Aperture book order does not go through

Hi, when I press "Buy Book" and make an order, I get a page that says "Your Order is Being Sent", but it just stops there.
I've tried on 3 different occasions but I never can make the order go through.
Can anyone please help?
Thank you!

After multiple tries, it went through.

Similar Messages

My book order does not complete

When I purchase my book and the order is in the "assembly" and "upload" process, it does not go through !
this is how it stays for the whole night until a window appears that the order was canceled ! this has happened
several times !! what should I do or what is the problem ?

This is the iPhoto for iOS forum, and I don't think you can order books from it. Suggest you post your question in the regular iPhoto forum.

When I rearrange the order of my photos in an album, the order does not stick for exporting for a book.

I manally rearrange my photos in an album, the order does not stick when I export to a folder in order to make a book. Also, if I have given a title to a photo, it does not seem to export with the other pictures in an album.

It's a little vague on what you're workflow is. So I'll make a guess about the book: if you're dragging those photos into an iPhoto book they will be sorted by date. So you would have to use the Photos ➙ Batch Change ➙ Date (with 1 minute between photos) menu option on those photos in the album before dragging them onto the book icon.
Photos exported to a folder on the hard drive will be sorted by the Finder either alphanumerically or chronologically. To get them in the manual order that's in the album you'll need to rename them via the Photos ➙ Batch Change ➙ Title to Text with a sequential number added to each photo. Then export to the Desktop with the option to use the Title as the new File name.
OT

MIGO error 'Purchase Order does not contain a confirmation control key'

Hi,
while posting GR to a PO i am getting an error ' Purchase order XXXXXXXXX does not contain a confirmation control key'
it is true that i have not defined any confirmation control key in PO, Aknowled rerd checkbox is also not ticked
Still why this message coming, what setting would be bringing this message
Please clarity

Hi,
Until the installation of Note 589422 (with SP SAPKH46C43) you could due to a program error - create a delivery even though the purchase order did not contain any confirmation control key.
This is now prevented through error message M7394. The transfer of this check (Confirmation control key existing in the purchase order, see Note 589422) was necessary as otherwise you could post a purchase order as desired. (Refer to also Note 616944 -> SAPKH46C44)
589422 Several inbound deliveries can be created with MIGO :
"Implement the program correction.
With Transaction SE91 create message M7394 with the message text:
Purchase order & & does not contain a confirmation control key".
After you implemented this correction, when you want to create an
inbound delivery with Transaction MB01 or MIGO or with
BAPI_GOODSMVT_CREATE and if the purchase order does not contain a
confirmation control key the system displays error message M7394
"Purchase order & & does not contain a confirmation control key".
Hope this can explain the error you met.
Regards,
Mauro

Purchase Order price not pulled through from Purchase Requisition.

Hi:
The Valuation Price on my Purchase Requisition does not pull through to the Purchase Order.
All the settings on "OMET" and my user profile seems to be set but still I get an error - No conditions determined (no authorization for input)
when I enter a tax code on the PO.
All my other authorizations are also okay.
What can the problem be.
Thanks.
W.

Maybe you should explain all steps YOU have done, instead of saying "yes I have done that", As this function works for many many companies without any problem, it is either an issue with your enties, or it is a bug in the programs.
For a bug, you should search OSS notes and open a message to SAP if you cant find one that solves your issue.
the authorization part of this message relates to the functional authorization, and cannot be seen in SU53.
The error is issued in these 4 cases:
   IF t160d-erfin EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF t160d-eprsz EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-erfin EQ space.
      MESSAGE e235.
   IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-eprsz EQ space.
      MESSAGE e235.
so you only need to provide the values of following fields:
T160d-ERFIN
T160D-EPRSZ
EKPO-REPOS
EKPO-NETPR
Edited by: Jürgen L. on Jan 24, 2012 1:11 PM

Aperture serial number does not work

I just got a Mac Book Air, my Aperture Serial number does not work. it tells me it is not correct. How can I use my software now?

First how did you purchase Aperture and how did you install it on the Air? As the Air does not have a DVD drive it would help to know how you got the app onto it.
Start with Troubleshooting Professional Application Serial Numbers and see if that helps.
There is also Pro Application Replacement Serial Numbers if you're not able to get your serial number working.

My mac book pro does not start but has error message with a question mark on screen. took it in and was told probably the hard drive as could not reconize it so bought new one but still not connecting.what do i do

My mac book pro does not connect but shows an error message with a question mark on the screen.I took it to a retailer that said it was not reconizing the hard drive.He said i needed a new hard drive but it may be something else as well but he was sure a new hard drive would fix it.So putting faith in someone who deals with them i purchased a new hard drive to find it was still not working although he said the computer did know reconize the hard drive and i may have to send it away to get it checked .After already paying 120 pounds for a new hard drive and they wanting another 80.00 pounds to diagnose it i am a little sceptical.
That's why i am interested on anyone's help.

Welcome to the Apple Support Communities
I think that your Mac detects your hard disk, but the problem is that your new hard disk doesn't contain any operating system, so your Mac doesn't find any bootable partition and you see a question mark.
If your Mac came with DVDs, insert the Mac OS X Install DVD and hold the C key while your Mac is starting. Then, just install Mac OS X. If the hard disk isn't prepared to install Mac OS X, you will have to erase it using "Mac OS Extended (Journaled)". See > http://pondini.org/OSX/DU1.html

Sales order does not allow make-to-order production

Dear Friends,
I am trying to do do planned order for sales order in MD50 it was showing the error message as
"Sales order does not allow make-to-order production"
Can any one solve this
Shakthi

Hi Shakthi,
It is also possible to set the priority for Requirement Type determination like
0 Material master strategy, then item category and MRP type
1 Item Category and MRP Type
2 as 1, with check for allowed requirement type.
The transaction for this is same as "Requirement Type Determination :
Sales and Distribution --> Basic Functions --> Availability Check and Transfer of Requirements --> Transfer of Requirements --> Determination Of Requirement Types Using Transaction
Look for "Source".
In this transaction, Please, check "Requirements".
Please, make sure of the following 2 things :
1. If you do not set an indicator for maintaining the requirements class: Transfer of requirements is not carried out, irrespective of the specification you make at schedule line level for the transaction.
So it is necessary to mantain the setting first at the Requirements Class. As mentioned in my earlier posts, the requirement class for the material can be found out from Planning Strategy / MRP3 view --> Main strategy (defined in the strategy group) --> Requirement Class for Customer Requirements.
The IMG path for "Define Strategy" is Production --> Production Planning --> Demand Management --> Planned Independent Requirements --> Planning Strategy --> Define Strategy.
2. Once the "Requirements" indicator is set in Requirement Class, the requirements indicator at the Schedule Line decides whether or not you require transfer of requirments for the relevant transaction.
I hope this should solve your problem.
Regards,
Sandeep

Error of PO - "Purchase Order Does not exists"

Dear Experts,
Here i am facing one error of Purchase Order Creation and its further processing.
I have created purchase order and saved it, system issued message that, Purchase Order XYZ is created. (I have taken trial for 2-3 Purchase orders).
When, i am posting Goods Receipt for the PO, system is issuing the error message, Purchase Order does not exists.
Also in ME2M (PO list display) and Me23N (Display PO),
system is issuing the same message - Purchase Order Does not exists, but in PO Creation it is generating Purchase order normally.
Here is no matter of release strategy, because, PO release is not configured.
Dear Experts, Please guide me on the issue !
Thanks in advance !!!!

there can be hundred of different reason for a failure. Most common reason is a problem with the number ranges, e.g. system tries to create a record with a number that is already there.
This can happen if the number range was reset (or transported from a developement system).
But transaction SM13 gives you all the details.
There you see a line for each posting failure. Double click this line again to get more details.
There you will certainly find a line in red that indicates in which function the failure ocured.
Double click this red line to get more info. Use the buttons above to see the content of the posting. For some failures you can create a dump that gives you much more details.
Best you sit together with an ABAPer who can certainly tell you more how to read a dump and how to find the reason.

My Mac Book pro does not recognise the wi-fi net. How to fix it?

My Mac Book Pro does not recognise properly the Wi-Fi net at home. I've tried many ways in "preferences", but it realy does not work. When connected in the Ethernet port, it works perfectly.
Don't have any problems with other computers at home.

I don't know what you mean by "doing new concessions on DHCP"!!??? Have you tried using a static IP address to see if it works that way? Have you restricted the range of DHCP addresses available at your router? If you have maybe the other computers have used up the available range. Suggest you try a static IP address first, then we'll take it from there.

Image Processor does not start through Bridge CS5

Image Processor does not start through Bridge CS5, it starts only PS and nothing happen. I do not know, how to repair it.

Most likely you do not have the startup files checked.
In Bridge go to edit/preferences/startup scripts. Make sure you have a check mark for Bridge and Photoshop. Without that they can't talk to each other.

What to do? When on a site with a PDF download I wish to open, the site commences to open in a new Tab but the information does not come through? This happens on all sites. The advanced Java Script is disabled.

When on a site with a PDF download I wish to open, when I click on download the site commences to open in a new Tab but the information does not come through? This happens on all sites. The advanced Java Script is disabled. The new tab will sometimes flash black then go white with nothing else happening or just go white & nothing else?

I had the same problem and also had PDF Download 3.0.02 installed. By removing this addon I can now select a PDF document which then opens up a normal Open With/Save dialogue allowing me to open the file or save it. Hope this helps.

CRM service order does not create purchase requisition

Dear experts,
CRM 5.0
We have a scenario where saving a released service order should create a purchase requisition in ECC and update the document flow. I have performed the following steps and still the PR isn't getting created.
1. Configuration in CRM and ECC for integration of service processes with logistics and maintaining the purchasing document types.
2. Maintaining standard pruchase groups in ECC table V_TMW01
3. Assigning standard purchase org to the plant
4. Making sure correct RFC destination is assigned to the logical system.
Am I by any chance missing some middleware steps as saving the service order does not even trigger anything in the system?
Thanks
Ritwik

Hi Ritwik,
Just check the following activities are maintained or not
1) You have created the subscription in SMOEAC with Site , Replication object and Service Order
     Process type in the criteria value.
2) You have maintained the customizing entry in CRM in spro for the following combination in logiistics
    Integration for Trans.Type Item Cat. Service Organization Org Unit (Service) Log. Scen.
Regards
Pavan.A

Phases/operation in process order does not exist

phases/operation in process order does not exist this error coming when cor6n is using.why?

HI
After creating Master recipe in C201, under the operations tab you need to define the operations involved in recipe . along with the operation column there is phase indicator column is there which is to be selected whether this operation is phase or not...
Check and revert
Regards
Anupam Sharma

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

Aperture book order does not go through

Similar Messages

Maybe you are looking for