Aperture and Nikon D200 raw files

Can anyone tell me if they know when apple will release an update for Aperture to support Nikon D200 raw files.

Let Apple know by sending a polite note to
http://www.apple.com/feedback/aperture.html
http://www.apple.com/macosx/feedback/ (seeing as RAW support is handled by the OS)
DAVE

Similar Messages

Aperture 2 and Nikon D7000 RAW files. Do I need to upgrade to Aperture 3?

I currently have a Nikon D70 with a Nikon D7000 on its way. I want to know if Aperture 2 will process Nikon D7000 RAW files. I searched Apple support and these discussions. I only could find confirmation that Aperture 3 now handles it. But I have not found anything that confirms that Aperture 2 indeed did NOT get an update to handle the D7000 RAW files.
Can someone confirm this?
Thanks.

For future reference, all the cameras listed on the Aperture RAW Support web page that have the double asterisk "**" require Aperture 3.

Nikon D200 Raw files not supported?

Hi,
Recently purchased the D200 and discovered that the Raw files are not supported. Just wondering if it is Aperture or the 10.4.4 that is causing the problems. Anyone else facing the same problems?
Thanks

Hi,
Recently purchased the D200 and discovered that the
Raw files are not supported. Just wondering if it is
Aperture or the 10.4.4 that is causing the problems.
Anyone else facing the same problems?
Thanks
In very simple terms...
In order to add support for various camera RAW files, Apple has to ask the camera manufactures to supply proprietary information about how to process and read the RAW files. Each and every single camera has a different "proprietary process" it must use to handle the RAW file that the camera produces.
So that means that Apple is at the mercy of the manufacturers in order to get that information. Now most manufactures would prefer that you purchase or use their own software to work on the RAW files that their camera produces... it's an extra revenue stream for them. Because of this, it's not hard to imagine that they are a bit reluctant to divulge what is proprietary information that they spent time and money on creating. It's well documented that Nikon in particular is very reluctant about releasing such information.
If Adobe has support for a particular camera that Apple does not, then that means that Adobe has already gone through the trouble of asking the manufacture for the information that is needed, reached an agreement and signed the appropriate licensing contracts, exchanged whatever compensation was agreed upon, and then went to work making the software for ACR so it can read that particular cameras RAW files. As you can imagine, it's a process that takes some time to hammer out... more than likely because it involves more lawyers than engineers!
So... be sure you let Apple know that you would like them to add support for a particular camera, but just as important, make sure that your cameras manufacturer knows that you would like them to allow Apple to support their cameras with Apple's software.
PowerMac G5 Quad 2.5Ghz Mac OS X (10.4.4) 4.5GB RAM, Nvidia 7800 GT, 600GB RAID

ACR and Nikon D800e Raw files

This discussion is actually a follow on to an earlier one where I thought the issue was resolved. I am using CS5 extended 64 bit with WIN 7 64bit and ACR version 6.7. I verified the ACR version checking for updates and was informed I am up to date. According to the ADOBE help site ACR v 6.7 is available to open Nikon D800e raw files. However when I try and open these raw files there is a message that the camera model is not supported. Any help on why the raw files cannot be opened with ACR 6.7 is appreciated.

Thanks Noel - after several hours of experimenting, I found the issue. I use a stand a lone software, Nikon Transfer, to download images to the computer. The software allows me to preview/select, rename, and make simultaneous copies for backup. This software has worked without issue, however when downloading images from the Nikon D800e, it does something to the raw files making them incompatible with ADOBE's ACR and even Nikon's ViewNX 2 software. Now here is the real curosity. When Nikon Transfer is initiated from within Nikon View2 software and not as a stand a lone, it works, and ADOBE ACR 6.7 can read the raw files. Again thanks for the help.

Aperture and Nikon D200

I've bought"Aperture" 2 days ago but i can't open the .NEF files taken with my Nikon D200
What can i do?

Hi Stephen,
You missed the (see camera model listing) which lists the specific models.
Of course, I went to the Aperture page, and I missed it too. It would be nice if there's a link.
The D200 is not supported with Aperture 1.0 or 1.0.1. It will be supported with 1.1, which Apple has noted will be available in March. So, at worst, it should be 23 days or less.
Here's a document which specifically lists the supported camera models:
http://images.apple.com/aperture/pdf/20051207ApertureProductOverview.pdf
If you read through the forum a bit, you'll see 5-10 other threads on this topic.
Cheers.

Elements 11 and Nikon D610 Raw files?

I have Photoshop elements 11 (mac) and have been importing raw files from NikonD70s for years without problem. I recently got a Nikon D610 and now get message saying unbuckle to read file. WHat options do I have. Will upgrading to elements 13 help?Element

Yes an update to PSE13 would work. Or you would need to convert NEF to DNG using the free Adobe converter. You can download PSE13 at this link and try for 30 days before buying - click here for PSE downloads

Bridge CS4 and Nikon 7100 raw files

Well, I use normally Bridge CS4 (that was included in Elements 8) to organize my pics and to edit or open in camera raw of Elements 11. I normaly shot in raw format with my Nikon d90. Now I shoted some pics with the new Nikon D7100 and I can't use Bridge CS4. I tried to update but Bridge doesn't work. So now I'm obliged to use Elements 11 organiser. Any possibiity to update Bridge CS4?

Adobe products use Adobe Camera Raw (ACR) in various ways. Adobe does not work at, or promise, ACR will work in older or legacy versions of anything. Your 7100 is a brand new model and included in ACR 7.4 and 8.0. Whatever Adobe products you use will have to be upgraded to the latest ACR. With PSE and organizer 11, you have to install it and upgrade with Help > Updates to get 7.4.
It amazes me that people will invest so much in a new camera and its new features without giving any thought to the software they use to support the new camera and features.

HT201071 Can I open Nikon D810 raw files in Aperture?

Compatibility of Aperture and Nikon D810 raw files

Yes, finally. The support has been added with the Digital Camera RAW Compatibility Update 5.07 ( http://support.apple.com/kb/DL1757)
on Sep 16, 2014.
This update requires Mavericks at least. 1pda will not be able to install it, if the profile signature Mac OS X (10.6.7) is still correct. It requires a system upgrade.

Aperture suddenly displaying "unsupported format" for Nikon D300s RAW files

I am using Aperture 3.1.3 on my iMac 24 with Snow Leopard 10.6.8.   A couple of days ago I applied an update for Aperture RAW files that was in my update list, even though I don't use any of the cameras involved.
After that update Aperture gives me an "unsupported format" error on all my Nikon D300s RAW files. Every RAW file in the library. I have never had a problem with this at any time over the last 2+ years of using Aperture.
I have tried using time machine and rolling Aperture back to the end of July (my most recent backup) along with rolling back the RAW file plist. I then did a repair permissions, and reimported the photos after this. I have rebooted numerous times. All to no avail. I have not yet tried a library rebuild that would be next if I must.
I use a Referenced library, so I was able to check out individual RAW files with Adobe Camera RAW.   They open fine so there is no file corruption issue.
Any thoughts on what might be happening? Any other file(s) associated with RAW conversion that I might need to roll back?   I do not see any mention of a problem like this when searching the web or the forum (although I may have missed something by not searching the correct terms).
Any help would be greatly appreciated!

The raw camera bundle is /System/Library/CoreServices/RawCamera.bundle
Go to /System/Library/CoreServices with the Finder, locate the the RawCamera.bundle package, select it and then do a File->Get Info on the package. You should have version 3.8.0, that is the latest and the one that you should have downloaded last week. If it is not 3.8.0 stop here and post back what version you do have, something isn't right.
Assuming you have 3.8.0 use the Finder to navigate to /System/Library/CoreServices and then delete the RawCamera.bundle package. The Finder will ask you to authorize the delete.
Then go to Digital Camera RAW Compatibility Update 3.7 download and install it. That will put you back to the last CameraRaw update before this one.
See if that fixes your problem.
As always when messing around with system files it is possible to mess things up so make sure you have a good backup before proceeding, And if any of these instructions make you nervous you might want to hold off doing them.
good luck

PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get Photoshop CS3 error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Adobe Bridge at all. What am I doing wrong?

Hey,
Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs with Bridge or PS CS3.
This method wont involve any additional software purchase now.. right? Am I missing anything. here? Since my final output to my customers are JPEGs any way, wont this work? Will I be at any disadvantage. Am I missing anything. here?
From: ssprengel <[email protected]>
To: charles cash <[email protected]>
Sent: Monday, October 6, 2014 9:49 AM
Subject: PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue created by ssprengel in Adobe Camera Raw - View the full discussion
You can buy it from here:
http://creative.adobe.com/plans
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Can i open and edit nikon d810 raw files in lightroom 4.4

can i open and edit nikon d810 raw files in lightroom 4.4

No. Lightroom 4.x will never be able to open Raw files from the D810.
D810 support has only just been added to the RC version of Camera Raw 8.6. It is never retrospectively added into older versions.
Adobe Photoshop Camera Raw 8.6 RC for CC and CC 2014 Release Candidate | digital camera raw file support - Adobe Labs
Adobe will probably add D810 support to the next version of Lightroom.
Either way you'll have to upgrade to Lightroom 5 to be able to open D810 Raw files in Lightroom.

Issues with Aperture 3.3.1 and LX-5 raw files

Having used my Lumix LX-5 raw files successfully with previous versions of Aperture, after loading some into V3.3.1 this morning, the initial preveiws were fine, and then I watched everyone change from a normal well exposed image to vertially all black with a very dark green colour cast!
No amount of adjustment via the inspector tools wil fix them.
Anyone got any suggestions or solutions?
Thanks

Two things to try:
Force the generation of new previews by holding down the option key while selecting "Update Preview"
If this only happened after you upgraded to 10.7.4 and worked well before, then register your camera with the lauch services database - see this post by Alan Roseman:This solved my questionRe: Aperture 3 preview of raw file greenish, but read the follow up posts (the lsregister command) as well, on how it is supposed to work and how to correct the typos.
Added: if that does not help, try to remove the raw presets from ~/Library/Application Support/Aperture/RawDecodePresets.plist
Regards
Léonie

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files. This works (most times) for my Lumix FZ28.
Adobe DNG Converter 8.3 http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

I cannot see Nikon D610 raw file preview in Finder.

I can see and develop my Nikon D610 RAW file in iPhoto (latest version v 9.4.3) but surprisingly I cannot see them in the Finder (preview, icon preview, etc).
I have tried to fix it by downloading the latest Digital Raw upgrade file (5.0.2 and even 5.0.1) but the setup program refuses to launch arguing I don't have iPhoto 9.4.3 or Aperture 3.4.5
But I have iPhoto 9.4.3. I have even redownloaded it from Appstore and reinstall it but without sucess.
And to add to the complexity, I tested the NEF file with another mac (same OS version, same iPhoto version) and it works well. So I don't understand what is going wrong with my iMac
Any idea how to solve this issue ?
Many thanks in advance for your help
Emmanuel

Problem solved. My iPhoto application was in a folder, which is preventing Digital Raw update from seeing it and therefore preventing the install.
After having put back iPhoto into the main Application folder, I have been able to reinstall digital raw update (5.0.1 and then 5.0.2, as 5.0.1 deals with my d610 and 5.0.2 is the latest version). Once install, I can see the preview in the finder as I wanted

Nikon D800 raw files "unsupported image format".

I've a problem with Nikon D800 raw files "unsupported image format".
I've just upgrade to mountain lion with no success.
also aperture seems the last version
only Nikon software seems to work
thank you
Andrea

Hey Andrea
sorry for the late reply. Have been on some working holidays
My setting is : typ>>>> no
bit>>>> 14
The only information, which is not transmitted is the adjustment level of the AF-finetuning
Good luck and hope it works meanwhile also with your camera
:-)) FJ

Aperture and Nikon D200 raw files

Similar Messages

Maybe you are looking for