Aperture and Printing with a Canon Selphy dye-sub

Hi everybody,
I want to use my Canon Selphy CP510 (dye-sub) printer for prointing from Aperture. I was used from Photoshop to disable color management in the program, but make use of the color management in the printer driver. The printer driver came without any ICC-profile, but by this way, prints became excellent.
In Aperture the only way seems to be to set (in the Printing Windows) Color Management to "System Managed". By this way, color become dark, dull, and there is also a light color cast.
I found in the web a ICC-profile from am CP330, but nothing changed, when I selected this profile for printing.
Do you have experience with this printer (or any Canon Selphy printers)?
Someone told me to let make a color ICC for this printer by professionals (send a print of a certain color traget to a studio with a special scanner in order to produce a color profile)
regards,
Sandro

I would suggest running the ColorSync Utility in Applications/Utilities. Click the Devices toolbar button and click on your printer in the Printers section of the list. That will display what profile the OS is using for the printer. Even if the printer did not come with a profile, the OS will assign a generic profile to it.
Try selecting that profile as the printer profile to use in the Aperture print dialog. I think that might be similar to what you were doing in Photoshop.

Similar Messages

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

How to print wireless? I have a MacBook Pro with Mountain Lion and printer is a Canon MP620

http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp620#Wireless_Help

I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS. If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

What are the settings in Aperture to work with a Canon 9000?

What are the settings in Aperture to work with a Canon 9000? Canon website says Aperture is not supported. Is it True?

Do you mean the Canon PIXMA Pro9000 printer?
If so, does this help?
https://discussions.apple.com/thread/3681934?tstart=0

Cd printing with a canon pixma ip4200 + photoshop/illustrator

Sorry if im posting this in the wrong forum.
I just recently bought a canon pixma ip4200 printer mainly for its cd printing function.
the software that comes with it is very basic. I have photoshop and illustrator, but i cant get the print to allign properly through these 2 programs. i can only succesfully print with the canon software.
i was just wondering if anyone here uses the same printer with photoshop/illustrator and can get 100% allignment on the print.
Ive played with the settings within photoshop/illustrator, but i dont want to keep wasting cds trying to perfect it.
failing that, does anyone know of any other good software for cd printing.
i recently installed a demo of Disc Cover from MacWorld magazine, but wouldnt want to commit to buying it until i was certain it worked properly.
Cheers

http://discussions.apple.com/thread.jspa?messageID=728440&#728440
http://discussions.apple.com/thread.jspa?messageID=729785&#729785
http://discussions.apple.com/thread.jspa?messageID=1992804&#1992804

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8?

I have an iMac running OS X 10.8.3 and have connected an Epson Workforce 2540 printed that is allegedly Airprint enabled. I can connect and print with a USB cable but can't connect via Airprint. My colleague running 10.7 can. Is this a feature of 10.8? Any ideas for a fix?

iOS devices use AirPrint to connect to a supported printer. OS X will use Bonjour to locate and connect to the same printer.
With the Epson connected to your wireless router, when you open Print & Scan and click the plus button to add, does the Epson appear in a small box with a heading of Nearby Printers?
If not and a window appears showing Default, Fax, IP and Windows in the toolbar, do you see the Epson with the Default view selected?

Report previews and prints with strange characters

I have a custom XI application which uses CCrystalReportViewer11 (C++ wrapper around ActiveX control) to preview reports. This works for hundreds of installations, but for one the text is displayed and printed with strange characters. If the customer exports the report the characters are displayed as normal. What could be wrong?

More than likely, it's a printer driver issue. It may even be that there is no default printer driver installed. Also, see if setting a different default printer driver helps. You can also set the "No Printer" option in the report by opening it in the designer and going to the File menu and selecting "Page Setup".
Ludek

Unable to print with my Canon PIXMA IP 4700 and JetDirect network appliance

After many tries I decided to post my question.
I have a Canon PIXMA IP 4700 connected to the network with a Jetdirect 175X box. So I tried to add a new printer with a "HP Jetdirect Socket" port. I have previously installed the driver from the official website. The test page is staying on the spooler.
I also tried with LPD port (supported by the Jetdirect box) and IPP but nothing is working.
When the printer is directly connected with USB, it's working fine. Printing from my others Windows computers is working fine too since many months.
Thank your for your help.

Hello and welcome to Apple Discussions.
Your problem is being caused by the Canon driver. It cannot be used when the printer is connected to the USB port of a 3rd party print server, or if shared by Windows.
The solution is to use a driver like Gutenprint or PrintFab. Gutenprint is preferred because it is free (it ships with OS X) however the iP4700 is not listed as a supported model. The iP4600 is listed so you could try selecting this model in the Print Using menu (shown as Canon PIXMA iP4600 - Gutenprint v5.2.3). If the iP4600 Gutenprint driver does not work that well then you could look at using [PrintFab|http://www.printfab.net] which does support the iP4700. It costs €49 but there is a 30 day trial so at least you can try it before committing to buying.
Another option would be to use a Airport device, like the Express, instead of the Jetdirect print server. With the printer connected to its USB port you can then use the Canon iP4700 driver on the Mac.

When I make a Book in Aperture and print a PDF proof version, all the modified photos (marked with Badges) are totally distorted. What is causing this? All other - non-modified photos - appear to be fine.

When I make a Book using Aperture 3 and print a PDF proof version, all images that have been modified within Aperture are distorted in PDF form. All other images appear ok.

As if only the corrected layer would have remained on the photos.
So the geometry of the pictures is correct - they are not skewed or something? Only the colors and intensities are wrong?
. Only in printing when it is converted to PDF file some photos are unrecognizable.
Is it the printed pdf or the pdf viewed on the screen? If it is the printed copy you need to fix your print settings.
Does Aperture give a warning, that the high resolution images are not available?
We had some cases of books not being able to be printed, and that was due to a broken reference to the original files. Only the book could not access the originals, all other parts of Aperture could. To check for this, try to add one more adjustment to one of the images in question. Is it possible? Are the edits reflected correctly in the pdf of the book?
We were shooting with 3 cameras, Lumix5 shooting RAW, Cannon 100 shooting JPEG and SONY alfa850 shooting RAW.
Have you tried to reprocess the raw of the edited images? (Photos > Reprocess Raw)
Also try, to remove one of the images from the book and to add it again. That usually helps, if Aperture has lost the connection to the originals used in the book.
If you no have done so already, repair (and if necessary rebuild) the Aperture library.
See: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
Regards
Léonie

Anybody has any problems with installing and printing with canon lbp6650dn?

hi,
i bought a new i-sensys lbp6650dn and i am trying to make it work with my macbook 10.5.8. the installation cd that comes with it does not work with mac. i downloaded the latest drivers from canon's website, and could add the printer to my list.
computer's connected to the printer with USB. both the computer and the printer show no error, but whenever i try to print a document it starts printing jumbld letters and numbers that look like programme codes. moreover, it prints around 20 pages for a 1-page document. does anybody know what the problem might be? i am not sure whether there is something wrong with the computer's settings or the printer's. it's the first time installing a printer is giving me such a hard time. any help would be much appreciated.
thanks!

Try reseating your memory. Sometimes this occurs when the RAM is not seated all the way in the slot.
You could also boot from your 1st install disk while holding down the D key. Then run the diagnostics on your MacBook.
Message was edited by: First Magus

I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit

Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq

Trouble connecting/printing to Canon copy machine and printer with iMac

I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
Thanks so much!

I'm having trouble connecting to/printing off of my new imac, to the network(wireless) printer at work. The printer is a Canon iR advance c5051. When I try printing it keeps giving me a message stating that I did not use the correct password or ID, 15513. It shows up in my computer's printer cue, but does not show up on the actual Canon printer's cue. The print driver has already been installed, so I'm not sure what's going on. Any help/suggestions would be greatly appreciated!
Thanks so much!

Borderless printing with iPhoto/Canon iP8600?

Does anyone know if it is possible to print borderless photos with iPhoto? I have a new Canon iP8600 that features borderless printing, but I've not been able to get it to work with iPhoto. The paper options for borderless printing are there, but the borderless popup dialog brings up a single greyed out option.
Any ideas from someone who has this printer (or the 8500)?

The post must have expired. Here's a step by step process that works fine with my Canon i850 and Epson R200. It's pretty generic.
<blockquote?<i>Steps for printing 4 x 6 prints from iPhoto:
1 - crop the photo to 4 x 6 beforehand in iPhoto.
2 - in Page Setup select your printer, proper page orientation and paper size as 4x6 or 4x6 borderless
3 - click once on the picture you want to print to make sure it's selected.
4 - now click on the Print button in iPhoto.
5 - in the iPhoto print window, select your printer again, select Style = "Standard Prints", Size= 4x6 and click on One photo per page.
6 - click on the Print button.</block

Aperture and Printing with a Canon Selphy dye-sub

Similar Messages

Maybe you are looking for