Aperture and other Pro Applications ( Final Cut, Motion, DVD Studio Pro )

Hi folks,
I have bought Final Cut Studio a while back, and have been working with all the tools for a while now ( FCP, Motion and DVD Studio Pro ). Recently I also switched to Aperture to manage / capture / organise my digital photographs ( previously I used iPhoto ).
Now I was wondering how I could use the pictures from my Aperture library in Motion or DVD Studio Pro. When I look at the file Browser, I can easily use some iPhoto pictures, but apparently I can't seem to find anything for Aperture.
What I would like to do is use some pictures from Aperture in a Motion project and also include an Aperture album in DVD Studio as a SlideShow.
What would be the best way to do this ? Do I have to export the pictures I want to use ? Or am I missing something ?
Regards,
Stefaan

Stefaan,
Unfortunately, that type of integration between the Pro Apps is not there (yet). It would definitely be a nice feature to have. We should all send feedback to Apple asking for this feature. For now, you will need to export photos for use in these other apps.
Along the same lines, I would also like to see integration with Aperture and the "iLife" programs. Since Aperture will likely replace iPhoto for at least some of us, it would be nice to be able to use Aperture photos in these apps as well.
--Joe

Similar Messages

Please, suggestion about final cut x, dvd studio pro, sound track and color

what to do now, final cut studio cannot exist in same partition of fc x, but at same time fcx does not have anymore dvd studio pro, color and soundtrack, is it replacing the 3 programs? are you really satisfied of it?

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

Major Problem with audio from Final Cut to DVd Studio Pro

I am posting this problem again because no further responses have been received regarding my first post. I purchased an MR-HD100 Firestore device from Focus Enhancements. When I use clips from it alone or with other clips created by digitizing from min DV tape on a sequence or timeline the audio works fine in Final Cut. When I import any type of file and believe me I have been trying all kinds of suggestions and wasting almost a dozen DVDs. Whether it be a Final Cut QT file, going straight to compressor and producing an MPEG-2 file and a dolby audio file .ac3 importing them into DVD SP and making the adjustments that MR. Harbsmeier suggested DIAL NORM at -31dbfs and COMPRESSION MODE to NONE, as well as the suggestion to make an aif file with the audio and importing it into DVD SP as well as the video. I get the same result with every try, the clips made with the firestore are so low you cannot hear them. NOTHING WORKS!!!!. And yes I have tried making a DVD with just digitized footage and yes it turned out fine. I called Apple support today and that gentlemen basically told me I am out of warranty so phone help was not available. However, he made a suggestion of changing sequence presets in Final Cut which has now developed into another problem. I have messed up my settings so bad I don't know where I am I can't LOG & CAPTURE in the manner I used to ???? Could someone please advise as to why this problem exists and the correction to resolve it. I do not understand why the audio works fine playing the sequence on the timeline in Final Cut. It plays fine after making a Final Cut QT file. AND it plays fine in simulation mode in DVD Studio Pro. However after you burn a DVD the audio from the firestore clips are not to be heard unless you crank up the speakers or TV to it's maximum level and you can barely make it out. PLEASE PLEASE PLEASE HELP ME Projects are stacking up and was really hoping to go tapeless

Try building the project to your desktop and then open the Video_TS in the Mac DVD player application.
How does it play/sound? This application is the best way to see and hear how your burned DVD should play vs. just using simulator and burning.
Just to clarify- are you taking your FC QT file into Compressor and creating a MPG-2 and AC3 file or are you bringing your FC QT directly into DSP?
What codec are you exporting from FC? ProRes422, DV, H264?
Open the FC QT in QT and apple+I to see this.
What does it say for audio?

How to import subtitles made with Final Cut in DVD studio Pro?

Hello!
I made subtitles for a movie directly on a track of my final cut timeline. How can I import now this into DVD studio pro to make an independant subtitle track?
thank you.

DVD Studio Pro can work with STL subtitle files. they are nothing more spectacular than a plain text file.
There's a ton of information in DVDSP's online manual, under the Help menu bar item.
search that pdf for "Creating an STL Format Subtitle File".
This file can be configured to display when the user wants to see it or made permanent with the "Force Display" option.
If you export your FCP Timeline the subtitles on it will be burned into the video permanently.

HT6114 I want to re-install Aperture and make updates to Final Cut Pro on my MAC ?

I want to re-install Aperture and to update my Final Cut Pro software, but when I go to install or update I get an error message saying I need to install the latest version of MAC OS X 10.9. I currently have version 10.7.5 installed but when I go to do a software update it tells me that my OS X software is up to date.
What do I need to do to fix this problem?

Download Mavericks via the App Store.

How can I reinstall Motion/DVD Studio Pro using my new serial no.

I used to have my office copy of Motion on my computer. Now that I got my own I want to reinstall it. But whenever I did that I still have the same Motion/DVD Studio Pro as was installed with the older serial no.
How can I get rip of this old serial no so I can use my new serial no?
Any help will be much appreciated.

http://docs.info.apple.com/article.html?artnum=303184 Trash the files... then re-enter the serial number with new one when asked.
Jerry

Converting VHS and other Analog into Final Cut Pro

Hello,
I've taken it upon myself to archive some old home videos of a deceased young cousin of mine. The video is on VHS and getting old and I want to put it on DVD for her parents, and then "Print to Video" on DV for a new master hard copy I can use for my personal archive.
I bought a Canopus 300 converter, plugged it into my PowerMac G5 via FireWire, and I can now see the footage on my Mac.
What I can't do, is seem to find it in my "Log and Capture" window for Final Cut Pro.
Does anyone have any suggestions?
I also thought about looping it to a DV camera and dubbing it, then having this footage with a new TimeCode and then capture it into Final Cut Pro.
My first priority is getting this video preserved in the best quality video possible (it's already not so good to begin with).

What I can't do, is seem to find it in my "Log and Capture" window for Final Cut Pro.Does anyone have any suggestions?
You must set your capture settings to Non controllable device in order to capture from the converter and use Capture Now.
I also thought about looping it to a DV camera and dubbing it, then having this footage with a new TimeCode and then capture it into Final Cut Pro.
If your camera hace analog inputs you can do that. This way you'll have a safe copy of your footage. Using the first option, you can make some basics edits and corrections before transfering to the DV, what means cutting some "floo and sky" shoots !
Hope that helps !
Alberto

Is it possible to export Final Cut Pro X or .MOV to DVD Studio Pro (Final Cut Studio)?

Is it possible to export Final Cut Pro X projects or .MOV to DVD Studio Pro (from Final Cut Studio v.3)? I'm using the free trial of Final Cut Pro X and later acquired a copy of Final Cut Studio (FCP 7, Compressor 3.5, DVD Studio Pro 4, Color 1.5, Motion 4, Soundtrack Pro 2).
I don't like the default DVD export in FCPX, so I would like to do it on DVD Studio Pro. Is it possible to export the project or the final .MOV file to DVD Studio Pro?
Additionally, can I use unfinished FCPX projects on FCP7?
Is it possible to export from FCPX to Compressor 3.5 (Final Cut Studio)?
Feedback would be greatly appreciated. As of this post, I have about 13 days left on my FCPX trial. Or would it just make sense to just use Final Cut Pro 7, since I have a permanent copy of it?
Thank you.
P.S. Where would be the best place to store projects or any other file related to Final Cut Studio or Final Cut Pro X? My MacBook Pro has 320GB built in storage (only 60GB available), and I have a 1TB external hard drive.
What is best to store on the Macintosh internal hard drive?
What is best to store on the external hard drive?

Yes you can make DVDs in DVDSP using video exported from FCPX.
There are some apps that will translate between X and 7- that said I would highly recommend not going back and forth as the translations are not 1:1 perfect.
I would recommend storing all Events and Projects on the External drive.
Compressor 3.5 will not accept exports directly from FCPX- you'll need Compressor 4 which is $49.
Totally up to you whether you want to make the jump to X. 7 is an EOL'ed program, meaning there will not be another version of that application. Final Cut Pro X is the version being actively developed now.

Sync Issues and Audio Drop-out from FCP to DVD Studio Pro

I have edited a piece in FCP 5.1.4 and all audio/video is in perfect sync. I have been using this program for several years with no issues, until now. Upon exporting with compressor and importing into DVD Studio Pro, the audio is out of sync by 15 seconds and after that first 15 seconds there is simply NO audio, period.
Any ideas? Please send the calvary...tight deadline and the hanging rope is getting shorter and shorter by the minute!
Thanks

Could be something got corrupted in DVD SP (preferences). I have had my audio act strangely and playback getting bogged down. Repairing permissions and deleting prefs works for this one for me. Did you do any recent upgrades to the OS or QuickTime?

FCP Pro Res Super 16mm -- Compressor -- DVD Studio Pro (Nightmare Workflow Critique)

Hello,
I figured I post here rather than the DVD Studio Pro forum; I've posted on Creative Cow as well but haven't gotten any responses yet.
Before I mention my problem, I'd like to mention that I've tried several types of compression methods and bitrates and unfortunately, my disk still freezes in my player, generally around the same area.
(I have two, minute long clips with Smoothcam there).
I'll try to be as specific about my work-flow as I can and I've posted the photos of my FCP and Compressor settings below.
30 Minutes. Super 16mm.
2K DPX Scans -- > Graded In Color --> Pro Res 4444 23.976 --> Sent To Compressor --> Mpeg 2 + AC3 --> Build & Format With DVD Studio Pro
I set blue compression markers at the start of each Smoothcam clip.
I've recompressed my footage without Smoothcam as well - with the same end result.
I've sent my timeline to Compressor and used both the 5.5-7 VBR setting and the 6.5 CBR settings (with everything under Frame Controls set to the highest quality).
(I've also used the 6.2-7.7 built in settings with the ninety-minute high quality preset).
I am using Sony DVD-R disks. 16X/1X. When I play them in my PS3, the film freezes at different points in the first two-three minutes - then skips ahead exactly to the same point in my film - about halfway.
I've set Chapter markers and it skips to the halfway one; from there it plays fine.
1. I wanted to ask if I should maybe export my entire sequence first through FCP (an .mov file) and try Compressing that?
(I've done this and the result is still the same)
2. Should I set it to Pro Res 422 HQ first?
(I've done this and the result is still the same)
3. Perhaps I should just try to Compressor with the 90Min-HQ setting without changing anything?
(I've done this and the result is still the same)
4. Should I remove the Smoothcam?
I'm currently compressing the entire sequence void of all Smoothcam.
When I bring the files into DVD Studio Pro, I see under preferences that Studio Pro also has VBR settings. Do those have any effect on my DVD encode? There is no CBR there - only VBR set from 5.5-7.
5. Is there anything I'm doing wrong with regards to my workflow? There are several options that may be causing this; I'm not sure if its the progressive footage to interlaced standard definition disk, or modifying field dominance, gop structure, etc.
Any help would be greatly (that's greatly) appreciated.
Thanks!
-Boris

My first impression is you're trying to make this too hard...
You have a high quality timeline which is downconverted to 1080, no problem. Once rendered, SmoothCam
should not represent a problem. If anything, SmoothCam will reduce the sudden movement that can cause problems. Any scenes where you have a high rate of change per frame (like in an explosion or a background of leaves flapping in the wind) should be marked with compression markers.
Export as a QT movie using sequence settings (include markers for DVDSP) so you have a completed source file for compression. I'm not aware of anything that will improve the quality beyond what is in the timeline, so current sequence settings are fine. Test this for playback issues.
If you are having playback problems with the sequence after export and compression, the most probable cause is excessively high bandwidth requirements. Try using the DVD: Best Quality 90 minutes preset. It generally produces a very good quality product. Any attempt to increase the quality will likely increase the bandwidth requirements that are the probable cause of the skipping.
While Sony is a big name, their DVD substrate is only mediocre. If you think the substrate is a problem, switch to Verbatim or JVC/Taiyo-Yuden.
If you are dissatisfied with the quality of the Compressor output, look into the Cinema Craft encoding products.
Hope this helps.

Library templates for motion, DVD studio pro, Live type etc

Hi
I wanted to ask how I copy (from one computer to another) over the libraries of templates for the suite of programs in Final Cut Studio 2. I no longer have the discs and wanted to ask where in the library and what files I need to carry over to be able to see the templates etc again for these FCP Studio programs.
Hope you can help.
Cheers and thanks,

I no longer have the discs...
Do you intend to try and use the Migration Assistant to copy the applications?
If so, it won't work. Final Cut Studio places many files at system level that are vital to its operation. Quite a few are in directories that are normally invisible to the user. These files do not copy across correctly or at all.
While the media is mostly in the Library/Application Support and Users/Shared directories, many of those invisible system files do not have names that obviously associate themselves with FCS.

FCP Studio won't install FC but will install Motion, DVD Studio etc.

I'm installing Final Cut Studio 2 and when going through the installation process, there is no option to install Final Cut yet DVD Studio Pro, Motion, LiveType etc. are able to be installed. I previously had a version of FCP7 which was uninstalled (long story short I was borrowing it) so that's the only issue I can see, but I completely removed any lingeringfiles. All that is said for Final Cut, Color, and Compressor is "Skip". Help would be greatly appreciated as this is preventing several pertinent projects from being carried out.
Thanks

Go here:
http://www.digitalrebellion.com/fcsremover/
and download the free FCS Remover,
Run it.
Re-Install FCS 2.
Your system is telling the installer it already has FCP...

Buy Final Cut Studio 2 for DVD Studio Pro? Pro & Cons of DVD Studio Pro?

I am thinking of buying Final Cut Studio 2 because it includes the DVD authoring software DVD Studio Pro. iDVD uses automatic settings that are hard if not impossible to alter and so some DVDs are authored with very poor bit rates.
1. Is it possible to change the bit rate manually in DVD Studio Pro so the best Quality DVD can be authored?
2. Is is possible to change the audio from PCM (which takes up a lot of DVD space) to AC-3 in DVD Studio Pro, so picture quality is improved?
3. Is there a way to buy DVD Studio Pro as a separate software package and use it with Final Cut Express?
4. Generally what other options for DVD authoring with Mac are there besides iDVD and DVD Studio Pro?
5. Is DVD Studio Pro a good piece of software or are there any particular faults?

1. Yes, but you would use Compressor for your encoding instead of DVDSP.
2. DVDSP will only encode to AIFF, Compressor will allow you to encode audio to AC3.
3. Negative. DVDSP is only available as part of Final Cut Studio 2.
4. You could try using Roxio Toast.
5. DVDSP gets the job done for me. I think it works quite well.
For a good explanation of how Compressor and DVDSP workflows work within Final Cut Studio, I'd recommend you take a look at DVD StepByStep

IDVD and DVD Studio Pro

Is there a way to import a theme from iDVD into DVD Studio Pro? I want to use a theme on iDVD called Revolution, but in iDVD it only has one drop zone for pictures. I have seen this theme used with multiple pictures so there has to be a way to do it. I was wondering if you can somehow get that template into DVD Studio Pro for more customization options.

Importing iDVD Projects and Themes:
DVD Studio Pro 4 can import projects from iDVD 3 and iDVD 4. You can import an iDVD theme by using the theme in a project within iDVD and importing the project into DVD Studio Pro. When creating the project within iDVD, you do not need to use the final assets or make a complete project.
Note: DVD Studio Pro will not import projects from iDVD 1, iDVD 2, and iDVD 5.
In general, iDVD needs to be installed on the same system as DVD Studio Pro. An exception is if you import an iDVD 4 archive project.
To import an iDVD project or archived project into DVD Studio Pro:
1 Do one of the following:
• Choose File > Open.
• Press Command-O.
2 Locate and select the iDVD project or iDVD 4 archive project in the Open dialog, then click Open.
DVD Studio Pro imports the iDVD project.
About the iDVD Project Import:
When DVD Studio Pro imports an iDVD 3 or iDVD 4 project or iDVD 4 archive project, it has standard locations it looks for to find the assets and themes used in the project. This is especially important if the project uses custom themes.
The standard locations that DVD Studio Pro uses are (in this order):
• iDVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically configured by your system administrator for this purpose. (This is not the same as having a server networked into your computer.)
• iDVD application bundle: This is the iDVD application file that contains the default theme elements.
Note: When you create an archive project in iDVD 4, you can choose to include the themes and encoded files. For the best portability, you should include both options. This results in a larger archive file, but ensures you can take the file to any DVD Studio Pro system and import it without missing assets. If you do not choose to include the themes and encoded files in the archive file, those assets must be available in one of the standard locations. If your project will have automatically-created chapter index (scene selection) menus based on markers embedded in the video, it can be easier to create these within iDVD prior to importing the project into DVD Studio Pro. This ensures the chapter index menus use the selected theme’s background and include arrow buttons to navigate between the menus.
Important: To ensure all iDVD menu elements import correctly into DVD Studio Pro, you must navigate to each chapter index menu within iDVD before saving the project. This is also true for any menus you add to your iDVD project by clicking the Folder button.
Issues With Importing iDVD Projects:
There are some issues to be aware of when you import iDVD projects:
• If you import an iDVD project with DVD-ROM content, DVD Studio Pro does not update the settings in the Disc Inspector’s General tab to reflect the DVD-ROM content. You must manually select the DVD-ROM layout and choose the folder to include.
• When you create a slideshow in iDVD, you can add arrow buttons to each still to provide viewers with an additional method of jumping to the previous and next stills. These arrow buttons are not imported when you import an iDVD project into DVD Studio Pro. The viewer must use the Previous and Next buttons on the DVD player’s remote control to jump between stills.
• The button highlights used in iDVD may look different when imported into
DVD Studio Pro. In most cases, the text in the buttons is set to be included in the highlight. Additionally, buttons that use an underline in iDVD will not have an underline when imported into DVD Studio Pro.
• When you import an iDVD project, you may find that the button that is highlighted by default on some menus changes. During the project import, DVD Studio Pro numbers the buttons on each menu and highlights button 1 by default. You can assign any button on a menu to be the default button in the Menu tab in the Menu Inspector.
• If you import an iDVD project that contains a drop zone configured as a slideshow and has multiple slides assigned to it, DVD Studio Pro only shows the slideshow’s first slide in the drop zone.
Source: +DVD Studio Pro user manual.+

Compression quality: iDVD vs DVD Studio Pro vs others?

I am merrily editing along in FCE, and looking to eventually compress and burn onto DVD. Since I can use all the quality I can get, and don't have spare money (so what else is new?), I am wondering about the differences in compressing software. Is there a visible difference in the final product using DVD Studio Pro vs iDVD? Is there something else out there that is better than iDVD but doesn't cost as much as DVDSP? Any opinions or experience welcomed!
Thank you!

If your project is under an hour, iDVD will give you very satisfactory results (use the Best Performance settings).
You can create an up to 2 hour movie with iDVD but personally (with Best Quality), I think the quality begins to slide off a bit over an hour
DVD Studio Pro, with Compressor, gives you many more compression options. Compressor has lots more compression pre-sets and you can go in and tweak bit rates, single or double passes, etc. You can do that inside DVD Studio Pro as well. Overall, Studio Pro just gives you a lot more options and control.
Roxio Toast is a relatively cheap (around 80 bucks Cdn) piece of software that will compress your FC movies. You are way limited in terms of things like menus and chapters but compression wise it does a fairly nice job ... again, you don't have the versatility of iDVD. With Popcorn, it will allow you to cram a big movie onto a single layer DVD but the quality begins to hurt
Personally, no matter what you use, two hours is the reasonable quality limit for a single layer DVD

Aperture and other Pro Applications ( Final Cut, Motion, DVD Studio Pro )

Similar Messages

Maybe you are looking for