APERTURE - ADD NUMBERS

How can I add numbers to the foots.
I asked the help section, but I cannot find
Import  (Importübersicht)
nor name files (Datei benennen).
I would like to add a name and a number.
Thanks.

Do you want to add numbers when importing the photos or afterwards?
When importing, use the "Rename Files" brick in the Import panel. You may have to add this brick from the "Import Settings" drop-down panel.
Then use one of the presets that will add an index or counter:
If the images have already been imported, try the "Metadata" menu:  Metadata > Batch Change > "Custom name with index" or similar.
All these methods will change the version name in Aperture, but not the original filenames.  If you actually want to change the filenames of the originals, try "Apply to original files" when batch changing the version names.

Similar Messages

  • Can I use iPad to record excel inventory figures? I have excel on my mac. But run around taking inventory on iPad. Want to add numbers on pad as I go. Please advise oh smart Apple peeps!

    Can I use my iPad to record excel inventory figures? I have excel on my Macbook Air and have Mavericks on it. But I use the iPad when I run around taking inventory. The computer is just too large and cumbersome to carry while walking around. I Want to add numbers to my excel docs whilst right on my ipad as I go through inventory.
    Is there a way to get my excel doc into my iPad and open it to add numbers?
    And, because Mavericks is now the system that allows iPad (ios) devices to talk to Mavericks on macs, isn't this supposed to now be doable?
    And, woe is me if not yet at this time. If so, is there an Application some smart person created that will allow me to transfer from mac to ipad and back to mac and excel numbers I input?
    Muchos gracias!

    You will need Numbers (On your Mac) and then you can do what you wish.

  • Aperture Adds Strange Keywords

    Hello,
    I have imported about 20 iPhoto libraries into Aperture 3.  Many of these have keywords assigned in iPhoto and they appear correctly as keywords in Aperture.  Aperture adds other keywords such as iPhoto Original, etc. which I understand.  However, there are cases in which Aperture has also added one of its Project titles to a photo's keyword list (these were not keywords in the iPhoto images).  If I open the Aperture keyword list these are in it but  they are not in the Filter HUD keyword list.  What is going on here?  I am wondering if the Aperture library is corrupted and I need to restore from the Vault backup which I think was made before I noticed this problem.  The iPhoto libraries seem to work fine but could they be a problem (Aperture uses iPhoto Event titles as Project titles)?
    Thanks for any suggestions.
    Mike

    Hello Leonie,
    Thank you for your response.
    Yes, I did mean Keyword HUD, sorry.  If I examine the Keyword HUD and the Keyword Filter with all photos in the library selected, the oddball added keywords appear in the HUD but not the filter.
    Thanks for the tip on hierarchical  keyword categories.  I tried that with Library Manager but when they were shared among all my libraries the structure I set up was lost.  I plan to use this feature in Aperture once my library is complete.
    However, the strange keyword question may be academic since I discovered after my post that I had the following warnings from Console which I interpret to mean serious problems with the library:
    One Console Warning like this (last one on the list):
    12/6/11 4:21:16 PM          Aperture[1095]          An instance 0x134a66970 of class RKVersion was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
    <NSKeyValueObservationInfo 0x12b9ed890> (
    <NSKeyValueObservance 0x13a0d7110: Observer: 0x13a0d72d0, Key path: isReadOnly, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x1399a9510>
    <NSKeyValueObservance 0x13a0d94d0: Observer: 0x13a0d88e0, Key path: isReadOnly, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x1399a9510>
    <NSKeyValueObservance 0x13a0da720: Observer: 0x13a0da8a0, Key path: isReadOnly, Options: <New: NO, Old: NO, Prior: NO> Context: 0x0, Property: 0x1399a9510>
    Many Console Warnings like this (should have saved more of them):
    12/6/11 1:41:32 PM          ScreenSaverEngine[1132]          Couldn't load image for path: /Volumes/OWC On-The-Go (SATA)/Aperture Library 11:30:11/Aperture Library1.aplibrary/Previews/2011/11/29/20111129-101150/kqu+Y3vXTLulk88738Y6ew/I MG_0517.JPG.jpg
    I wonder if "mistakenly attached" has anything to do with my keyword problem.  I found IMG_0517.JPG.jpg (is  ".JPG.jpg" a valid extension?) and found 5 in Aperture, all of which ware taken at different places and different dates.  The keywords were all OK. Four had the extension .JPG and one had no extension, just IMG_0517.
    My plan now is to restore from my Vault copy and check for the odd keywords it it.  If they are present I guess I will have to trash the library and start over.
    Sorry for such a long post.
    I welcome any observations on this.
    Mike
    Mike

  • Aperture adds the same name to all new locations, how do I delete the name but not the address?

    Aperture adds the same name to all new locations, how do I delete the name but not the address?

    It's easy to rename each unit.  When you connect your iPad and it syncs, the unit will appear on the left of the iTUnes screens just click on the unit there and you can rename it.  You should do this immediately so you can see which unit was backed up by it's name. You can sync as many decices as you want in one iTunes library and you can even share Apps as long as you're going to sync both from teh same iTunes account.  My household has 2 iPad 2s and we share our apps, and we also share downloaded books, magazines, music, etc.......

  • Can't install aperture add on to lightroom 5.6

    I want to install aperture add on to aperture but I don't have creative cloud. I have tried using extension manager but it just keeps coming up with error even after i reintall the manager. Help?

    Well, I'm pretty sure that at this point you may not be able to install the trial at all, since they're set up to think you're cheating on the 30 day limit if you try an uninstall/reinstall. The problem is the PS trial you had before. What you need to do is to download and run this:
    http://www.adobe.com/support/contact/cs3clean.html
    to remove the last bits of the CS3 trial before installing PSE 6. It won't hurt to try it, but whether you'll be able to run the PSE trial will depend on how far the installer got the first time, I'm afraid.

  • Please can you help my Register of names... I want a formula that simply adds numbers in a horizontal row of cells that increase as I add them. Thanks..

    Please can you help my Register of names... I want a formula that simply adds numbers in a horizontal row of cells that increase as I add them. It can not be a range of selected cells  because as I add new cells they are not in the range. Thanks..

    Hi Dave,
    Any formula that references its own row will return the error message you see unless it is in a Header column.
    Convert columns B, C and D to Header Columns, and Jerry's formula will work just fine:
    One caution, though—multiple header columns are a known factor in slowing Numbers down as the table gets larger. You can avoid adding header columns by specifying a 'fixed' range of cells from wich to get the sum and count values in C2 and D2.
    Make sure the range includes at least one 'extra' column. As more runs are added, add columns by inserting them before this 'extra column. If the new columns are inside the range specified in the formula, Numbers will adjust the formula to add the new columns. If they are outside the range, you will need to edit the formulas yourself.
    Note revised formula:
    To add four more runs, click on any cell in column L, then press option-left arrow four times to insert four new columns. Note the change in the formula:
    The last column is always included in the formula, but never gets counted (or summed) because its content is interpreted as a Text value, not a number.
    Note: Except for the change formulas and added columns, this is your original table, with one Header row and one Header column.
    Regards,
    Barry
    Regards,
    barry

  • How do i add numbers in a column?

    I bought numbers ap for ipad a few years ago and i am starting to use it
    i created a list of things to purchase in one column and the prices in a second colum
    colum c has numbers theu c13
    how do I add them?
    Thanks

    in what ever cell you want to have the sum of cells in column C enter "=sum(C)" without the double quotes

  • Applescript to add numbers to end of folders names

    Hello,
    I wrote a script that can rename files and add sequential numbers to them (below):
    set theResult to display dialog "Please enter a name and a number separated by a space." default answer "enter image name here + space + 1" buttons {"Cancel", "OK"} default button 2 with icon 1
    set theText to text returned of theResult
    set theNumber to last word of theText
    set theOffset to offset of theNumber in theText
    set theName to text 1 through (theOffset - 2) of theText
    set k to theNumber as integer
    global theMaximumLength
    tell application "Finder"
      set theFiles to files of front window
      set theMaximumLength to length of (k - 1 + (count theFiles) as text)
      repeat with thisFile in theFiles
      set theExtension to name extension of thisFile
      set theNumber to my addZeros(k as text)
      set the name of thisFile to theName & "_" & theNumber & "." & theExtension
      set k to k + 1
      end repeat
    end tell
    But I want to write a script that will JUST add and _1 to the end of multiple folders.  In other words, take a bunch of folders already created like
    342392501
    342392401
    340766601
    340766201
    339898101
    339828301
    339171301
    337245001
    337086803
    337086802
    337086801
    and add _1 to all of them.  BUT what would be even better would be a script that would duplicate each folder and ad an _1 to the original and then an _2 to the duplicate, and do that for all the folders in the finder.
    Anyone?  Thanks so much!!!!

    Use code such as the following:
    set the_list to "80
    81
    82"
    tell application "Finder"
    set target_folder to (choose folder)
    repeat with this_number in paragraphs of the_list
    set this_folder to (make new folder in target_folder with properties {name:this_number})
    set name of (duplicate this_folder) to name of this_folder & "_2"
    set name of this_folder to name of this_folder & "_1"
    end repeat
    end tell
    Or to save a step if the creation dates don't need to match exactly:
    set the_list to "80
    81
    82"
    tell application "Finder"
    set target_folder to (choose folder)
    repeat with this_number in paragraphs of the_list
    set this_folder to (make new folder in target_folder with properties {name:this_number & "_1"})
    set this_folder to (make new folder in target_folder with properties {name:this_number & "_2"})
    end repeat
    end tell
    (110675)

  • How do I add numbers to a column so they work as outline in ascending order

    I have prepared a Numbers spreadsheet, but realize I may need to insert new rows and want the far left column to automatically update the ascending numbers... but do not know how to make this happen.  Thank you

    in the cells in the far left column use the formula:
    =row()-1
    select the cell you typed this in, copy
    select the column paste.
    when you add new rows this will update automatically so long as all non-header rows contain the same formula in a column

  • Can't add numbers greater than 100 in the Data Editor for a column chart

    I'm trying to create a column chart in Keynote '09 but every time I add a data point with a value greater than 100 in the Data Editor it turns the number into a date. I have the Y Axis set to "Number" and it works fine for numbers less than 100 but I want to show a graph that goes from 0 - 1000. Is this happening to anyone else?
    Chart Settings:
    Y Axis Options:
    - Max = 1000
    - Steps = 5
    - Format = Number
    X Axis Options
    - Show Axis
    - Show Categories
    - No Tick Marks
    thanks in advance for the help

    Welcome to the discussions, AlexEberts.
    No, it's not happening for me. This is what I'm doing
    1) Insert -> Chart -> Column
    2) In the Data editor, for 2007, I enter 110.
    The chart automatically expands to 110 (because, by default, it's set to autosize the Y-axis)
    Does this work for you? If it does, then we can look at why it doesn't work when you add parameters.

  • How do I add numbers to contact groups I've created

    Ive created a list of sub-groups for my fairly extensive contact list, but I can't figure out how to add contacts to these subgroups without having to re-enter the contact info as a "new contact".   Is it possible to select from my "All Contacts" list those numbers I want included in a particular subgroup?

    Email the contact to yourself (share contact).
    In the contacts app, make sure you are in the proper group.
    Import the contact
    Delete the contact in the old group.
    Or:
    http://itunes.apple.com/us/app/speed-names-contacts-groups/id285124918?mt=8

  • Best way to add numbers or layout multiple pages

    I have a ticket that needs to be numbered. It is small enough to go 5 up on a sheet that is 8.5 x 11.
    Each ticket needs to be numbered.
    I can make a master page and add all of the numbers that way and then make a pdf.
    What is the best way to get the numbers on tickets that are printing 5 up on a sheet and I can print through a copier?

    There are many ways to do this:
    1. create single page tickets, auto-numbered, and use imposition feature of copier (if available and access to)
    2. use data merge with numbered list, and produce multiple record layout to create a 5-up document
    3. create a 5-up template with threaded text frames for numbering, import a numbered list that flows through document

  • Aperture add keywords from iPad

    I'm looking at a way to add keywords per image from my new iPad (2012), then sync / update the Aperture 3 DB on the Mac.
    The problem is that the library is huge and there are many keywords created already (1000+), so I don't want an app that proceeds by offering the selection of keywords, that would take ages [there is an average of 10 keywords per picture, each of them would have to be found from a list of 1000...].
    Ideally the input of keywords would be like on Aperture, in the Metadata / Keywords field: input a comma separated list of keywords (so, from the ipad keyboard [assisted by the bluetooth kb]).
    What would you recommend?
    I'm a developer myself and may write a script on the Mac if necessary - I just don't know where to look at.

    Soren Maigaard wrote:
    Is this possible
    Yes, Ottomanic Importer (@v3.6) has built in support for folder names as keywords upon import.
    But note: you can already use folder name in library filter and smart collections - are you sure you need such metadata replicated as keywords too?
    How I would answer that question:
    * If adding in place: no.
    * if copying or moving (into a shallower folder structure, with a simplified naming scheme): yes.
    Rob

  • Add numbers together from a file

    I need to be able to determine the difference of each number from the average and square each difference and sum all the differences.
    I found out that the average of the numbers from the file (7 4 5 9 10) is 7. i just need to minus each number from the average then add those numbers together.
    import java.io.File.*;
    import java.util.Scanner;
    import java.io.IOException.*;
    import java.io.*;
    public class Statistics{
    double Placeholder=0.0;
    double count;
    double Totalnumber=0.0;
    double Difference;
    int line = 0;
    int line1;
    // constructor
      public void CalculateStats()throws Exception {
            Scanner in = new Scanner(new FileReader("H:/programs/num.txt"));
            while  (in.hasNextInt()){
                line = in.nextInt();
                System.out.println(line);
                Placeholder = Placeholder + 1;
                Totalnumber= Totalnumber + line;
                for (count=0; count < Placeholder; count += 1){
                    Difference =Difference + Math.pow((line-(Totalnumber / Placeholder)),2);
                System.out.printf("There are "+Placeholder);
                System.out.printf(" numbers");
                System.out.println("");  
                System.out.println("");
                double Average = Totalnumber / Placeholder;
                System.out.printf("The total value= "+Totalnumber);
                System.out.println("");
                System.out.println("");
                System.out.printf("The average of the numbers= ");
                System.out.printf("%.2f",+Average);
                System.out.println("");
                System.out.println("");
                System.out.println("Difference=" +Difference);
    public static void main (String args[])throws Exception{
    Statistics Run  = new Statistics();
    Run.CalculateStats();
    }so far it displays the average correctly. i just need to find out how to loop the equation for finding the distance.
    To me my loop looks like it would work. where should i go from here?

    while  (in.hasNextInt()){
    line = in.nextInt();
    System.out.println(line);
    Placeholder = Placeholder + 1;
    Totalnumber= Totalnumber + line;
    for (count=0; count < Placeholder; count += 1){
    Difference =Difference + Math.pow((line-(Totalnumber / Placeholder)),2);
    }so far it displays the average correctly. i just need to find out how to loop the equation for finding the distance.
    To me my loop looks like it would work. where should i go from here?You have a for-loop inside your while-loop. The first item through the while-loop your for-loop iterates 1 time; the second time through your while-loop your for-loop iterates 2 times; the third time through your while-loop your for-loop iterates 3 times; ...
    I do not think this is what you want. I'm not sure you need the for-loop at all.

  • Add numbered graphics/icons to a pdf floor plan document

    I have a floor plan of my company's 5th floor (in pdf format) and as their sysadmin I need to add small little graphics representing numbers in little circles or triangle(those little circles or triangle, I can pick them either from another powerpoint or pdf document that has them already / or from those numbering icons you see in gif or jpeg format around the web/ they are basicly meant to describe printer 1, printer 2, fax 1, fax2, ..etc) throughout the pdf plan. I opened my pdf floor plan using Acrobat Writer 7, and the closer I get is to add notes (via the "Add Note" function) which actually get me the little triangle or circle I need but...I can't put numbers in them...(I know I can edit the note and add ..let's say 1,2 or 3 in it's editing text....but those numbers are never displayed in the triangle /circle....you see them only if you move the cursor over the triangle/circle note). I also have the menu TOOLS > Drawing Markups but the problem is the same here: I can add the drawing markups (oval, circle..etc) but cannot get the numbers displayed inside of them. The other closet way is Via the menu TOOLS>DRAWING MARKUPS, TEXT BOX TOOLS: The problem here is that I get my number but in a square box. I would want that number to be in a circle and a triangle instead. PS: I could leave without the copy and paste of the numbering circles or triangle from MS powerpoint/other pdf document if I could just get those numbers in small circles or triangles within the pdf document.

    You can make custom stamps for each of the things you want and then apply them to the document. That will definitely give you the control you want of how it looks, though may be a bit tedious to setup.

Maybe you are looking for