Aperture Audio File Playback

In Aperture 3.1.1, I am unable to open the attached audio files from my 1D Mark IV. They seem to be attached to the photo and not a separate .wav file. In Adobe Bridge, I am able to open these files as they are a separate .wav file. I talked with Apple today and they did not seem to have any answer either. Any suggestions?

You're probably playing back with logic set to a lower sample rate than it was when you recorded the piece, TRY getting your US-122 out and plug it in. It will probably set the sample rate back up (probably to 48khz) and the pitch/speed will follow.

Similar Messages

Aperture Audio Files?

In the tutorials for Aperture, there are audio files amongst the library. Why are they there? Did the person record JUST audio from their camera and import it from there, or just take audio files from their computer and import them? Why are they there? I can understand the video files in the library, but not the audio. Can someone explain, please?

peter62709 wrote:
In the tutorials for Aperture, there are audio files amongst the library. Why are they there? Did the person record JUST audio from their camera and import it from there, or just take audio files from their computer and import them? Why are they there? I can understand the video files in the library, but not the audio. Can someone explain, please?
there is "Sample" & "Theme" music in the pull down menu when you make a slideshow. to access them select the "Display Audio Browser" (icon with the music note) first, preview them by hitting the play button.
you can also record audio from a video camera & save it as a track or use the existing audio from a video clip.
victor

Slow audio file playback

I'm sure this has been addressed somewhere in this forum before, but my keyword searches have yielded nothing. It's a pretty straightforward problem, at least I think it is:
I'm running Logic EX 7.1.1 on a brand new 12" PB (1.5gHz, 512 ram, superdrive) without an audio interface - just playing through the built-in audio card. This computer is a replacement for my old G4 400 PCI, which ran Logic with no problems whatsoever. I do have a TASCAM US-122 audio interface, but I'm in a hotel room right now, so I don't want to drag it out and plug everything in.
The issue I'm running into is that any audio file I drag in to any project is playing back about a whole step below where I recorded it, and slowed down by a comparable amount. But, any and all of these audio files (WAV and AIFF) play back just fine in any other audio program - I've tried QT, iTunes, Audacity... no other app has any problem. Again, this is a problem I didn't even run into on the old G4 400...
Any ideas what's going on here?

You're probably playing back with logic set to a lower sample rate than it was when you recorded the piece, TRY getting your US-122 out and plug it in. It will probably set the sample rate back up (probably to 48khz) and the pitch/speed will follow.

Audio file resets to beginning when I go to another app.

Just upgraded to Ipod Touch 2G from Ipod 5G Video. I've searched these forums for a similar problem to no avail.
I have imported an audio CD with no problems so far. My difficulty is that when I stop an audio file playback (or any music file for that matter) and go to another app or outside of the playlist, the file resets to the beginning. Not a problem on a 3 or 4 min music file but a 1 or 2 hour audio file can get very frustrating. I didn't have this problem with the IPod video, I could stop and play games or anything without losing my place in the file. Is there a setting or something to correct this?

Hello and Welcome to Apple Discussions.
Have a read of these articles:
http://oakroadsystems.com/genl/itunsabk.htm
http://aldoblog.com/audiobooks/itunes/importing-audio-cds/
audio books from Audible or iTunes should do this right away.
If the files are from another source, right click on them and choose Get Info, then check the "Remember Playback position" box. If you then change the file extension in Windows to .m4b they should show up in the Audiobooks section of iTunes too.
regards
mrtotes
Message was edited by: mrtotes

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

I open a file - playback - the audio is there - doesn't appear in timeline, but I hear it, after 1 edit, the audio disappears. I have to reboot to get it back then it happens again. All suggeswtions welcome. Thank you, Randy

Is your Premiere Elements 12/12.1 running on a Windows 7, 8, or 8.1 64 bit computer or a Mac computer?
What is the brand/model/settings of the camera recording your video?
Windows 7 64 bit PC
Footage taken from DVD through Adobe Premiere Elements
Are you sure about the Frame Width and Frame Height that you gave 720 x 484? Did you mean 720 x 480?
Yes, my err. 720X480
For the Frame Rate, was it really 29.97 frames per second and you rounded it off to 29 frames per second? Or,
is the frame rate really 29 frames per second?
If the properties that you just posted are representative of your source file, what project preset did you or the
project set for the project preset? If you are not sure, please tell us the readings for Editing Mode, Timebase, Frame Size,
and Pixel Aspect Ratio under Edit Menu/Project Settings/General.
Still having problems - haven't been able to edit project.
Thank you for your help.
Randy Klein

I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

WMA Audio files not compatible with Aperture 3?

Hi,
I just bought a Olympus WS-400S Digital Voice Recorder, to record audio for my audio slideshows that I will be using Aperture 3 to make, I cant seem to import these files into iTunes either.
Is Aperture 3 compatible with WMA audio files?

Thomas Photo wrote:
Hi,
I just bought a Olympus WS-400S Digital Voice Recorder, to record audio for my audio slideshows that I will be using Aperture 3 to make, I cant seem to import these files into iTunes either.
Is Aperture 3 compatible with WMA audio files?
Hi Thomas,
Does not look like it....list of compatible formats is here...
http://support.apple.com/kb/HT4025
Sincerely,
K.J. Doyle

Double playback of audio files after publishing

Hello,
I'm having an issue with audio playback. Once I publish the project, the audio files play back double, with the second one starting about 3 seconds after the first. If I pause the project, one of the audio files keeps playing. I removed the auto play function, but no change. I would greatly appreciate any tips if anyone has experienced this before.
Thank you!

Hi Anjaneai, Thanks for the response.
I don't have any text captions in this project, the entire thing is from PowerPoint, where the audio files worked perfectly fine. I also checked the use count, everything reads as "1"... I also tried to begin from scratch with just one slide and one audio file, and the same thing happened. I'm beginning to think my audio files are corrupted. (However, they play fine in itunes and powerpoint). I converted them from mp4 > mp3 with an online converter... might just be the problem! I'm going to download a trial of premier and see what happens with that!
Thanks for the help,
Jaime

Sequantial playback of audio files

Need help in implementing sequential playback of sampled audio files.
The task is a simple word-based speech generation; got a number of audio files and a need to play the certain ones in the certain order after clicking the button with a possibility of repetitive playback.
I would extremely appreciate a possibly detailed explanation, as I'm not that experienced in Java :)

For a simple solution look into
http://java.sun.com/javase/6/docs/api/java/applet/Applet.html#newAudioClip(java.net.URL)
and
http://java.sun.com/javase/6/docs/api/java/applet/AudioClip.html
You don't need to create an applet to use these.
#

Sequential playback of audio files

Need help in implementing sequential playback of sampled audio files.
The task is a simple word-based speech generation; got a number of audio files and a need to play the certain ones in the certain order after clicking the button with a possibility of repetitive playback.
I would extremely appreciate a possibly detailed explanation, as I'm not that experienced in Java :)

For a simple solution look into
http://java.sun.com/javase/6/docs/api/java/applet/Applet.html#newAudioClip(java.net.URL)
and
http://java.sun.com/javase/6/docs/api/java/applet/AudioClip.html
You don't need to create an applet to use these.
#

Adobe Audition does not playback any audio file. He opens it but does not react on the play key.

Adobe Audition CC does not playback any audio file. He opens it but does not react on the play key. It is after use audio hardware usb wi-fi headphone and return to build-it out. The program don't react now.
I see problem:
I am unable to get playback at all in CS6 on Mac. The play button or spacebar will not move the playhead or make sound come out of the foamy things with the magnets. The play button toggles back and forth between green and white, but it isn't working. This is true in both multi track and waveform view.
Anyone have ideas on what the issue could be? Thanks!
Some Info:
MacBook Pro 2.2 i7, 16GB RAM, 512GB SSD
Mac OS 10.8.3
Audition CS6 5.0.2 Build 5
and reply:
Best bet would be to go into Preferences > Audio Hardware, verify your input and output devices are correct, and probably switch your Master Clock to the opposite setting. If that fails, we can continue troubleshooting.
I have the same problem as the author writes. But these actions do not help

Unfortunately I believe that requires purchasing the new version, and I do
not have budget approval for such a purchase.
On Tue, Jan 27, 2015 at 11:34 AM, Charles VW <[email protected]>

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

I purchased a iBook G4 with OS 10.5.6. I imported .mov files (shot in High Definition) -- I hear audio in playback but no picture. What's wrong?

What version of iMovie is this? Where did this media come from? It's probably in a format or codec not supported by your computer.

Why can't I playback Sonority Recorder audio files?

I have transferred audio files from my Olympus Voice Recorder DM-420 to my iMac and would like to use Sonority application to playback. IMac will not play the audio files. Any ideas as to why? Thanks in advance...

Yes you can merge two audio regions
Simple way:
Create two audio tracks...
Place audio region 1 on 1st Audio track
Place audio region 2 on 2nd Audio track
Press play and adjust levels/pan/fx etc in mixer.....
Select all regions using Shift and Left click on each region
Right / Control Click on one of the regions and from the popup menu choose Bounce & Join > Join or press CMD + J
Now in the next dialog box choose Stereo or Mono mixdown
Mixdown done... Single audio file now found in first track with mixdown of both tracks....
(Rename track.region to taste)
Bear in mind track volume /pan levels etc get mixed down also so again mix to taste before joining
Done!

Noises&skipping during music playback on itunes from ext drive audio files.

hello,
Since my itunes library it is getting too big (about 14000 songs & wave files) I'm using a maxtor one touch II 300gb ext hard drive & another ext 200gb where I moved only the actual audio files.
So I get weird noises, like electric noise or static, during playback & very often some songs just skip after a few seconds to the next song.
I tried everything: on the ipod these files are still bad, on cd as well & on pro tools the same...I can't get rid of these noises & skipping.
So I have the feeling that I'm doing something wrong setting up itunes with an ext drive.
Do I have to put on the ext drive the actual itunes music library.xml & itunes library icon from the int drive?
Or just the actual music & keep the original itunes folder untouched?
Which one should I choose as the main music folder location, int or ext?
Please help I'm lost & i'm losing so many songs during these days...
Thanks,
Exi
power pc g4 Mac OS X (10.4.4) 2gb sdram

Hello,
thanks so much for your support:
I actually did everything but at this point I get lost...
# After the folder has been copied, locate your original iTunes Music folder, and drag it to the Trash or Recycle Bin. Note: Don't remove the iTunes 4 Music Library files that may be in the same location as the iTunes Music folder.
# Empty the Trash or Recycle Bin.
I don't understand if they talk about the iTunes music folder located in the internal hd or the one in the external one that now is the main folder for itunes.
Do I have to put the .xml & the music library icon on the ext as well?
thanks again,
Paolo

No audio on playback of any file types. Driver issue? Realtek High Definition

I don't recall when this started happening, since I haven't used the program in a very long time. But, no sound is heard from any type of clips I drop into the program. Nothing from the source monitor and nothing from the main window.
Volume bars show up on the main window but no audio is heard. Audio Hardware preferences have the default device set to premiere pro wdm sound (i suspect this is the issue). I updated my Realtek HD driver last night to version R2.75 (6.0.1.7246 in windows properties). Premiere Pro CS5.5
Also, maybe not related, I can't drop audio files where I want. It's as if the audio tracks are locked. It only allows me to drop in added tracks, not audio 1 or 2. Even though I have audio in tracks 1 and 2, I can't move new files to these tracks. Even if I unlink the a/v, the audio still will not budge.
Hopefully these screenshots help.

I don't follow "Note the Icons in the Audio Track Headers that show this"
In the Audio Track Headers are "speaker" icons.
A single speaker is Mono
A double is stereo
5.1 says 5.1 (IIRC)
Mono only goes in a mono track - single speaker.
Stereo only goes in a stereo track - 2 speakers
etc....
Show Audio Hardware scren grab please.

Aperture Audio File Playback

Similar Messages

Maybe you are looking for