Aperture does not recognize Internet connection with SmugMug

When I try to add an account for SmugMug, the Accounts dialog box shows, "Your computer is not connected to the Internet. Aperture needs an Internet connection to login to SmugMug."
I added a Flickr account with no problems. How can I get Aperture to recognize that I have an Internet connection for SmugMug?

jscorbin wrote:
** Workaround **
The problem appears to be with some routers in the network -- for example my Netgear R6300. When I hooked my iMac (running Mavericks) directly to the cable modem with an Ethernet cable, Aperture was able to authenticate with the SmugMug service (using Safari). The Apple Professional Applications technician suggested trying that, and it worked.
After replacing the original network configuration, where the iMac is connected through the Netgear router, Aperture maintained the SmugMug shared service, and I was able to upload and download photos with SmugMug.
Confirmed that this insane workaround did work. ***, Apple and/or SmugMug? This should be fixed. It doesn't jive with Apple's "ease of use" software mantras.
BTW -- I have a Netgear WNDR4500 v1 in between the world and my Mac.
IronChefMoto
Message was edited by: IronChefMoto

Similar Messages

WRT150N v1.1 does not recognize internet connection

I have had this router stored since I have never been able to get it working, but today I want to try everything possible, and I have, i upgraded the firmware, i backed up the the configurations, restored the configurations, i power cycled, everything that those pages from linksys support show you, but still easylink advisor does not recognize my internet connection, i am obviously online since i am on this page, so I don't know what it is.
Solved!
Go to Solution.

There is nothing wrong with your router, you should Update Linksys Easylink Advisor

Initial sync between Desktop Manager and 8320 does not recognize internet connection

Am unable to do an initial sync between Desktop Manager and BB Curve 8320. Am getting error The computer must be connected to the Internet in order to initially configure synchronization settings. Please ensure that you are able to connect to the Internet and try again. Tried with version 4.3 and 4.6.0.12. I have a broadband connection that is always on and have also tried wirelessly. Any suggestions are appreciated.

Hi,
First we need to do a clean install of the DM you have on, this will clean up the other installation as well,
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...
After you are down download DM 4.5 with NO MEDIA MANAGER from here:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Just for trouble shooting purpose, turn off firewall and virus checkers,
Bring DM, go through the setup wizards, connect your BB and do a BACKUP first
Let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Does not recognize Internet connection for 1.2.1 update

After updating iTunes to 7.0.2, information tells me there is an iPod update 1.2.1. After I hit either "download and install" or "download only" it informas the of error:
iTunes could not contact the iPod software update server because you are not connected to the internet. Make sure you are connected to the internet"
I am connected! what is the deal?

http://docs.info.apple.com/article.html?artnum=304468

My N8 does not recognize or connect to unsecured w...

My N8 does not recognize or connect to unsecured wifi network. I don't know why but even my old N82 picks up unsecured wifi networks without a problem.
Does anyone know why? I need help please.

I cehcked both settings and none picks up unsecured wifi. It only picks up 2 or 3 wifi networks in a range of about 14 wifi networks.
Tekky wrote:
cjlim wrote:
There is no reason why your N8 won't connect to unsecured wifi. I do all the time with mine.
Have you actually tested it out with an unsecured access point where your N82 sees it but not the N8.
The only setting I can think of that could possibly cause this is Settings>Connectivity>Settings>Switch to WLAN, if you set this to Known Wlan's only, you need to first add this wifi as a new access point before you can use it with most apps.
Yes, I have tested it with my N82 and my laptop also. Both the N82 and the laptop pick up the unsecured wifi network but not the N8. I checked the settings and even called for tech support but they couldn't even help me. I was told that I they are going to look into it. I might have to have to send the phone in for a replacement.

After sleep, retina MacBook Pro (Mid 2014) does not recognize usb connected mouse movement

After sleep, retina MacBook Pro (Mid 2014, on 10.9.4) does not recognize usb connected mouse movement. I have tried a generic usb mouse and my Razer Deathadder usb mouse. Both mice work before sleep; but after sleep, the computer no longer recognizes mouse movement while still recognizing the mouse buttons when pressed. Any idea why this is occurring?

Hello, chocotac0.
Thank you for visiting Apple Support Communities.
Here are some troubleshooting steps that I would recommend when experiencing this issue.
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
OS X Mavericks: If a USB device isn’t working
http://support.apple.com/kb/PH13876
Cheers,
Jason H.

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the ST card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Aperture does not recognize that there are images to be imported on an SD card. My workaround is to copy the images from the SD card to a folder and then import the images from the folder. Aperture also imports incredibly slowly after the update to 3.4

Check your Import settings in the Import Panel, i.e. all that might exclude the image type you want to import:
If you did not exclude any file types, and still Aperture will not import, remove your ImageCapture preferences fro your user library:
To remove the image capture preferences:
If Aperture is running, quit Aperture, and log off and on again.
Open your user library from the Finder's Go menu: Hit Command Shift G (⌘⇧G) and then type in: ~/Library/Preferences/ then hit return.
In the window that opens remove "com.apple.ImageCapture.plist"
and look into the subfolder "ByHost": if there are files named com.apple.ImageCapture something .plist remove them too.
then try again.
And if that still does not help, remove the Aperture preferences as well:
~/Library/Preferences/aperture.plist
Regards
Léonie
P.S. in MacOS Lion and later the user library ~/Library is hidden by default.
You can reveal it also from the Finder's "Go" menu:
Finder > Go, then hold down the options ⌥ key, until the Library appears in the drop-down menu, select it and open the Library folder. Then go to the "Preferences".

AE2014 does not recognize Quadro 4200 with Tesla K20.

Hello.
AE2014 does not recognize Quadro 4200 with Tesla K20. As I can see in this datasheet System requirements | After Effects, theese devices are not listed as capable. Is any chance to get it work? Should I install a special Nvidia driver or do something else?
Thank you in advance.

Yes, but there is very little reason to do that.
The only thing in After Effects that uses CUDA is the GPU acceleration of the ray-traced 3D renderer, and that feature is obsolete and being phased out. There are better ways to do 3D in After Effects, including using Cinema 4D (which is included with After Effects).

Ovi Suite/PC Suite does not recognize the connecte...

Error message: "Ovi Suite/PC Suite does not recognize the connected phone.Ovi Suite/Pc Suite cannot read the required information from the phone.Check that the connected phone is supported by Ovi Suite/PC Suite".
You can try this which can solve your problem.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

@ Omarbooyaka,
Welcome to the forum! You should use Nokia Suite to update your device to Belle. If still the same, please go to control panel > printer and devices > right click the phone icon > remove the device. Then try to connet again. Also try all the steps provided by magovoru. Could you also report the issue here if connection still does not work.
Hope this helps!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

Nokia Updater does not recognize N91 connected via...

My fone has gone loco on me of late.. freezes about 3ce a day, and after deleting EVERY thing on my phone memory without any improvements, i decided to get an update on the software. problem is, the new updater 1.02.03 or sumn.. does not recognize that my phone is connected, even though the new pc suite does when i try it out.. what could i be doing wrong? (yes, i checked, there is an update for the code my phone carries) thanks for the help (i hope i get..)

Hi,
I faced this problem, make sure you have the latest updater and the PC suite installed. The best would be to remove both from your computer and fresh download and install.
Once you have installed it on the PC, now connect the phone (a PC suite is also installed on ur phone during the PC suite installation on the computer). I STRONGLY RECOMMEND THAT YOU USE THE CABLE THAT CAME WITH UR PHONE.
Select PC suite from the phone.
Start the updater as it is starting, u will see the prompt "Phone Disconnected from the PC suite" on your computer.
Now it should (ideally) start the process.
Cheers
NOTE: YOU WILL LOSE ALL DATA.. and FW should be 2.10.xxx (as i think this is the lates one yet)
Cheers
Nokia 8800e-1 (ARTE), V 05.21, 30-11-2007, RM-233
Phones used: Nokia 3600, 6110, 6600, 8210, 8910i, 9500, N70, N91, 8800 SIROCCO
Sony Erricsson: K900, T610
Motorola, V3, L7

Aperture does not recognize camera card.

Aperture does not see camera card iin card reader connected to a USB port, although I can see the card both in iPhoto and with Finder. When I plug it in it shows very briefly in Aperture and then dissapears. This is something new as I have used the software, card and card reader for a couple years and had no porblems. Aperture sees all the other components of the system, including external drives, but only briefly (1 second) the card reader.

Hello John,
If after reformatting the card you still have problems to see your camera in in Aperture you may have a problem with the "Preferences" file.
Remove the file "com.apple.Aperture.plist" from the "Preferences" folder in your User Library, as described in Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805; don't delete the file, just remove it to the Desktop, so you can put it back, if it does not help, for after removing the Preference file all settings will be reset to their default setting.
Léonie
P.S. How do you delete the images from the card, if you do not format the card to erase them? It is not save to let any imaging software on your computer do that, that may corrupt the file system on the card. Your camera knows best how to delete the images.

Desktop Manager does not recognize USB Connection

I have installed the Desktop Manager for MAC (v1.0.2) on my MacBook Pro Snow Leopard10.6.3.
When I connect my Storm 9520 the Mac OS recognizes the media storage drives in the 'Finder'. I can copy files to and from the device media using 'Finder' but the Desktop Manager does not recognize that the device is plugged into the USB (yes I have tried both USB connectors).
file:///Users/Nigel/Desktop/WaitingForUSB.jpg

I have an 8310, Macbook Pro running OSX 10.6 and the BB desktop v 1.0.2 build 8. It recently stopped recognizing the USB connection as well. I was able to sync my BB with the MAC but can no longer do so. The MAC mounts the BB and I can access the SD card. What gives here?

Suddenly, my iPad does not have internet connectivity

Despite strong wifi signals - a 4 bar icon at the top left on my Ipad and iTouch - both on my home network and on the network at a friends, my iPad (IOS 4.3.1) and my 2nd gen iTouch (IOS 4.1) both tell me that I am not connected to the Internet. Nor can I send or receive e-mail.
I have reset network setting; I have renewed the lease and have also fogot the network. I have powered off and then powered on. All to no avail.
I am typing this on my wireless G4 Powerbook while connected to my home system, so the problem does not seem to be with the router.
Hopefully this forum can help me solve this.
Thanks.

Quick inquiry. When you go to Settings/General/Network/Wi-Fi and tap the arrow to the right of the network your iPad thinks that it is connected with, what is the IP address? Is it a 169... IP? If so the iPad is not really connected to anything. It has timed out waiting on the router to supply it with a connection and supplied it own self assigned IP.
Carolyn has given you a link to all of Apple's best knowledge Base articles on Wi-Fi, and each of them are often links to more.
I hope that you sort it out.
Dah•veed

Aperture does not recognize a vault

I have been assembling all my pictures in Aperture and then had to re install the program due to a repair when my disk was wiped. The re install went Ok and Aperture opens but does not recognize a vault I created on an external drive, where all the pictures are stored. How can I get to my pictures?
Thanks in advance

If you renamed your drive after it was wiped out, Aperture will not recognize the vault and will give you a message saying that it isn't a valid vault. This happened to me when I decided to rename an external drive on which I had a vault. I had to rename the drive back to its original name in order for Aperture 3 to recognize the vault. I sent a bug report to Apple on this and asked if this means I have to create new vaults every time I decide to rename a drive.

Can't upgrade iMac to Yosemite "because Mac OS X does not recognize internet addresses starting with "macappstores"

I want to upgrade Snow Leopard (10.6.8) to Yosemite. The download page on Apple website shows that my system meets all requirements;
however, when I click to download I get the following error message. The browser freezes and closing Safari is the only way I can get out of it:
safari cant open "macappstores://itunes.apple.com/webobjects/MZStore.woa/wa/viewSoftware?id=9150 41082&mt=12&ls=1&ign-msr=http%3A%2F%2Fwww.apple.com%2Fosx%2F" because Mac OS X doesn't recognize internet addresses starting with "macappstores"
iMac, purchased new in 2009
Model Identifier: iMac9,1
     OS 10.6.8
Processor Name: Intel Core 2 Duo
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 6 MB
Memory: 2 GB
     Hard drive 320 GB (plenty of unused memory)
Bus Speed: 1.07 GHz
Boot ROM Version: IM91.008D.B08
Please help! What is wrong?

You are probably going to want to upgrade your memory (RAM). While 2 GB is the stated minimum, realistically 4 GB seems to be the consensus minimum. More is better.
The 2 places I’ve seen recommended most to buy reliable RAM are below. I have purchased RAM several times from Other World Computing and have always been very satisfied with the product and service. They have on-line instructions on how to replace the RAM. OWC has also tested RAM above what Apple states is the maximum. I now have 6GB installed on a machine supposedly limited to 4 GB.
Crucial
Other World Computing
Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)
Do a backup before installing.

Aperture does not recognize Internet connection with SmugMug

Similar Messages

Maybe you are looking for