Aperture 3 with ridiculous performance
I started using Aperture on version 2 and I loved it. The main reason for that was that it was super fast in handling my 30 thousand photos.
After I upgraded to Aperture 3 though, the performance is pathetic. I can barely scroll through photos. Sometimes creating a simple Smart Album takes more than 60 seconds -- and I'm not exaggerating.
I really don't like Adobe, but I think I'll have to switch to LightRoom if I can get this fixed. I've read some posts about disk fragmentation being the cause for the problem, but I find that very hard to believe. Why wouldn't the same thing happen to Aperture 2?
Turning off Faces didn't help.
Any other ideas on how to fix?
First, are you using "high performance" for the graphics settings on your MacBook Pro? You definitely want to do that.
Second, some here have reported that deleting the Aperture preferences file has helped. I can't say as I had real performance issues so I'm not sure.
Finally, is Aperture 3 doing anything in the background still (updating thumbnails, etc.)? This can slow things down.
I'll note that I find A3 to be faster on Snow Leopard than A2 was. I also think the fragmentation discussion is a red herring. But I also have good performance... it'd be nice if there were a silver bullet for what the difference is between the machines but I'm not sure.
Similar Messages
-
I want to buy a new mac. Would a 21.5 inch Imac run Aperture 3 with 4GB or ram until I can upgrade to 8GB? And would the stock 512mb video card be fine.
davidfromdartmouth wrote:Would a 21.5 inch Imac run Aperture 3 with 4GB or ram until I can upgrade to 8GB?
Specifically, after you buy a Mac test for RAM needs by calculating page outs as described below. The good news is that RAM is cheap enough that every Aperture user who can should upgrade to at least 8 GB RAM.
And would the stock 512mb video card be fine.
All 2011 Macs will "run" Aperture, but lesser CPUs and/or lesser GPUs will provide lesser performance. What "fine" is depends on your workflow and how demanding you are. There are some folks here happy with the power of the box you suggest.
GENERIC UPGRADE ADVICE
Apologies in advance to those for whom this info is redundant.
Some general guidelines for operation of heavy graphics applications (specifically Aperture):
• Only the strongest Macs will provide the strongest operation. Owners of weaker boxes (CPU, GPU, i/o, RAM) or older boxes will experience lesser performance.
• There is a huge difference in hardware needs among workflows. A heavy pro workflow will only work best on a top well-equipped modern box.
• As RAM prices continually fall RAM needs will continually grow. This has been true since the beginning of computing.
OS X has enabled Photoshop, for instance, to take advantage of at least 32 GB RAM for many years even though 32-bit operation limited direct RAM access to ~3 GB RAM.
• All computers/OSs/workflows are different. Each individual user needs to carefully evaluate (meaning see what the early adopters report) workflow and hardware operation BEFORE upgrading any application or OS.
• Hardware upgrades should be planned for always-increasing future OS/application demands, not just for today. After all, a computer purchased today is used for the next 3 years, not last year.
• SSDs rock. All users, all apps will benefit from using a solid state drive as the boot/apps drive. Strongly recommended. RAM-challenged setups will additionally benefit from 10x faster page outs.
• All users should regularly evaluate their workflows by checking the Page Outs number under System Memory on the Activity Monitor app before starting a work session; then rechecking after working. If the page outs number increased significantly during operation the workflow is RAM-starved and steps should be taken, such as increasing RAM or restarting and running only one app at a time - - or switching from 64-bit operation to 32-bit operation. [Note: this is a manual calculation of any change in page outs. Ignore the cute pie charts, page ins, etc.]
HTH
-Allen Wicks -
Is it possible to share an aperture library with different users using osx server.
is it possible to share an aperture library with different users using osx server.
Not really. You should not be sharing an Aperture library over a network. It's not designed for that and you'll likely corrupt your library at some point.
-
Since loading Lion, I've experienced much more instability than Snow Leopard. In particular, Mail crashes with regularity, full-screen apps seem to run slower and show the beach ball more often for longer, etc. I love the features, but I'm disappointed with the performance. Any help coming from Apple? I've been sending them so many reports after crashes, that their file must be full!
Summoning max. courage, I did what you advised. Here is the result. What does this tell you? My Lion 7.2 (mid 2011 iMac) has several annoying glitches (which I have so far tolerated through gritted teeth) but none that have actually stopped me working.
BTW, I see several items involving CleanMyMac which I did not know I had. It is generally villified as a trouble-maker. Spotlight can't find an app. or a utility of that name. How can I get rid of what's there please? Just delete?
Last login: Thu Nov 3 20:55:11 on console
Steve-Kirkbys-iMac:~ stevekirkby$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
com.AmbrosiaSW.AudioSupport(4.0)
Steve-Kirkbys-iMac:~ stevekirkby$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.openssh.sshd
com.stclairsoft.DefaultFolderXAgent
com.microsoft.office.licensing.helper
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8
com.bombich.ccc
com.adobe.SwitchBoard
Steve-Kirkbys-iMac:~ stevekirkby$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.sony.PMBPortable.AutoRun
uk.co.markallan.clamxav.freshclam
com.veoh.webplayer.startup
com.macpaw.CleanMyMac.volumeWatcher
com.macpaw.CleanMyMac.trashSizeWatcher
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
Steve-Kirkbys-iMac:~ stevekirkby$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
ApplicationEnhancer.framework
AudioMixEngine.framework
FxPlug.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProFX.framework
ProMetadataSupport.framework
TSLicense.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
EPPEX Plugin.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.sony.PMBPortable.AutoRun.plist
/Library/LaunchDaemons:
com.adobe.SwitchBoard.plist
com.apple.remotepairtool.plist
com.bombich.ccc.plist
com.bombich.ccc.scheduledtask.067493DB-2728-4DF3-87D8-092EF69086E8.plist
com.microsoft.office.licensing.helper.plist
com.stclairsoft.DefaultFolderXAgent.plist
/Library/PreferencePanes:
.DS_Store
Application Enhancer.prefPane
Default Folder X.prefPane
DejaVu.prefPane
Flash Player.prefPane
Flip4Mac WMV.prefPane
/Library/PrivilegedHelperTools:
com.bombich.ccc
com.microsoft.office.licensing.helper
com.stclairsoft.DefaultFolderXAgent
/Library/QuickLook:
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
DesktopVideoOut.component
DivX 6 Decoder.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
/Library/ScriptingAdditions:
.DS_Store
Adobe Unit Types.osax
Default Folder X Addition.osax
/Library/StartupItems:
Library/Address Book Plug-Ins:
Library/Frameworks:
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.macpaw.CleanMyMac.trashSizeWatcher.plist
com.macpaw.CleanMyMac.volumeWatcher.plist
com.veoh.webplayer.startup.plist
uk.co.markallan.clamxav.freshclam.plist
Library/PreferencePanes:
.DS_Store
Perian.prefPane
WindowShade X.prefPane
Library/QuickTime:
AC3MovieImport.component
Perian.component
Library/ScriptingAdditions:
Steve-Kirkbys-iMac:~ stevekirkby$ -
Need advise on large file processing with good performance
Hi All,
I am working on a program in which I have to read millions of records from application server file.For this, I am reading 1 million records each time and uploading into the DB-table.
what is the best approach to process the millions of records.what I am currently doing is, I read 1 million records one by one , modify each and every record based on some conditions and store them in one internal table and update the DB table.
I am also thinking alternate approach is,read 1 million into one internal table and after that within the loop, modify each and every records for given condition and update the DB table.
which approach is the best one?
you can advise me any other alternate approches with good performance.
Regards,
Nivas
Edited by: Nivas4081 on Jul 24, 2008 2:55 PMHi Joshi,
Thanks for your reply reply. I have tested both ways as I mentioned in my query but reading record by reocrd and update data packets takes less time than reading into iternal table,then modify and update the DB table.
Hi ralph,
Thanks for the reply.
The modifications are similar in all the lines.I get related data from other class/method,do some calculation and modify each each record.
Are there any performnace tricks to be followed when processing large amount of data.by the way I am reading certail amount of records say 400K and updating DB table using parallel processing.
Apart from this, any suggestions on this?
Regards,
Nivas -
I have a 27" iMac and want to play Windows games with optimal performance. What do I need to do?
Install windows with Bootcamp. http://www.apple.com/support/bootcamp/
-
I have recently started a solaris. I have a solaris using 64x and 86x systems and have java. The machine is very active and is very quick. I am happy so far with its performance and think its worthwhile to continue with my projects. That's all I have to say.
John LuptonI have recently started a solaris. I have a solaris using 64x and 86x systems and have java. The machine is very active and is very quick. I am happy so far with its performance and think its worthwhile to continue with my projects. That's all I have to say.
John Lupton -
HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO. THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTSFind the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
And check your caps look key. It appears to be stuck. -
Select data from database tables with high performance
hi all,
how to select data from different database tables with high performance.
im using for all entries instead of inner joins, even though burden on data base tables is going very high ( 90 % in se30)
hw to increase the performance.
kindly, reply.
thnksAlso Check you are not using open sql much like distict order by group by , use abap techniques on internal table to acive the same.
also Dont use select endselect.
if possible use up to n rows claus....
taht will limit the data base hits.
also dont run select in siode any loops.
i guess these are some of the trics oyu can use to avoid frequent DATA BASE HITS AND ABVOID THE DATA BASE LAOD. -
Can I use aperture 3 with 2.4 ghz intel core 2 duo?
Can I use Aperture 3 with an imac with a 2.4 ghz intel core duo processor?
Yes. I still use a 2006 2.33 GHz C2D MBP with 3 GB RAM as a backup box, and it "works." Be aware that iMac is underpowered overall for Aperture usage, but some folks do OK with it (4 GB RAM minimum). Like DLS said, more RAM is better than less RAM. 8 GB RAM is generally appropriate, but I can even overload the 8 GB in my 2011 MBP when running an aggressive Aperture/Photoshop workflow.
Also the stronger the GPU the better, and an SSD is far far preferable to a hard drive for boot, because any page outs go to SSD instead of to the horribly slow 2.5" laptop drive.
HTH
-Allen -
Share aperture library with another aperture user
How do I share the same aperture library with another aperture user on a different computer each using separate aperture software? We have have tried using a hard drive, but the vault is not showing up to download.
are you trying to work simultaneously from the same library? I'm not sure Aperture will handle that one very well, but as I've never tried it I can't say for certain.
You may be able to "check out" projects from the main library to work on individually within your own personal libraries. When you're done w/ your work you would check the project back in to the main library for someone else to use.
I think the danger is in trying to access the same .plist or image at the same time as Aperture wouldn't know who's instructions to follow. -
Error with device performance report
Hi all
I had propblem with Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
ThanksHi all
Here is error about Device performance report. Please help me fix it. Thanks
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.OutOfMemoryError: unable to create new native thread
java.lang.Thread.start0(Native Method)
java.lang.Thread.start(Thread.java:640)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:923)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:434)
sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1019)
com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl.getOutputStream(HttpsURLConnectionOldImpl.java:200)
com.cisco.nm.xms.ctm.client.DefaultHTTPClientImpl.getOutputStream(DefaultHTTPClientImpl.java:83)
com.cisco.nm.xms.ctm.client.CTMCall.performBinaryRPC(CTMCall.java:782)
com.cisco.nm.xms.ctm.client.CTMCall.performRPC(CTMCall.java:694)
com.cisco.nm.xms.ctm.client.CTMCall.invoke(CTMCall.java:409)
com.cisco.nm.xms.ctm.client.CTMCall.setMethodAndInvoke(CTMCall.java:449)
com.cisco.nm.xms.ctm.client.CTMClientProxy.invoke(CTMClientProxy.java:70)
$Proxy544.evaluateGroup(Unknown Source)
com.cisco.nm.xms.ogs.client.OGSServerProxy.evaluateGroup(OGSServerProxy.java:900)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.evaluateGroup(DeviceSelectorTreeGenerator.java:2621)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getFirstLevelGroups(DeviceSelectorTreeGenerator.java:453)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getGroupsAndObjects(DeviceSelectorTreeGenerator.java:399)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getTreeEntries(DeviceSelectorTreeGenerator.java:192)
com.cisco.nm.uii.hos.HOSRequestHelper.generateParameterEntries(HOSRequestHelper.java:5560)
com.cisco.nm.uii.hos.HOSRequestHelper.constructHOSTree(HOSRequestHelper.java:1010)
com.cisco.nm.upm.reports.devicedashboard.DeviceDashBoardAction.perform(DeviceDashBoardAction.java:65)
org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.29 logs.
Apache Tomcat/5.5.29 -
Capture NX or Aperture 2 with D300 ***
Alright, so what is the big deal about RAW files from a D300 not working right with anything but Capture NX. Can someone tell me how I'm supposed to edit 2000 pics from the wedding I'm about to shoot next week with Capture NX when it is so slow and has the worst user interface ever? Because Aperture 2 doesn't read my RAW files correctly. Or is this just something people are blowing way out of context? Should I not worry about this:
http://www.flickr.com/groups/aperture_users/discuss/72157604790242946/The "picture styles" information (punchy, vibrant, portrait, faithful, whatever Nikon calls it I use Canon) is Nikon proprietary info in the RAW file. Aperture won't read it -- it does a default conversion.
That is why the Nikon version is so (over)saturated in the examples you showed. Aperture most certainly does read your RAW files correctly; it just doesn't read Nikon's proprietary tags.
What can you do? Well, for photos that are in similar light, you can tweak one of them (crank the saturation and/or vibrance) and the lift and stamp it to the rest. Should be pretty quick.
I don't think though it's really reasonable to say "This is the default Aperture conversion with NO adjustments this is a real problem." Because, well, RAW files tend to be flat. They tend to need a tweak or two, but for 2000 files in Aperture in similar light it wouldn't take all that long to tweak them all and convert them to JPEGs in Aperture. On a high-end machine maybe 2 minutes to edit one image and then 10 seconds per image to stamp and export. -
I am a songwriter and want to upload my work to itune but I need a few question cleared up.
1. Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
2. What percentage of sales does itune take or is it a flat rate?
3. When i upload does itune give me an option to set price for my work.?TownSquareTheMusic wrote:
I am a songwriter and want to upload my work to itune but I need a few question cleared up.
1. Does Itune interact with the Performing Arts organization such as BMI in order for artist to be paid or do i just set up a paypal account and pay artist myself?
2. What percentage of sales does itune take or is it a flat rate?
3. When i upload does itune give me an option to set price for my work.?
Town Square,
In addition to the iTunes Store, you may wish to check out some of the online stores that may be a bit more flexible for artists just starting to sell online:
NoiseTrade
BandCamp -
Using Aperture 3 with new (2011) iMac
Currently I have been using Aperture 3 with my MBP. My library is on an external drive. When I bought my iMac, I hooked up my drive to that machine and then opened Aperture and I got a message that popped up saying something like my library was 32bit and the iMac is 64bit and I would have to convert my entire library over to be able to use AP3 on my iMac. Does this sound right. I remember it was something along those lines and I ended up not converting all my files and still use my MBP instead.
How is your workflow set up? How are you moving the Aperture Library around? What OS X and what Aperture versions?
After backup to an independent drive (stuff happens...) make sure all apps and the OS are current. Also read this regarding
Switching Kernels:
http://support.apple.com/kb/HT4287
HTH
-Allen
Maybe you are looking for
-
Report won't print to the end of width in Oracle E-Business Suite
Hello all, I desperately need help to setup Reports 6i layout. I created a report for a 8.3 x 11.69" and it seems fine when I print directly from Reports Developer but when I register it in Oracle E-Business Suite 11.5.10.2 it won't print to the end
-
Vista 64 installed, won't launch - The folder "iTunes cannot be found...
or created, and is required. The default location for this folder is inside the "Music" folder. The folder does seem to be there. Any ideas? Thank you!
-
hi, getting below error on database startup. log is attached from alert log file. Wed Nov 16 14:24:20 2011 ALTER DATABASE MOUNT Wed Nov 16 14:24:20 2011 ORA-00202: control file: '/oradata2/ctftdb2/data/controlctftdb201.ctl' ORA-27086: unable to lock
-
Mac OS 10.8 Temp and CPU spikes
I'm having a strange problem where any random program I have open will suddenly jump to 100% + CPU in activity monitor making the CPU temps jump from ~55C to 80 or 90C. This is really annoying as I have to close the affected program and reopen it whe
-
Handwriting Dakota Font Can't Be Used in Mail
For years I've been able to use "Handwriting Dakota" font in mail. Now whenever I select it at the top of the New Message form the font immediately reverts to "Helvetica 14" (my default font - set in Preferences) when I type the first letter. This se