Aperture compatibility with Fuji S9600

Hi all, I have a FujiFilm S9600. Try as I might I cannot get Aperture to recognise RAW photos I have taken with the camera. The S9600 is the replacement for the S9100, and to be honest I thought the RAW format would be the same as the S3 Pro camera which is supported by Aperture. At the moment I am using the bundled software, making some alterations and then saving the photo as a TIFF and importing it into Aperture. As you can imagine this is rather more longwinded than I had hoped for.
Can anyone help me with this? I would be very grateful.

{quote:title=Dreagor wrote: to be honest I thought the RAW format would be the same as the S3 Pro camera
}{quote}
Hey Dreagor welcome to the forum
all Raw formats are different
they may have the same file name from the same manufacture (Canon= CR2 Nikon= NEF stuff like that) but between cameras they will be different information
DAVE

Similar Messages

  • Aperture Compatibility with G4 MDD

    For information, Apple has posted an "Aperture Compatibility Checker" application download on the Aperture web pages (under Tech Specs then bottom left corner). It takes a few tries to get this to download. I ran the application and it came back and said my dual 1 ghz MDD upgraded with an ATI 9800 graphics board was NOT compatible. Minimum capability was 1.25 G4. This is a disappointment of course, but saved me $500. I do have a 1.25 G4 Powerbook, though I don't want to use up all my hard drive space with RAW image files.

    I posted a question elsewhere about this topic as well. I just upgraded my graphics card to an ATI 9800 Pro precisely so I could run Aperture. Since the system requirement indicate you can run Aperture on a G4 Powerbook with a 1.25 gig processor I figured I'd be fine with a dual 1.25 Power Mac configuration. But, I ran Aperture Checker and it said I could not install the program. This makes so little practical sense I am scratching my head in bewilderment. I'm assuming Aperture will not install at all on my system. So, unless I hear otherwise, I am going to cancel my order. What a drag.

  • Aperture compatibility with Lion 10.7.5

    Hello,
    Recently upgraded to OS 10.7.5.  Currently running Aperture 2.1.4.  What is the newest version of Aperture compatible with this OS and where can I find it?
    Thanks, Eric

    1. Aperture 3.4.5.
    2. Buy an Aperture 3 package from a source such as Amazon or eBay, install it, and click here.
    (109607)

  • Iphoto and aperture compatibility with maverick

    El iphoto no arranca. Me dice que el “iphoto” no es compatible con este Mac (una vez actualizado).
    Lo mismo pasa con Aperture 3.2.4, me dice que no es compatible.
    Me ha dejado sin poder trabajar.
    Iphoto does not work, Error message: iPhoto not compatible with this Mac.(after upgrade to Mavericks)
    Same thing with Aperture 3.2.4. Error: Not compatible

    Thank you for the info. I heve seen them in App Store, but are they free of charge ??. I asumme that i should receive SW updates for both, for free.

  • HT4757 Is there ever going to be RAW compatibility with the Panasonic Lumix DMC-FZ28 added to Aperture 3?

    Is there ever going to be RAW compatibility with the Panasonic Lumix DMC-FZ28 added to Aperture 3?
    It's a good camera which I think has been overlooked in this area?
    Any advice you good people?

    Hello,
    I don't know when but you can send a message to Apple so they can add that in a next update (not 100% sure but you can try).
    Go here : http://www.apple.com/feedback/aperture.html and in the Feedback Type select : Harware compatibility.

  • Is OSX 10.6 compatable with Aperture 2?

    I currently run 10.4 on an older Intel iMac and need to upgrade to 10.6.  However, I have software such as Aperture 2 and Microsoft Office that I would rather not have to replace.

    See this Support article:  http://support.apple.com/kb/HT3604
    General compatibility with 10.6 has been introduced by the 2.1.4 update, download it here:   http://support.apple.com/kb/DL913

  • RAW processing with PSE 3 and Fuji S9600

    I've been trying to find out how to open Fuji S9600 RAW (.RAF) files from PSE 3 (Win XP) without success! I cannot afford to upgrade to PSE 6. Is there any way I can do this as I understand the PSE RAW processor is very good?

    Download and install ACR 3.6. Be sure to follow the instructions here:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3558
    Juergen

  • Is there some secret to getting Pentax K-3 .dng files to display thumbnails when importing to an iPad (mini w/retina)? Files import fine, but no thumbnail. Mac OS has compatability with those files.

    Is there some secret to getting Pentax K-3 .dng files to display thumbnails when importing to an iPad (mini w/retina)? Files import fine, but no thumbnail. Mac OS had compatibility with those files added long ago. Am I missing something?

    I agree Terrance. However, I was able to copy other large batches of other files (my music for example) without any issues. The issue only showed up when copying iPhoto's library and/or the photos themselves. This was repeated 3 times; I copied all my other files to the drive then it unmounted on iPhoto. And, as I said, again when I started with a fresh reformat and just iPhoto. That does not seem like hardware to me if it is only happening with one set of files.
    I have managed to get the iPhoto library to work on my other external drive. It wanted a rebuild twice and a thumbnail rebuild once. I am now attempting to copy it over to the new HGST internal drive.
    Anyone have a suggestion for alternatives to iPhoto? I have aperture, maybe I will try that. But from what I understand, it just shares the same library as iPhoto.

  • How is compatibility with creative cloud products (Photoshop and Illustrator)  with Macbook Pro?  I am making a big purchase and would love some        feedback

    how is compatibility with creative cloud products (Photoshop and Illustrator)  with Macbook Pro?  I am making a big purchase and would love some   
    feedback

    Hi Frederick,
    You're spending a lot of money.  I will add my 2¢ -- -- but you must, as I assume you know, fully research your options.
    Environment:
    Start with your workspace (inc. lighting) and your clothes.
    Screen:
    The iMac screens are lovely, but not, from what I hear, monitor-grade accurate.  For critical color work, use NEC or Eizo monitors.  I use NEC, with their SpectraView II software and an X-Rite ColorMunki photospectrometer.  At the time, this was the least expensive color-calibrated workflow.
    Printer:
    Epson's are great, imho.  I use a 3880 in my studio and rent a 9900 by the hour when needed.  I have read of problems (iirc) with one of the printers in the 7000 line, however.  The take-home lesson that I filed in my brain was, "If you're going to spend the money on the 7000 line, just get the 9000 line."
    Aperture workflow:
    Aperture is a fantastic workflow tool.  Since you are adept with PS, you should set PS as your external editor.  Use Apertures formidable tools for storing and organizing your Images, and its robust editing tools for either all your proofing, or all but your most demanding editing needs.  That said, allow a good bit of time to get the feel of Aperture.  It is not at all like Bridge.  But your important choice is which RAW converter you want to use.  There is, imho, no reason to use Aperture if you are going to use Adobe's (or anyone else's) RAW converter.
    Good luck!
    --Kirby.

  • Trouble with iPhoto after latest update for compatibility with RAW-files

    Hi all, I'm having serious trouble with iPhoto since the latest update for compatibility with RAW-files for digital fotocamera's (version 2.4).
    After connection with the camera iphoto starts up as usual and i can start importing my pictures. So far all goes well. After having imported my pictures (visual with thumbs and so one) and having created an event iPhoto isn't able to show any pictures. Stopping and restarting Iphoto gives a message that there are a number of photo's available that havent been imported yet (!!???). I can choose to import or ignore. Whatever i choose i'm not capable of visualising the photo's.
    Anyone with a similar problem and the solution? Can i remove the update?
    I've tried several camera's all with the same problem.
    thx for any replies
    niki001

    Hi Terence, thanks for the reply (i'll wait with the downgrade for now ;-p).
    I made a small step by step report of my findings:
    1. Attach camera to imac
    2. iPhoto starts up with previews of the pictures (so far so good)
    3. Give event-name and start import ( so far so good)
    4. 'Latest Import'-report all fine, previews ok, check with event : previews fine. All seems well
    5. disconnect camera, stop iPhoto. As far as now all seems normal.
    6. Restart iPhoto : Message 'iPhoto Library contains photo's which havent been imported. Import Y/N?'.!!!???
    7. Option Y : IPhoto imports photo's imported in step 3 in a new event box (shown as a 'black box' on screen). Last made event (step 3) shows up as a black square in overview all events. Double click on event gives empty squares where previews should appear. Double click on photo preview gives large explanationmark on screen.
    8. Drag event-box over screen shows thumbs within square, release event returns to 'black box'.
    9. Shut down iPhoto.
    10. Restart iPhoto jumps back to step 6 as long as i keep answering Y.(Each time creating a new extra 'black box event').
    11. When i now look within iPhoto Library i can find a map Import in which i can find back the last imported photo's from step 3.
    12. Dragging these pictures to my desktop (preview gives no problem at all) and from there back in to iPhoto simply recreats a new 'black box event'.
    13. In step 6 option N gives a message 'creat iphoto Library recovered'. In iPhoto Library map Import has disapeared.
    14.When looking into map 'iphoto Library recovered' i can find my originally iported photo's. However same problem as in step 12.
    I used aperture (trial version) to see wether the problem could be photo-related, but here al goes well.
    So, any idea's???
    thx

  • Windows 8 and itunes 11 compatibility with an ipod

    I have itunes11 and Windows 8. I've called Apple and I've talked to Microsoft. This was months ago. I can download itunes and run it from my laptop but am unable to sync my ipod. I get an error and it automatically reboots my computer. I was told there were known compatibility with itunes and Windows 8.  This was months ago.
    I know how to downgrade itunes to XP or Win 7. This is not the issue. I can download to my laptop and place, it will not sync to my ipod device (which is a fear years old), but when I did talk to support I was told that it was supported. The ipod was not the issue.. It was the incompatibility between the programs.
    I see recent updates in the support community in the past month about production resolution but this still has not resolved my issue. I don't believe purchasing a new ipod is going to resolve the issue either.
    If anyone has successfully developed a workaround or recently downloaded itunes11 w/ Windows 8 and can sync to an apple ipod I would love to know how you did it.
    Kia
    [email protected]

    Im not sure that will solve the issue I have with itunes. I have a lenovo laptop and I think it's just an issue with Apple who has to modify the program for users of Windows 8 so that itunes can be used and to find purchased music. I found the music I purchased through itunes but it's not the full tracks. It said it allows me to download it fully so I can hear the whole track, but needs some kind of capatibility? I have no idea what the problem is. If someone has the answer knowing my computer brand and having windows 8 compatibility issues, please let me know what you suggest.

  • Is adobe photoshop cs2 compatable with windows 8?

    Is adobe photoshop CS2 compatable with windows 8?

    I have removed and re-installed CS2 twice now and still get the same library application error.
    DO NOT INSTALL WINDOWS 8 ONTO YOUR COMPUTER IF YOU WANT TO KEEP CS2!
    Telling us to spend more money to upgrade our software to meet OS does not show trust to the users. CS2 should be able to work with new OS systems and if not users should be allowed to update their current program for free to be able to use it on the new OS.
    Thank you,
    Eric

  • I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

    i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
    the problem is best explained on the following one - page thread: 
    https://discussions.apple.com/thread/3951518?start=0&tstart=0
    (Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
    his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
    basically, my analysis is that my controller is NOT receiving MIDI date from mainstage.  in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
     let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to. 
    now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm.  now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller!  it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch.  so i can't increase that new setting of 80 by continuing to turn the knob to the right.  i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
    i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

    Hi Josh,
    Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
    Thanks.
    Mike Towns

  • Is it possible to share an aperture library with different users using osx server.

    is it possible to share an aperture library with different users using osx server.

    Not really.  You should not be sharing an Aperture library over a network.  It's not designed for that and you'll likely corrupt your library at some point.

  • I have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?

    i have an ipod touch second gen, how can i download the facebook app if it says its not compatable with my current iOS?
    i had the facebook app but i could never upgrade it and i was ok with using the outdated version but when i reset the ipod so i could gift it to a friend it obviously got rid of the app and now i cant downloaded because it says its not compatable, how can i download the version i had before i reset it?

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

Maybe you are looking for