Aperture and EXIF information with EOS 300D RAW (.CRW) files

When I look at the EXIF metadata in Aperture, it shows some things completely wrong:
Shutter speeds over 1 second are shown as 1.0 seconds
The Serial number of the camera is totally wrong
There is no Exposure compensation
the Color Space is wrong (I use sRGB wich Aperture reports as Adobe RGB)
There are 8 pixels missing (see another thread)
There is no information about flash usage
Does anyone else have similar problems?
I am using a Canon EOS 300D (called Digital Rebel is the US)
Tomas Grönvall, Finland

may be a random question but are you using the
modified Firmware for Digital Rebels?
I'm using the original firmware (1.1.1) and Aperture 1.0.1

Similar Messages

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

My iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

my iphone is stolen .. is there any way to know the numbe of the person going to use in the future .. I have the serial no. and every thing .. and it is registered under my name and my information with iTunes ??

If you had find my iphone activated on the iphone itself before it was stolen, then you may be able to track it.
Otherwise, there is nothing you can do.
Sorry.
Report it to the police and your wireless carrier and change your password.

How can I print a picture with a caption and EXIF information?

Hi,
I want to print a picture and use the caption from the meta data and the information about shutter speed, focal length and so on. I figured out that there is a way to print this information in the print module, but it is attached directly to the image, which does not look good. Question is there another way? Maybe involving Photoshop? I would like to have the flexibility I have with the slide show designer, where I can put caption to the left side of the image and ISO, shutter speed and so on to the right. Is this possible somehow?
I am looking for an easy preset that I could apply to a lot of pictures.
Thanks!

There's a Lightroom addin called Mogrify that will do this (and a lot more). Just google it. It's something you have to buy but it's not a lot of money.

IPhoto 6 and Exif information?

Hi All,
My first posting since switching from Windows, so please take it easy on me?
I have a reasonable large digital photo collection from my old PC. I have imported this into iPhoto and allowed iPhoto to copy the images to its folder so it can take care of them. All of this so far has worked well.
I have a question about the Exif information within the actual picture files.
Before the images are imported into iPhoto, from Finder, I can do a “get info” on them and it will tell me information about which camera manufacture, model, etc… However, after importing in to iPhoto, again from Finder, this information is no longer available. But you can see this information from within iPhoto.
Does this mean that the import process has “changed” the files and maybe removed the Exif tags copying them in to the iPhoto database (or something?).
Thanks in advance.
Ady.
20" iMac (2GHz Intel Core Duo, 2GB RAM) Mac OS X (10.4.6) 4GB iPod Nano (Black)

Ady:
Welcome to the Apple Discussions. I'm not able to duplicate that stripping of the EXIF data. All that gets changed in the info window is the size, lost 0.2 MB out of 1.8 in size, and the "Last Opened" time was different. Now this is in the Info window brought up by Command+I in the finder. The files are from a Canon PowerShot S400.
Actually there was one bit of info lost. The file had a keyword associated with it and it did no show up on the edited version of the files in iPhoto but did show up on the original file in iPhoto.
Interesting to note is that if I do an edit, like a rotate, the only info that changes is the size. Again, another 0.2MB is lost. Then do some red eye removal and we gain back 0.1MB. Very strange. But the EXIF info is retained throughout.

Purple and green blotches with Nikon D700 raws

I'm getting some purple and green blotches (mostly purple) with Nikon D700 raws when using the "Camera Standard" profile. This happens a lot during sunset-ish shots. The problem goes away when I select the "Adobe Standard" the profile.
I just tried ACR 6.3 RC and the problem still exists. is this a known issue?
Would be happy to share a raw + screenshots if needed (currently on a relatively low bandwidth connection)
Thanks,
Kevin

Kevin, please try these:
http://forums.adobe.com/message/2681151

Aperture and Canon 5D with wireless adapter

I have a 15" macbook pro, and I want to get a 20" iMac to do this, if I can, but when I shoot in the studio, I use my wireless adapter on my Canon 5D to transmit my photos to a Mac. Is there a way that I can use aperture to monitor a directory, and display the new photos durring a shoot, so I can review them right away. I can use the canon software when im teathered, but defeats the wireless adapter, and I really love aperture.
Thanks!

Go here:
http://www.automator.us/aperture/
and get the Aperture Hot Folder script.
That should do it.

HT4796 will turbotax transfer from my broken hp laptop to a new mac or do I need to buy turbotax for mac and start over with my pc 2011 turbotax file

will turbotax transfer from my broken hp laptop to a new mac or do I need to buy turbotax for mac and start over with my pc 2011 turbotax file

You'd have to ask Intuit. They might give you a cross-license to download and install the Mac version.

Aperture stripping 8 pixels from Canon Digital Rebel CRW files?

hi,
I just wanted to see if anyone else was having the issue I am. I'm using Aperture with CRW files from a Digital Rebel, which are 3072x2048 in resolution. However, upon import into Aperture, images are listed as 3072x2040 in resolution. Exporting JPGs confirms that the images are only 2040 pixels in height. Converting the same RAW files in Photoshop results in images that are 2048 pixels in height.
What happened to those 8 pixels? It is kind of a pain because the 3072x2040 files are now not exactly a 3:2 aspect ratio...

yeah, I recognize that it's a very small "loss" of information, but it's just a little bit annoying because of the loss of the 3:2 aspect ratio. I just sent some of the 2040 images out for printing so hopefully there won't be an issue there.
I noticed that the crop tool, when you tell it to use a 3:2 aspect ratio, will generate crops that aren't exactly 3:2 pixel-wise. Again, it's very close, but I just feel like there's no reason why it shouldn't be exact.
Thanks for everyone's help! I guess I should start thinking about this as more of a "feature" than anything else...

Aperture and computer unresponsive with photostream

Hello every one, this will be my last ditch attempt with aperture before binning it.
Its been very unstable for me for sometime now many months on both an imac and macbook, updates from apple seem to be making matters worse.
To cap it all photostream seems to kill it entirely. Most of the time it seems to either be processing images or doing something with photostream. Whilst this is happening aperture is either dog slow or totally unresponsive and infact half the time my entire mac seems like its about to melt down.
Aperture as a programme seems to be falling over pretty rapidly for me, I don't know if anyone else feels that way. In an attempt to mitigate the issues I expereince all the time I have given up using raw, because these knock it over, on an imac quad core i7 with 8 gig of ram. Lion certainly has not helped and with photostream compounding it, I am finding productivity with aperture sliding.
IS anyone else having issues with this 'professional' software now?
Yes I have rebuilt the database and library many many times, fixed permissions, done all those things that make no difference what so ever. I repprossed all masters and thumbs before going to be one night and this helped for a while.
Aperture on my macbook is game over really, its just too slow and unresponsive to be considered viable.

Would referenceing be a mistake or might this eleviate some of the issues.
That depends; referencing will help, if you do not have enough free space on your system drive and you can free your disk this way. But you should connect your external drive to a fast port - fire wire, thunderbolt ...
If you on the other hand allready have all the disk space you need, this might may things worse, if your external disk is slow.
You really need to find out, what Aperture is doing; that is why I suggested to show the Activity window and watch the Console Window (Utilities -> Console). The performance you see is very untypical for a moderate sized Library.
I suspect your Aperture LIbrary may be corrupted in some way or your Preferences are faulty.
How to solve such problems is described in this support article.
Aperture 3: Troubleshooting Basics
Try to repair the permissions in your Library, and if that dos not help, repair the library as described in the article.
Post back, if that does not solve the problem.
Regards
Léonie
P.S. I would not change the type of the library to referenced, while there may be a problem with the library that need repairing.

Using IPOD 5g and camera connector with Nikon D70 raw

Hi,
I take pictures in 'RAW and Basic' ie digital negative and JPG on a D70. On the Apple IPOD camera connector page there is a user comment referring to having found a posting giving a correct way of transferring RAW files to IPOD which works. Obviously I am not expecting to be able to see the raw pictures just the basic jpgs. But does anyone know the correct procedure for transferring RAW and emedded basic PG files over to IPOD and where they are stored on the IPOD so that I can recover them later?
Dell Latitude D610 Windows XP

i have a minolta 7d and i used to take pics in raw+jpg figuring that it would save the raw and hopefully show the jpgs. no such luck. i talked to the apple gurus and no one seems to know how to make it look at the jpgs and not just the raw files.
i've played around with everything that i could figure out and to no avail. so now i just shoot in raw, tranfer to the ipod (via usb cord to the camera) and when i get home transfer them to the pc.
p.s. the jpgs are still moved over to the ipod and you can get them when you transfer them back to the puter you just can't view them while on the ipod. if you were to shoot just jpg then of course you would be able to see them.

TS3694 hi i recently updated into ios 7.0.4 now i want to fully restore my ipad to resell but when i restore it it got stuck with apple logo and progress bar with 45% completed as firware file is downloaded using ipad 4 wifi itunes 11.3.8

hi i rescently updated my ipad 4 in ios 7.0.4 and for resell purpose i want to restore my ipad via itunes but it got stuck at apple logo and progress bar of 45% completed i tried it 50 times but it stuck on that exact point for hours i cant able to restore it and had no errors it just like freezes at one point i also uses dfu mode but got stuck at same problem using windows 7 32 bits itunes 11.3.8 ipad 4 wifi please help

My iPhone 5 wouldn't start after I turned it off a few minutes after writing this. It went into recovery mode and I had no choice but to connect to iTunes on PC and restore.
I restored to factory setting first, just to validate my phone was okay. For a second consecutive iOS update, the iPhone 5 did not update smoothly while connected to PC and iTunes - I had to retry two times before the progress bar for the update showed. (The exact same problem with the restart occured when I updated to 7.0.4.)
The good news is that I was ultimately able to restore the iPhone 5 to factory settings while running iOS 7.0.6. I did have a backup from about a month ago lying around and was able to successfully restore with that as well, so the damage done is almost negligible since I had my contacts, notes, mail, etc. backed up to iCloud.
Once I completed both restores, the sync with iTunes worked fine.

I have a Canon EOS T2i Camera and I want to import the RAW images into Aperture. How do I import them as RAW images instead of jpeg ?

How do I import RAW images from my Canon EOS T2i camera into Aperture and have them show up as RAW images and not jpeg images?

See the list of supported raw formats:
http://www.apple.com/aperture/specs/raw.html
The footnote ** for the cameras EOS Rebel T2i EF-S / 550D / Kiss X4** says, that the raw format is only supported with Aperture 3. So you will have to upgrade to Aperture 3, to be able to import the raw from from your camera.
Regards
Léonie

Aperture 3.3.2 no longer imports raw files from OM-D E-M5?

I just upgraded to 3.3.2 and when I try to import raw (ORF) files from my OM-D E-M5, I get a pop-up listing each of the files as having failed to import. In addition, in the Import window I am not seeing thumbnails of each file -- just a generic "ORF" Icon.
Aperture seems to have forgotten how to deal with these files.
Anyone seen this and have a suggestion on how to fix? Or has anyone been able to successfully import these files into 3.3.2?
I am running Mac OS 10.7.4 on a MBP.

Check the version of the Digital Camera RAW Compatibility Update that is installed. Your camera should be supported by update 3.13: The version of the raw support is shown in the About panel: from the main menu bar:
Aperture > About Aperture
Supported by Digital Camera RAW Compatibility Update 3.13
Canon EOS-1D X
Nikon D800E
Nikon D3200
Olympus OM-D E-M5
Panasonic LUMIX DMC-GF5
Sony Alpha SLT-A57
Download the latest from here:
Digital Camera RAW Compatibility Update 3.14
If you have the latest raw support installed, but Aperture does not recognize the format, try to register the raw support for your camera with the launch services db, see this post by Alan Roseman:
Re: Aperture 3 preview of raw file greenish
But also read the following post, that explain how this is supposed to work and to correct the typo in the command
In short: Quit Aperture, open the terminal, paste the follwing text in (all in one single line) and hit return; then reboot the system.
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -R /System/Library/CoreServices/CoreTypes.bundle/Contents/Library
Regards
Leonie

How can I move projects out of aperture and save elsewhere

When I restart Aperture it is continuously busy 'processing' unless I rebuild the library each time; that's time consuming and annoying. I think I probably have one (or more) somewhat corrupted images and I liek to isolate it/them. I though one way to try would be to save e.g. projects somewhere else and then delete from Aperture; repeat until it's OK. Maybe there are better solutions? If not, how do I save parts of the library and bring them back later after finding they are OK?
Thanks,
Alan

Thtat definitely looks like you have a corrupted image somewhere.
If you have the "continuously busy 'processing'" at start-up, then probably some recently imported image is corrupted.
What I usually do to track down the culprit is to defer the generation of previews on start-up:
Press the Shift key immediately after you start Aperture to prevent preview generation for that session. This should take care of the "processing". Then systematically select some of your most recently imported images and try to update the Previews for them (Aperture menu bar -> Photos-> Update Previews). If Aperture stalls/crashes again, then you will know that the culprit is among the most recently selected images.
Inspect these images careful in the inspector (launch Aperture again with the shift key held down) and look if any one of these look suspicious (file format, size, filename or version name). E.g. I once managed to crash Apertue by importing a 2GB file, or b importing a file with invisible characters in the filename.
Remove the suspicous files and see if this solves the problem.
If you have the photo stream turned on don't forget to check the PhotoStream or your MobileMe albums for corrupted images.
To answer your question:
If not, how do I save parts of the library and bring them back later after finding they are OK?
One way to do this would be to export Aperture items (albums, projects) as a new library (File -> export -> Project/album / as new library. This will preserve all edits, keywords, tags, folders, etc.
Later you can reimport this library and merge it with your current library. (File -> Import -> Librar/Project)
Regards
Léonie

Aperture and EXIF information with EOS 300D RAW (.CRW) files

Similar Messages

Maybe you are looking for