Aperture crashes whenever using the menu 'File' or 'Help'

Hi,
since some time Aperture (2.1.4) crashes whenever I click the menu "Ablage" ("File") or "Hilfe" ("Help") from the menu bar. The same holds true using a new preference file or using a completely new and empty library, or using my version (2.1.3) recovered with Time Machine.
Closer inspection reveals that the crash (spinning ball and '..does not react') occurs whenever I click the menu "File" or the menu "Help". The other menues work correctly, and all images can be edited, exported or imported etc.
I tried to download a new test version of Aperture, but this recognizes immediately my access code, and everything starts again.
Can somebody advise me to overcome this problem?
Best regards and merry Christmas
JG

I had a similar problem. I solved it with these instructions on my blog.
http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
Max

Similar Messages

Aperture crashes when using the Crop Tool

I have tried using Aperture in 32 and 64 bit modes. I have the same problem in both when using the Crop Tool. Immediately after I hit "RETURN" key to finalize the crop I have chosen, the VIEW screen goes blank and the SPINNING BEACH BALL appears. I go to the "Force Quit" dialog and Aperture is highlighted in red--signifying a crash (unresponsive application).
THIS is happening more frequently.
Help!!

I had a similar problem. I solved it with these instructions on my blog.
http://maximegousse.wordpress.com/2010/12/05/my-aperture-library-crash/
Max

Safari crashes when using the dialog box to import/save files, in facebook under windows 7

I've encountered the following errors in some PCs, running Safari 5.1.7 in MS-Windows 7 Pro:
Safari crashes when using the dialog box to import/save files. One doesn't have to actually upload or download any file, the mere invocation of the relevant dialog box brings down all open Safari windows after a couple of seconds.
Errors displayed in the Event Log are:
Όνομα ελαττωματικής εφαρμογής Safari.exe, έκδοση 5.34.57.2, χρονική σήμανση 0x4f982b5e
Όνομα ελαττωματικής λειτουργικής μονάδας CoreGraphics.dll, έκδοση 1.87.0.0, χρονική σήμανση 0x4f9739a0
Κωδικός εξαίρεσης: 0x40000015
Μετατόπιση σφάλματος: 0x0013a762
Αναγνωριστικό ελαττωματικής διεργασίας: 0x17f4
Χρόνος έναρξης ελαττωματικής εφαρμογής: 0x01cded6b09576023
Διαδρομή ελαττωματικής εφαρμογής: C:\Program Files\Safari\Safari.exe
Διαδρομή ελλατωματικής λειτουργικής μονάδας:C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
Αναγνωριστικό αναφοράς:ebe64ac9-595e-11e2-a977-0016356671d1
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:00.000000000Z
EventRecordID
95609
Channel
Application
Computer
computername
Security
EventData
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
17f4
01cded6b09576023
C:\Program Files\Safari\Safari.exe
C:\Program Files\Safari\Apple Application Support\CoreGraphics.dll
ebe64ac9-595e-11e2-a977-0016356671d1
and
Ελαττωματικός κάδος (bucket) 2970527469, τύπος 1
Όνομα συμβάντος: APPCRASH
Απόκριση: Δεν υπάρχει
Αναγνωριστικό Cab: 0
Υπογραφή προβλήματος:
P1: Safari.exe
P2: 5.34.57.2
P3: 4f982b5e
P4: CoreGraphics.dll
P5: 1.87.0.0
P6: 4f9739a0
P7: 40000015
P8: 0013a762
P9:
P10:
Συνημμένα αρχεία:
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
Αυτά τα αρχεία μπορεί να είναι διαθέσιμα εδώ:
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
Σύμβολο ανάλυσης:
Επανέλεγχος για λύση: 0
Αναγνωριστικό αναφοράς: ebe64ac9-595e-11e2-a977-0016356671d1
Κατάσταση αναφοράς: 0
+
System
Provider
[ Name]
Windows Error Reporting
EventID
1001
[ Qualifiers]
0
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2013-01-08T06:45:10.000000000Z
EventRecordID
95610
Channel
Application
Computer
computername
Security
EventData
2970527469
1
APPCRASH
Δεν υπάρχει
0
Safari.exe
5.34.57.2
4f982b5e
CoreGraphics.dll
1.87.0.0
4f9739a0
40000015
0013a762
C:\Users\username\AppData\Local\Temp\WER51A.tmp.WERInternalMetadata.xml
C:\Users\username\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_Saf ari.exe_e273f639ef3d86d52c9d8e15dd2b42dce3e78061_1f86213d
0
ebe64ac9-595e-11e2-a977-0016356671d1
0
I have tried in-installing safari but it seems not to help. I have tried installing it to a third, newly installed pc and come to the same result.
All PCs are fully up-to-date as it regards Microsoft and Apple patches. Any ideas as to why this might happen?

Still having the same problem. Ever the optimist, I submit the following info.
Error window screenshot can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_01.JPG
Enent log entry can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_02.txt
Version info can be found here: https://dl.dropboxusercontent.com/u/22465174/safari/safari_fail_03.JPG

Importing multiple files using the Import File menu.

For some reason I am never able to add more the 5 mp3 files using the Import File menu. All of my files are located on the NAS device and if I select the Import Folder menu all the files in the folder will be imported. However, time after time I add more files to the same folder and then need to import just the new files to iTunes. For that I am using the Import File menu. If select more then 5 files, only 5 files will be imported. Some times I have 100 new files that I want to add, and moving 5 files a time is time consuming and painful. I try opening the folder, selecting all files and dropping them into iTunes, but that did not work. Is there a way to import more than 5 files at a time, or iTunes is not capable doing that?

I am often surprised how many ways there are to add songs to iTunes. Selecting a number in the open file dialog must have a maximum string length for the file names. I bet that the path and file name are long on those songs and that is why you can only load 5 at a time from your NAS. What I have had luck with and is very easy is to select a group of songs and right click and "play" them. My iTunes is set to import and organize on play. The first song starts playing and they all load. I routinely do this with entire albums without problem.
Paul

Muse crashes randomly when using the place file/image function. And is slow!

Hi guys,
I am using a MacBook Pro Retina i7 with 8GB ram. I installed the trail version of Adobe Muse and I am really liking the product so far, except that it crashes a lot, randomly, when I sometimes use the place file or place image function. (Command-D) Muse is also slow. I have little apps running, plenty of free space etc but Muse is sluggish, lags and crashes a lot.
Is there a known reason for this? This is preventing me from considering to buy the program.
Please help,
Regards,
Riaan

Thank you for that.
I will give it a try. Two things I noticed, I do have column view on, but sorted by type and then secondly I am placing images from my Google Drive and DropBox folder..
Will report back once I have had a chance to test it again.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

Is it possible to make an animated drop down menu and still use the menu widget?

Hi- I am trying to create a menu bar that is hidden with just a tab exposed to indicate that there is a menu there. Upon rollover, the full menu bar slides down and reveals the menu items. I can't find a way to make it smoothly slide down so I settled for the Photoshop button and just moved the button position in Photoshop to fake it. The problem is now I need to find a way to still use the menu widget along with this. if that can't be done, can I use the Photoshop button and populate the menu there and abandon the menu widget?
Someone suggested using Edge Animate ( why the hell is this a separate software from Muse?) to make the animation. If that's a possibility, can the menu widget be used with the Edge file that's imported? please help me get to where I need to go however it needs to happen! Thanks in advance.
Here's a link to a screenshot of my menu: http://www.groovindj.com/menu.jpg
Here's a site that does pretty much what I'm looking to do... www.bagigia.com

Ok, thanks! I have another way to do what I'm trying to do, I just thought it might be better to do it this way. Obviously I was wrong!
Thanks again!

Why Aperture doesn't send the RAW file to Photoshop

I've seen the complaint about Aperture not passing the original RAW file to Photoshop in several places in this forum. I think I have a reason for why Aperture doesn't work this way.
The reason has to do with the 1st law of digital RAW photography. "Never, ever, overwrite the original RAW data from a camera's RAW format file."
Because of the above rule, both Aperture and Photoshop do not actually work on the original RAW file. They transform the RAW image data into a usable image using user specified settings (which may be the camera's default setting for that image). The original RAW file is left untouched.
When you open a RAW file in Photoshop and try to save it, you'll be prompted for a new file name. You wouldn't want to overwrite the original RAW file by writing the edited image data back to it.
When you edit an Aperture RAW file using Photoshop as the external editor, Aperture first creates a TIFF or PSD version image file in its library and then passes that file name to Photoshop. Photoshop opens the TIFF or PSD file and directly edits it. Since this version file is already in Aperture's library, when Photoshop is finished editing it, Aperture automatically sees the edited file because its already in the library.
If Aperture were to send the RAW file name to Photoshop, Photoshop would open the RAW file and create a new PSD file. When it came time to save your edits, where would you save it. In order to get it back into Aperture's library, you would need some form of Photoshop to Aperture communication so that Photoshop would know where to save the edited file and Aperture would know to add it to the library. This would require collaboration between both Adobe and Apple and doesn't seem likely.
I have a couple of ideas someone can try. These are only ideas and completely untested. I'd do it myself but I don't own Aperture (see my computer info below for the reason).
1. Create two folders with automator actions. You export your RAW files from Aperture to a "Photoshop-IN" folder. Any new RAW image found in this folder will be automatically opened in Photoshop by the Automator action. Then you save the edited Photoshop file into a 2nd folder "Aperture-IN". Another Automator action imports this into Aperture.
2. In iPhoto, if you try to edit a RAW image with an external editor, iPhoto creates an intermediate image file (JPEG I think) which it passes to Photoshop. But, if you drag the original RAW image thumbnail from iPhotos library window to the Photoshop icon in the dock, the original RAW image file is passed to Photoshop. You only have the problem of getting the saved Photoshop file back into iPhoto's library. Maybe this same thing would work in Aperture by dragging the Master image to the Photoshop icon in the dock.
PowerMac G4 Dual 1.25GHz Mac OS X (10.4.3) FW800, 4 internal HD - 550GB

This is all well and good. I wholeheartedly agree with the idea of keeping the "master" sacrosanct. What I object to is not being able to do the conversion in Photoshop (or elsewhere)
What I want is for Aperture to send the raw over to photoshop when I select "open in external editor", and then follow the current workflow (I do my edits, hit save, and a second master is added to Aperture's db.)
It's totally possible for them to do this, and it wouldn't break anything in the system, or the philosophy. Of course it's a workaround that wouldn't be necessary if Aperture's converter were up to snuff. But it isn't, and I bet it would be easier to implement the workaround than to fix the fundamental defects in the converter itself.

New Canon Rebel XSI, and Aperture won't read the .CS2 files properly??

Hello all,
I have read through the posts but didn't fine one that answered my question. I just bought a Canon XSI and tried to upload my RAW files to Aperture, and first it showed the "unsupported image format" red screen. After messing around I could get it to see the images, but they were the size of thumbnails. It will read the JPG files fine. The Aperture site says that the CR2 files should work. I also tried deleting the rawfile in the system folder and re-ran the installer for 2.1 update, didn't change a thing. My Aperture version is 2.1.1. Any ideas?
Thanks,
John

Lucked out and figured out the real problem thanks to Mark Olson's blog:
http://markolson.ca/2008/07/17/canon-eos-450d-rebel-xsi-cr2-raw-on-mac/
It turns out that the problem was related to RAW+JPG. Mac does not import the RAW files properly and I should have suspected this being the problem when I noticed the RAW file size was way too small (exact same size as the JPG file).
Luckily I had not deleted the files from my memory card so I was able to go back and import the RAW images again. Now at this point I'm going to ask Steve to cover his eyes because I had to use Vista to download the files!
All seems ok now.

How can u get the matching percentage whenever compare the pdf files(compare the strings)

Actually I want matching percentage whenever compare the pdf files.First I had completed
read the pdf files content into string
my code like as
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.Windows.Forms;
using System.IO;
using iTextSharp.text;
using iTextSharp.text.pdf;
using iTextSharp.text.pdf.parser;
namespace WindowsFormsApplication1
public partial class Form1 : Form
string str1;
string filename;
string path;
string str2;
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
OpenFileDialog openFileDialog = new OpenFileDialog();
openFileDialog.CheckFileExists = true;
openFileDialog.AddExtension = true;
openFileDialog.Filter = "PDF files (*.pdf)|*.pdf";
DialogResult result = openFileDialog.ShowDialog();
if (result == DialogResult.OK)
filename = Path.GetFileName(openFileDialog.FileName);
path = Path.GetDirectoryName(openFileDialog.FileName);
textBox1.Text = path + "\\" + filename;
private void button2_Click(object sender, EventArgs e)
OpenFileDialog openFileDialog = new OpenFileDialog();
openFileDialog.CheckFileExists = true;
openFileDialog.AddExtension = true;
openFileDialog.Filter = "PDF files (*.pdf)|*.pdf";
DialogResult result = openFileDialog.ShowDialog();
if (result == DialogResult.OK)
filename = Path.GetFileName(openFileDialog.FileName);
path = Path.GetDirectoryName(openFileDialog.FileName);
textBox2.Text = path + "\\" + filename;
public static string ExtractTextFromPdf(string filename)
using (PdfReader r = new PdfReader(filename))
StringBuilder text = new StringBuilder();
for (int i = 1; i <= r.NumberOfPages; i++)
text.Append(PdfTextExtractor.GetTextFromPage(r, i));
string result = text.ToString();
return result;
public static string Extract(string filename)
using (PdfReader r = new PdfReader(filename))
StringBuilder text = new StringBuilder();
for (int i = 1; i <= r.NumberOfPages; i++)
text.Append(PdfTextExtractor.GetTextFromPage(r, i));
string result1 = text.ToString();
return result1;
private void button3_Click(object sender, EventArgs e)
str1 = Form1.ExtractTextFromPdf(textBox1.Text);
str2 = Form1.Extract(textBox2.Text);
}Finally how can u get the matching percentage whenever compare the pdf files(compare the strings)please help me.thank u

Hi,
Based on your code, I see your code related to
iTextSharp Pdf.
iText is a third party library to create PDF originally written for java. iTextSharp is
the C# adaptation of that library.
Question regarding iText are better asked on the iText forum, rather than the Microsoft Forum:
http://itextpdf.com/support
Thanks for your understanding.
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise

PSE crashes when using the Detail Smart Brush plenty of memory and speed -please advise

I have a similar thing happening here, but on my aging iMac8,1 (3.06, 6 gigs of ram, plenty of internal and external scratch space) No wacom here, a Logitech mouse though, running via USB overdrive.
With me it's undos that are typically causing the hang, and as such, I notice it happening and don't keep clicking around. It hangs for anywhere from 30 seconds to 3 minutes or so and then I can continue working. Once, it was happening on a document I had open for a while, once it was occurring on a file I opened, made an errant click, and hit undo. This was a 46.6 MB CMYK tif. I also had it occur while drawing a simple selection with the polygonal lasso - each time it would hang on the third click. That time, it would unhang, but then the selection would be all messed up and not display what was being selected.
Each time it happens, I see photoshop pinned at 99-100% in iStat. Doesn't seem to be related to running out of memory, as there is usually a good amount free when it's happening. I tried using the internal drive as the swap, and that didn't seem to matter.
I've been forced to go back to CS5 for the time being, but would love to see this solved. Is there any further info I could provide?

PSE10 Organizer crashes when using the "find a missing person" button

I have been using PSE10 for about six months and have about 10500 images in the catalog, mostly digital but also some scanned slides I have been gradually adding. All images have been added using the "find files" button. I have been making use of tagging by using the people recognition routine and have reached the point where PSE10 says all people have been found. Since then I have gone through about 1000 individual images using the "find a missing person" button with good success until recently. Now when I try to save the tag after using the button Organizer crashes with the message "Elements 10 Organizer has stopped working. A problem has caused the program to stop working correctly. Windows will close the program and will notify you if a solution is available". I have tried optimizing and repairing the catalog without sucess. I have also tried uninstalling and reinstalling PSE10, also without success. The catalog is in a custom location but has been since shortly after I started using PSE10 and well before this problem started. With the amount of time and effort spent doing this tagging I would not like to have to start over with a new catalog if a solution can be found. My computer is Vista 64-bit with 8GB memory. This problem is driving me nuts!! HELP!!

Log Name:
Application
Source:
Application Error
Date:
6/17/2012 2:43:28 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
KenMary-office
Description:
Faulting application PhotoshopElementsOrganizer.exe, version 10.0.0.0, time stamp 0x4e5e9821, faulting module BreezeDB.dll, version 2.0.1.1, time stamp 0x4c7c52ec, exception code 0xc0000005, fault offset 0x00023fa6, process id 0x1318, application start time 0x01cd4cd20c7d9d2c.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2012-06-17T21:43:28.000Z" />
<EventRecordID>93684</EventRecordID>
<Channel>Application</Channel>
<Computer>KenMary-office</Computer>
<Security />
</System>
<EventData>
<Data>PhotoshopElementsOrganizer.exe</Data>
<Data>10.0.0.0</Data>
<Data>4e5e9821</Data>
<Data>BreezeDB.dll</Data>
<Data>2.0.1.1</Data>
<Data>4c7c52ec</Data>
<Data>c0000005</Data>
<Data>00023fa6</Data>
<Data>1318</Data>
<Data>01cd4cd20c7d9d2c</Data>
</EventData>
</Event>
Thanks in advance for any help you can give me. There were several error entries for PSE all of which had the same description up to but not including "process ID". This was the result of restarting PSE10 several times. Information above is from the last restart.

Aperture refuse to open the RAW files from my new Nikon D7100.

Aperture refuse to open the RAW files from my new Nikon D7100. What can I do? Thanks for help!

the raw support of new cameras will be made with a Digital Camera RAW Compatibility Update not with a aperture update. But when the new RAW- Update will arrive is not sure.
And that usually can only be installed with newer Aperture versions. You cannot use the latest raw support with Aperture 3.2.4, unless you are able to update to Aperture 3.4. And earlier raw support versions cannot be used with Aperture 2.
See the footnotes on the Raw Support page http://www.apple.com/aperture/specs/raw.html. That is why asked for the Aperture version.
** Requires Aperture 3 or later.
*** Requires Aperture 3.4 or later.

Instead of using the make file can you build nirlpk.sys using MS WDK 8.0 on VS2012?

After downloading the NI nimhddk_windowsWDM-2 and -1
Instead of using the make file I built nirlpk.sys using MS WDK 8.0 on VS2012
I copied the source files out of the dir /nirlpk to the MS template for WDM drivers
It built after turning warnings as errors off.
After uninstalling the NI_DMX driver I tried to install the RLP driver that consisted of nirlp.inf and nirlpk.sys
I got this message:
Windows found driver software for your device but encounted and error while attempting to install it.
PCI-6602 RLP WDM
Driver is not intended for this platform
Is the nirlp.inf file correct for loading on Windows 7 64 bit?
Any ideas?

I have now altered the example along lines
suggested by ghaneman*, who pointed out that
a trusted application did not need to use the
FileOpenService/FileContents just to get an
InputStream.
* Mentioned on 'File associations / sandboxed app.'
http://forum.java.sun.com/thread.jspa?threadID=785224
The altered code is..
/** Load a file into the editing area.
@param path A string representing the path to the desired file. */
public void loadFile(String path) {
    // first try as if this were a trusted application..
    if (!path.equals(".")) {
        try {
            FileInputStream inputStream = new
                FileInputStream(path);
            loadFile(inputStream);
        } catch (Exception e) {
            // we do not have trust, use the FileOpenService
            loadFileByFileService(path);
    } else {
        // we only have a directory, use the FileOpenService
        loadFileByFileService(path);
public void loadFileByFileService(String path) {
    try {
        if (fileOpenService==null) {
            fileOpenService = (FileOpenService)ServiceManager.
                lookup("javax.jnlp.FileOpenService");
        fileContents = fileOpenService.openFileDialog(path, xtns);
        // the user may have cancelled the action..
        if (fileContents!=null) {
            loadFile( fileContents.getInputStream() );
    } catch(UnavailableServiceException use) {
        use.printStackTrace();
    } catch(IOException ioe) {
        ioe.printStackTrace();
}If the user launches the trusted version, and
selects 'always trust' for the (self signed)
certificate, the end user can thereafter double
click a file and see it appear in the application's
editing area with no further user interaction.

How can I auto export a PDF File using the "Smallest File Size" preset and set the Exported File Name based on information from an Imported PDF?

Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
    myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
    myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
    myWin.myPDFExport.selection = 0;
    myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
    var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
    myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
    if(myFile != null){
        app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
    }else{
        alert("No File selected");
}else{
    alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!

If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.

Aperture crashes whenever using the menu 'File' or 'Help'

Similar Messages

Maybe you are looking for