Aperture + Canon Wireless File Transmitter WFT-E4 A?

Hi guys,
I was wondering if you could help me out with something?
I have a Canon EOS 5D mkll and am looking at purchasing the Canon Wireless File Transmitter WFT-E4 A, my question is, am i able to wirelessly tether RAW images using this transmitter directly to Aperture or do i have to go through Canon's proprietary software?
Thanks in advance.
Alan

My guess is that you will see a wireless network in range using your Airport menu. The Airport menu looks like
. If it is all gray and nothing is inside of it, then the network was not properly setup. I do not have one, but if you tried to setup the network, and you can't see the device, then you might need Canon's support.

Similar Messages

Wireless File Transmitter WFT-E4 II A and Barcode Scanning

I bought Canon 5D Mark II and now I am thinking to buy a wifi kit, is there anybody has knowledge about that, in Wireless Transmitter WFT-E5A (for 7D) with a customized firmware barcode readers can be supported, can I do same thing with Wireless File Transmitter WFT-E4 II (for 5D Mark II)
Could you please share your ideas,
Thanks.

Hi falee642!
We can certainly understand your concern, and we apologize for the confusion. While we don’t have the Wireless File Transmitter WFT-E4 II A in stock currently, it has not been discontinued. HERE is a link to our Where to Buy page, so you can find nearby or online Authorized Canon Dealers. We’re confident someone will have the Wireless File Transmitter WFT-E4 II A for you to purchase! We hope this helps point you in the right direction!

How to get macbook pro to work with a canon wft-e6 wireless file transmitter

I recently purchased a Canon WFT-E6 wireless file transmitter for my 1DX Canon Camera. I can't find a way to set up my Notebook Pro to work with this device. Has anyone run into the same issue? and if so do you have a solution?

My guess is that you will see a wireless network in range using your Airport menu. The Airport menu looks like
. If it is all gray and nothing is inside of it, then the network was not properly setup. I do not have one, but if you tried to setup the network, and you can't see the device, then you might need Canon's support.

Canon wireless transmitter to Ipad 3 experience?

I use the Canon 1DX and am wondering how well the
Canon WFT-E6A Wireless Transmitter
would work to see my imaging on an Ipad 3. I've read
poor results from some people, so can anyone help me on this?
Thanks......

Hi JohnWayne!
Thank you for posting!
The WFT-E6A should work great with your iPad. The setup also does not take long. We have an article on the Canon Digital Learning Center about the WFT-E6A that you may want to look at. It describes in more detail the capabilities you gain when using the WFT-E6A. I have included the link below:
Wireless File Transmitter WFT-E6A
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Aperture 3.1 can't find/see my Canon RAW files when importing

Aperture 3.1 cannot see my CANON RAW files when doing import!!!
Do I really have to re-reference each image in the library if I have moved the library to a different volume? Images are not moved to the library, only referenced.

You don't want to re-import files if you move the library. You just need to reconnect the masters.
If you moved the whole thing over at once it should be easy; if you monkeyed with the folder names you could have a lot of work on your hands.

Lightroom 4.3 teathering with Canon Wireless WFT-E7A

Does the Canon 5D mark 2 WFT-E7A wireless unit work with lightroom 4.3 to shoot teathered?

It is probably not related to your tethering session in Lightroom. It is also unlikely to be related to the order you unplugged things. (Unless you yanked the cable and damaged some electronics).
Have you tried pulling both batteries for 30 minutes (The regular battery and the quarter-sized watch battery)? Pull those and the memory card. Unplug all cables and let it sit for a while and then replace the batteries.

Display a Canon raw file as shot in Aperture?

I believe a number of settings are saved along with the image in a Canon raw file, such as. White Balance, colour space, Saturation, Contrast, sharpness and picture style as well as a few more things. Is it possible for Apreture to display the image with these "as shot" settings? A previous piece of software I used to use on a PC called Breezebrowser displayed the image prior to import (conversion) with these as shot settings but allowed you to alter these if required. If this could be done then I would find it a good starting point before post production adjustments are made. Hope this makes sense.

The short answer is no you cannot - yet. The best way to accomplish this is to create a series of preset templates that you can lift from prototype images and stamp to your imported images as a set of baseline adjustments. If you like the way that the in-camera settings are rendered just shoot RAW+JPG for each of the settings and then match the RAW to the JPG for each different setting for your starting points.
I am not real familiar with Canon stuff but if the WB is rendered a little differently that is the biggest pain in Aperture because it is one of the only adjustments that are not relative, it's absolute - so unlike brightness, contrast etc. you can't bump it up a little or down a little with a preset you can only assign an absolute value.
Hope this was at all helpful.
RB

Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible? Please help!

Is there a Canon Eos (T4i, T5i) camera digital file transmitter avaialible? These models tlisted for Canon all cost $600 + and up all say they are only compatible with with the pro models. Is there a another brand or model that works with the lower end DSLR Eos rebel models that doesn't cost an arm and a leg? Please help.

I've heard the Wifi SD card may resolve your problem and they're much cheaper.
http://www.eyefi.com/products/prox2
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Using Canon Wireless *** - E3A with Aperture?

Anyone gotten these canon wireless contraptions to work with Aperture in a tethering mode so you see the pic within a few seconds of it being shot?

http://tinyurl.com/5wrrkw

DNG Converter no longer converts focusing points from Canon CR2 files

Hi all,
Up until some time between July 2010 and September 2010, the focusing points embedded in the original Canon CR2 files were also converted and containded in the DNG-file. Hence up until this point in time the focusing points were shown in Apple's Aperture. Since September 2010 this is no longer the case.
I had hoped for the DNG Converter 6.7 Beta to have corrected this truncation of the files.
I am using af Canon EOS 1D Mark III. I am running OS X Lion 10.7.3
1. Has anybody else experienced the same change in behavor of the DNG Converter?
2. Can anybody still see the focus points in Aperture or equal Imaging program?
3. Does anybody have an idea, how to contact Adobe for such a feature request?
Thank you in advance for your help.
Kind regards,
Allan

Hi MadManChan2000,
Thank you for your answer. So what you are saying is that for some reason Apple's Aperture is no longer reading these MarkerNote metadata correctly?
Kind regards,
Allan

Slow with Canon 5D files

Okay, I am one of those who thought they could speed it up.
Photoshop straightens in real time for a proxy image - why doesn't Aperture produce a proxy image until you have gotten the darn thing where you want it? It is almost unworkable, even on a MacBook Pro with the Canon 5D files.
Portfolio (along with most other catalogue programs like Bridge) generate thumbnails and show instantaneously after they are generated - why not Aperture? At least in one size. Can it be that hard to make a parallel database for thumbnails?
And where are the vignetting and distortion corrections? Someone should tell Apple people are using zoom lenses nowadays that need corrections in all but perhaps portrait photos.
Don't get me wrong - I love the program and want to see them make lots of money - hence my comments.

(marked as question by accident)

When exporting files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might do 524 images but not the full 600. I've tried resetting Aperture, it's the latest version etc etc. Help please!

If anyone can help me with this I would be seriously grateful.
When exporting mutliple files to web pages Aperture keeping losing files, so for instance, if I choose to export 600 images to a new web page, it might make 524 pages but not the full 600. I've tried resetting Aperture and its persmission and am using the latest version of 3.
I have 3600 images which I need to upload as sublfolders, each with their own URL and at the moment Aperture is dropping of anything from 1 to 90 images.
This is critical as people need to see each and every on of these images online. So if a file has 600 photos in it, Aperture should make a URL with 600 full image pages. And this is what it's not doing. On small files, say 30 or so it seems to work well, it's when it gets to more than that the problem starts.
I've used Aperture in the past under previous versions and not had this problem.
Any help would be great.
Thanks.
Bob.

Hi Jack,
Thanks for responding (as it seems as though no one else has been able to provide any insight as of yet)! Not sure if you saw my recent post, but the version of Aperture on the 2008 MacBook has been upgraded to 3.1.2 (not sure how; I bought it in 2009, but only have OS X 10.5.8... which apparently can't house 3.1.2 of Aperture, but hey, like many other anomalies i'm encountering, I'm no longer surprised!). I am unable to upgrade it any further, as it warns me that my OS X does not fit the requirements. I exported the projects as libraries; however, like I posted before, apparently these are from too old of a version for the new Aperture (3.3.1) to handle and import.
It's getting to the point where I'd almost pay to upgrade the OS X on my previous MacBook (10.5.8) to something newer in order to THEN update Aperture to a newer version; however, my previous MacBook simply cannot handle this (the specs are awful -- hence my decision to save up and upgrade to the newest MBP with Retina).
I've spent hours upon hours transferring files, libraries as projects, previews, versions, even masters (though, apparently some of them aren't accessible?) with no luck. I've rebuilt the library and reprocessed everything. And this is all after having to return one MBP already since Aperture 3.3.1 is glitch-y as it is, and froze everything for having a "managed library". So, now that I know that I have to deal with a referenced library in Aperture... I just need to actually transfer my previous library to my new one (hopefully WITH adjustments since these are years worth of photos and work).
Again, any help is appreciated. I've lost enough sleep, time, and vision health over this at this point.
Also, I know Migration Assistant is an option, I was told that it wouldn't work properly anyway because of the different operating systems, and the potential for problems.

Previews missing from Canon Raw Files

On the last few imports from both Nikon D800 .nef files and Canon .cr2 files the previews are missing. The machine is a
Mac Pro Tower
2.66Ghz with 8gig Ram Plenty of HD space Running 10.6.8   Adobe Photoshop CS6 All updates for both adobe products and Mac OS have been installed.   Camera Raw is upto date.
So when using the camera downloader in bridge the files down load fine. Then when you navigate to the folder to look at the files all you have is the white icon of the file type not the Jpeg preview.   I   have reset Bridge, emptyed it folder as well as main cach and this still happens.    So my question is how do I fix this?
Thanks

On the last few imports from both Nikon D800 .nef files and Canon .cr2 files the previews are missing. The machine is a
Mac Pro Tower
2.66Ghz with 8gig Ram Plenty of HD space Running 10.6.8   Adobe Photoshop CS6 All updates for both adobe products and Mac OS have been installed.   Camera Raw is upto date.
So when using the camera downloader in bridge the files down load fine. Then when you navigate to the folder to look at the files all you have is the white icon of the file type not the Jpeg preview.   I   have reset Bridge, emptyed it folder as well as main cach and this still happens.    So my question is how do I fix this?
Thanks

Can't open Canon RAW files in LR1.3, Photoshop, Bridge

Hi.
I'm having a problem with some Canon RAW image files a second photographer sent me. He sent about 800 files and I'm only able to import into LR (1.3) about 15% of the files. The remainder will not import. Upon import, LR says something to this effect: "files appear to be unsupported or damaged." I tried them on both of my macs (my G5 and laptop) and had the same thing happened. Photoshop says: "Could not complete your request because Photoshop does not recognize this type of file."
They show with this icon: file:///Users/marthafitzsimon/Desktop/Picture%203.png
When I do the "get info" on these files, under "General:" it says, e.g., that a file is a 10.8MB file. Under the "More info:" box, it says the dimensions are 0x0 (that's weird because when I look at this for other good files there are numbers for the dimensions).
This is a picture of the "get info" window:
file:///Users/marthafitzsimon/Desktop/Picture%201.png
I have tried to open these files in LR, Photoshop, Bridge and Preview and nothing will open these.
The files are locked so I unlocked one, but that made no difference whatsoever.
I noticed one thing about the naming convention on the files,but I don't think this matters. My own Canon RAW files always have the .CR2 extension. All of his files have the .cr2 extension. Mine are all uppercase and his are lowercase. However, I don't think this could matter because the files I was able to download of his all had the .cr2 extension, just like the ones I couldn't download.
(PS: Just in case you saw my earlier posting, this problem has nothing to do with that. This is another second photographer's files that I'm having problems with. Jonathon LeFaive solved that other problem for me.)
Thank you for any help you can provide! Martha
Message was edited by: marthafitzsimon

LR 3 is a complete new build so it will not overwrite the earlier version of LR 1.3 or its catalog or other settings.
The install procedure will recognize your LR 1.3 catalog and ask if you wish to create/ convert to a LR 3 catalog. This procedure will not overwrite your 1.3 catalog but will create a LR 3 compatable copy.
Download the trial which is good for 30 days before you will need to pay the upgrade price of $99 if you decide to keep. The trial is the full package and you will not be restricted in any way.
The new features are a substantial upgrade with significant improvement in the conversion output of your raw files.
Full details are provided in the "read me file" included with the download which should be read carefully before you install. The decision should be a no brainer.

Just upgraded to 10.8.4 and now can't open canon raw files in photoshop cs5 with camera raw plug in 6.7

i've just upgraded to os 10.8.4 and now i can't open canon raw files in photoshop cs5 with camera raw plug in 6.7 which worked perfectly prior to the upgrade....anyone else encountered this issue?

Adobe's software is a mess in terms of the fact that it's sprayed all over the place and may not survive an OS upgrade. Try reinstalling Photoshop CS5.

Aperture + Canon Wireless File Transmitter WFT-E4 A?

Similar Messages

Maybe you are looking for