Aperture cannot open iphoto library

on trying to open my iphoto libraries on my external hard disc, aperture says the system is not supported. both are up to date and i can open them in iphoto. what could be the problem?
i use a mac air and a lacie hard disc.

hi terence, thanks for reacting. it's about the file system on the hard disk and i don't know about the format of the disk itself. will have to ask my better half tomorrow when he's awake as it belongs to him. all i can tell you is that we are dedicated mac users.

Similar Messages

  • Cannot open iPhoto Library (9.6) in Aperture (3.6)

    Hi,
    I've done some searching around and can't find a solution to this problem:
    When trying to open my iPhoto Library in Aperture, I continually get the message
    "To open this iPhoto library in Aperture, it first needs to be upgraded.  Verify that you have iPhoto 9.4 or later. Then open the library in iPhoto to upgrade it."
    I am running
    iMac Late 2013
    Yosemite 10.10
    iPhoto 9.6
    Aperture 3.6
    All updates run on the system
    I have another iPhoto Library that opens fine in Aperture.
    I have tried opening the library using a separate user account with no luck
    Any help greatly appreciated!

    Does the iPhoto Library open in iPhoto 9.6?
    If yes, then open it in iPhoto and use the menu entry "File > Open Library in Aperture".
    If that does not work, repair your iPhoto Library in iPhoto to fix any wrong database entry:
    Try to repair the iPhoto library with the First Aid tools:
    Try to launch into the First Aid Tools  by holding down the key combination option-command ⌥⌘ and clicking the iPhoto icon to launch iPhoto.
    Keep the two buttons firmly held down, until you are seeing the First Aid panel.
    Then select "Repair database".
    If that does not fix it, backup your iPhoto Library and try the other First Aid options as well.
    Where is this iPhoto Library stored? Is it in the default location, the Pictures folder or on an external drive?

  • I cannot open iPhoto library without upgrading

    I think I know the reason: There was recently an upgrade of Aperture, which I have purchased, which asked my to upgrade the iPhoto library. Anyway, iPhoto now says I need to upgrade iPhoto to open my library. And the only upgrade I see has to be paid for.
    Can anyone confirm this?
    Isn't it strange to force such an upgrade on customers?
    Is there a work-around to this problem?

    If Aperture is using your iPhoto library, you probably have got iPhoto '11, so you can upgrade iPhoto for free. Anyway, it's better to check this.
    Open a Finder window, choose Applications in the sidebar and you should see iPhoto. Right-click iPhoto and choose Get Info, so you should see the iPhoto version. If it's 9.x.x, you can upgrade iPhoto free of charge.
    Open the Mac App Store, go to Updates and install iPhoto 9.5 for free. If you don't see the update, try switching the OS X language to English in System Preferences > Language & Region, and restarting

  • Cannot open iphoto library in Photoshop

    I have updated to ilife11 and now when i open Photoshop and try to import a picture from iphoto i can see the iphoto library in Pictures but it is not highlighted and i cannot open it. Can anyone help.

    edit: if you were using Bridge as a photo navigation tool, please disregard my previous comments that I have now removed as they are no longer relevant.
    Message was edited by: roam

  • Cannot open iphoto library 5 with iphoto 8

    My old mac (ibook G4) still has iphoto 5 and this new one has iphoto 8. I cannot open my old library with this new version, and I have most of my photos in the old library!
    How do I open my copy of iphoto 5 with iphoto 8?

    Welcome to the Apple Discussions.
    Remember, once you open the Library with iPhoto 08 you will no longer be able to open it with the earlier version.
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library' and point it at the v5 library. If iPhoto sees a valid library there it will open it.
    Regards
    TD

  • CANNOT OPEN iPHOTO LIBRARY AFTER UPGRADE

    I had a routine upgrade message last night so hit Install.  My iPhoto logo changed from the yellow with palm tree to a new one with a blue background and a flower.  There was an error message during the update of my library (24000 images) and now says my library is corrupt and should be opened from back up.  I plugged in my EHD with the back up, previously there had been the iPhoto Icon with the palm tree.  That had gone and was a blank page logo.  I hit open and was told it needed to upgrade my library to work with the new iPhoto.  This is what had happened on the MacBook Pro (Mar 2011) and failed during upgrade.
    I have a time machine from 10 days ago and I can afford to go back to then as I can still back up any work not in my iPhotos library.  Photos saved in folders outside the library work fine.  I use Adobe CS5 Photoshop for my main images but all my shoots automatically store in IPhoto library.  Could I be storing them better?
    Thanks
    Jules

    Back up corrupted to, thank God I got apple care, they talked me through!  I opened iPhoto icon from the dock while holding CMD and ALT, I got four options, I tried all of them and after three had failed I did the rebuild option that said only to use after the other had failed.  Worked a treat.

  • Aperture cannot import iPhoto library

    I am unable to import iPhoto library into Aperture.  It complains that the iPhoto version is older than 7.1.5 and thus not supported.  However, I'm working with iPhoto version 9.4.3.
    Any clues how to address this - rather odd...  Just bought the software and have some urgent work to perform with it - so any quick helping advice would be great.
    J

    Jens,
    which version of "Aperture Install Notes" are you referring to? Is your Aperture version the most recent donwload Aperture 3.4.5 from the AppStore? You need at least Aperture 3.3. to be able to share the libraries between iPhoto and Aperture and to use the iPhoto Library as your Aperture library.
    Now, should I re-install Aperture and wipe the "imported library" to make sure I have a clean sharing between iPhoto and Aperture or does it not matter?  I do not want to have double the copies
    It is not necessary to reinstall Aperture, if you want to start over with a new Aperture library. The Aperture Application and the Aperture libraries are completely independent. You can simply trash the current Aperture library (by default it is in your "Pictures" folder and called Aperture Library.aplibrary). Only make sure, that your original iPhoto Library still contains all your photos. When you imported to an earlier version of Aperture, you may have moved your originals from iPhoto to Aperture. That is why I am concerned about your Aperture version.
    Regards
    Léonie

  • Cannot open iPhoto library

    I am on OS 10.6.8 and iPhoto 11.
    I had to do a re-install of the OS (and the apple store) due to a failed software update and presumed my timemachine backup would retore everything else thereafter.
    To cut a long story short, I was left with having to drag my files onto the new Mac and did so with the iTunes stuff ok. However, on iPhoto when I click on the library it gives me the following message which may be misleading
    "You can't open your current photo library using this version of iPhoto"
    It gives me the option to quite although the subtext states:
    "you have made changes to your photo library using a newer version of iPhoto. Do you want to quit and use the latest version of iPhoto or do you want to create a new photo library"
    However, there is ONLY a quit option which leads me to believe that the issue here could be a later (newer) version of iPhoto is required?
    Furthermore, when I go into "explore package" I can see all the files arranged by year in the "Masters" folder. However, an import into a new library does work but leaves the files in disarray - i lose all events and any organisation I had previously.
    I have looked at https://discussions.apple.com/thread/3858125?start=0&tstart=0 which is where I got the idea of exploring the packaging and trying an import. But I would really like to ensure that I can keep the events or get the original db to work.
    Any help would be appreciated.
    Mikhail

    Restore as shown in this screenshot:
    OT

  • Upgrade iPhoto to open iPhoto library after installing iLife 6

    I am a real computer novice and just installed iLife6, which I should not have done because now I have no access to my iPhoto library. It tells me I need to upgrade iPhoto to open the library so I selected "upgrade." Then it tells me there is a problem with some of the files and I need to go to Finder, click Get Info and be sure ownership & permissions are Read & Write in the iPhoto Library. I have tried that repeatedly but it tells me I don't have privileges for all I am trying to access. But I am an administrator on the computer, and every possible file I have opened is now Read & Write. But I continue to be stalled out and still cannot open iPhoto Library. I tried copying the iPhoto library to another computer with iLife 6 already installed, and it tells me some of the files in iPhoto can't be imported because they are in iPhoto Library. I am so confused, and now would like to just remove iLife6 from this computer to get back to my original iPhoto so I can access these Photos but I don't know how to do that either. Does anyone have any ideas at all that can help me please?

    svbp:
    Welcome to the Apple Discussions. Give this a try:download and run BatChmod on the iPhoto Library folder with the settings shown here, putting your administrator login name, long or short, in the owner and group sections. You can either type in the path to the folder or just drag the folder into that field. Launch iPhoto and try to update the library again.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • The hard drive on my MacBookPro crashed.  The Apple store replaced it.  Since then I can't open iphoto.  It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture!

    The hard drive on my MacBookPro recently crashed.  The Apple store replaced it.  Since then I can't open iphoto.  It asks to rebuild library; when I click yes, I get: "Aperture cannot access this library; reset permissions." I don't own Aperture!  Any thoughts on how I can rebuild the iphoto library?  Currently I can't even get into it.

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

    i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
    I tries and it doesnt work!!

    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

  • I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    I just downloaded Ilife 9 and now my Iphoto doesn't open. The error message says: You cannot open your library using this version. Quit and use the older version. What can I do?

    iLife '09 is not available as a download - it is only available as a purchase
    iLife '11 is available as a DVD purchase and the compoments of it are available from the App Store (iPhoto '11 (version 9.1.5), etc)
    Exactly what did you do? And exactly what does the error message say?
    On the surface it appears that you are attemptying to open a new library with an older version (iPhoto '09 can not open an iPhoto '11 library for example)
    LN

  • Cannot open iphoto, The library is not compatible with iPhoto., cannot open iphoto, The library is not compatible with iPhoto.

    After automatic update, cannot open iphoto. Error reads, The library is not compatible with iPhoto. Please help, I need to recover client photos ASAP.

    Try the iPhoto forum:
    https://discussions.apple.com/community/ilife/iphoto

  • Cannot open iPhoto or access library due to failed update

    I have tried several times to update my 10.7 MacBook Pro but the combined update always hangs and gets stuck on "moving items into place". I ignored it for a while and realized without this update I cannot open iphoto or even access my photo library. Every time I click the dock icon I get an error that states I need the most recent version. So I guess my two questions would be what can I do to update this software successfully? And how can I access the iPhoto library without updating (in case I can't update)? Any help would be appreciated! Thanks!

    I have tried several times to update my 10.7 MacBook Pro but the combined update always hangs and gets stuck on "moving items into place". I ignored it for a while and realized without this update I cannot open iphoto or even access my photo library. Every time I click the dock icon I get an error that states I need the most recent version. So I guess my two questions would be what can I do to update this software successfully? And how can I access the iPhoto library without updating (in case I can't update)? Any help would be appreciated! Thanks!

  • Cannot open my library. iPhoto says I opened it before with a newer version which is not true.

    Cannot open my library. iPhoto says I opened it before with a newer version which is not true. I am using Snow Leopard and iPhoto 7.1.5 which seems to be the latest update. How can I reach my photos? I don't particually care for iPhoto anymore since I am using Lightroom now, but I would very much like to reach my picture files, HELP

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 08* library:
    Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. 

Maybe you are looking for

  • SAP NW Sneak Preview (tuning)

    Hi, I've installed SAP NW sneak preview (Java Full edition) on my notebook (Intel Celeron M 1.6GHz, 1.5DDR2 GB). I want to setup it for less memory consumption cause it will be system only for my development (portal + KM). I just wanna to have system

  • How can I define the intermittency factor of a signal?

    Hi everyone, I want to ask how can I determine the intermittency factor of any signal. The intermittency factor is a ratio of the time of high frequency distortion in the signal to the total time of the signal. So, Intermittency=time_turbulent / time

  • Ichat AV 2.1 "broken pipe exit "error

    Seem to have isolated the problem with ichat to "broken pipe".Ichat opens off and on but mostly not. Sometimes the welcome to ichat screen opens sometimes the buddy list. If I close it ichat wont open a second time. I have done all the suggested thin

  • Basic 3d not smooth

    does any1 has the same experience as mine when you using the basic 3d filter to rotate on the Y axis, it doesn't move smooth. I have only 2 keyframes on the Y spinning & it's not smooth. I've also notice that any animating motion keyframe would not b

  • Received an email from iCloud telling me my storage is full ,when i go to storage

    Received an email from icloud telling me that my storage is full, when i go to storage on my iphone it tells me i have 4.4 GB available, what next???