Aperture 3 won't recognize Aperture 2 library after HD crash.

I have a MacBookPro 17 inch, purchased last year. My HD was showing some signs of slowing down, so I attempted to install Snow Leopard to see if that would speed things up. My computer crashed on installation (maybe dead RAM or HD?). I had already backed my Aperture 2 library from my MacBook Pro onto a portable Hard Drive.
I also have a Quad Core Intel MacPro with Snow Leopard and Aperture 3 installed. When I tried to recover my Aperture 2 library from the portable HD, Aperture 3 doesn't recognize it. I have tried to change the library from over to the Aperture 2 library multiple times and it isn't even reading that there is an Aperture Library present.
Any suggestions would be appreciated. One thought that I had was to remove Aperture 3, Install Aperture 2 and see if I can recover my Aperture 2 Library. I would then re-install Aperture 3. However, this seems like a lot of work for something that should be relatively easy (i.e. Aperture 3 should read an Aperture 2 library).
Thanks!

Check this link and follow the steps listed here.
let us know how you go
Tony

Similar Messages

ITunes reverting to old library after system crash

I just started my itunes after my computer crashed, and it has reverted back to an old library from 2010.
I've tried holding shift and opening itunes to select what library file (.itl) it uses, and even when I select the most recent one, which is dated yesterday, it still only loads the music that I added sometime in 2010.
All of the music and apps I have added since then (which is a lot!) are still in my itunes Media > Music folder, yet they are not showing up when I open itunes. This goes for both music/apps I have purchased from itunes, and music I have added.
Can anyone help me?! I don't want to have go through and add two years of music and apps again!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

ITunes won't recognize my iPod touch after a failed update--my iPod is stuck on the "plug into itunes" screen

Yesterday, I had bought myself an ipod touch and it was working just fine until today when I went along with an itunes prompt to update my ipod. It failed to update and now won't recognize it, I checked to see if it was recognized by my computer--and it is, but a thing pops up that says "access denied" whenever I try to click on it. The screen on my ipod is stuck wanting me to connect to itunes.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work

My computer won't recognize my ipod anymore. after all the trouble shooting i don't have an apple mobile device driver how do i get one?

Please help me! my computer no longer recognizes my ipod. After troubleshooting for 2 days i think I need an apple mobile device driver. How can I get one?

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Is there any way to retrieve files from my Original Aperture 2 library after conversion to Aperture 3?

My original conversion locked up due to damaged file. I repaired Library and process completed,I thought! Now I'm finding folders from the conversion empty. I can go back to the Original Library and use the show contents command to view the files. They are still in place, but the import process in Aperture 3 doesn't see the files to import? Any ideas on how to retrive these missing files?

Thanks for the info. I do have the Aperture 2 disc so I'll re-install and repair library then give it a go again. It will probably take a few days as I have a HUGE library. I'll let you know the outcome when it completes! Thanks again for the help.
Mark

IMovie does not see Aperture / iTunes library after hard drive restore

Hi all,
I recently exchanged the 320GB drive in my MacBook for a 500GB drive. I installed the 500GB drive and restored everything from my time machine backup. This went flawlessly and the MacBook works great, except for two issues:
1st: It did not read NTFS volumes anymore, I had to reinstall NTFS-3G - problem fixed.
2nd: I do not see my Aperture and iTunes libraries in iMovie '09 anymore. This worked great before.
Does anyone know how to fix this? Or what the problem could be?
Many thanks,
Michael

DaneelGiskard wrote:
.. restored everything from my time machine backup.
.. I do not see my Aperture and iTunes libraries in iMovie '09 anymore. ..
Does anyone know how to fix this? Or what the problem could be?
read about that problem frequently.. never got an answer, if the following usual advice fixes the problem:
• check permissions with Disk Utility
• check read/write rights of specific Folder AND files inside via Finder..

New Computer won't recognize my music library

I just had to purchase a new PC when my old one died. Got a new Dell with Vista installed. Fortunately, I had a back up of all my iTunes music on a removable harddrive. I've downloaded and installed iTunes onto my new computer and copied all of my music files into the appropriate music/itunes/itunesmusic folder, but iTunes doesn't recognize the music. I've checked the path and it is correct (since it was the default iTunes set up). I've authorized the computer. I even tried consolidating, but nothing has worked. Based on the Apple info about Vista, I've uninstalled the program and am now downloading and reinstalling it again. Any other suggestions on how I can get iTunes to recognize my old music files? Is it okay for me to have copied the files from the old folder to the new or do I need to do something else? Do they need to be imported? Thanks for your help.
Dell Dimension E520 Other OS Windows Vista
Dell Dimension E520 Other OS Windows Vista

Hey MattyTimao!
I would strongly suggest that you go through the steps in the following article to minimize any interactions between the previous owner’s data and the new data you are wishing to store on the computer:
What to do before selling or giving away your Mac
http://support.apple.com/kb/ht5189
To answer your question specifically though, I would recommend creating a new library file for your music and deleting the previous iTunes Library to get rid of the previous music:
iTunes: How to open an alternate iTunes Library file or create a new one
http://support.apple.com/kb/ht1589
If you wish to use the iTunes Library file that is already created and being used, you will need to import media into the iTunes Library:
iTunes: About the Add to Library, Import, and Convert functions
http://support.apple.com/kb/ht1347
Thanks for coming to the Apple Support Communities!
Regards,
Braden

ITunes Won't Recognize My Music Library on Ext Hard Drive

Hey All,
Just got a iBook G4 and I'm trying to access my music on iTunes, but I can't. Is there a trick I'm missing here? I set the folder location to the Ext Drive, but still nothing. Everything work with out issue on my old iBook G3.
Any suggestions?
Thanks,
Mike

Pointing iTunes to a folder simply tells iTunes to put all new music there. You need to File -> *Add to library* then select that music folder.

Time Machine won't recognize my last backup after a power outage

Good Afternoon Everyone,
I just set up a Western Digital My Book Live on my network. Last week, I set up Time Machine to start a backup on my MacBook Pro (running 10.7.5). It took 2 days to finish, but all went well. For three days, all the backups worked perfectly. However, we had a power outage for an hour during the night and now that I turn on my MacBook Pro, Time Machine recognizes the disk, but doesn't have a record of any backup.
I have gone to the drive manually and seen that the files are still there, but how to I tell Time Maching on my MacBook that the full backup is already on that NAS drive, so that it won't do a full backup?
I would really appreciate the help.
Brett

TM apparently identifies the machine's backup by the Computer Name stored in the Sharing preferences. Try opening Sharing preferences and changing the Computer Name to the one you used previously when your TM backup was created.
Also see:
Time Machine Troubleshooting
Here are several articles to help troubleshoot Time Machine Problems as well as assist in properly setting up Time Machine.
Mac 101- Using Time Machine in Mac OS X 10.5 Leopard
Is Time Machine all you need?
Some advice for those using Time Machine
TidBITS Macs & Mac OS X- Time Machine- The Good, the Bad, and the Missing Features
Mac OS X 10.5- Time Machine backups are not visible
OS X 10.5- Time Machine stops backing up to external disk
10.5- Disable the 'use this disk?' Time Machine dialog
Time Machine tips and troubleshooting
Mac OS X 10.5 Help- Restoring files backed up with Time Machine
OS X 10.5- Using Time Machine and troubleshooting Time Machine issues

Comp. won't recognize ipod touch 4g after ios4.3 update

So i updated my ipod 4g to ios4.3 and it downloaded and installed fine but then my computer didn't recognize my ipod. A window came up saying that "itunes has detected an ipod in recovery. You must restore this ipod before it can be used with itunes." I then restored it but it didn't finish and the same window appeared. I tried restoring a second time but then an error appeared "Error (-1)"
I tried looking up what that error was but it is not in the support/help portion in the apple website. So now my ipod is just sitting here, fully plugged in with the connect to itunes screen.
I also updated to the latest version of itunes BEFORE I tried to update to ios4.3. I rechecked to make sure itunes updated but it stated that it did. Please help anyone!
Oh, I have a PC with Windows 7.

Have a similar problem. My computer is PC with 64 bit windows 7. Itunes is version 10.2.1.1. I use Microsoft Security Essentials for virus/firewall.
Anyways, I did the update this morning. When download finally finished, ITunes began updating my IPod touch & I got a single error (I didn't catch it, but may have been something like 1620 or 1602). I restarted my computer to try everything over again. I booted up and loaded Itunes, but it wasn't saying anything, and I also noticed my IPod wasn't showing up either. I checked, and it was still plugged in, but I did notice that it had a screen with a usb plug pointing to Itunes like I should plug in my Ipod, but it was plugged in.
I checked on internet a bit & didn't find much that was very helpful. I did find one thing on Apple support that sometimes driver gets messed up on update (http://support.apple.com/kb/TS1538), so I tried that. This entailed deleting the usb driver for apple mobile devices, and then scanningn for new devices, and restoring the apple mobile device driver from a directory under the C drive (c:/program files/common files/apple/mobile device support/drivers). Updating to this file gives a driver that calls itself "Apple Recover (iBoot) USB Driver" with a driver date of 2/11/2011. This has no effect, and I still have the same screen on my IPod and it doesn't show up in Itunes.
On internet I found that my IPod seems to be in a recovery mode, and I tried a couple of the listed methods to get out of the recover mode (these all failed for me, but maybe they'll help someone else). I held down both home & power buttons for 10 sec and then letting go of just the power button. Then you wait until after apple logo dissapears (about another 10 sec) and then you let go of the home button. This is supposed to start the recovery mode for your IPod, but for me I just get a blank screen. There is also a reverse method that does either a DFU or Recovery mode. For that method you just reverse the releasing of the Home and Power buttons, but that just got me back to the usb+itunes screen instead of to a blank screen.
While doing both of these things, I did notice that it would sometimes replace the Recovery Driver with a DFU driver, or sometimes you'd get 2 non-working Recovery drivers. None of these drivers had any effect on Itunes being able to see my IPod. The Apple Recovery (iBoot) USB Driver only comes up when you do the apple support option.
Hopefully this error is widespread enough that it will get apple's attention and a fix will come forth shortly. I'm at my wit's end trying to fix it.

OS X Lion doesn't seem to recognize my iTunes library after install. Safe and smooth to simply reinstall iTunes??

Gives the message: "The file “iTunes Library.itl” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
OK to download without risk of losing library?

Some Users have reported that a Restore as New has resolved issues after the Update...
See Here
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

MacBook Pro won't recognize Canon MP800, even after reloading print drivers

Time Warner Cable updated servers. We had to update the DNS address for the MacBook Pro to maintain internet access. After doing this MacBook Pro doesn't recognize the Canon MP800 printer - shows no print drivers for Canon IJ Network , even after reinstalling printer software and downloading print drivers from Canon website - MPNavigator 2.0 keeps saying print driver has not installed. The MacBook is wirelessly networked with the printer and an EMac. We haven't updated the DNS address for the EMac because it still recognizes the printer and prints; however, we now don't have internet access with EMac as a result.

If printing wirelessly check your printer sharing settings - System Preferences/Sharing
If printer is connected directly to your computer, check your printer connections, read the troubleshooting section in your printer manual and check the printer manufacturer website for drivers you may need to update.

Plays on iPod won't update to iTunes library after 9.2 update

so i went on vacation for 2 weeks with my ipod and in that time watched 15 previously unwatched episodes of tv, 40 songs previously unplayed, as well as hundreds of others played, plus a few ratings changed. when i came home, i saw the 9.2 update was out and so i updated. afterwards, i plugged in my ipod. i waited past the beach ball effect and it all synced, but everything is the same, as if nothing was played on my ipod in those 2 weeks (according to my library). is there anything i can do to fix these? the only thing that transferred over to my library is an on-the-go playlist i made
ipod classic 6th generation 80g, macbook intel core duo from late 2007 but running on snow leopard

I did some more investigation and made an interesting observation. My track info did update as it should. The problem lies (for me at least) when viewing tracks in a SmartPlaylist. I made a 5 song smart playlist to see if I could figure out what was the problem. I also made a normal playlist and copied the songs from the smart playlist into the normal one. After I listened to the five songs (one of which I paused in, and one I skipped) all four of the ones I listened to updated in the normal playlist. I then looked at the smart playlist and all of the songs still showed their previous Last Played dates.
So, try looking at your 'un-updated' tracks outside of a smart playlist and see if they in fact, aren't updating.

Windows XP won't recognize built-in wireless AFTER installing the drivers.

Hello,
I have an iMac, post leopard release.
So I ran Bootcamp, everything went well, and windows XP runs fine. I used an XP Pro edition with SP2 and all of that is in order. I initially used a Leopard Install DVD of my friends to install the drivers, because I couldn't find the disk that came with my mac, and that worked until it got the wireless components, and then would crash windows.
I then found, luckily, and put in the Mac OSX install disk that came with my mac and that installed the drivers.
(or at least I think it did, it sure looked like it was, but afterwards it seemed as though all it did was install a program called Bootcamp that helps with running dual systems on a Mac.)
But XP wont pick up any wireless networks on the page where you can manage your networks. It's as if I have no built in wireless.
I don't know if you have to actually set up the built in wireless to work with windows, or if the disks I put in actually didn't install the drivers. but I'm starting to go insane...
(on one last side note, my wireless mighty mouse and wireless keyboard won't connect in XP either, BUT only after I used the Mac OSX install CD.... it's very strange....

Any luck on the wireless issue? I too have a MacBook Pro that accesses the wireless internet with no problems on the Mac side. That is not the case on the PC side, using the Windows XP Professional. I can not access any internet, wireless or hardwired directly into the router. As a matter of fact, the Internet Wizard runs on the PC side and ends saying error.
I've contacted my internet provider, who walked me through the process to create a new internet account, still no luck. Ideas would be wonderful seeing that I have a single piece of PC only software I am trying to use for some charity work.

Troubles using external hard drive, why won't it show my library after I've led the path to it?

Hi, my library is on an external drive, I've gone to preferences and clicked the way throught to the correct folder of the itunes library I'd like to use. When I click on Library, nothing is there.
Thank you for your help

You don't do it with preferences. As it says, that tells it where to store media and your library is more than just media.
Hold down the option/alt key while starting iTunes and guide it to the iTunes Library.itl file in the iTunes folder you wish to use.

Aperture 3 won't recognize Aperture 2 library after HD crash.

Similar Messages

Maybe you are looking for