Aperture Crashes EXternal USB2 Drives, Now Drives can't Mount, Photos gone?

So, this is the 2nd time it's happened, with two different brands of USB2 External Mini Hard drives.
This one is Memorex, 120gb, plugged in with power and data USB cables to a powered USB2 hub. It's been working for 2 weeks now...
I loaded up aperture and it had issues and quit a couple times, so I packed up and moved to a new location.
Loaded up the computer, plugged in the drive like usual and got a "Drawing too much power, will be shut down" error about hte router, so I unplugged the HD to switch to having it plugged into both USB plugs on my laptop. Then I got the "Hard drive connection Lost" error.
Now the Hard drive won't load. The Disk Utility has only "Eject" clickable, and that gets an error. The system profiler shows the drive, as does the Disk Utility, but it's not on the desktop.
I haven't even had a chance to back up the photos I just took, since the first thing I went to do was back them up, and now it's failed.
Options, ideas?
UPDATE: Now the "Veryfiy" and "Restore" options are up, but I get this error immediately:
Disk Utility stopped repairing “ULTRA TD” because the following error was encountered:
Filesystem verify or repair failed.
AND THIS.....
** /dev/disk1s1
Message was edited by: S.F. Bay Studios
Message was edited by: S.F. Bay Studios

Very surprised at the lack of response from Apple.
These are User-to-User forums. Apple makes no promise to read these, and NEVER responds here unless an initial posting goes completely un-answered for days.
If you want a response from Apple, you need to make an appointment at the genius Bar (FREE, in warranty or out) or call AppleCare (only free if you still have AppleCare coverage).

Similar Messages

Two external FW drives - Can't mount both at same time?

Hi, I just got two new 200 GB ATA drives and I've installed them in two separate cases. I have managed to get both drives formatted and mounted, but only one at a time. If I have one drive switched on and mounted, as soon as I switch the other one on, the system hangs and I get the beach ball. If I then switch off the drive I just put on, things return to normal. If I unmount the first drive and switch it off and then turn on the second drive it mounts normally.
I have another FW drive with a different type of controller in its case (Oxford Semiconductor Ltd). I can mount that no problem and then mount either of the two new drives. The only thing I can't get to work is the the two new drives in their cases made by the same manufacturer. System Profiler says that the external cases contain Prolific PL3507 Combo devices.
I have tried every way of connecting the drives - i.e. two cables one from each drive to each FW port on my computer and also daisy chaining the drives, but I still can't get the two new drives to mount together. If I use my old FW drive and one of the new ones, I have no problem getting them both to mount with two cables or daisy chained.
So I'm stuck now - any advice I can get here will be greatly appreciated. Thanks in advance.
Powermac G4 MDD 1GHz DP Mac OS X (10.3.9) 2 GB RAM

Thanks Malcolm - Do you think it might be worth trying to flash the firmware on these cases - there seem to be updaters available on Prolific's website. Obviously I'd have to do it on a PC. I've emailed Prolific asking them about my problem. No reply as yet, and I'm not holding my breath! Do you know if there are any other posts on these boards relating to Prolific? Stupid question really - I'll just do a search...
Thanks again for your post. Cheers from Bonnie Scotland.

I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

I moved all my music from c: drive(because it was full) to an external harddrive and now itunes can't find any of my music. Is there a way to get Itunes to find music on external drive without having to place all the music back onto the c: drive? Thanks

Hopefully you moved the entire iTunes Media (or iTunes Music) folder to a new path on your external drive. Copy your iTunes library folder out to the root of the external drive, e.g. X:\iTunes (where X: is your external drive), then move the media folder inside it. Hold down shift as you start iTUnes and keep holding untila asked to choose or create a library. Choose the library at X:\iTunes\iTunes Library.itl. Should all be good.
Failing that, download and run my FindTracks script and point it at the new location of your media folder.
tt2

I have just selected all my desktop icons and accidentally deleted them. This included my external hard drive with 22,000 photos in iPhoto. I cannot open iPhoto now. Can someone help please?

I have just selected all my desktop icons and accidentally deleted them. This included my external hard drive with 22,000 photos in iPhoto. I cannot open iPhoto now. Can someone help please?

What is the file system of that external HD? is it MacOS Extended (Journaled)?
Which iPhoto version do you have?
If you directly select the iPhoto Library in the Finder and use "File > Get Info", does the library still show as "Kind: iPhoto Library" and is the file size correct for 22000 Photos?
If the library does no longer have the correct size, restore it from your backup.
But if the library has the correct size, try to open it directly by clicking it. This should work, if your iPhoto version is iPhoto '11.

Backing up Aperture to External Hard Drive

Can anyone help please. I want to use an external hard drive to store my Photos on . I use aperture 2 to download and adjust my photos on my Macbook , but obviously I don't want to use all the hard drive up on my Macbook. I want to use the external drive to work with my Aperture images.
Can this be done and if so how do I do it ?. I already have one external drive for time machine but that does seem to have saved any of my images.

IMO generally most useful to help keep drives underfilled and fast (drives slow as they fill) is to manage by Reference ("referenced images") as in the workflow outline below where Master images can live anywhere.
What this means is that the Library that manages the show and keeps any edits you make lives on your internal hard drive for best performance. To avoid overfilling (more than ~70% full) your internal drive, Master images live on external hard drives and are Referenced by the Library during editing. By generating screen-resolution-sized Previews you can still look at full screen images when the external hard drives are not connected.
I feel pretty strongly that card-to-Aperture or even camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the CF card from the camera and insert it into a CF card reader. Faster readers and faster cards are preferable, and Firewire is much preferable to USB2.
• Finder-copy images from CF to a labeled folder on the intended permanent Masters location hard drive.
• Eject CF.
• Burn backup hard drive or DVD copies of the original images (optional recommended backup step).
• Eject backup hard drive(s) or DVDs (optional recommended backup step).
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images."
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing).
• Reformat CF in camera, and archive DVDs of originals off site.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media.
It works equally well to allow Aperture to keep Masters in the Library itself ("managed images"), but at the cost of a rapidly growing Library size that ultimately outgrows the fast capacity of a single hard drive. The difference is that with managed images Vault backups include the Masters, while with referenced images Masters are maintained outside of Aperture and are not backed up in Vaults.
The Aperture Help Menu has more on this if you search on managed images and on referenced images.
-Allen Wicks

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

I use My Time Capsule as a external hard drive, can I transfer files other than wirelessly?

will TC appear on My desk top?
It will, if you do the following:
Open Macintosh HD and locate the Time Capsule icon under the SHARED heading on the left side of he window.
Click on the Time Capsule icon and a folder representing the drive will appear to the right
Double click the folder and the drive icon will appear on the desktop

HT1751 if I move my iTunes library to an external hard drive can my computer access these files in iTunes or do I need to move them back to play music, watch movies, etc.???

If I move my iTunes library to an external hard drive, can my MacBookPro access these files in iTunes or do I need to move them backto my MacBookPro to play music, watch movies, etc.???
Trying to alleviate some disc space on my Mac!!!

Yes, it can. Launch iTunes with the Option key held down and navigate to that instance of the library.
(86939)

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

My disc drive on my imac does not appear to be working. It takes the disc in but then spits it out without reading it. I have thought about purchasing an external disc drive, can someone advise me please?

Try the following:
In Finder, select the problematic volume and then press command-I.
Expand the Sharing & permissions section if it's collapsed.
If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
Tick/check Ignore ownership on this volume.

In which folder of my Seagate 3TB external hard drive, can I find my iPhoto photos from my iMac (iOS X Maverick)?

In which folder of my Seagate 3TB external hard drive, can I find my iPhoto photos from my iMac (iOS X Maverick)?

tlah wrote:
The Seagate 3TB external hard drive backs up the entire internal hard drive of the iMac.
Is this external drive a Time Machine backup?
Then find what you want using Time Machine (or whatever application you used to make the backup).
Your iPhoto pictures are in the iPhoto library in Users/Pictures.

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

I recently used an external hard drive to back up photos etc from my mac, I didn't do a full system back up. Since then a finder window titled 'client node' keeps popping up every time i hit the spacebar. Can anyone help me please stop this happening?

Click on it, choose Get Info from the File menu, and check the format.
If it's formatted as NTFS, reformat it as MS-DOS, exFAT, or Mac OS Extended (Journaled) as desired, or install software such as Paragon NTFS on the computer.
If it's formatted as FAT32 or exFAT, use the Disk Utility's Repair Disk command on it; this may also happen for a flash drive which is about to fail.
If it's formatted as Mac OS Extended, click Authenticate and provide your administrator password, or change the permissions on that specific folder in its Get Info window.
(109318)

I have an external hard drive, can I set a password on this? The drive is already populated with data

I have an external hard drive, can I set a password on this? The drive is already populated with data

ITs an old Iomega 100gb external HD that has about 90gb of music on it. The Macbook has a 500gb HD. I would like to put the iTunes library on the internal HD so I have room to expand.
Phil0124 wrote:
You can copy it to the internal hard drive as long as it fits on it. How big is your library, and how big is your internal HD?
The only thing you do not want to do is over-stuff the internal hard drive. The OS needs some space to operate correctly, so if your iTunes library uses up more than say 80 to 85% of the internal HD's available space it may not be a good idea to transfer it over.
With that said, the internal HD will provide slightly faster access to the library than the external would, but other than that, you can point iTunes to the external drive just fine.

HT1338 cannot mount my external hard drive can anyone help?

I was using an external hard drive to store my photos and had set up mac to upload pictures to the drive. was fine for 3 years suddenly its just gone. I've run disk Utility and it says everything is fine but the drive will not mount even after repair.

Odd, it seems. In the Finder "Get Info" display, you are seeing something like this?
Click the "Details" triangle and then the little padlock, and you should be able to change the permissions. Click the lock when you are done and close the Info window.

How do I backup my iPhoto Library to an external hard drive and keep my photos grouped by their events?

How can I backup my iPhoto Library to an external hard drive and keep my photos grouped by their events?

I have attempted to make sure my iPhoto library has been backed up on the external hard drive and that it is safe to delete some events from my internal hard drive
You need to think this through.
Time Machine is a back up application. It keeps a rolling back up of the data. It's called rolling because it means you can revert to the data you had on a specific date and time. But that's not eternal, and as time goes by, and your drive fills up, older backups are deleted. So if you delete Events on your Mac they will - eventually - also be deleted from the Time Machine back up.
If you wan tot archive data hendon't use Time Machine for that job. Here's how you might archive an iPhoto Library:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

External Hard Drive Won't Mount- Need to recover files

Hello Everyone,
I am hoping that one of you fine mac experts may be able to assist ~
Problem: External Seagate FreeAgent Desktop USB external hard drive
won't mount on desktop=ie: no access to my important files.. Please Help!
Details:
External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
(using for document / file backup-not as a startup disc)
on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
~
Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
and got the "beach ball of death" and needed to restart.
My trusty G3 started up fine, however, the external HD was now
not showing up on the desktop as normal. I troubleshooted -by restarting,
trying different a/c plugs/ different USB ports , ran disk utility..called
seagate -not much help . Seagate said to try the HD on another mac-which I did-
a G5 tower- same problem.
~
The External hard drive will show up in disk utility, but is grayed out.
and when click "mount" same two messages keep showing:
message 1: "a disk attempting to mount as unknown has failed verification or has failed to
mount.please use disk utility to check the disk"
~
message 2- when unplugging and repluggin the usb in-and upon
restart:" you have inserted a disk containg no volumes that mac osx
can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
~
( I really need access to these files- and do not want to re-initialize the HD!!)
I ran Disk Utility /first aid "verify & repair , the following info came up:
Repairing disk "main backup 2007 ".
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid key length ( <<<IN RED )
Repair completed. "
~~
Though it said the repair was completed, the "invalid key length" issue
still comes up when re-running disk utility...Hard drive would still not
mount on desktop-even after restarting .
~~~~~
If there is a mac genius out there that can help?- it would be greatly
appreciated. I have tried to call seagate several times in the last several hours-
1st time-they disconnected me after being on hold 10 minutes-2nd call
I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
~~~
At this point, I am hoping to just get the files and photos off
the hard drive- I heard about Disk Warrior-should I use that and if so
what version?
Thank you very much!
L

Will zapping the PRAM be of any use in getting the external to mount on the desktop?
Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
Have you ever used Disc Warrior and is using it complicated?
I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
My other thought was to take the external HD there and have them try to recover the files.
Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

External Hard Drive won't mount on desktop!

Hey, guys.
I ran into a problem this morning that I've never ran into before and I wasn't sure where to write it but I thought this is best.
Here it goes...
Last night I had a power surge and when I restarted my computer, my external hard drive did not mount on my desktop. I than proceeded with restarting my computer, I relinked all my connections and I cant seem to get it fixed. I have a lot of material on my external drive that I dont have backed up (I know, a stupid move) anyways, I dont want to lose that information. Also, when I open up disk utility, the icon for my external drive is there and the partition I made for my external drive shows up also but the title of my partition for my external hard drive is not in bolded font. I tried to click the button to mount my external drive cause the specs tell me that it is not mounted but when I press the mount button, it does nothing. I than tried clicking the unmount button and than restart my computer and still nothing.
What problem am I facing and how can it be fixed?
Thanks.

Dear Jason,
Gary's advised is, IMHO, a very sound one.
The only thing I can think of about your problem, given the information you have provided us, is to run Disk Warrior on your external HD.
In fact, DW is particularly indicated in events, like:
"...you should run DiskWarrior when you suspect that there is directory damage on one of your disks. Directory damage can result in the disk not mounting (not appearing on the desktop when the computer is started), missing files or folders, an inability to move or copy files, or crashes when files are used...".
You could actually buy your copy of DW Licence on-line and download it directly onto your internal HD, starting from this "Information you must read before you make your purchase" page. A hardware copy of the software you have so purchased, will follow by postal service (or currier, if so you choose), shortly.
Follow all the instructions you will find in the download to install the DW software onto your main internal HD and then run it on your external hard drive.
DW has saved my data several times and in similar situations as you are experiencing. IMHO, you should seriously give it a try and, even in the unfortunate event it does not manage to solve your problem, it is one of those Mac OSX utilities which ANY Mac power user MUST have handy at all times.
So, no matter what, my opinion is that it is always well-spent-money those used to purchase your copy of DW: in the long run, you won't regret it.
In the event that even DW is unable to retrive your precious data, my suggestion is to contact Micro Com data recovery. It's going to cost you some money, but if you make a leaving out of the data you've lost on your external hard drive, it's going to be worth it.
All the best.
Costa

Aperture Crashes EXternal USB2 Drives, Now Drives can't Mount, Photos gone?

Similar Messages

Maybe you are looking for