and at that time i maked the snapshot of the EXIF, but here is the EXIF FROM APERTURE::
    http://www.ldbproduction.nl/EXIF_Aperture.jpg
    There are what changes in the RAW and JPEG:
    So is the pixel size different, the color Depth by JPG is 8 bit and by the CR2(RAW) file is it 16 bit.
    And the most stranged thing i see now is that the JPG version is using the sRGB-profile and the RAW used the Adobe RGB (1998), i realy don't know how to handle that in the camera! There is only one choice to make.

  • Customising the RAW fine tuning as default for importing. In Aperture 3

    RAW Fine Tuning.
    I use a Canon G11 PowerShot camera.
    I’m being unsuccessful customising the RAW fine tuning as default for importing new files, so each new RAW file imported come into Aperture 3 with the changes from the Apple default.
    All I want to do is: reduct the boost from 1.0 to 0.5 and Hue Boost from 1.0 to 0.5.
    I made the said changes by moving the sliders.
    Then from the cog wheel (in RAW fine tuning) click on save as preset ( give it a name )
    I now see it in the list , I click on it - click save as camera default - it now say camera default next to my custom settings.
    However when I import new RAW files into Aperture 3, it imports the file with the Apple settings not my custom settings that are marked with camera default.
    NB, I had not problem changing the above in Aperture 2 - I have done it before and I believe I have gone through the procedure correctly
    Can anyone please help
    Thanks Martin

    Hi Matthew
    What I'm doing is: setting the RAW fine tuning camera default ( to my custom settings) , so all new files being imported into Aperture 3 will take my custom settings as they are imported into Aperture 3.
    I did this will Aperture 2 without any trouble . now I have upgraded to Aperture 3 the RAW fine tuning camera default is Apples and I have to change it from Apples to my custom preset.
    It shows I have changed the RAW camera default to my custom settings in the drop down list but when I import files - they take the Apple preset not my custom settings ? ?
    Martin

  • Aperture 3.1.2 Raw fine tuning

    Started to use manual control on my canon 60D.  After importing the RAW files into aperture 3.1.2, the RAW fine tuning controls (except for boost and hue boost) are greyed out and not selectable.  Is this normal?  The controls work fine with other settings on the camera (Av, Tv, etc.).  Thanks!

    Actually, looks like the sliders are greyed out on all settings, manual, Av, and Tv??  This just happened recently and I don't think there was an update.  I rebuilt the database already.  Any suggestions?
    Thanks!

  • I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

    I have a canon 7d and my aperture version 3.4.5 is not recognizing the raw format? The Can not review any raw photo in the adjustments/raw fine tuning controls.

    When i click on the adjustments everything is grayed out and the messages states " Image Not Found'.
    Are you seeing broken arrows or yellow warning triangles, when you enable badge overlays?
    That looks, like your original image files were missing.  Are your images referenced or managed?
    Create a smart album with the rules "Files status is missing" or "Files status is offline". This will show you any images, where the original raw files cannot be found.

  • De-Noise setting with custom RAW fine-tuning ?

    If I look at the De-Noise setting when using the Apple default you will notice that it varies with the ISO of the image (Njikon D4). As the ISO increases so does the De-Noise setting. This is often a good thing. If I save my own RAW fine-tuning setting with out touching the De-Noise setting and make it the Default, the De-Noise setting is no longer 'active' and just sits at zero for all ISO settings.
    How do we create a custom preset that will automatically increase De-Noise when the images have a higher ISO?
    JO

    leonieDF wrote:
    How do they differ after the last update? Ithink my Canon EOS 5D Mark II images now need less boost than before.
    I have speculated elsewhere that software and camera manufacturers are pushing hotter and more "Disney-fied" defaults than they have in the past (and that these have always been "unreal").  My experience with a Sony a77 is that the newest RAW upgrade reverses (or calms) this trend.
    The Sony a77 default setting under Apple RAW Compatibility Update 3 was too saturated and too contrasted (locally and globally).  I pulled back Boost to 0.7 and Hue Boost to 0.6, and left the rest the unchanged.  Under RAW Compatibility Update 4.0, I don't have to make as big a change, and settled on Boost=0.93 and HueBoost=0.70.  I also tweaked the other settings -- the biggest change there was putting moire to zero.
    That said -- I am having significant repeatable color problems with my NEC wide-gamut PA271W monitor, so I am going to have to revisit these settings after I resolve that.  I made the new settings based on the Retina display and an NEC 2490WUXi2.  They produce images that look great.  I have not printed any yet, but getting matching prints has not been a problem in the past.
    Do you change any settings other than Boost and Hue Boost?

  • Frustration! I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen???

    I live in Japan,
    I have all igoods in order to use all, fully as should be. But looks like Softbank does no agree with any connection between iPhone and iMac... What in the world! How Apple let that happen??

    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    See also:
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *https://support.mozilla.org/kb/Images+or+animations+do+not+show

  • Noise reduction - RAW fine tuning and the Noise Reduction tool

    Hi,
    1- If I get it right, Aperture's RAW fine tuning "Automatic noise compensation" (translated from French) option uses the camera's information to adjust the noise. Is that correct?
    2- The Noise Reduction tool is there to provide additional noise reduction, but this makes you lose some details. Is that correct?
    3- How do you use them? I often find the Noise Reduction tool a bit overkill, but that's me.
    4- This one is just out of curiosity. How does A3 compare to LR3 beta for you in that regard? In my testing, LR3 did a slightly better job (but A3 totally beats the crap out of LR2 for noise). BUT I have an old D50, and newer cameras handle noise better (especially Nikon), so does it really make a difference for a 2008 or newer camera?
    Thanks!
    Manu

    Manusnake wrote:
    pilotguy74 wrote:
    I don't even have this option/checkbox in my Raw Fine Tuning brick.
    I wonder if it's due to the type of files (Canon 7D). Do you still have those 7D files I sent you? Does the checkbox appear in Raw Fine Tuning for you with them?
    I noticed this option in the manual the other day, but forgot about it until now.
    True, it doesn't have the checkbox with the 7D files. However, it as a slider "noise suppression" (again translated) in the RAW fine tuning options (and still has the Noise suppression brick).
    If you don't have this one too, have you reprocessed your images with Aperture 3? Since it has a new raw engine, it may be the cause of it.
    I find it strange that Apple didn't tout the new RAW engine on Aperture 3 new feature, it clearly is an improvement over Digital Camera RAW 2, especially in noise suppression.
    I agree the built-in noise suppression is much better than A2, but IMHO it pales in comparison with the Noise Ninja plugin from Picturecode. The key is that you calibrate a profile for Noise Ninja by shooting a color chart full screen on your computer at varying iso settings with each of your cameras. You then feed the images back in to Aperture, and tell Noise Ninja to create a noise profile for each setting. The results are amazingly good.
    Now with a lot of new cameras, noise processing is getting less important because the high iso performance is so good....but this is what makes Noise Ninja special...even when the noise adjustment is subtle, because it is working from a profile created with your camera, at the iso the shot was made at, its effects are seamless. They just announced a 64 bit plugin for Aperture 3, so no bouncing into 32 like other plugins at the moment...
    Sincerely,
    K.J. Doyle

  • RAW fine tuning 1.1?

    If I expand the RAW fine tuning, I get a setting menu that has "Apple" selected. There are setting for camera default and to save and clear the camera default but they are greyed out.
    Should this work? I can't find any documentation on it yet.

    Hi,
    It seems that some of the Raw Fine Tuning settings are greyed out depends on camera model. I noticed this with a nikon d1h and d1x. There are all options for images shot with the d1h but with the d1x the settings for chroma blur and sharpening are greyed out.
    I checked apples aperture raw page http://www.apple.com/aperture/raw/ and found a list of supported cameras. Cameras providing optimized support are marked with an asterisk. Both D1X and D1H are marked but have different settings available. Maybe this is a bug.
    What about your experiences?
    Regards,
    Eberhard

  • Latest batch of RAW files has all the raw fine tuning options greyed out

    I shoot about 1000 images a week with my 40d and edit/organize all of them in Aperture... the latest batch (a pretty important batch at that) of 800 or so imported fine but does not allow me to use the 'Raw Fine Tuning' options as if they are JPGs. I can still go to the images i imported last week and the RAW fine tuning works fine, even some in the same album... any ideas?
    Aperture 1.5.6

    more informaion:
    today's images imported fine, so you can rule out the security patch.
    even more peculiar i exported some of the images, and imported the same masters back in and much to my suprise the RAW fine tuning works. I rebuilt the library hoping that would help but it didn't, I'm just going to go back through the library and re-tag and rate my picks from the shoot, but any idea on how to keep this from happening again? it has to be some wacky setting or something, I can export the broken image and the import it again and it works fine.
    any help would be appreciated
    mark

  • RAW Fine tuning

    The RAW Fine tuning options are not showing up in my adjustments hud. I have Aperture 1.5.6. I can't find a way to add this to my adjustments hud. How can I add this?

    What camera are you using? I don't think that Aperture supports raw fine tuning for every camera—only those with optimized support.
    Cheers,
    Andreas

  • Raw fine tuning reverts back to older version

    HI
    I've spent the last couple of days editing several hundred files, they were originally imported before AP2 was released, so would have been using RAW file tuning version 1.1.
    However I selected each one individually Removed all adjustments, which automatically gives it the Version 2 Raw Fine Tuning.
    Today when I review the edited files, they have all reverted back to Raw Fine Tuning 1.1, the adjustments are still there, however the Recovery and Black Point sliders are greyed out. I'm using the Nikon D2Xs, so I know Version 2 is compatible.
    Any ideas as to how this happened would be most welcome, and how to resolve this without having to go through each file again individually.
    As a side note, there are a few files which have retained the Version 2 decoding, I am suspecting that these are one's where I have manually selected the decode rather than automatically via Remove All Adjustments.
    Thank for any advice.
    Kiran

    keypix wrote:
    What do you mean by 'migrating them'. I was under the impression that when Aperture 2 was first installed, it automatically migrated everything in the library.
    Definitely NOT, thank the deity-of-your-choice! That would mean that all your old images would change appearance, in some cases drastically. Given that what you see in Aperture are effectively 'virtual' images that don't exist as regular files until you export them this would be a mess-up of monumental proportions.
    All RAW files adjusted using the old RAW 1.1 decoding continue to use 1.1 until you change them, either by 'manually' choosing a different version of the decoding engine in the RAW Fine Tuning adjustment brick or by going to File>Migrate Images...
    Ian

  • RAW Fine Tuning Dimmed out for D80 RAW Picture

    When I open a "RAW" file taken with a Nikon D80, the "RAW Fine Tuning" options are all dimmed out in the "Adjustment" panel and won't let me make adjustments. It shows my camera properly as a Nikon D80, but none of the sliders (Boost, Sharpening, Chroma Blur, etc) will work.
    Is there some setting I have to adjust, or is it something else?

    There may be a simpler solution yet - when you first click a raw file, all of these options are greyed out until the "real" file loads. At first it just displays a preview, and while that is happening, stuff is greyed out - once the file loads, the controls become active.
    So, just check if you have the same problem if you let the file sit there for a minute until it finishes loading Remember - Aperture is still pretty slow with big files (it just looks fast.)

Maybe you are looking for